Public Works Department - Rajasthan

33784404 supply and fixing of furniture for commercial tax office building kota deputy commisioner table(with veneer & pu polish : table with pedestal, side unit & back unit: the main desk is provided with thewire management system. the main table shall be of size: 2400 width mm x 1200mm depth x 750 mm height. top surface of the table shall made up of 50mm thick mdf board duly finished with veneer and final coating of pu high gloss. the maindesk should contain in smart case space slides effortlessly in style. side panel made up of 50mm thick mdf board duly finished with veneer and final coating of pu high gloss. modesty made up of 18mm thick mdf board duly finished with veneer and final coating of pu high gloss. the mobile pedestal shall be of size:480width mm x 640 depth mm x 600 height mm. mobile pedestal shall be made of 18mm thick mdf board duly finished with veneer and final coating of pu high gloss. side unit of size: 1800 width mm x 540 depth mm x 750. the side unit top surface shall made up of 50mm thick mdf board duly finished with veneer and final coating of pu high gloss. modesty, side panel & under structure made up of 18mm thick mdf board duly finished with veneer and final coating of pu high gloss. the back unit of size: 1500 mm width x 450 mm depth x 1800 mm height. the back unit shall be made up of 18mm thick mdf board duly finished with veneer and final coating of pu high gloss. main desk , pedestal, side unit & back unit should be provided with all necessary hardware & fittings etc. .( rates including all taxes) 2 deputy commisioner table: table with pedestal, side unit & back unit: the main desk is provided with the wire management system. the main table shall be of size: 2400 width mm x 1200mm depth x 750 mm height. top surface of the table shall made up of 50mm thick prelaminated mdf board . the maindesk should contain in smart case space slides effortlessly in style. side panel made up of 50mm thick prelaminated mdf board duly finished. modesty made up of 18mm thickprelaminated mdf board duly finished. the mobile pedestal shall be of size :480 width mm x 640 depth mm x 600 height mm. mobile pedestal shall bemadeof 18mm thick pre laminated mdf board duly finishedside unit of size: 1800 width mm x 540 depth mm x 750. the side unit topsurface shall made up of 50mm thick prelaminatedmdf board duly finished . modesty, side panel & understructure made up of 18mmthick prelaminated mdf board duly finished . the back unit of size: 1500 mm width x 450 mm depth x 1800 mm height. the back unit shall be made up of 18mm thick prelaminatedmdf board duly finished . main desk , pedestal, side unit & back unitshould be providedwith all necessary hardware & fittings etc.( rates including all taxes) 3 cto room tabletable with pedestal & sideunit : the main desk is provided with the wire management system.the main table shall be of size: 2100 width mm x 1000 mm depth x 750 mm height. top surface of the table shall made up of 36 mm thick pre laminated mdf board duly finished. the main desk should contain in smart case space slides effortlessly in style. side panel madeup of 36mm thick prelaminatedmdf board duly finished. modesty made up of 18mm thick prelaminatedmdf board duly finished .the mobile pedestal shall be of size: 480 width mm x640 depth mm x 600 height mm. mobile pedestal shall be made of 18mm thick pre laminated mdf board duly finished .side unit ofsize: 1500 width mm x 450 depth mm x 750. the side unit top surface shall made up of 36 mm thick pre laminated mdf board duly finished . modesty, side panel & understructure made up of 18mm thick pre laminated mdf board duly finished( rates including all taxes) 4 acto/ pa room table : table with pedestal & side unit : table size 1800 (w) x 900 (d) x 750 (h) mm .table top made of 25 mm thick plain particle board clad with 0.6 mm thick post formed laminate and 0.6mm thick backing laminate. flat edge duly sealed with 2mm thick pvc beading. modesty panel & side panel made of 18mm thick prelaminated particle board. all exposed edges are sealed with 2mm pvc edge beading. all the pvc edge beading should have press through 200 ° temperature hot melt glue by automatic through feed edge banding machine withcorner rounding function. glide screws is provided at the bottom of the legs for level adjustment. grommets (cut outs) is provided on table top for cabling. grommets is provided with pvc cover.the three drawer unitsize 680(h)x400(w)x450(d).mobile pedestals is placed below table top. mobile pedestals made of 18mm thick pre laminated particle board. the sides of drawers and facia made of 18mm thickpre laminated particle board. back of the pedestal made of 9mm pre laminatedparticle board. pedestal stand alone and not supported to the table top. pedestals have 3 drawer 2 for personal and 1 for lateral files.drawers are provided with single extension telescopic ball bearing slide channels. pedestal is provided with single central locking system, ss handles and four number poly propylene castorsis provided with the pedestal.side unit size 900(w)x450(d)x750(h) mm. table top made of 25 mm thick plain particle board clad with 0.6 mm thick post formed laminate and 0.6mm thick backing laminate. flat edge duly sealed with 2mm thick pvc beading. modesty panel& side panel made of 18mm thick pre laminated particle board. all exposed edgesare sealed with 2mm pvc edge beading.the side shutter and shelves are made of 18mm thick pre laminated particle board. all exposed edges are sealed with 2mm pvc edge beading. all the pvc edge beading should have press through 200 ° temperature hot melt glue by automatic through feed edge banding machine with corner rounding function. the back is made of 18mm thick pre laminated particle board. each unit have lockable double door is fitted with hinges. each unit have one numbers of adjustable shelves.skirting is made of 18mm thick prelaminated particle board.all exposed edges are sealed with 2 mm pvc edge beading. (including all taxes) 5 staff work station linear workstation : 1200x750mm :providing andfixing panel based modular workstations of 45 mm thickness with extruded aluminum end post of size 45x23mm. top trim is of aluminum section of size 45x13.7mm and snap fitted on its base of size 45x 28.4mm. the aluminum framework is supported on lower and upper partition block.bottom block is made up of 9mm pre laminated particle board of desired shade which is pasted on thick particle board batten frame, which is properly screwed to end post and bottom electrical race way.upper block is fixed above the table top and is made up of particle battens fixed with 12 mm thick pin boardand cloth of desired shade, optionally white boardcan be provided instead of pin board.raceway one bottom raceway is provided as standard for drawing wires along the width of panel , additional raceways can be added in the middle of the partition and both above and below the table top.the raceway is covered with 100 mm wide aluminum extruded plates from both sides and snap fitted with aluminum extruded raceway clip of size 86.2x34.3mmconnectors complete system is interconnected with panels in desired layout with the help of 2 way, 3 way, 4 way fittings and aluminum covers.table tops table tops to be made up of 25mm thick pre laminated particle board. exposed edges are covered with 2mm thick pvc edging applied on automatic machine with hot melt glue .the tops are supported on partition with the help of metal brackets.gable end gable end is made up of 18mm pre laminated particleboard of desired shade and screwed to top with help of metal l brackets.drawer unit drawer unit to be made up of 18mm thick pre laminated particle board for outer frame .internal 3 drawers to be made up of 18mm thick pre laminated particle board with 9mm pre laminated bottom. drawer will run on bottom mounted channels. all 3 drawers are locked with center lock. key board tray the keyboard trays are made out of 18mm plpb under the worktop with sliding channels. trays are also available in crca and pvc material.cpu trolly the cpu trolleys are made out of powder coated ms sheet with adjustable width, front & back open & provided with front 2 lockable castors to ease out the wire accessibility from the cpu.all complete as per guiding image, specifications and in working conditions to the satisfaction of engineer in charge. (rate including all taxes) 6 confrence tableconference table: size: 30000 (l) x 680(w) x 750(h) mm. with wire manager. the top shall be 37 mm thick (18 mm mdf + 18 mm mdf + 0.6 mm laminate + 0.4 mm membrane ) edge profile shall be waterfall edge 10 mm radius on top edge and 5 mm at bottom. in understructure the legs shall be made from 25 mm plain mdf having a straight profile with half round edges and with 0.6 mm thick post forming laminate . overall thickness of leg shall be 26.2 mm .the modesty panel in understructure shall be made from pre laminated mdf boards of 18 mm thick with 2mm thick pvc edge beading on all sides. all the pvc edge beading should have press through 200 ° temperature hot melt glue by automatic through feed edge banding machine with corner rounding function. there shall be wire management wire carrier shall be made from 0.6 mm thick crca powder coated and carrier cover shall be made of 12 mm thick mdf painted all over.cutting of sheet should be done on nc operated machine to ensure accuracy of cutting and bending of sheet should be done on cnc operated machine to ensure accuracy of bending. all the metal parts have free from the dent, burrs and sharp edges, is have pickled before stove enamellings to remove grease,rust, scale and any other foreign element before powder coating. the minimum thickness of powder coated should be 40 50 microns. ( rate including all taxes) 7 centertable : the dimension of the table shall be (l) 1200 mm x (w) 600 mm x (h) 450mm, the material of the top shall be plywood with veneer 18mm thick .the table support to be made of teak wood of size 55x22mm.centertable leg to be made of teak wood of size 50x50mm & should be pu polished.(rates including all taxes) 8 square table corner table: the dimension of the table shall be (l) 600 mm x (w) 600 mm x (h)450mm, the material of the top shall be plywood with veneer 18mm thick .the table support to be made of teak wood of size 55x22mm.centertable leg to be made of teak wood of size 50x50mm & should be pu polished.