Department Of Local Bodies - Rajasthan

32163595 supply and fixing various park in playing equipment municipal council area dungarpur supply and fixing various park in playing equipment municipal council area dungarpur , providing and installation multi action play system & other children playground equipments consisting of the following itemsthe area of 8 mtr x 7 mtr and required safe area is 9 mtr x 8 mtr ( 1 ) . square deck 5 feet height square deck 5 feet heigt .the platform is made in fiber reinforced plastic. the top of platform is anti skid surface with multi colour pigmented resin .the back coat of fiber reinforced plastic is such that the mat strands are not visible and the surface is tack free. at the top of the deck there is a window canopy shade to the children playing on it. all as per eic. , wave slide 5’ height the wave slide chute with top entry module shall be made by frp, the slide thickness thickness will be 5 mm with uv pigment to avoid colour fading.. the wave shape is given in such a manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion is horizontal with respect to the ground. , frp straight slide 5 feet heightthe straight slide chute with top entry module shall be made by frp, the slide thickness for total will be 5 mm for both side finished. , rock climber 5’ ht.the rock climber is made up of fiber reinforced plastic. rocks are molded on same platform and it has gradient from the ground. the climber is supported by 25 idgi pipe at the bottom for ground support , steel bridge 8’ long the steel bridge is made from 40x40x5 with crc sheet 18 gej & laminated by frp non skid chequred sheet .it has railing made from frp molded process with support of 20 nb gi pipe with the help of 80 idgi pipe and 80 x 20 nb nylon clamps. , frp canopy square canopy should be made up of fiber glass reinforced plastic with 3 to 4 mm thickness with glossy finish and paint by pu paint in multy colors. , frp ladder 5 feet heightfrp ladder should be made by fiber glass reinforced plastic with 4 to 5 mm thickness with antiskid surface. , frp railingthe railing is made in frp molded process .the railings are attached to each other with the help of 20 idgi pipe. , hand railing hand railing should be made by 20 mm idgi pipe to proper control for children’s. there is no any sharp corner not seen on the railing. , frp rindeer andfrp flowerthis is made from fiber glass reinforced plastics for the attraction. , double swing with frp butterflythe leg support of double swing is made by 60 mm idgi pipe while the top bar is of 60 mm idgi pipes. the gi pipes are powder coated. the swing seats are made from 9 mm thick antiskid chequered reinforced rubber belt or 9 mm thick. frp seating arrangement. the ball bearings are mounted inside a specially designed clamp. , spiral climber 5 feet height spiral climber made up of 25 nb gi pipes. the spiral structure is suitably bent and is kept standing with vertical 40 idgi pipe support.make: royal play equipments, kalia recreations noiada up, replay internationspvt ltd, play global mumbai, maharastra, uday creations.all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments.all as per eic. , providing and installation all in one multy play system: area : 10 mtr x 12 meter, safe play area: 11 mtr. x 13 mtr.platform height: 1.5 / 1.8 / 2.1 mtr. providing and installation ofmulty arrangement play system whichis consist towers , v bridge , arch bridge , lemon bridge , connector tube , tire ramp , frp canopy’s , party swing , multy seater see saw , rainbow climber , swing two seater, both types of frp slides , plain ladder , snake shape ladder , tic tack toy steps and different types railing. all work shall be done by as per specification and order by engineer in charge. all as per eic. , towers and decks: all the towers should be made by 40 mm idgi pipe at lag support and platform should be made by 18 swg crc sheet. supporting pipe connected with frp canopy with proper fitment no sharp corner seen on the top and other place on the tower. platform height from ground level 6’ and 7’ and total height from ground level are 13’. and there are proper space for standing 3 4 children’s on all types of deck. , v bridge: v type bridge should be made by 20 mm idgi pipe. in inner frame and 25 mm idgi pipe at outer frame and shall be connected with towers with proper fitting arrangement like nut bolts or proper welding system hand rills and railing should be made by 15 mm idgi pipe. and brightly paint by 3 layers of p.u. paint in multy color. , arch bridge: this bridge should be made by 20 mm idgi pipe. in inner frame and made like cross shapeand 25 mm idgi pipeat outer frame ladder shall be made by 2”x1 / 2” rectangle pipe. and connected like such a way to go one tower to another towers. all the equipment joint cross welding system. there is no any sharp corner on the top of the bridge, all components brightly paint by 3 layers of p.u. paint in multy