cha Tenders in Rajasthan

37
Public Health Engineering Department - Rajasthan

36102597 emergent work ( summer contingency ) during summer season 2023 under jen section jhajhu phed sub dn. kolayat supply & installation of 3 phase isi marked submersible motor pump set ofthree star or better rating of beeand as per is: 8034 2018 (pump) and is 9283 2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. 3 11 kw (15 hp) & head above 120 mtr. 4 13 kw (17.5 hp) & head above 120 mtr. 5 15 kw (20 hp) and above, head above 120 mtr. 6 supply & fixing of isi marked three core pvc flat submersible cableas per is 694:1990 or amended up to date and conductor as per class 5 of is 8130:1980including making connection etc. 3 core 6.0 sq.mm 7 supply & fixing of isi marked three core pvc flat submersible cableas per is 694:1990 or amended up to date and conductor as per class 5 of is 8130:1980including making connection etc. 3 core 10.0 sq.mm 8 supply & fixing xlpe insulated / p.v.c. sheathed cable of 1.1 kv grade with aluminium conductor armoured of is:7098 i/1554 1 approved makein ground as per is:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand, second class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 16.0 sq.mm, 4 core 9 providing,lowering, aligning,fixingin positionin pipeline,cid/fsluicevalvesstraight and pocket less body passage of approved make of following pressure rating & dia complete, confirming to is:14846 (amended up to date) and of following specifications: body, bonnet, wedge, gland, thrust plate, cap & hand wheel of grey cast iron of is:210/ fg200stem aisi 410 ,body seat ring, wedge facing ring & bushes ltb2/ ss, face to face dimensions as per is 14846/2000 (amended up to date) ,epoxy ( non toxic suitable for drinking water) applied inside and outside,flanges drilled as per is 1538. nut bolt confirming to is:1363 and is: 1367/ cs/ galvanised steelinsertion rubber of black epdm 6mm thick . sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer in charge. note: rates are exclusive of tail piece/ dismantling joints and earth work. manually operated ci sluice valve of class pn 1.0 10 80 mm hw 11 100 mm hw 12 providing, lowering, aligning, fixing in position in pipe line, ci double flanged swing type non return valves (nrv)of approved make of following pressure rating & dia complete, confirming to is: 5312 (part 1)/ 2004 (amendedup to date) and of following specifications: body, cover & disc of grey cast iron of is:210/ fg200. face to face dimensions as per is 5312 (part 1):2004 , flanges drilled as per is:1538. epoxy(non toxic & suitable for drinking water) applied on body, cover and disc inside and outside . body seat ring of ss/cs door face ring epdm/ neoprene (food grade quality) ,shaft ofss aisi 410 ,hinge malleable cast iron / ss aisi 316 ,bonnet gasket epdm, bush leaded tin bronze/ ptet, gasketepdm/nbr,nut bolt as per is:1363 and is: 1367 (galvanised steel) ,insertion rubber of black epdm 6mm thick. suitablesupport structure as per directions of eic including jointing & jointing material, labour, testing and commissioning along with pipeline as per technical specification & as per direction of engineer in cha rge.note: rates are exclusive of tail piece/ dismantling joints and earth work. class pn 1.0 80 mm dia 13 providing & lowering in tube well isi marked gi pipe medium duty (“b class), steel tube as per is:1239 or amended up to date and zinc coating as per is 4736, threaded and double flanged (welded) on both ends and two number25x3mm ms flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. 14 65 mm dia 15 80mm dia 16 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star delta starter, over load relay,ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom).all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be ofminimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18 and double door including in built locking system.the legs should be embedded in m 15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply. 17 above 15 hp ...