(rates including all taxes) 9 library table : 7500 x 1300x750mm tableare made of pre laminated particle board. tops are made of 45 mm effect with full compact half moon t molding. tops with melamine finish in rosewood. melamine finish provides water, heat & scratch resistant. sides are made of 25 mm with full compact pvc edging. sides with melamine finish in grey. fronts are made of 25 mm with full compact pvc edging. table front with melamine finish in rosewood. all the components are assemble by the imported lock. .(rates including all taxes) 10 computer table : office table with three drawer & key board : over all size 1200(w)x600(d)x750(h) in mm. table top made of 18 mm pre laminated particle board with 2mm thick pvc edge beading on all sides. the modesty panel and sidepanel made of 18mm thickpre laminated particle board. all exposed edges are sealed with 2mm pvc edge beading. all the pvc edge beading should have press through 200 ° temperature hot melt glue by automatic through feed edge banding machine with corner rounding function. 3 drawer unit and key board tray made of 18mm thick pre laminated particle board. all exposed edges are sealed with 2mm pvc edge beading. glide screws is provided at the bottom of the legs for level adjustment. grommets (cutouts) is provided on table top for cabling. grommets is provided with pvc cover. (including all taxes) 11 deputy commisioner chair : highbackchair:the back & seat is made up of 1.2 cm. thick hot pressed plywood up holstered with leatherite and moulded polyurethane foam. the backfoam is designed with contoured lumber support for extra comfort.back size:52.0cm.(w) x 85.0cm.(h) seat size: 52.0cm.(w) x 51.0cm.(d).the polyurethane foam is moulded with density = 45 +/ 2 kg/m3 and hardness = 20+/ 2 for25% compression. seat back connecting spine: the seat and back are arrested together with a 9.0cm (w) spine made of 0.8cm thick. hr steel. cutting of sheet should be done on cnc operated machine to ensure accuracy of cutting and bending of sheet should be done on cnc operated machine to ensure accuracy of bending. the spine is black powder coated. armrest assy: the armrest assy.comprises of three parts viz. the armrest support tube and p.u. armrest and thearmrest top. the armrest tube assy. is made of 2.54cm(1) x 16 bg. m.s. e.r.w.support tubes and chrome plated. the p.u. armrest is made of black integral skin polyurethane with 50 70 shore a hardness and reinforced with m.s. insert. the arm rest top is made of abc & upholstered with foam & pure leather. the mechanism of the chair shall have following features : 360° revolving type, knee tilt system, 5 position locking with antilock back mechanism. tilt tension adjustment and position locking with anti shock back mechanism,which prevents the back rest from impacting the user when the lock is released. the chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0+/ 0.3 cm. the pedestal shall be made of die cast polished aluminum it shall be fitted with 5 nos.twin wheel castor. the size of the pedestal shall be 62.0 +/ 1.0 cm pitch centre dia (70.0 +/ 1.0 cm with castors). the twin wheel castors shall be injection moulded inblack nylon. overall dimensions of chair shall be, width of chair 70.0cm, depth ofchair 70.0 cm as measured from pedestal below with castor. all the metal parts have free from the dent, burrs and sharp edges, is have pickled before stovee namellings to remove grease, rust,scale and any other foreign element before powde rcoating. the minimum thickness of powder coated should be 40 50 microns. ( rates including all taxes) 12 deputy commisioner visitor chair : visitor chair: the back & seat is made up of 1.2 cm. thick hot pressed ply wood up holstered with leatherite and moulded polyurethane foam. the back foam is designed with contoured lumber support for extra comfort. back size: 48.0cm.(w) x65.0 cm. (h) seat size : 48.0 cm. (w) x 48.0 cm. (d).the poly urethane foam is moulded with density = 45+/ 2kg/m 3 and hardness=20+/ 2 for25% compression. seat back connecting spine: the seat and back are arrested together with a 9.0cm (w) spine made of 0.8cm thick. hr steel. cutting of sheet should be done on cnc operated machine to ensure accuracy of cutting and bending of sheet should be done on cnc operated machine to ensure accuracy of bending.the spine is black powder coated. the tubular frame is cantilever type & made of 4.0cm x 2.0cmx 0.2cm.thk m.s. e.r.w tube .bending of tube should bedone on cnc operated machine to ensure accuracy of bending of tube. all themetal parts have free from the dent, burrs and sharp edges, is have pickled before stovee namellings to remove grease, rust, scale and any other foreign element before powder coating. the minimum thickness of powder coated should be 40 50microns( rates including all taxes) 13 cto/acto chair : mid back chair the cushioned seat assembly consists of insert moulded polyurethane foam upholstered with foam laminated mesh fabric.the insert moulded foamis assembeled overa load bearing plastic seat cover. the back made up of two piece injection moulded frame. the inner frame is upholstered with mesh fabric and mounted on the main assembly. size of back (w) 48.5cm, (h) 62.0cm & size of seat (w) 51.0cm x (d) 52.5cm. armrest are injection moulded with height adjustable up to 4.5cm in 3 steps and width adjustable up to 20mm. the mechanism of chair have following features:360 degree revolving type, front pivot synchro mechanism, tilt tension adjustment, 3 position tilt limiter with anti shock feature. spine bracket made of aluminium die cast piece connecting back with mechanism. the chair is provided with pneumatic height adjustment which shall have stroke of 10.0cm.the pedestal made of die cast polished aluminium. it fitted with 5 nos twin wheel castor. the size of the pedestal 62.0cm pitch centre dia (70.0cm with castors).the twin wheel castors are injection moulded in black nylon( rates including all taxes) 14 cto/acto visitor chair: the cushioned seat assembly consists of insert moulded polyurethane foam upholstered with foam laminated mesh fabric.the insert moulded foam is assembeled over a load bearing plastic seat cover. the back made up of two piece injection moulded frame. the inner frame is upholstered with mesh fabric and mounted on the main assembly. size of back (w) 48.5cm, (h) 62.0cm & size of seat (w) 51.0cm x (d) 52.5cm. the sled base leg frame welded assembly made from ms erw round tube of 25mm with 2mm thick with base plate for seat fixing. bending of tube should be done on cnc operated machine to ensure accuracy of bending of tube.visitor chair frame is chrome coated. ( rates including all taxes) 15 pa/computer chair : high back chair : the seat and back are made up of 1.2 cm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with pvc lipping all around.the back foam is designed with contoured lumber support for extra comfort. back foam size 470(w) x720(h) mm. seat foam size 480(w)x 465(d)mm.the one piece armrest made of black integral skin polyurethane with 50 70shore ‘a’ hardness and reinforced with m.s. insert. the armrests are fitted to theseat with seat/armrest connecting strip assembly made of 0.6cm thick. hr steel.cutting of sheet should be done on nc operated machine to ensure accuracy of cutting and bending of sheet should be done on cnc operated machine to ensure accuracy of bending.the center tilt mechanism shall be designed as 360°revolving type,17°±2°maximum tilt on pivotat center, up right position locking, tilt tension adjustment. the pneumatic height adjustment have an adjustment stroke of 12.0cm.thetelescopic bellow as: the bellow is 3 piece telescopic type and injection molded in black polypropylene .the pedestal is injection molded in black 30% glass filled nylon. a 10.5 dia forged bright zine plated m.s. caster pinpress fitted into each prong for holding the castors. the pedestal shall be 700 mm pitch centre dia. (750 mm with castors).the twin wheel casters are made of nylon .overall dimensions of chair as measured from pedestal width 75. cm and depth 75.0cm. all the metal parts have free from the dent, burrs and sharp edges, is have pickled before stovee namellings to remove grease, rust, scale and any other foreign element before powder coating. the minimum thickness of powder coated should be 40 50microns. (rates including all taxes) 16 conference chair : chair revolving chairof size ( h 1280 x d 650 ) is made up of is made up of 13.5 mm thick hot pressed plywood upholstered with leatherette and polyurethane foam (hd foam) and the back is made up 12 mm. thick hot pressed plywood upholstered with leatherette and molded polyurethane foam (hd foam) with theback ply and foam is designed to provide maximum lumber support for comfortable seating posture. the baseseat is of size ( w 520 x d 420 x t 110 ) and back seat of size( w 520 x d 600 x t 100 ). (rates including all taxes) 17 computer chair : mid back chair: seat & back made of 12mm thick hot pressed plywood, with fabric and moulded polyurethane foam. the back foam is designed with contoured lumber support for extra comfort. back foam size 500(w) x490(h) mm. seat foam size 500(w)x 465(d) mm. the seat cover shall be injection moulded in black co polymer polypropylene and back cover is vacuum formed from abs sheets. theone piece armrest made of black integral skin polyurethane with 50 70 shore ‘a’hardness and reinforced with m.s. insert. the armrests are scratch and weatherresistant. the armrests are fitted to the seat with seat/armrest connecting strip assembly made of 0.6cm thick. hr steel. cutting of sheet should be done on cnc operated machine to ensure accuracy of cutting and bending of sheet should be done on cnc operated machine to ensure accuracy of bending.the center tilt mechanism shall be designed as 360° revolving type, 17° ±2° maximum tilt on pivotat center, upright position locking, tilt tension adjustment. the pneumatic height adjustment shall have an adjustment stroke of 12.0 ±0.3cm. the telescopic bellow as: the bellow is 3 piece telescopic type and injection molded in black polypropylene.the pedestal is injection molded in black 30% glass filled nylon .a10.5 dia forged bright zine plated m.s. caster pin shall be press fitted into eachprong for holding the castors. the pedestal shall be 700 mm pitch centre dia. (750mm with castors).the twin wheel casters are made of nylon. overall dimensions of chair as measured from pedestal width 75. cm and depth 75.0cm. all the metal parts have free from the dent, burrs and sharp edges, is have pickled before stovee namellings to remove grease, rust,scale and any other foreign element