color. , lemon bridge: lemon bridges outer frame should be made by 25 mm idgi pipe. and handrails should be made by 20 mm idgi pipe. bridges ladders should be made by 2” x ½” rectangle pipe. total length 3.0 mtr. x 0.75 mtr. in half round shape all the equipment joint cross welding system. there is no any sharp corner on the top of the bridge , all componentsbrightly paint by 3 layers of p.u. paint in multy color. , connector tube or circular shape bridge: the connector should be made look like circular shape or round shape supporting pipe shall be made up of 20 mm idgi pipe. and circular shape pipe shall be made up of 25 mm idgi pipe both types of pipe are connected each other with cross wilding arrangement there is proper way to go one deck to another deck.all the components fitted by proper fitments with towers there is no any sharp corner show on the top of the bridge., all components brightly paint by 3 layers of p.u. paint in multy color. , tyre ramp: ramps steel frame should be made by 40 mm idgi pipe and well joint with 6 nos. of heavy duty tyres and connect specifically on the ramp. ramp shall be connected with platform by proper fitting arrangements like nut bolts or proper welding system. handrails and railing should be made by 20 mm idgi pipe. , all components brightly paint by 3 layers of p.u. paint in multy color. , frp canopy: alltypesof frp canopy should be completely made up of fiber glass reinforced plastic heaving thickness 3 mm allover on the canopy proper mounted top of each and every tower , all componentsbrightly paint by 3 layers of p.u. paint in multy color. , 8. plane ladder: the ladders should be made by 25 mm & 20mm idgi pipe and steps should be made by 2” x 1” rectangle pipe of size 100x 25 .proper welding with smooth finishing there is no anythere is proper way to go one deck to another deck.all the components fitted by proper fitments with towers there is no any sharp corner show on the top of the bridge., all components brightly paint by 3 layers of p.u. paint in multy color.creations. , snake type ladder: this ladder should be look like such a snake shape and made by 25 mm idgi pipe for climbing for children’s and connected with side panel of lemon bridge. all the components joint cross welding system. there is no any sharp corner show on the top all components brightly paint by 3 layers of p.u. paint in multy color. , tic tac toy : total 9 nos. of x and o frp cylinders made up of fiber glass reinforced plastic with 8” dia and 9” of length. and fitted on frp window panel. total length of frp window panel are 0.8 mtr. x 0.8 mtr. and fitted left or right side of tyres ramp. paint by pu paint in multy color. , frp wave slide: slide should be made up offiber glass reinforced plastic having thickness 5 mm all over on the slide with both side smooth finishing total length of slide 3.6 mtr. and width 0.6 mtr. slide should be connected with a platform with proper fitment like nut bolts or clam system and brightly paint by 3 layers of the epoxy coated paint. , frp long slide: slide should be made up of fiber glass reinforced plastic having thickness 5 mm all over on the slide with both side smooth finishing total length of slide 3.0 mtr. without joint and width 0.5 mtr. slide should be supported by 20 mm idgi pipe slide should be connected with a platform with proper fitment like nut bolts or clam system and brightly paint by 3 layers of the epoxy coated paint. , straight slide: slide should be made up of fiber glass reinforced plastic having thickness 5 mm all over on the slide with both side smooth finishing total length of slide 4.2 mtr.and width 0.6 slide should besupported by 20 mm idgi pipe slide should be connected with a platform with proper fitment like nut bolts or clam system and brightly paint by 4 layers of the epoxy coated paint. , rainbow climber: rainbow climber shall be made up of25 mm idgi pipeat outer frame and 20 mm idgi pipe in inner frame. total height 2 mtr. from ground level. connected with platform with proper fitment like nut bolts or gross welding system and brightly paint by 4 layers of pu paint. there is no any sharp corner show on the top. , multy seater see saw: there are 1 no. of see saw ( 4 seater ) should be made by 50 mm idgipipe for center support and leg support shall be made up of 40mm nb pipe. hand railing should be made by 20 mm idgi pipe. seating arrangement for children shall be made up of fiber glass reinforced plastic 4 mm frp thickness with smooth finishing and brightly paint by 3 layers of pu paint. there is no any sharp corner show on the top. , swing two seater: its total required area 3 mtr. x 1.5 mtr. and height shall be 2.4 mtr. from ground level top bar of swing is made by 50mm idgi pipe 16 gauge. and 4 nos. of leg support pipe should be 40mm idgi pipe 16 gauge.top bar attach with 2 nos. of alloy steel coasting bearing with gi chain. seating arrangement of swing is made up of 9mm thick. anti skid chequered reinforced rubber belt. bearing should be covered by specially design nylon clamp. