Public Works Department - Rajasthan

37736293 public toilet, water tank with pipe line and youth sports complex near meghwal vikas samiti in kui inda of municipality balasar, construction work of four walls pwd...

Public Works Department - Rajasthan

37504769 construction of sports complex in public park no.2 situated in front of plot no. 143 and 171 ward no. 11 south soorsagar jodhpur ( mla lad ) ...

Public Works Department - Rajasthan

37463198 construction of sports complex in public park no.2 situated in front of plot no. 143 and 171 ward no. 11 south soorsagar jodhpur ( mla lad ) ...

Central Public Works Department - Rajasthan

37450034 construction of sports complex phase ii ( table tennis court and toilets ) at icar cazri, jodhpur ( raj. ) ( civil and electrical work. ) ( sh : providing the services of data entry computer operator for o / o ae ii, cpwd, jodhpur...

Public Works Department - Rajasthan

37150109 construction work of sports complex and various development work at public place parsuran mahadev temple near swinchi gate samahan jodhpur ( mla lad ) ...

Public Works Department - Rajasthan

37125073 construction work of sports complex and various development work at public place parsuran mahadev temple near swinchi gate samahan jodhpur (mla lad)...

Central Public Works Department - Rajasthan

36215980 supplying and laying of ht and lt cables at aiims jodhpur. ( sh providing decorative poles in sac block, chemical earthing sports complex and other area, png line & fire suppression work in girls hostel mess i / c balance electrical work ) ....

Indian Army - Rajasthan

36080078 bids are invited for drainage in sports complex brick sub class b locally best available , river sand locally best available , stone aggregate 20mm , stone aggregate 40mm , stone aggregate 12mm as in coping , cement opc 43 grade 50 kg bag , tmt bar 10mm dia , stone for masonry works locally best available , iron gate , binding wire , brick bats total quantity : 26595...