beforepowder coating.the minimum thickness of powder coated should be 40 50microns. (rates including all taxes) 18 public seating desk : providing & fixing 3 seater metal perfo waiting chairs with 600mm x 1800mm x 800mm arms fb/perforated seat and back for l 3ch up. powder coated perforated steel seat and back. chrome plated steel base and armrest with upholstered cushion back and seat. (rates including all taxes) 19 2 seater sofa : providing and fixing in position sofa size: 1500mm (w)x 650mm (d) x 720 mm (h) x 390 mm (sh)providing frame of size 75x75 mm, the structure to be in teak wood frame, for seat, back and arms with 9mm thick bwr ply (710 grade) cladding for façade, side and back or as mentioned in the drawing with reqd. hardware as per drawing.all the surfaces of the ply and wood shall include providing and applying two coats of fire retardant paint and wood preservative paint. the seat, back and arm rest to be in 50 grade high density polyutherene form covered with recron polyfill for softer seating comfort and half natural italian leather of approve make and thickness.legs to be provided with rubber/pvc shoes. hd u foam including making round edge etc with approved cloth upholstery of rs.1250/mtras per detail design & drawings.all exposed surfaces to be duly melamine polished of approved shade. (rates including all taxes) 20 sofa set 5 seater (3 +2) : sofa 3+1+1: size of 1 seater sofa shall be 1010 (l) 920 mm (w) 950 (h) seating area length 560 mm & seating area width 510mm. size of 3 seater sofa shall be1960 (l) 920 mm (w) 950 (h) seating area length 1520 mm & seating area width 510mm. the frame material to be tropical wood + pine wood, length of s spring to be 510 mm, width of belt to be 40mm. there should be pocket on each side of sofa. the seat foam & back foam density to be 40kg/m3 up holstered with leatherette. the material for handle and leg to be wood and should be polish. (rates including all taxes) 21 file unit : open file unit : overall size 1050(w)x450(d)x750(h) in mm. the open file unit made of 18 mm pre laminated particle board with 2mm thick pvc edge beading on all sides. all exposed edges are sealed with 2mm pvc edge beading. all the pvc edge beading should have press through 200 ° temperature hot melt glue by automatic through feed edge banding machine with corner rounding function.glide screws is provided at the bottom of the legs for level adjustment. (rates including all taxes) 22 ss dinning table with 6 chair for canteen : dinning table: table providing & placing dinning table of stainless steel grade 202 of size 1800mmw x 900mm d x 750mm h. understructure to be made up of 40x40x1.2mm thick. ss hollow pipes with foot rest at the height of 75mm. two loop legs with table top frame & added middle horizontal support (along the width in top frame for 1800w). top & understructure should be welded. complete base structure to be in welded construction. provision for levellers should be given for adjusting height if required. dinning chair : shall be tubular ms chrome plated 25diameter, 1.6 mm thickness with leg reinforcement and 12mm thick polymoulded for seat at 450mm h and diameter of seat shall be 400 mm. 23 newspaper stand : providing and placing newspaper stand of size 900 x 400 x 900 made with fully welded steel construction rigid but light in weight and the powder coated finishthree side is coverd with 22 g steel sheet, round pipe of 25mm 18 gauge and heavy duty 75mm nylon castors for easy moment (rates including all taxes) 24 podium : overall dimension shall be h 1200 x w 750/600 x d 450mm.podium shall be made of 18mm thick mdf board isi marked. the podium shall be post formed. the base shall be of 25mm commercial ply isi marked. laminate shall be used 0.6 for post form. one shelf shall be provided below the top. the self shall be mounted on telescopic channels. bottom shelf shall be 70mm above base. the base shall be fixed on post form strips of 150mm width.the edge banding shall be done by 2mm thick pvc tape by hot pressed machine of matching colour. the overall appearance of the product shall be as per photograph (rates including all taxes) ...

RAJASTHAN COUNCIL OF SCHOOL EDUCATION - Rajasthan

33688823 furniture supply for schools district kota furniture supply for schools district kota , class room table ( dual desk ) with attached chair the product should be in complete knock down structure as much as possible / feasible enabling ease in transportation and assemblies within classrooms. the panels are made from16 gauge ms sheetthickall sides. top dimension shall be 1048 x 378mm. top height shall be 750mm. seat dimension shall be 1048 x 335mm. seat height shall be 437mm. back dimensions shall be 1048 x 265mm. size may vary + / 5mm. the under structure is made of erw tubes [ is 7138 ] 25.4 ±0.3mm x 25.4 ±0.3mm x1.2 ±0.096mm thick powder coated 50microns ( ±10 ) at base which are welded to the desk and seat supports that are made of ms c sections 29+ / 0.3mm x 24.9+ / 0.3mm x 1.2+ / 0.096mm thick powder coated 50microns ( ±10 ) . stiffeners that are provided between the 2 vertical frames at base and back of seat are made from erw tubes [ is 7138 ] 25.4 ±0.3mm x 25.4 ±0.3mm x1.2 ±0.096mm thick powder coated 50microns ( ±10 ) . the tubes are closed with plastic caps. additional horizontal supports of erw tubes [ is 7138 ] 25.4 ±0.3mm x 25.4 ±0.3mm x1.2 ±0.096mm thick powder coated 50microns ( ±10 ) are placed between front legs and between back legs to add the rigidity of the structure. the storage shelves are made from 1mm ±0.09mm thick powder coated 50 microns ( ±10 ) ms sheet which is affixed below the desk top. hooks are provided on either sides of the vertical frame of the desk, for hanging bags / bottles. they are made from 6.0 mm dia ms rods powder coated 50microns ( ±10 ) the under structure is assembled using m5 trilobular taptite screws. nylon studs are provided on bottom side of rh / lh frame. all fabricated parts which require welding are mig / spot welded. the screw joining wooden panels to under structure are chip board screws. all steel structural components shall be made from virgin material and tested conforming to is: 513 / is: 10748 / is: 2062 / is: 7138. recycled steel will not be accepted. top understructure – 960mm ( w ) x 310mm ( d ) . back panel support – 960mm ( w ) x 325mm ( h ) . seat support – 960mm ( w ) x 280mm ( d ) . 3d view is as under: , teacher tablethe product should be in complete knock down structure as much as possible / feasible enabling ease in transportation and assemblies within classrooms. the table shall have 1199 ( w ) x 590 ( d ) x 750 ( h ) . the work surface of the table shall be 18 + / 0.5 mm thick pre laminated mdf board ( is14587 ) top with 2 mm thick pvc edge beading on all sides. the understurcture shall be c frame of 0.9+ / 0.09 mm thick powder coated 50 microns ( + / 10 ) crca ms. the tubular frame shall be of dia.25.4+ / 0.3 mm x 1.2+ / 0.096 mm thick ms erw round tubes. it shall have 3 drawer unit & shall be 355.5 mm w x 559 mm d x 433.5 mm h, with shell of 0.5+ / 0.07 mm thick crca ms & drawer tray of 0.5+ / 0.07 mm thick crca ms & drawer front of 0.8+ / 0.1 mm thick crca ms & the drawer friction slide shall have 1.2 mm thick crca ms & lock shall be of 10 lever cam lock. handles shall be built in plastic.all fabricated parts which require welding are mig / spot welded. the screw joining wooden panels to under structure are chip board screws. all steel structural components shall be made from virgin material and tested conforming to is: 513 / is: 10748 / is: 2062 / is: 7138. recycled steel will not be accepted. top under structure frame – 1165mm ( w ) x 558mm ( d ) . , teacher chair the seat and back are made from seasoned wood, caned and finished with synthetic paint ( colour: black ) . back size: 38.1cm ( w ) x 39.0cm ( h ) . seat size: 38.1 cm ( w ) x 42.4cm ( d ) . the cane is produced from blends of high and low density polyethylene. the cane high tensile strength at break=1400 kg / cm2 ( min. ) & elongation at break=54% maximum. the understurcture assembly is a cantilever type frame made of dia. 2.54+ / 0.03cm x0.2+ / 0.016cm thick m.s. e.r.w. tube and powder coated. ( dft 40 60 microns ) . wood used in the manufacturing of seat and back should be free from defects, termite free and after caning should bear a load of 130kg in fitted position. also there should be no permanent deformation or structural changes in the frame structre on apply of this load. at the bottom of frame lugs should be press fitted in punched holes in the frame structure. all steel structural components shall be made from virgin material and tested conforming to is: 513 / is: 10748 / is: 2062 / is: 7138. recycled steel will not be accepted , library table the product should be in complete knock down condition as much as possible / feasible enabling ease in transportation and assemblies within premises. top size: 2300x1100 x 750mm ( h ) . the worktop will be made of 25mm thick mdf board ( is14587 ) with post forming laminate and balancing laminate. post forming on two longer side and two short side pvc lipping 2.0 mm thk..the under structureis made from 38±0.3 mm x 38± 0.3mm x 1.5 ±0.128 mm thick ms tubewith powder coated 50 microns ( ±10 ) ( is 7138 ) at base which are welded and are fixed to top with chip board screws. under structure size 2220mm x 1020mm and 2 additional middile support of 1020mm. the bottom ends are closed with plastic buffers. the cross members are made from 38±0.3mm x 38±0.3mm x1.5±0.128 mm thk mstube at base which are mig welded and are bolted to side frames. the bottom stiffeners are connected with hexagonal bolts. all fabricated parts which require welding are mig / spot welded. the screw joining wooden panels to under structure are chip board screws. all steel structural components shall be made from virgin material and tested conforming to is: 513 / is: 10748 / is: 2062 / is: 7138. recycled steel will not be accepted , library chairthe seat & back shell of chair shall be injection moulded polypropylene. seat size – 46.0ccm ( w ) x 38.0cm. ( d ) . back size – 41.0cm ( w ) x 40.0cm ( h ) . tubular under structure the tubular under structure is fabricated from dia 1.9+ / 0.02cm x 0.1+ / 0.008cm thk. ss202 grade tube welded together with ss connecting rod dia 0.8+ / 0.0058cm. the under structure is provided with black pp injection moulded ferrules. , library book rack double sidedthe product should be in complete knock down condition as much as possible / feasible enabling ease in