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments.and install by c.c. base system as per order by engineer in charge. , party swing 4 seater: party swing should be made by 40 mm idgi pipe and connected on the front slide of the bridge, seating arrangement should be made up of 18 swg crc sheet havingthickness 1.5 , , and laminated by frp plane and smooth sheet. total seating capacity of 4 children’s. all the sharp edges and corner properly grinded to give smooth finishing. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments. and install by c.c. base system as per order by engineer in charge. , providing and installation curve maps: area :5.8 m x 3.0m , safe area :6.8m x 4.0m , total height :3.9 m, platform height:1.5 m, vertical support :3” ( 90mm nb ) , frp ladder railing :¾” ( 25mm nb ) slide support : 1” ( 32mm nb ) slide support : 1” ( 32mm nb ) frp cross panel: 1 no.10’ wave slide o.s.f.: 1 no. 10’ curve slide o.s.f.: 1 no. frp ladder 9 step: 1 no.providing & fixing of curve & wave slide maps having require area 5.8m x 3.0m & total height of 3.9 m.square deck 5’ height: the platform is made in fiber reinforced plastic. the top of platform is anti skid surface with multi colour pigmented resin .the back coat of fiber reinforced plastic is such that the mat strands are not visible and the surface is tack free. it should be made by 18 guage crc sheet with frp non skid lamination and connected leg support pipe should be made by 48mm nb pipe with proper fitment. 10’ frp wave slide: there is 1 no. of frp slide of length 3.0 meter having 5mm thickness connected to the one end of platform. the slide should be made by fiber reinforce plastic having one side finish.10’ frp curve slide: there is 1 no. of frp slide of length 2.4 meter having 5mm thickness connected to the 2nd end of platform. the slide should be made by fiber reinforce plastic. frp ladder: the frp ladder made by fiber reinforce plastic having 9 steps & 1 flange. the railing of ladder made with 25mm nb pipe. all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments. slide should be made in a single mould piece there is no any joint in the slide.frp components should be paint by 3 layers of pu paint. and install by c.c. base system as per order by engineer in charge. , providing and installation playtime, maps joy : safe play area 4.5 mtr. x 3.5 mtr.area – 3.5 mtr. x 5.4. mtr.height 3.6 mtr with canopy providing & fixing maps joy its total required are 3.5 mtr x 5.4 mtr. and consist 4 no. of equipments.01 strate slide should have 2.4 mtr. length and width 0.5 mtr. and made up of frp 5 mm thickness over all. paint free.02 1 no. of square deck platform should be made frp non skid lamination and connected leg support pipe.03 frp canopy fitted on the platform and made up of fiber glass reinforced plastic with 3 mm frp thickness. with 60 mm idgi pipe in leg support.04 bridge climber shall be made by 25 mm idgi pipe and capsule pipe at bottom of the bridge.05 square deck without canopy should be made frp non skid lamination and connected leg support pipe.06 ladder should be made up of 1’’ x 2’’ rec. sq. powder coated pipe for proper footrest of children’s. safety railing and handrills should be made up of 20 and 25 mm nb pipe.all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments. and install by c.c. base system as per order by engineer in charge age capacity 3 12 year.all as per eic. , providing and installation curve maps: area :5.8 m x 3.0m , safe area :6.8m x 4.0m , total height :3.9 m, platform height:1.5 m, vertical support :3” ( 90mm nb ) , frp ladder railing :¾” ( 25mm nb ) slide support : 1” ( 32mm nb ) slide support : 1” ( 32mm nb ) frp cross panel: 1 no.10’ wave slide o.s.f.: 1 no. 10’ curve slide o.s.f.: 1 no. frp ladder 9 step: 1 no.providing & fixing of curve & wave slide maps having require area 5.8m x 3.0m & total height of 3.9 m.square deck 5’ height: the platform is made in fiber reinforced plastic. the top of platform is anti skid surface with multi colour pigmented resin .the back coat of fiber reinforced plastic is such that the mat strands are not visible and the surface is tack free. it should be made by 18 guage crc sheet with frp non skid lamination and connected leg support pipe should be made by 48mm nb pipe with proper fitment. 