Due Date : February 23, 2023

Tender Value : ₹ 47.29 Lakhs

View Tender
38
Public Health Engineering Department - Rajasthan

36102594 emergent work ( summer contingency ) during summer season 2023 under jen section kolayat phed sub dn. kolayat supply & installation of 3 phase isi marked submersible motor pump set ofthree star or better rating of beeand as per is: 8034 2018 (pump) and is 9283 2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. 3 11 kw (15 hp) & head above 120 mtr. 4 13 kw (17.5 hp) & head above 120 mtr. 5 15 kw (20 hp) and above, head above 120 mtr. 6 supply & fixing of isi marked three core pvc flat submersible cableas per is 694:1990 or amended up to date and conductor as per class 5 of is 8130:1980including making connection etc. 3 core 6.0 sq.mm 7 supply & fixing of isi marked three core pvc flat submersible cableas per is 694:1990 or amended up to date and conductor as per class 5 of is 8130:1980including making connection etc. 3 core 10.0 sq.mm 8 supply & fixing xlpe insulated / p.v.c. sheathed cable of 1.1 kv grade with aluminium conductor armoured of is:7098 i/1554 1 approved makein ground as per is:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand, second class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 16.0 sq.mm, 4 core 9 providing,lowering, aligning,fixingin positionin pipeline,cid/fsluicevalvesstraight and pocket less body passage of approved make of following pressure rating & dia complete, confirming to is:14846 (amended up to date) and of following specifications: body, bonnet, wedge, gland, thrust plate, cap & hand wheel of grey cast iron of is:210/ fg200stem aisi 410 ,body seat ring, wedge facing ring & bushes ltb2/ ss, face to face dimensions as per is 14846/2000 (amended up to date) ,epoxy ( non toxic suitable for drinking water) applied inside and outside,flanges drilled as per is 1538. nut bolt confirming to is:1363 and is: 1367/ cs/ galvanised steelinsertion rubber of black epdm 6mm thick . sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer in charge. note: rates are exclusive of tail piece/ dismantling joints and earth work. manually operated ci sluice valve of class pn 1.0 10 80 mm hw 11 100 mm hw 12 providing, lowering, aligning, fixing in position in pipe line, ci double flanged swing type non return valves (nrv)of approved make of following pressure rating & dia complete, confirming to is: 5312 (part 1)/ 2004 (amendedup to date) and of following specifications: body, cover & disc of grey cast iron of is:210/ fg200. face to face dimensions as per is 5312 (part 1):2004 , flanges drilled as per is:1538. epoxy(non toxic & suitable for drinking water) applied on body, cover and disc inside and outside . body seat ring of ss/cs door face ring epdm/ neoprene (food grade quality) ,shaft ofss aisi 410 ,hinge malleable cast iron / ss aisi 316 ,bonnet gasket epdm, bush leaded tin bronze/ ptet, gasketepdm/nbr,nut bolt as per is:1363 and is: 1367 (galvanised steel) ,insertion rubber of black epdm 6mm thick. suitablesupport structure as per directions of eic including jointing & jointing material, labour, testing and commissioning along with pipeline as per technical specification & as per direction of engineer in cha rge.note: rates are exclusive of tail piece/ dismantling joints and earth work. class pn 1.0 80 mm dia 13 providing & lowering in tube well isi marked gi pipe medium duty (“b class), steel tube as per is:1239 or amended up to date and zinc coating as per is 4736, threaded and double flanged (welded) on both ends and two number25x3mm ms flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. 14 65 mm dia 15 80mm dia 16 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star delta starter, over load relay,ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom).all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be ofminimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18 and double door including in built locking system.the legs should be embedded in m 15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply. 17 above 15 hp ...

Due Date : February 23, 2023

Tender Value : ₹ 46.98 Lakhs

View Tender
39
Hindustan Copper Limited - Rajasthan

35729991 bids are invited for handling and transport on lumpsum basis total multimodal logistics solution for transportation cha activities of kcc origin copper concentrate its handling at kandla or mundra port gujarat for export...

Due Date : April 11, 2023

Tender Value : ₹ 11.76 Crore

View Tender