transportation and assemblies within premises product size: width 900mm, height: 1850mm, depth: 600mm. construction: rigid knockdown construction. material: crca 0.9mm thickness. finish: epoxy polyester powder coated to thethickness of 50 microns ( + / 10 ) .number of adjustable shelf: five adjustable shelves on one side ( total 12 loading levels ) . uniformly distributed load capacity per each shelf is 80 kg maximum. shelf back stiffener : at the rear side of the shelves back stiffeners are provided. these act as separators between front & rear books. label holder & range indicator: label holder & range indicator on each main unit for inserting labels. the powder coated components are on regular basis tested for scratch resistance test of 4 kgs & for impact resistance test for 150kgs / cm. all steel structural components shall be made from virgin material and tested conforming to is: 513 / is: 10748 / is: 2062 / is: 7138. recycled steel will not be accepted. , library book shelfalmirah size shall be 916 mm ( w ) x 486 mm ( d ) x 1980 mm ( h ) excluding levellers. it shall made of 0.7 mm thk ( + / 0.07mm ) crca for shelf, 0.8 mm thk ( + / 0.08mm ) high yield strength crca for doors and back & 0.9 mm thk ( + / 0.08mm ) crca for all other components. construction shall be welded construction. *crca d grade as per is:513. crca d grade high yield strength as per is:513. construction shall be welded construction. locking and handle – brass handle, two way locking mechanism with shooting bolt.height wise 4 nos of adjustable shelf shall be provided with uniformly distributed load capacity per each full shelf is 40 kg maximum. m10 screw type leveller with hex plastic base. outer finish shall be epoxy polyester powder coated to the thickness of 50 microns ( + / 10 ) . ) . all steel structural components are processed shall be made from virgin and tested conforming to is: 513 / is: 10748 / is: 2062 / is: 7138. the powder coated components are on regular basis tested for scratch resistance test of 4 kgs & for impact resistance test for 150kgs / cm. recycled steel will not be accepted , computer table the product should be in complete knock down condition as much as possible / feasible enabling ease in transportation and assemblies within premesis dimension of the table shall be 1200 x 600 x 745mm. table should accompanied with keyboard, pullout tray. the desk panel is made from 25±0.5mm thk pre – laminated mdf board ( is14587 ) with 2 mm thick pvc beadings on all sides. the under structure is made of 50.8±0.3x25.4±0.3mmx1.6±0.096mm thick powder coated erw tubes as per ( is 7138 ) at base which are welded to the vertical channels made of 1.2±0.09mm thick powder coated micron 50 ( ±10 ) ms “ c “ sections. the footrest is 1.2mm thk fabricated from ms sheet in c shape and modesty panel is 0.8mm thk – 1185mm x 200mm. footrest and modesty panels are provided for overall stability of product . the cpu stand is made up of 25.4mmx1.2mm thick erw tubes, which is thereafter hooked on with the side frame . the tubes are closed with plastic ldpe caps. nylon level adjuster of m8 size are provided to take care of unevenness in floor. all the metal parts shall be processed and fabricated in modern press shop. in case of welding, all joints shall be welded. all metal parts should be powder coated, before powder coating all metal parts shall be given anti rust phosphate treatment. all metal parts shall be epoxy polyester powder coated and backed at 180 c in a converyorised oven. all steel structural components are processed shall be made from virgin material and tested conforming to is: 513 / is: 10748 / is: 2062 / is: 7138. the powder coated components are on regular basis tested for scratch resistance test of 4 kgs & for impact resistance test for 150kgs / cm.recycled steel will not be accepted. understructure construction – width is flush type and depth shall be 540mm , computer chair the seat and back are made up of 1.2+ / 0.1 cm thick hot pressed plywood, upholstered with fabric and moulded polyurethane foam with pvc lipping all around. the back foam is designed with contoured lumbar support for extra comfort. ( low back ) size: 39.0cm. ( w ) x 32.0cm. ( h ) . seat size: 43.0cm. ( w ) x 41.0cm. ( d ) . the hr polyurethane foam is moulded with density = 45 + / 2 kg / m cube and hardness load 16+ / 2 kgf as per is:7888 for 25% compression. the frame is made up of 2.54+ / 0.03cm x 0.2+ / 0.016cm thk m.s.e.r.w. tube and black powder coated ( dft 40 60 microns ) .all steel structural components shall be made from virgin and tested conforming to is: 513 / is: 10748 / is: 2062 / is: 7138. recycled steel will not be accepted. seat of the chair should withstand a load of 130 kg. there should be no deformation or structural change in the understructure on application of above said load , computer teachers tablethe product should be in complete knock down structure as much as possible / feasible enabling ease in transportation and assemblies within classrooms. the table shall have 1199 ( w ) x 590 ( d ) x 750 ( h ) . the worksurface of the table shall be 18 + / 0.5mm thick pre laminated mdf board ( is14587 ) top with 2mm thick pvc edge beading on all sides. the understurcture shall be c frame of 0.9+ / 0.09 mm thick powder coated 50 microns ( + / 10 ) crca ms. the tubular frame shall be of dia.25.4+ / 0.3mm x 1.2+ / 0.096mmthick ms eru round tubes. it shall have 3 drawer unit & shall be 355.5mm w x 559mm d x 433.5mm h, with shell of 0.5+ / 0.07 mm thick crca ms & drawer tray of 0.5+ / 0.07 mm thick crca ms & drawe front of 0.8+ / 0.1 mm thick crca ms & the drawer friction slide shall have 1.2 mm thick crca ms & lock shall be of 10 lever cam lock. handles shall be built in plastic.all fabricated parts which require welding are mig / spot welded. the screw joining wooden panels to under structure are chip board screws all steel structural components shall be made from virgin material and tested conforming to is: 513 / is: 10748 / is: 2062 / is: 7138. recycled will not be accepted , computer teacher chairthe seat and back are made from seasoned wood, caned and finished with synthetic paint ( colour: black ) . back size: 38.1cm ( w ) x 39.0cm ( h ) . seat size: 38.1cm ( w ) x 42.4cm ( d ) . the cane is produced from blends of high and low density polyethylene. the cane high tensile strength at break=1400 kg / cm2 ( min. ) & elongation at break=54% maximum. the understructure assembly is a cantilever type frame made of dia. 2.54+ / 0.03cm x0.2+ / 0.016cm thick m.s. e.r.w. tube and powder coated. ( dft 40 60 microns ) . wood used in the manufacturing of seat and back should be free from defects, termite free and after caning should bear a load of 130kg in fitted position. also there should be no permanent deformation or structural change in the frame structre on apply of this load. at the bottom of frame lugs should be press fitted in punched holes in the frame structure. all steel structural components shall be made from virgin material and tested conforming to is: 513 / is: 10748 / is: 2062 / is: 7138. recycled steel will not be accepted , stool for science laboverall dimension of the stool shall be 420mm x 420mm x 600mm ( h ) .square stool is of fixed height with pre laminatedmdf top with 2mm pvc edge bending and rest structure is ms powder coated. structure made ofms square pipe – 32mm x 32mm x 1.6mm thickness. shoe – neoprene. top shall be made of 18mm thick prelaminated mdf board of dimension 305mm x 305mm. finish of metal shall be powder coated , visitor chair the seat and back are made from seasoned wood, caned and finished with synthetic paint ( colour: black ) . back size: 38.1cm ( w ) x 39.0cm ( h ) . seat size: 38.1cm ( w ) x 42.4cm ( d ) . the cane is produced from blends of high and low density polyethylene. the cane high tensile strength at break=1400 kg / cm2 ( min. ) & elongation at break=54% maximum. the understructure assembly is a cantilever type frame made of dia. 2.54+ / 0.03cm x0.2+ / 0.016cm thick m.s. e.r.w. tube and powder coated. ( dft 40 60 microns ) . wood used in the manufacturing of seat and back should be free from defects, termite free and after caning should bear a load of 130kg in fitted position. also there should be no permanent deformation or structural change in the frame structre on apply of this load. at the bottom of frame lugs should be press fitted in punched holes in the frame structure. all steel structural components shall be made from virgin material and tested conforming to is: 513 / is: 10748 / is: 2062 / is: 7138. recycled steel will not be accepted , steel almirahalmirah size shall be 916 mm ( w ) x 486 mm ( d ) x 1981 mm ( h ) excluding levellers. it shall made of 0.9 mm thk ( + / 0.07mm ) * crca for shelf, 1.00 mm thk ( + / 0.08mm ) ** high yield strength crca for doors and back & 0.9 mm thk ( + / 0.08mm ) * crca for all other components. construction shall be welded construction. *crca d grade as per is:513. **crca d grade high yield strength as per is:513. full height steel hinged door shall be provided. mazak handle shall be provided having 3 way locking mechanism with shooting bolt arrangement. height wise 4 nos of adjustable shelf shall be provided with uniformly distributed load capacity per each full shelf is 40 kg maximum. m10 screw type leveler with hex plastic base. outer finish shall be epoxy polyester powder coated to the thickness of 50 microns ( + / 10 ) . ) . almirah size shall be 916 mm ( w ) x 486 mm ( d ) x 1980 mm ( h ) excluding levellers. it shall made of 0.9 mm thk ( + / 0.07mm ) * crca for shelf, 1.00 mm thk ( + / 0.08mm ) ** high yield strength crca for doors and back & 1.00 mm thk ( + / 0.08mm ) * crca for all other components. construction shall be welded construction. *crca d grade as per is:513. **crca d grade high yield strength as per is:513. construction shall be welded construction. locking and handle – brass handle, two way locking mechanism with shooting bolt.height wise 4 nos of adjustable shelf shall be provided with uniformly distributed load capacity per each full shelf is 40 kg maximum. m10 screw type leveler with hex plastic base. outer finish shall be epoxy polyester powder coated to the thickness of 50 microns ( + / 10 ) . ) .all steel structural components shall be made from virgin material and tested conforming to is: 513 / is: 10748 / is: 2062 / is: 7138. recycled steel will not be accepted. , steel almirah with glass door almirah size shall be 916 mm ( w ) x 486 mm ( d ) x 1980 mm ( h ) excluding levellers. it