10’ frp wave slide: there is 1 no. of frp slide of length 3.0 meter having 5mm thickness connected to the one end of platform. the slide should be made by fiber reinforce plastic having one side finish.10’ frp curve slide: there is 1 no. of frp slide of length 2.4 meter having 5mm thickness connected to the 2nd end of platform. the slide should be made by fiber reinforce plastic. frp ladder: the frp ladder made by fiber reinforce plastic having 9 steps & 1 flange. the railing of ladder made with 25mm nb pipe. all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments. slide should be made in a single mould piece there is no any joint in the slide.frp components should be paint by 3 layers of pu paint. and install by c.c. base system as per order by engineer in charge. , providing and installation curve maps.safe play area 5.2 mtr. x 2.5 mtr.area – 4.2 mtr. x 1.5 mtr. height 1.5mtr. its required area 4.2 mtr. x 1.8 mtr. platform height should be 1.5 mtr. from ground level and slide length 2.8 mtr. there is 2 nos. of frp slide should be made by fiber glass reinforced plastic having thickness 5mm overall both side finish. connected with platform should be made by aluminum chequered sheet. leg support of the platform should be made by 50mm idgi pipe 14 gauge. ladder should be made by 32mm idgi pipe.the ladders railing should be made up of 25mm idgi pipe it is design in such a way that a ladder itself has safety railings for the platform. all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments. slide should be made in a single mould piece there is no any joint in the slide.frp components should be paint by 3 layers of pu paint. and install by c.c. base system as per order by engineer in charge.all as per eic. , providing and installation frp multy lane slide : .rec. age: 4 12 yrs. the area : 1.4 m x 1.4 m, safe play area : 2.4 m x 2.4 m this is very simple type of structure similar to the shape of the ladder arranged in criss cross manner. the main frame of this criss cross scrambler is fabricated from 25 nb powder coated gi pipe. there is one centre support of 40 nb gi pipe and horizontal bars of 20 nb pipe. the pipes conforming to is 1239 with gi thickness of 60 ? are powder coated to prevent rusting due to atmospheric condition all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments. and install by c.c. base system as per order by engineer in charge age capacity 4 12 year.all as per eic. , providing and installation criss cross : safe play area 3.4 mtr. x 2.2 mtr. dia .area: 2.4 mtr. 1.2 mtr.height 2.4 mtr. it required area 2.4 mtr x 1.2 mtr & height 2.4 mtr and leg support should made up of 50 mm idgi pipe outer frame should be made by 32 mm idgi pipe in main frame joint with 20 mm idgi pipe in handrails / inner frame in dia. ladder should be made by 20 mm idgi pipe. and connected with proper fitment like welding, fastener.all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments.and install by c.c. base system as per order by engineer in charge age capacity 6 12 year.all as per eic. , providing and installation make hanging climber: safe play area: 4 .6 mtr. x 1.5 mtr.area – 3 mtr. x 0.6 mtr.height: 3.0 mtr.its required area 3.0 mtr. x 0.6 mtr. platform height should be 1.5 mtr. from ground level and slide length 3.69 mtr. slide should be made by fiber glass reinforced plastic having thickness 5mm overall. the back side of slide is surface mat with phantom effect. connected with platform should be made by 16 swg crc sheet with frp non skid lamination. leg support of the platform should be made by 48mm nb pipe 14 gauge. ladder should be made by 32mm nb pipe.the ladders railing should be made up of 25mm nb pipe it is design in such a way that a ladder itself has safety railings for the platform. all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments. slide should be made in a single mould piece there is no any joint in the slide.frp components should be paint by 3 layers of pu paint. and install by c.c. base system as per order by engineer in charge.all as per eic. , providing and installation jumbo slide12’: of3 way flip flopclimber: safe play area 3.1 mtr. x 2.8 mtr. dia. area – 2.1 mtr x 1.8 mtr. height 2.1 mtr. providing and installation of 3 way flip flop climber should be made by 32 mm nbpipe in outer frame and 25 mm nb pipe at inner frame and total height 2.1 mtr. from ground level. and required area 2.1 mtr x 1.8 mtr. all components joint with proper welding arrangement and there are no any sharp corner not seen on the top of the frame. all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments.and install by c.c. base system as per order by engineer in charge age capacity 6 12 year.all as per eic. , providing and installation3 way flip flopclimber: age group: 5 12 yrs. product area : 2.5 m x 0.6 m, safe play area : 3.5 m x 1.6 m, height : 2.40m, material specification: the sky rocker is the most attractive and enjoyable of its kind. the main frame support is made from 80 nb gi pipe. while the top pipe is of 40 nb and 20 nb gi pipe. the top pipe is inserted into a nylon bush which gives the rider a swinging experience to enjoy. all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments.and install by c.c. base system as per order by engineer in charge age capacity 6 12 year.all as per eic. , providing and installationsnake climber: safe play area 4.5 mtr. x 2.0 mtr.area : 3.6 x 1.0 mtr.height 2.4 mtr its height 2.4 mtr. and length should be 3.6 mtr. and width should be 1.0 mtr. and