Public Works Department - Rajasthan

35590891 supply of open air gym equipment installed in sports complex jhalawar thi chi spinner (2 wheel)providing and fixing of thi chi spinner (2 wheel) of size 700mm (length) x 1000mm (width) x 1280mm (height) fabricated with a center pipe of 100nb shall be made up of “c” class g.i. pipe. the handle movement round frame shall be made up from 25 nb “c” class g.i. pipe. the foundation should be used for fixing is a structure and shall be made from center pipe of g.i. of 80 nb “c” class, welded with m.s. round plate of ø250 mm & 10mm thick. main pipe shall be supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. closing caps shall be made up of high quality fiber reinforced plastic material. the pins to be used shall be made up of ø 25 mm of sae8620 bright material. the bearing shall be used of “6201zz” & “6205zz” permanent lubricated sealed bearing of reputed brand (skf/fag). high tensile s.s. nut bolts shall be used for assembly. foundation cover closing cap shall be made from frp material with 0.7 mm thickness. the cerclips used for assembly shall be of of a24 and a11. the nylon bush shall be used for handle knob. the powder coating shall be done with pure polyester powders from ackzonoble or berger paints with 60 to 70 micron thickness. bolt m8x16 mm and nylock nut of m8 shall be made of ss 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust, all complete as per drawing, design, directions and approval of engineer in charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc 2 seated puller providing and fixing of seated puller of size 1900mm (length) x 740mm (width) x 1920mm. (height) fabricated with a center pipe is of 100nb shall be made from “c” class g.i. pipe. bottom support of m.s. round plate of ø 250 mm & 10mm thickness shall be welded. all linkages shall be made up of 25nb “c” class g.i. pipe. the handle frame of 32nb “c” class g.i. pipe. the seat frame of 32nb “c” class g.i. pipe, to build structure bushes to be used which shall be made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush shall be used. the foundation should be used for fixing is a structure and shall be made from center pipe of g.i. of 80 nb “c” class welded with m.s. round plate of ø250 mm & 10mm thick. main pipe shall be supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap shall be made from frp material. the seats and back rests to be fitted on the outer frames shall be made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. closing caps shall be made up of high quality fiber reinforced plastic material. pins to be used of diameter 25mm and 17mm shall be made up from sae 8620 bright material. the bearings shall be used of “ 6205zz” and “6203zz” permanent lubricated sealed bearing of reputed brand (skf/fag). high tensile steel with galvanized nuts & bolts shall be used for assembly. the cerclips to be used for assembly are of a16 the powder coating shall be done with pure polyester powders of ackzonoble or berger paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of engineer in charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc 3 chest pressproviding and fixing of chest press of size 2000mm (length) x 710mm (width) x 2200mm. (height) fabricated with the center pipe of 100nb shall be made up of “c” class g.i. pipe. the bottom shall be welded with support of m.s. round plate of ø250 mm & 10mm thickness. the connecting pipes shall be made up from 25nb “c” class g.i. pipe. the handle frame shall be made up from 32nb “c” class g.i. pipe. to build structure bushes to be used which shall be made from ms seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush shall be used. the foundation should be used for fixing is a structure and shall be made from center pipe of g.i. of 80 nb “c” class welded with m.s. round plate of ø250 mm & 10mm thick. main pipe shall be supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. the seats and back rests to be fitted on the outer frames shall bemade up of m.s. sheet of size 330mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. closing caps shall be made up of high quality fiber reinforced plastic material. foundation cover closing cap shall be made from frp material with 0.7 thickness. pins to be used of diameter 25mm and 17mm shall be made up from sae 8620 bright material. bolt m8x16 mm and nylock nut of m8 shall be made of ss 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust. the bearings shall be used are of “6205zz” & “6203zz” permanent lubricated sealed bearing of reputed brand (skf/fag). high tensile steel with galvanized nuts & bolts shall be used for assembly. the cerclips to be used for locking shall be made up of a24 mm & a16mm. the powder coating shall be done with pure polyester powders from ackzonoble or berger paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of engineer in charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. 4 double twister standingproviding and fixing of double twister standing of size 1500mm (length) x 600mm (width) x 1300mm. (height) fabricated with a center pipe of 100nbshall be made from “c” class g.i. material. the bottom shall be welded with support of m.s. round plate of ø250 mm & 10mm thickness. the bottom frame of 32nb shall be made from “c” class g.i. pipe. the handle frame of 25nb shall be made from “c” class g.i. pipe. the foundation should be used for fixing is a structure and shall be made from center pipe of g.i. of 80 nb”c” class welded with m.s. round plate of ø250 mm & 10mm thick. main pipe shall be supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. the twister plate to be fitted on the bottom frame shall be made up of m.s. round plate of size ø300mm and 10mm thick. closing caps shall be made up of high quality fiber reinforced plastic material. pins to be used of diameter 35 mm shall be made up from sae 8620 bright material. the bearings shall be used are of “6205zz” permanent lubricated sealed bearing of reputed. brand. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powders from ackzonoble or berger paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of engineer in charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc 5 seating & standing twisterproviding and fixing of seating & standing twister of size 1700mm (length) x 540mm (width) x 1250mm. (height) fabricated with a center pipe of 100mm nb shall be made from “c” class g.i. round pipe. the m.s. round plate of ø250 mm & 10mm thickness shall be welded at bottom. handle and bottom sleeve pipe of 125mm od with thickness 5mmshould be provided for easy assembly, replacement and maintenance. the bottom frame of the seating & standing twister of 32 nb, 50 nb, and 25 nbshall be made from “c” class g.i. pipe. the handle frame of seating & standing twister of 25 nb & foot resting frame of seating side shall be made from “c” class g.i. pipe of 25mm nb. the foundation should be used for fixing is a structure and shall be made from center pipe of g.i. of 80 nb “c” class, welded with m.s. round plate of ø250 mm & 10mm thick. main pipe shall be supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crca square pipes of 3mm thickness. the twister plate to be fitted on the bottom frame shall be made up of m.s. round plate of size 300mm diameter and 10mm thickness. closing caps shall be made up of high quality fiber reinforced plastic material. the pins to be used which shall be made up of ø 35 mm sae 8620 bright material. the bearings shall be made of of “6205zz” permanent lubricated sealed bearing of reputed brand (skf/fag). high tensile steel with galvanized nuts & bolts shall be used for assembly. the powder coating shall be done by pure polyester powder of berger paint with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of engineer in charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc ...

Rajasthan State Sports Council - Rajasthan

35304028 cleaning & house keeping work of office building, all sports complex, sports grounds, academy building and synthetic walking track situated in sms stadium, jaipur....

Rajasthan State Sports Council - Rajasthan

35297210 cleaning & house keeping work of office building, all sports complex, sports grounds, academy building and synthetic walking track situated in sms stadium, jaipur...

Public Works Department - Rajasthan

34788511 construction of sports complex and other development near atal bherunath temple situated at siwanchi gate shamshan, jodhpur (mlalad) (electrification work)...

Indian Institute Of Technology - Rajasthan

34763894 supply, fixing, connecting and commissioning of led flood lights along with m s poles, feeder pillar panel etc. as required for 1 each court of basketball, volleyball and lawn tennis court at sports complex building of iit jodhpur...