shall made of 0.7 mm thk ( + / 0.07mm ) * crca for shelf, 0.8 mm thk ( + / 0.08mm ) ** high yield strength crca for doors and back & 0.9 mm thk ( + / 0.08mm ) * crca for all other components. construction shall be welded construction. *crca d grade as per is:513. **crca d grade high yield strength as per is:513. construction shall be welded construction. locking and handle – brass handle, two way locking mechanism with shooting bolt.height wise 4 nos of adjustable shelf shall be provided with uniformly distributed load capacity per each full shelf is 40 kg maximum. m10 screw type leveler with hex plastic base. outer finish shall be epoxy polyester powder coated to the thickness of 50 microns ( + / 10 ) . ) . all steel structural components are processed shall be made from virgin material and tested conforming to is: 513 / is: 10748 / is: 2062 / is: 7138. the powder coated components are on regular basis tested for scratch resistance test of 4 kgs & for impact resistance test for 150kgs / cm.all steel structural components shall be made from virgin material and tested conforming to is: 513 / is: 10748 / is: 2062 / is: 7138. recycled steel will not be accepted. , table for art / craft / culture room the product should be in complete knock down condition as much as possible / feasible enabling ease in transportation and assemblies within premesis. top size: 2300x1100 x 750mm ( h ) . the worktop will be made of 25mm thick mdf board ( is14587 ) with post forming laminate and balancing laminate. post forming on two longer side and two short side pvc lipping 2.0mm thk..the under structureis made from 38±0.3 mm x 38± 0.3mm x 1.5 ±0.128 mm thk ms tubewith powder coated 50microns ( ±10 ) ( is 7138 ) at base which are welded and are fixed to top with chip board screws. understructure size 2220mm x 1020mm and 2 additional middile support of 1020mm. the bottom ends are closed with plastic buffers. the cross members are made from 38±0.3mm x 38±0.3mm x1.5±0.128 mm thk mstube at base which are mig welded and are bolted to side frames. the bottom stiffners are connected with hexagonal bolts. all fabricated parts which require welding are mig / spot welded. the screw joining wooden panels to under structure are chip board screws. all steel structural components shall be made from virgin material and tested conforming to is: 513 / is: 10748 / is: 2062 / is: 7138. recycled steel will not be accepted , display board p / f 12mm thick silotex board commercial ply backing with fabric duly ironed and pasted on the expossed side and double folded on the edges duly stapled at 25 mm interval with concealed hanging arrangement routered within 12 mm ply. all the sided duly finished with 6mm x 25mm edge beading with rounded edges duly nailed to the 12 mm ply backing pasted with adhesive. all the joints to be mitred and to be at 90 degreesize –900 x 1200 mm...

RAJASTHAN COUNCIL OF SCHOOL EDUCATION - Rajasthan

33554650 civil work at ggups sanskrit punras block tarangar civil work at ggups sanskrit punras block tarangar 1.02 earth work in excavation by mechanical means (hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 m , disposed earth to be levelled and neatly dressed:all kinds of soil 1.03 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 1.04 brick masonry with f.p.s. bricks of class designation 75 in foundation and plinth with bricks cement mortar 1 : 6 (1 cement : 6 coarse sand) 1.05 providing & laying chequered terrazzo tiles of approved make 22mm thick with marble chips of size upto 6mm, in floors, jointed with neat cement slurry mixed wit pigment to match the shade of tiles including rubbing and polishing complete in all respect as per specification, on 28mm thick bed of c.m. 1:4 :dark shade using ordinary cement. 1.06 providing and laying in position specified grade of cement concrete for all rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( as required) excluding the cost of centering, shuttering and reinforcement. m20 grade nominal mix / design mix providing m 25 grade concrete by using min 410 kg of cement per cum instead of m 20 grade design mix. 1.07 centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. walls (any thickness) including attached pilasters, buttresses plinth and string course. 1.08 centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. 1.09 providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( as required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix (slab & lintel) 1.10 brick work with clay flyash f.p.s. brick (is 13757 1993 ) of class designation 75 in superstructure above plinth level upto floor five level in : cement mortar 1 : 6 (1 cement : 6 coarse sand) 1.11 stone kharanja: random rubble dry stone kharanja under floor 1.12 half brick masnory with clay flyash f.p.s. brick (is 13757 1993 ) of class designation 75 in superstructure above plinth level upto floor five level in : cement mortar 1 : 4 (1 cement : 4 coarse sand) 1.13 providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo mechanically treated bars (conforming of relevent is code) 1.14 structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete. 40×40×5mm 3kg per rmt 1.15 providing and fixing m.s. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of engg. incharge but excluding cost of chowkhats: including two coats of anit corrosive red oxide primer paint extra for double leaf shutters. 1.16 providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (is 1038 1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :partly fixed and partly openable [ fixed area not to exceed 33%] 1.17 supplying and fixing fixed wire gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150 mm distance.14 mesh x 24 gauge 1.18 guard bars:providing and fixing square bars or other flat welded to window, ventilatiors etc. 1.19 providing and laying ceramic mat floor tiles (thickness to be specified by the manufacturer) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown of any size, laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing in white cement mixed with pigment of matching shade complete. 1.20 providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to is : 13753 & is :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 1.21 plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 12mm thick. 1.22 plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. 1.23 plaster(ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3 fine sand) 1.24 painting exterior surface of wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect.new work 1.25 painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work 1.26 m15 grade nominal mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). 2.00 part b sanetary work 2.01 provinding and fixing 3 layer pp r (polyproylene random copolymer) pipes sdr 7.4 uv stabilized & antimicrobial fusion welded, having thermal stability for hot and cold water supply including all pp r plain and brass threaded polypropylene random fittings and fixing the pipe with clamps at 1.00 spacing. this includes testing of joint complete as per direction of engineer incharge.(internal work exposed on wall)pn 16 pipe, 25 mm od 2.02 provinding and fixing 3 layer pp r (polyproylene random copolymer) pipes sdr 7.4 uv stabilized & antimicrobial fusion welded, having thermal stability for hot and cold water supply including all pp r plain and brass threaded polypropylene random fittings and fixing the pipe with clamps at 1.00 spacing. this includes testing of joint complete as per direction of engineer incharge.(internal work exposed on wall)pn 16 pipe, 16 mm od 2.03 p & f squatting pan ( indian type ) white glaze viterous china 1st quality w.c. pan ( is: 2556 mark) with 100 mm viterous china p or s trap including cutting & making good the wall & loor (excluding a pair of foot rest ) size 510 mm 2.04 p & f wvc wash basin (1st quality, i.s. : 2556 mark) of approved make with c.i. brackets duly painted, 1 no. 15 mm c.p. pillar cock (is : 8934 mark) & 32 mm c.p. brass waste coupling of approved make,25 mm g.i. waste pipe complete including cutting & making good the wall.: 450 x 300 mm 2.05 p & f bib cock (is : 8931 mark) superior quality of approved make.c.p. brass 400 gm, 15 mm nominal bore. 2.06 p&f rigid pvc pipe (is:4985 mark) class ii/ (4 kg. /cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia 2.07 p& f waste coulping with fittings of approved quality /make:c.p. brass 40 mm dia 2.08 p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: bend 87.5 110mm dia 2.09 pipe clip 110 mm dia 2.10 p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant plain floor trap 110 mm dia 2.11 p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant p trap 110 mm dia 2.12 p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant vent cowel 110 mm dia 2.13 p & f wvc ( is :2556 mark) squatting urinal of standard make complete including cutting & making good the floor size 450 x 350mm 2.14 s/f rcc main hole covers with frame of approved make (light duty) size 450x450 mm 2.15 p/f grating of approved quality stainiese steet sheet size 125 mm dia 2.16 construction of soakage well in all types of soil of approved drawing , top 90 cm portion in 450 mm thick with cement mortar 1:6 80 mm stone slab covering jointing of slab in cm 1 : 3, ralthal, kharanja, 40 mm thick m 15 grade c.c. flooring earthwork etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr.inner dia 90 cm & 10 to 12 m deep 2.17 construction of chamber in all types of soil with 300 mm thick masnory in cm. 1 : 6, 100 mm thick c.c. 1 : 5 : 10 in foundation , 20 mm thick inside plaster in cm 1 : 6, finished with floating neat cement 50 mm thick m 15 grade c.c. flooring earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.inside size 300 x 300 mm depth upto 0.5 m & 5 kg ci cover with frame. 2.18 p & f 15 mm dia connection pipe of approved quality make pvc pipes with nuts 450 mm. 2.19 p & f full way valve (is : 778 mark) or wheel valve of approved make. gun metal 15 mm nominal bore. 2.20 p & f stop cock (is:8931 mark),superior quality and of approved mark: brass 400 gm. 15 mm nominal bore 2.21 p&f gi pipes (external work) with gi fittings excluding union (si: 1239 mark) including trenching and refilling each etc. 15 mm dia nominal bore b class 2.22 p & f pvc storage tank isi marked ( is : 12701) indicating the bis license no. of approved make with cover , 25mm dia 1 m long g.i. overflow pipe & 25 cm long wash out pipe with plug & socket including making connection etc. complete of approved design 500 litres capacity ...