made by 50 mm idgi pipe in vertical support and 32 mm nb pipe in outer frame. handrails should be made by 25 mm idgi pipe. leg support should be 50 mm idgi pipe. ladder should be made by 20 mm idgi pipe.all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments.and install by c.c. base system as per order by engineer in charge age capacity 3 8 year.all as per eic. , providing and installation arch swing four seater : age group: 4 14 yrs. product area : 6.5 m x 1.5 m.safe play area : 7.5 m x 2.5 m.height : 2.40m.material specification: as the name suggests, four children can enjoy the four seater arc swing at one time. the arched shaped side frame is made of 80 nb gi pipes and top pipe is made up of 50 nb gi pipes. the frame is powder coated to give an esthetic look. the four swings are made up of 10 mm thick anti skid chequered reinforced rubber top. the rubber belt seat is suspended on 6 mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp. all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments.and install by c.c. base system as per order by engineer in charge age capacity 6 12 year.all as per eic. , providing and installation standardslide : of safe play area 3.4 mtr. x 1.5 mtr.area – 2.4 mtr. x 1.5 mtr.height 1.2 mtrits required area 2.4 x 1.5 mtr. platform height 1.2 mtr. in ground level should be made by 32mm idgi pipe for leg support. the ladders railing should be made up of 25mm idgi pipe & it is design in such a way that a ladder itself has safety railings of 2”x1” rectangle pipe of size 50 x 25mm for the platform. slide length 2.4 mtr. with 5 mm thickness overall slide chute 0.5 mtr. wide. all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments. and install by c.c. base system as per order by engineer in charge age capacity 3 10 year.all as per eic. , providing and installation eaglesee saw: safe play area – 2.5 mtr. x 3.5 mtr.area – 1.5 mtr. x 2.5 mtr.height – 0.8 mtr. it’s required area 1.5mtr x 2.2mtr. main frame should be made by 80mm idnb centre pipe with proper fitment for installation of see saw.handle should be made by 25 mm idnb pipe. total height 0.5mm from ground level. 2 nos. of sheet made by 3 mm thick frp with proper seating arrangement grouted in cc. foundation base all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments and install by c.c. base system as per order by engineer in charge age capacity 6 12 year.all as per eic. , providing and installation turbo tower : age group: 4 12 yrs. product area : 1.8 m diameter.safe play area : 2.8 m diameter.height : 3.35m.material specification:in this interesting turbo tower the center support is made up of 80 nb powder coated gi pipe. the loops given to the turbo tower are made up of 15 gi powder coated gi pipe. the rings of the turbo tower are made up of 20 nb powder coated gi pipes. the bend pipes are made in 25 nb gi pipes. there is a sufficient distance between the rings for the children climbing on it. all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments. and install by c.c. base system as per order by engineer in charge age capacity 4 to 12 year.all as per eic. , providing and installation spring rider: safe play area – 1.9 mtr. x 1.7 mtr.area – 0.9 mtr. x 0.7 mtr.height – 0.5 mtr. providing & fixing of spring rider its required area 0.9 mtr x 0.7 mtr. total height 0.5mtr from ground level. leg support should be made by 40 mm idgi pipe & handle made by 15 mm nb pipe. seat should be made by frp animal duck / horse shape with 5 mm thick connected with heavy duty spring. all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments. and install by c.c. base system as per order by engineer in charge age capacity 3 12 year.all as per eic. , providing and installation frp spiral slide : , safe play area 3.5 mtr. x 2.7 mtr.area: 2.5 mtr. x 1.7 mtr.height 2.1 mtr.the spiral slide is made up of fiber reinforced plastic ( frp ) in one piece having shell thickness of 4 5 mm. the slide is supported on a center support 80 nb gi pipe. the landing supports of the slide are supported by two 20 nb pipes. the slide ladder steps should be made with 2”x 1” rectangle pipe of size 50 x 25mm. railing should be made by 25 mm nb pipe.the safety railing of the ladder is made25 mm idgi pipe. the spiral slide platform is made up of fiber reinforced plastic ( frp ) . the trade and riser of the ladder are designed in such a way it wont entrap childs foot while playing.all the sharp edges and corners are properly grinded to give smooth finish so that children are not hurt while playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments and install by c.c. base system as per order by engineer in charge age capacity 4 12 year.all as per eic. , providing and installation swing double seatersafe play area 4 mtr. x 2.5 mtr.area: 3 mtr. x 1.5 mtr.height 2.4mtr its total required area 3 mtr. x 1.5 mtr. and height shall be 2.4 mtr. from ground level top bar of swing is made by 60mm idgi pipe. and 4 nos. of leg support pipe should be 60mm idgi pipe.top bar attach with 2 nos. of alloy steel coasting bearing with gi chain. seating arrangement of swing is made up of 10mm thick. anti skid chequered reinforced rubber belt. bearing should be covered by specially design nylon clamp. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments.and install by c.c. base system as per order by engineer in charge. all as per eic. , providing and installation swing double seatersafe play area 3.4 mtr. x 2.2 mtr. dia area: 2.4 mtr. 1.2 mtr.height 2.4 mtr.it required area 2.4 mtr x 1.2 mtr & height 2.4 mtr and leg support should made up of 50 mm idgi pipe outer frame should be made by 32 mm idgi pipe in main frame joint with 20 mm idgi pipe in handrails / inner frame in dia. ladder should be made by 20 mm idgi pipe. and connected with proper fitment like welding, fastener.all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments.and install by c.c. base system as per order by engineer in charge age capacity 6 12 year. , providing and installation.combination set 3 in oneas per specification: age group: 2 4 yrs. product area : 2.0 m x 1.6 m.safe play area : 3.0 m x 2.6 m.safe play area : 3.0 m x 2.6 m.height: 2.40m.material specification: as the name suggests, this item has a combination of three items such as swing, slide and seesaw. the complete frame of this item is fabricated from 20 nb and 25 nb powder coated gi pipes. the slide in the combination set is made up of fiber reinforced plastic ( frp ) . the slide landing support is made in 20 nb pipe. the slides are given a smooth finish so that the child does not hurt itself while playing on it. the bucket swing is made up of frp and is attached to a nylon rope. for the bucket swing a handle is given for gripping, which is made in rotational molding and out of frp. the see saw lever and stand is made up of 20 nb gi pipe. the see saw seat is made out of frp 3 mm. the bearing used is of heavy duty bush type. all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments and install by c.c. base system as per order by engineer in charge age capacity 6 12 year. all as per eic. , providing and installation .combo maps: area:3.95m x 3.95m .safe area :4.85m x 4.85m .height:2.4 m .vertical support : 1.5” ( 48mm nb ) .see saw stand : 1.5” ( 48mm nb ) .see saw center support : 2” ( 60mm nb ) .see saw railing : ¾” ( 25mm nb ) .ladder : 1” ( 32mm nb ) & rectangle pipe 2” x 1” ( 50 x 25mm ) for steps.ladder hand railing : ¾” ( 25mm nb ) .top : 1” ( 32mm nb ) & ¾” ( 25mm nb ) .frp slide length : 2.4 m ( thickness : 5mm ) .frp see saw seats : 12” x 8” ( thickness : 3 mm ) .platform: 2” x ½” ( 50 x 15mm ) rectangle pipe.providing & fixing of combo multiplay having area 3.95 x 3.95 meter. the total height should be above ground level is 2.4 meter. all as per eic. , square deck 4’ height: the platform is made in fiber reinforced plastic. the top of platform is anti skid surface with multi colour pigmented resin .the back coat of fiber reinforced plastic is such that the mat strands are not visible and the surface is tack free. it should be made by 16 gauge crc sheet with frp non skid lamination and connected leg support pipe should be made by 48mm nb pipe with proper fitment. the shape of platform support at one end is arch type. , frp slide 8’: there is 1 no. of frp slide of length 2.4 meter having 5mm thickness connected to the one end of platform. the slide should be made by fiber reinforce plastic 5 mm thick. , see saw single: the main structure made up with 48mm nb pipe & center support of see saw single made in 60mm nb pipe rest on the main stand. the center support is attached with 2 nos. frp seats of size 12” x 8” having thickness 3mm for the seating. the railing of see saw center rod made with 25mm nb pipe. , ladder:ladder should be made with 32mm nb pipes for support & the steps should be made with rectangle pipe of 50 x 25mm. the ladder railing made with 25mm nb pipe. , top climber: the top of the climber made up with 32mm nb & 25mm nb pipe. , all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments. slide should be made in a single mould piece there is no any joint in the slide.frp components should be paint by 3 layers of pu paint. and install by c.c. base system as per order by engineer in charge.all as per eic. , providing and installation of3 way multi action play system mini combo with 4 loop climber : safe play area – 6 mtr. x 4 mtr. area – 5 mtr. x 3 mtr. height – 2.4 mtr. its required area 5mtr x 3mtr and height should be 2.4 mtr. from ground level connected with four nos. of equipments. 