Urban Improvement Trust - Rajasthan

33117971 various civil works and maintenance works in sub division i area of division ii b ( arc ) civil works clearing and grubbing road land including uprooting rank vegetation, grass, brush, shrubs, saplings and trees of girth upto 300mm, removal of stumps, disposal of unserviceable material and stacking of serviceable material upto 1000m from road boundary. (morth specification : clause 201).by manual means : in area of light jungle 2 clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. 3 silt clearance of drains, channels and canals with lift 1.5 mtr. and lead up to 50 mtr. 4 earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils 5 add extra over item no. 1.8 and 1.9 (sechedule item no 1) for every additional lift of 1.5 m or part thereof : 6 above 1.50 to 3.00m 7 m 35,60mm thick to be used in light traffic (light traffic is defined as a daily traffic up to 150 commercial vehicles exceeding 30 kn laden weight, or an wquivalent up to 0.5 million standerd axles (msa) for a design life of 20 years (a standerd axle is defind as a single axle load of 81.6 kn ) like pedestrain plazes, shopping complexes ramps, car parks, office drveways , housing colonies , office complexes , rural roads with low volume traffic ,fram houses, beach sites, tourist resorts, local authority footwys ,residential roads, etc. 8 category bdenated only two side like i,z,t shape etc. as per irc sp 63:2004 9 random rubble dry stone kharanja under floor. 10 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering all work up to plinth level. 11 m10 grade nominal mix, 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). 12 providing and laying in position specified grade ofcement concrete forall rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. m20 grade nominal mix 13 providing and laying in position specified grade ofcement concrete for rcc structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcementfor walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix 14 providing and laying in position specified grade ofcement concrete for rcc structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcementfor beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix 15 centering and shuttering with plywood or steel plate including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. 16 anti termite treatment of floor using imidacloprid 30.5% ec non repellent, odorless, low dose, environimentally safe terniticide with rapid action non corrosive stain free manufactured by bayer or equivalent company by drilling 12mm diameter holes 300mm apart injecting the emulsion as specified by the manufacturer and plugging with cement mortar 1:2 ( 1 cement : 2 coarse sand) in the whole floor area dpe 12mm dia termitube system with required number of junction boxes are to be installed. the termitube will run all along the perimeter wall both inside and outside. in the middle area the termitube to be installed at an interval of 1.00 mtr. or less both ways as required with sufficient number of junction boxes to pump the emulsion. after successful testing of termitube, pesticide emulsion of imidacloprid 30.5% ec mixed with water in the ration of 1:474 will be pumped by a motorized spray pump from the junction box in specified manner. the plinth area of the area treated will be measured for payment. 17 centering & shuttering with plywood or steel plate including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor three level for : 18 columns, pillars, posts and struts etc. 19 random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in: 20 cement mortar 1:6 ( 1 cement : 6 sand). 21 cement mortar 1:4 ( 1 cement : 4 sand). 22 cement mortar 1:3 ( 1 cement : 3 sand). 23 random rubble stone masonry with hard stone in superstructure aboveplinth level and upto three levelabove 30cm. thick walls in : 24 cement mortar 1:3 ( 1 cement : 3 sand). 25 cement mortar 1:4 ( 1 cement : 4 sand). 26 cement mortar 1:6 ( 1 cement : 6 sand). 27 pointingonstonemasonryincementsandmortar 1:3 (1 cement : 3 sand) : 28 flush / ruled/ struck or weathered pointing. 29 providing and laying damp proof course with cement concrete grade m 150 (1 : 2 : 4) mortar prepared with 1% solution of water proof compound complete and not applying 2 coats of hot bitumen complete as per specifications. 75mm thick 30 50mm thick 31 75 mm thick 32 centering & shuttering with plywood or steel plate including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor three level for : 33 suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc. 34 providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. 35 thermo mechanically treated bars (conforming of relevent is code) 36 flyash flyash brick work with flyash flyash bricks of class designation 75 in superstructure above plinth level upto floor three level in all shapes and sizes in : 37 cement mortar 1 : 4 (1 cement : 4 coarse sand) 38 cement mortar 1 : 6 (1 cement : 6 coarse sand) 39 half flyash brick masonry in foundation & plinth using flyash bricks of designation 75 40 cement mortar 1 : 4 (1 cement : 4 coarse sand) 41 plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 42 12mm thick. 43 20mm thick. 44 6 mm thick cement plaster to ceiling of mix1:3 (1cement : 3 fine sand) 45 making grooves as per design in plaster 10mm to 20mm wide. 46 providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth complete 47 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : 48 two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect. 49 painting exterior surface ofwallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect. 50 new work 51 providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 52 painting with synthetic enamel paint of approved brand and manufacture togive an even shade : 53 two or more coats on new work 54 150cm high fencing with angle iron 50x50x6mm. placed at every 3mtr. apart 30cm. in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth post to be strutted with 50x50x6mm. angle iron provided with 6 horizontal lines and two diagonals of black barbed wire between two posts fitted and fixed with g.i. staples including earth work in excavation etc. complete. 55 grading roof for water proofing treatment withwater proffing compound 56 cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 57 providing and fixing pressed steel door frames confirming to is 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike plate and shock absorbers as specified and applyinga coat of approved steel primer after pre treatment of the surface including filling with cc 1:2:4(m15 grade) complete as directed by engineer in charge : 58 profile b 59 providing and fixing external grade board solid core single leaf flush door shutters isi 2202 67 marked using phenol formal dehyderesinin glue both sides with approved steel fittings complete as per annexure a: 30 mm thick . 60 decorative teak veneer both side 61 providing and fixingaluminum workfor doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate z sections and other sections of approved make conforming to is :733 and is :1285,fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required pvc/neoprene felt etc. aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle aluminium snap beading for glazing /paneling , c.p. brass/ stainless steel screws al. tower bolt & al. handle & al. aldrop etc.,all complete as per architectural drawings and thedirections of engineer in – charge .(glazing and paneling to be paid for separately). : for fixed portion 62 polyester powder coating aluminum( minimum thickness of powder coating 50 micron) 63 providing and fixing of plastic shutter infill made from extruded multi chamber hollow p.v.c. section having cross section of 200 x 20 x 1 mm and shutter frame made from extrude p.v.c. section in the configuration of double walled c section having an overall cross section of 40 x 37 mm and door fittings such as hinges, aldrop, handles, stopper, locking bolt will be provided. 64 providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (is 1038 1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :partly fixed and partly openable [ fixed area not to exceed 33%] 65 for shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). 66 polyester powder coating aluminum( minimum thickness of powder coating 50 micron) 67 providing and fixing superior quality like hardvyn or equivalent hydraulic door closure. 68 providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to is : 13753 & is :15622 of size 300mm x 450mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 69 providing and fixing 1st quality mat finished ceremic tile size 300x300mm confirmingto is : 13755 and is : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 70 providing and fixing 15 to 20 mm thick granite stone slab mirror polished and machine edge cut in walls, pillars, steps, shelves, sills counters, floors etc. laid on 12 mm (av.) thick base of cement mortar 1 : 3 (1 cement : 3 coarse sand) jointing with white cement mortar 1 : 2 (1 white cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of : 71 good quality south black above 3601 cm2 slabs 72 extra for providing edge moulding to 15 18mm thick marble/ granite stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge. 73 granite work (full edge moulding ) 74 p & f 1st quality heavy duty vitrified glazed mat tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to is 15622 of approved make in all colour and shade, laid with 20 mm thick cm 1: 4 including grounting the joints with white cement and matching pigment etc complete. 75 size600 mm x 1200mm 76 providing & fixingbrown kota/ mandana / dholpur/ slate stone incladding / flooring structuralbase with white cement & tinex chemical& ss clamp and fasteners (of approved brand) laid and jointed with white cement slurry mixed with pigment to match the shade of the slab as per drawing attachedcomplete in all respect as per direction of engineer in charge & architect with all lead & lift. the stone measurement will be done of outer most dimension. thickness of stone 25 30mm. 77 polished blue kota stone flooring skirting, laid over 20 mm thick base of c.m. 1 : 4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete :for area of each slab from 901 to 2000 sq.cm : 78 25 mm thick slab. 79 s/f of fire bricks on edg flooring with fire bricks suitable for 1300 degree centigrade safe working temperature as per is :8 specification laid on & filling of joint by fire resistant mortar/adhesive of required thickness as per directed on a bed of 20 mm thick 1:2 cement mortar of bricks 9 x 4.5x 3 (rate approved year 2008) 80 providing and fixing of glass moisac tiles ( bisseze marke ) size 20 x 20 x 4 mm applied with aaproved adhesive as per specification and direction of engineer in charge 81 providing and fixing staincase railing 90 cm high from nosing of made offollowing specifications. 82 50 mm outer dia (2 mm thick) s.s. pipe hand rail. 83 40 mm outer dia (2 mm thick) s.s. pipe baluster @ 1.00 mtr. 84 4 nos. 20 mm fs. s pipe intermediate runners parallel to hand. 85 s.s. shoe 1.60 mm thick 75 mm outer dia. at each baluster 86 baluster to be welded with s.s. plate 50 mm dia (3 mm thick) anchored in c.c. block with suitable dash fastners 87 50 mm dia & 2 mm thick s.s. pipe for start and end vertical ornamental posts to be provided as per direction of engineer in charge 88 the stainless steel work shall be brushed steel finish with all joints/welds properly grinded to final finish. the stainless steel shall be 304 grade and shall confirm to relevant i.s. 89 providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.extra if square,rectangular hollow tubularsections are used or grill made by flats only 90 decorative plaster work with spectrum textured coating as per approved colour and shade complete as per manufactures specifications. 