1 no. of frp slide should have length 2.4 mtr. x 0.5 mtr. shall be made by frp 5mm thickness overall slide should be connected with item nos. 2 rainbow junior climber should be made by 25mm idgi pipe in outer frame and 20mm nb gi b’ class pipe. inner frame should be connected with platform. platform should be made by 16 g thickness in steel frame and covered by frp non skid sheet. platform should be connected with item no.3 swing single seater having height 2.4 mtr. connected with 40mm nb pipe on top bar and joint with 35 mm nbgi b’ class pipe. for leg support swing made by 6mm. heavy duty chain joint with frp seat should have 5 mm thickness in frp. supporting pipe connected with see saw single board made by 40 mm. nb b class pipe. with have two proper fitting arrangement seat should made by 5 mm frp seat. 1 no of loop climber proper fitted with platform, there is 4 no of loop in climber. all equipments paint by 3 layer of p.u. paint in multi colour or oven baked powder coated whichever is feasible and possible. all as per eic. , providing and installation curve slide: 3 way multi action play system mini combo with 4 loop climber : rec. age: 3 12 yrs.the area : 3.6 x 1.5m.safe play area : 5.1 x 2.5m.height : 1.5m.in this innovative product, the curve part is made from fiberglass reinforced plastic giving it a mirror image. the thickness of the curve slide is 5 mm thick. the center support of the slide is of 80 idgi powder coated gi pipe. all pipes are ‘b’ class pipes, the support structure of the slide is made up of 25 idgi powder coated gi pipe. in order to ensure safety while the ladder railing & steps should be made by 25mm idgi & 2”x 1” rectangle pipe of size 100x25.is given so that the child does not fall while climbing. all the sharp edges and corner properly grinded to give smooth finishing. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments. and install by c.c. base system as per order by engineer in charge. all as per eic. , providing and installation ofcircular swing : the area : 1.5 m x 2 msafe play area : 2.5 m x 3 m.the leg support of this item is made up of 40 mm, while the top bar is from 50 mm powder coated gi pipes. the swing frame is made from 25 mm and 15 mm powder coated gi pipes. there are two seats provided which are made out of fiber reinforced plastic. the platform is made using chequered plate for footrest and bearing assembly is made. all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments. slide should be made in a single mould piece there is no any joint in the slide.frp components should be paint by 3 layers of pu paint. and install by c.c. base system as per order by engineer in charge. all the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. the pure polyester powder coating ( oven baked ) done on the pipes extend the life of equipments. and install by c.c. base system as per order by engineer in charge age capacity 3 10 year.all as per eic. , providing and installation . frp dustbin penguin shape: height 1.3 mtr.thickness: 3 mm in frp. its total height 1.3 mtr. from ground level and made up of fiber glass reinforced plastic with 3mm thicknessand made by complete frp process using 450 gsm mat with resin, hardener and furnish by reputed make pigments in multy colors.paint by 3 layer of p.u. paint in multy color. and install by c.c. base system as per order by engineer in charge.all as per eic. , providing and installationdustbin junior penguin shape: height 0.8 mtr. thickness: 2.5 mm in frp. it should be made by fiber glass reinforced plastic with 2.5 mm frp thickness overall and thickness should be made by 2 layers of 450 gsm roving mat and suspend in unsupported resin in pigment with promoter and exalter. gelcote proposed with using color take pigment of multy color. height should be 0.8 mtr. and capacity should be 50 liter for penguin shape .merry go round ou seater a mery go round is a kids ply equipment primarily for girls these have alwayes been a kids favovrite play giving them funand enjoyment the.circular and easy movement of that make it one of hte most pleasurable joy rides this is one of the most poudar choices in recreaation equimet for the the fun and enjoyments of kids the more in demand play equipment has made us merry go round kids favovrute. all as per eic. , multiplay system , age group 3 12 years , product area 12x12 flt sabe play area 5x15 ft in this product there are three items in 1 multiplay system. the swing hight will be 6 ft with 80 mm nb gi pipe seating arrangement ofswing is made up of 3 mm frp sheet. the height of the slide 6 ft with 4.5mm thikness of frp / gi sheet the sea sawsaw length is 4 5 ft with 60 mm gi pipe. all the sheet edgesand cornenproperly grinded to give smooth finishing so that children are not hurt with playing orit all equipmant will be multi color painted.all as per eic. , merry go round ou seatera mery go round is a kids ply equipment primarily for girls these have alwayes been a kids favovrite play giving them funand enjoyment the.circular and easy movement of that make it one of hte most pleasurable joy rides this is one of the most poudar choices in recreaation equimet for the the fun and enjoyments of kids the more in demand play equipment has made us merry go round kids favovrute.all as per eic....