91 grit textured @ 2.5 to 3.0 mm thick. 92 ornamental cement plaster in cement sand mortar1 : 4 making kangooras etc. as per jaipurpractice. 93 supplying and fixing machine cutdressed 75 mm pinksand stone (bansi paharpur) dasa/ coping wth ornamental shape having moulding and pan shape engraving as per required pattern with engraving depth of 5 mm (average) in single piece of length 90 cm to be laid on cement mortar 1:4 (12 to 20mm thick) including pointing with admixture of pigment matching with the stone shade. 94 providing corrugated g.s. sheet roofing including vertical / curved surface fixed with polymer coated j or l hooks, bolts and nuts 8 mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. 95 0.63 mm thick with zinc coating not less than 275 gm/m2 96 supply & spreading ofgood earth at site complete including loading unloading & transportation etc. 97 supply of dry manure including loading unloading,transportation & stacking at site. 98 farm yard manure(organic) 99 spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately). 100 laying of lawns including ploughing levelling breaking of clods manuring & removal of stones etc.(cost of manure or extra good earth to be paid seperately) maintenance of lawns for 30 daysor more till the grass forms a thick lawns free from weeds & fit fo 101 in rows 7.5 cms. apart in either direction 102 construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8 10 tonne to meet requirement of table 300 2 including cost of compensation for earth taken from private land with lead upto 1 km as per morth specification : clause no. 305. 103 rough chisel dressed stone flooring over 20 mm (av.) thick base in cm 1 : 6 including pointing with cement mortar 1 : 2 (1 cement : 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15 mm : 35 mm thick red sand stone. 104 p & f european type white glazed vitreous china 1st quality double syphonic w.c (is :2556 mark) with p or s trap including cutting and making good the wall and floor 105 p & f indian type white glazed vitreous china 1st quality w.c. orissa pan (is :2556 mark) with 100 mm vitreous china p or s trap including cutting and making good the wall and floor: 106 size 580x440mm. 107 p & f low level flushing cistern of 10 ltr. capacity (is : 2556 mark) o9f approved make with colplete fitting ,c.i. brackets duly painted , brass ball cock with ball, (is :1703 mark)complete including cutting and making good the wall. 108 wvc with c.p. brass bend. 109 p & f wvc wash basin (1st quality, i.s. : 2556 mark) of approved make with c.i. brackets duly painted, 1 no. 15 mm c.p. pillar cock (is : 8934 mark) &32 mm c.p. brass waste coupling of approved make, 25 mm g.i. waste pipe complete including cutting & making good the wall.: 110 size 550 mm x 400 mm dia for counter top 111 1.0 mm thick salem stainless steel aisi 304 & is 13983 1994kitchen sink of approved make (nirali, neel – kanth, jaina, faber castell )with large waste coupling. 112 (24 x 18 x 8) (20x16x8) 113 p & f inlet connection (angle valves) superior quality, of approved make, for wash basin, gyser etc. 114 c.p. inlet connection 15mm.brass (is : 8931 marked) with 37 cm long pipe and nut. 115 p & f pvc storage tank isi marked (is : 12701) indicating thebis license no),of approved make with cover, 25mm dia 1m long g.i. over flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 116 1000 litres capacity. 117 providing and fixingsuperior quality (jaguar contiental ) cp brassfittings complete as per direction of ei 118 bib cock with long thread 15 mm nominal size 119 brass / gunmetalhalf turnwt. 1 kg.ofapprovedquality / make,25mmnominalbore. 120 p & f full way valve (is:778 mark) or wheel valve of approved make 121 gun metal 32mm nominal bore. 122 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. (concealed work including cutting chases and making good the walls etc.,) 123 20mm nominal outer dia pipes 124 32mm nominal outer dia pipes 125 p&f rigid pvc pipe (is:4985 mark) class ii/ (4 kg. /cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. 126 110 mm dia 127 160 mm dia 128 p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality / make including joining the pipe with solvent cement rubber ring and lubricant: 129 coupler (socket) 130 110mm dia 131 160 mm dia 132 plain tee 133 110mm dia 134 160mm dia 135 door tee 136 110mm dia 137 bend 45 138 110mm dia 139 vent cowel 140 110mm dia 141 door bend (left & right) 142 110mm dia 143 pipe clip 144 110mm dia 145 plain floor trap 146 110mm dia 147 p trap 148 110mm dia 149 socket plug 150 110mm dia 151 door cap 152 110mm dia 153 construction of chamber in all type of soil with 300 mm thick masonry in cm 1:6 m 10 cm thick c.c. 1:5:10 in foundation, 20mm thick insider plaster in cm 1:6, finished with floating neat cement, 50mm thick m 15 grade c.c. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. 154 do size 450 x 450mm depth upto0.5 m cement cover with frame 155 wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) ofapproved make in surface / recessed isi marked medium duty pvc conduit & its accessories, round tiles,hot dipped galvanized modular box with earth terminal, 6 a modular switch,modular plate with grid plate,screws,making connections, testing etc. as required. 156 short point (up to 3 mtr.) 157 medium point (up to 6 mtr.) 158 long point(up to 10 mtr..) 159 wiring of twin control light point with 1.5 sq.mm fr pvc insulated unsheathed flexiable copper conductor 1.1 kv grade and 1.5 sq.mm.fr pvc insulated unsheathed flexiable copper earth conductor 1.1 kv grade(is: 694) of approved make in surface/ recessd isi marked medium duty pvc conduit & its accessories, round tiles, 18 swg m.s. box with earthing terminal, 6 amp two way switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. 160 medium point (up to 6 mtr) 161 wiring of 3 pin 6 amp light plug point with 1.5 sq.mm fr pvc insulated unsheathed flexiable copper conductor 1.1 kv grade and 1.5 sq.mm.fr pvc insulated unsheathed flexiable copper conductor 1.1 kv grade(is: 694) of approved make in surface/ recessd isi marked medium duty pvc conduit & its accessories, round tiles, 18 swg m.s. box with earthing terminal, 6 amp switch & 6 amp socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. 162 on board 163 medium point (up to 6 mtr) 164 long point (up to 10 mtr) 165 s&f following sizes (dia.) of isi marked medium duty pvc conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall, covering conduit and making good the same as required. 166 25 mm 167 32 mm 168 50 mm 169 supplying and fixing of power plug point modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost ofmodular 16 amp. switch and socket outlet, making connection , testing , etc. as required. 170 p&f metal clad industrial plug top & socket unit with pin and sleeve type contact on porcelain/ bakelite base in sheet steel enclosure (without mcb) including making connections, testing etc.as required 171 single / double pole(three pin) 172 32 a 173 providing & fixing isi marked 6 amp bakelite batten/angle holder including making connection testing etc. as required. 174 supplying and drawing fr pvc insulated & unsheathed flexible copper conductor isi marked (is:694) of 1.1 kv grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required. 175 2 x 2.5 sq. mm. + 1x1.5sqmm 176 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 177 p&f 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c/ d tripping characteristic) isi marked is 8828(1996)]/ conforming to iec 60898 in existing board/sheets including making connections, testing etc. as required. 178 single pole mcb 179 6 a to 32 a rating 180 four pole mcb 181 40 a 63 a rating 182 four pole mcb 183 6 a to 32 a rating 184 p&f recessed/ surface mounting heavy duty horizontal type sheet steel distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to is13032 & is8623 including making internal dbterminations with copper lugs , testing etc. as required. 185 double door (single phase) 186 12 way 187 double door (three phase) 188 8 way 189 p/laying p.v.c./ xlpe insulated & p.v.c. sheathed cable of 1.1 kv grade with aluminium conductor of is:1554 p i / is :7098 p i of group 1 of approved makein ground as per is:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand,iind class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 190 25.0 sq.mm 191 4 core 192 50.0 sq.mm 193 120.0 sq,mm 194 3.5 core 195 150.0 sq,mm 196 supplying and making one end termination with heavy duty single compression brass gland sibg type, heavy duty aluminium lugs duly crimped with crimping tool, pvc tape etc for following size of armoured pvc insulated & pvc sheathed/ xlpe aluminium conductor cable of 1100 volt grade as required of size. 197 3.5 x 120.0 sq.mm 198 4 x 25.0 sq.mm 199 p/laying p.v.c./ xlpe insulated & p.v.c. sheathed cable of 1.1 kv grade with copper conductor of is:1554 p i / is :7098 p i of group 1 of approved makein ground as per is:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand,iind class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 200 10.0 sq.mm 201 4 core 202 supplying and making one end termination with heavy duty single compression brass gland sibg type, heavy duty copper lugs duly crimped with crimping tool, pvc tape etc for following size of armoured pvc insulated & pvc sheathed/ xlpe aluminium conductor cable of 1100 volt grade as required of size. 203 4 x 10.0 sq.mm 204 sitc of wall/ free standing floor mounted dust and vermin proof compartmentalisedcubical panel made out of crca sheet , required hardware,duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shadethe panel having pu/ neoprene rubber gasket of not less than 3mm thickness , separate detachable gland plate m.s. base channel ,hinged door with locking arrangement for equipment/switchgear. thickness of sheet shallnot be less than 1.6 mm up to 600 mm length / widthof any compartment and be of 2.0 mm above 600 mm. load bearing structure shall beof 2.0 mmthick sheet supported by base m.s. channel if required . side walls and cable alley compartments having bolted type doors with / withoutdetachable extension type structure. (only outer area on all sides shall be measured & panel to be fabricated from cpri approved fabricator) 205 supplying and fixing of aluminium / copper bus barby means of smc / dmc type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable pvc sleeves. 206 electrolytic grade aluminium bus bar 207 sf of (0 500) v range volt meter on existing panel , making connection by pvc insulated copper conductor with pvc sleeves / channel etc. as required. 208 analog type ( 96mm x 96mm ) 209 sf of ct operated direct reading typeampere meter on existing panel , making connection by pvc insulated copper conductor with pvc sleeves / channel etc. as required. 210 analog type ( 96mm x 96mm ) 211 below 500 a 212 sf ofcurrent transformer, with all necessary support in existing panel including connection etc. as required . 213 up to 150/5 ratio, 10 va, class 1 accuracy 214 sf of selector switch of 10 a for voltmeter (4 position ) including making connection etc.as required . 