Urban Improvement Trust - Rajasthan

22908305 maintenance work of planter from antaghar to borkhera robm bajrang nagar steel bridge to s p office and chawani manin road plantation work...

West Central Railway - Rajasthan

20955603 tender for ktps siding: repair & improvement to existing bridges & rehabilitation of existing br no: 02, 51, 52 & 53 ( steel bridges ) in kota thermal power station siding....

Urban Improvement Trust - Rajasthan

17638355 tender for consultancy work for construction of pedestrian steel bridge on chambal river from chhoti samadh rampura to bhuriya dhol, kota => short tender notice...

Border Roads Organisation - Rajasthan

11336772 construction of 40 mtr long maj pmt steel bridge on pile fdn over ignp canal at km 69.00 ( new km 4.875 ( rd 245 ) on rd r t k ) on road jaisalmer ramgarh tanot kishangarh in 95 rcc sector under 45 brtf ( p ) chetak,...

Border Road Organisation - Rajasthan

11296304 re tendering for sub soil investigation, and preparation / submission of sub soil investigation report for construction of 40 meter long maj pmt steel bridge with steel tross....

Border Roads Organisation - Rajasthan

11265277 re tender for sub soil investigation and preparation / submission of sub soil investigation report for construction of 40 meter long maj pmt steel bridge with steel truss on pile foundation over ignp canal...

Border Roads Organisation - Rajasthan

10419379 retender for sub soil investigation and preparation submission of ssi report for construction of 40 mtr long maj pmt steel bridge with steel truss on pile fdn over ignp canal at km 69 ( new km 4.875 ( rd245 ) on rd rtk ) on rd j r t k in 95 rcc...

Border Roads Organisation - Rajasthan

10370694 re tender for sub soil investigation and preparation / submission of sub soil investigation report for construction of 40 meter long maj pmt steel bridge with steel truss on pile foundation over ignp canal...

Border Roads Organisation - Rajasthan

10073134 construction of 40 mtr long maj pmt steel bridge on pile fdn over ignp canal at km 69.00 ( new km 4.875 ( rd 245 ) on r t k ) on road jaisalmer ramgarh tanot kishangarh in 95 rcc under 45 brtf ( p ) chetak ( raj ) r...

Border Roads Organisation - Rajasthan

10045958 sub soil investigation and preparation / submission of sub soil investigation report for construction of 40 mtr long maj pmt steel bridge with truss on pipe foundation over ignp canal at km 69.00 ( new km 4.875 ( rd 245 on road ramgarh tanot kishangarh ) on road jaisalmer ramgarh tanot kishangarh in 95 rcc sector under 45 brtf / project chetak in the state of rajasthan....

Narmada Canal Project - Rajasthan

6531138 jungle clearance and removal of silt, repairs lining, dowel and bank of purawa minor, painting of gauge patties on x/head regulators and slogans on pumping station, silt clearance of chakguda minor lift, construction of transverse drains, rip rap slopes of embankment and protection work, strengthening of canal syphones and construction of steel bridge, syphone and pipe line....