215 sf of ct linked selector switch of 10 aforampere meter (4 position ) including making connection etc.as required . 216 sf of110/220 v, led (22.5 mm dia ) indicatinglamp with integral circuit, terminal block, including connection etc. as required. 217 red/yellow/green colour 218 supplying and drawing fr pvc insulated & unsheathed flexiable copper conductor isi marked (is:694) of 1.1 kv grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 219 1 x 1.5 sq.mm 220 1 x 2.5 sq.mm 221 1 x 4.0 sq.mm 222 1 x 6.0 sq.mm 223 sitc of self healing mpp/mp type shunt capacitor (banks) conforming to is:13340 41 / iec :831 1&2 in existing panel or parallel with load terminals , the capacitor shall be fitted with discharge resistors, pressure sensitive disconnector ( psd ) and shall have dissipation factor less than 0.0025 at 50 hz and total wattage loss less than 0.5 watt per kvar . including making connections with suitable capacity conductors/cables testing etc. as required. 224 heavy duty three phase 440 v , 50 hz capacitor (bank) 225 sitc of microprocessor based three phase sensingpower factor correction relay having following sensing capacitysecondary current , self analysing auto c/k setting according to targeted power factor setting, the relay shall havedigit display unit for display of real power factor, targeted power factor, lag/lead capacitor switching status, alarm output for under current, over current, insufficient compensation, indication of switching on units, auto/manual status, and shall have over load protection, no volt release , having multi parameter like kw, kva, kvar,metering facility as required. 226 6 to 8 stage 227 sensitivity upto 50 milli amp 228 p & f ofcam operated rotary switchs on existing panel with 2 way and off postion 229 one pole 230 16 amp 231 p & f of440 volt 3 pole capacitor(ac 6 b ) duty contactor with 3 no. early make and post break auxiliary contacts in series with quick discharge damping resistors/ reactors to limit the inrush current, conforming to is:13947 4 1/iec:947 4 1, din rail mounting type including making connections, testing etc. as required. suitable for following capacity capacitor bank. 232 up to 6 kvar 233 7 to 10 kvar 234 p&f 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c/ d tripping characteristic) isi marked is 8828(1996)]/ conforming to iec 60898 in existing board/sheets including making connections, testing etc. as required. 235 triple pole mcb 236 6 a to 32 a rating 237 p&f on load change over switch, front handle operated, four pole 415 v conforming to is:13947 p iii including connections , testing etc. as required in the following rating: 238 open execution type 239 200 amp 240 sitc of quick make and quick break4 polecurrent limiting mccb having following current rating, short circuitbreaking capacityat 440/415 v, 50 hz; o/l & s/c settings and conforming to is 60947 2 / iec 60947 2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for uvr , shunt trip ,earth fault trip, push( test) to trip , including making connections with lugs & spreaders,etc. as required. 241 with thermal magnetic release 242 up to 160 amp , 25 ka, adjustable o/l & fixed s/c setting, ics = 100 % icu 243 plate earthing as per is:3043 withcopper earth plate of size 600mm x 600mm x 3.0mm by embodying3 to 4 mtr. below the ground level with 25mm dia. g.i. b class watering pipe including all accessories like nut, bolts, reducer, nipple ,wire meshed funnel, and c.c.finished chamber covered with hinged type with locking arrangement c.i. cover,c.i. frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. 244 s & laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 245 8 swg copper wire 246 providing & fixing of heavy duty capacitor start 900/1400 rpm single phase isi marked exhaust fan is:2312 marked in existing opening making connections, testing etc. as required 247 300 mm sweep (900/1400 rpm) 248 p & f double ball bearing capacitor start, aluminium body & blade ceilingfanwith down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. 249 1400 mm sweep 250 p & f of ip 20 led tube light 20 watt with external batten made from crca sheet steel suitable to replace t 8/t 12 tube light, integral driver, 2000 luman + 5% tolerarrce system luman efficiacy of 100 lm/ watt minimum expected life time of 25000 burning hours, cct 5700 k ansi, cri 80, driver efficiency >85%, life expectancy of driver rnin 30000 hrs. pf 0,95 at full load/ 230 volt ac. 251 p & laying xlpe insulated is:7098/ii/85 of group1 and approved make h.t.cable for working voltage 11 k.v.earthed direct in ground including excavation of 30cmx100cm size trench, 25cmlayer of river sand, iind class bricks covering, refilling earth, compaction of earth, making necessary connection testing etc.as required of size. 252 3 core 185.0 sq.mm ...

Rajasthan Tourism Development Corporation Limited - Rajasthan

33038325 furbishment work at paryatan bhawan jaipur furbishment work at paryatan bhawan jaipur carriage of building rubbish stone metal etc to a distance upto 10 km including safely stacking of material all as per instructions and directions. 2 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering all work up to plinth level.m15 grade nominal mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 20mm nominal size) 3 providing and laying in position specified grade ofcement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcementfor beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix 4 centering & shuttering with plywood or steel sheets includingstrutting, propping bracing both ways with steel props and removalof formwork for upto floor five level for :suspended floors, roofs, landings, staircases, balconies, girders,cantilevers, bands, coping bed plates, anchor blocks, sills,chhajjas, lintel, beam, plinth beam etc. 5 providingandfabricatingreinforcement forr.c.c.workincludingstraightening, cutting, bending, placing in position and binding including cost of binding wire) all complete up to floor five level. thermo mechanically treated bars (conforming of relevent is code 6 brick work with f.p.s.bricks of class designation 75 in superstructure above plinth level up to floor v level in all shapes and sizes in : cement mortar 1 : 6 (1 cement : 6 coarse sand) 7 half brick masonry in superstructure , above plinth level upto floor v level using bricks of designation 75cement mortar 1 : 4 (1 cement : 4 coarse sand) 8 plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. 9 providing & fixing door, window, chowkhats and other frames, including antitermite treatment, m.s. flat, hold fasts of size 250 x 40 x 3mm fixed with m.s. bolt 5mm dia 50mm long duly embedded in cement concrete m 15 grade : ghana teak wood grade i. 10 providing and fixing external grade board solid core single leaf flush door shutters isi 2202 67 marked usingphenol formal dehyderesin in glue both sides with approve steel fittings complete as per annexure a 35 mm thick. decorative teak veneer both side 11 extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) over item no. 8.13. 12 extra for providing other type of fittings as mention in annexure a ( as approved by ei) : brass fittings 13 providing and fixing is : 3564 marked aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete. 14 providing and fixing nigeria / ghana /ivory coast, teak wood grade i mouldings and beadings in doors and windows size : 15 25x12 mm 16 25x20 mm 17 providing and fixing bright finished mortice lock of approved make godrej or equivalent with pair of cp handles for doors with necessary screws etc complete (best make of approved quality) as per direction of engineer in charge. 18 extra for providing brass handle instead of cp handle 19 providing and fixing granite stone slab mirror polished and machine edge cut in walls, pillars, steps, shelves, sills counters, floors etc. laid on 12mm (av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.good quality south black, area above 3601 cm2slabs 20 extra for providing edge moulding to 15 18mm thick marble/ granite/kota stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer incharge. granite/kota stone work half edge moulding 21 extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete 22 extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location inmarble/granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete 23 steel work in built up tubular trusses including cutting, hoisting (height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. hot finished welded type tubes. 24 supply and installation of multi rib proofing/cladding sheet manufacture out of 0.60mm tct (total coated thickness) high tensile zinc aluminum alloy coated galvaiumeseel (as per 150gsm zinc aluminum coated 550mpa tuekd strength) confirming to is: 1397/astm a 792 sheet to have wide pens 30mm high nb at 250 centre and centre width of 1020mm shets be casted with regular modified plyster system on a continuous with line on centre for face and with a polyster coating respectively sheet shall have proportionality with siphoned plate at made at toprevent leakage sheet shall be fixed by more of sell drilling lift tapping hot dip zinc coated hox head fasterner of size 12x14x55mm long. the sheet shall be supplied in cost one length and foe a minimum up to 12mts with all scaffolding. 25 removing dry or oil bound distemper by scrapping sand papering and preparing surface smooth including necessary repairs to scratches by sandla/loi and all scaffolding (for colour changing only) 26 french sprit polishing : two or more coats on new work including a coat of wood filler. 27 providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete 28 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. 29 providing and applying superior quality wall painting with velvet touch emulsion paint of approved brand and manufacture to give an even shade with putty and preparation of surface applying with the help of paint roller the work complete in all respect as per direction of engineer in charge. new work three or more coat 30 finishing walls with acrylic smooth exterior paint of required shade including all scaffolding.new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). 31 painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work 32 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer in charge. 1: 3: 6 or richer mix. 33 dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: for thickness of tiles 10mm to 25mm. 34 dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. 35 removing aluminium/gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by engineer in charge. 36 providing and fixing sun control film, thickness of film 1 mil visible light transmittance 4 24% & solar energy transmittance 42 51% & total solar energy rejection 37 43% of approved colour and shade , complete in all respect , at all level , as directed by engineering charge. 37 providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 38 gi metal ceiling lay in perforated tegular edge global white colour tiles of size 595x595mm and 0.5 mm thick with 8 mm drop made of gi sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having nrc (noise reduction coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation and backed with a black glass fiber acoustical fleece. ...

Nathdwara Temple Board - Rajasthan

33033553 procuring furniture and other items for shri goverdhan govt. secondary school, bada bazar, nathdwara procuring furniture and other items for shri goverdhan govt. secondary school, bada bazar, nathdwara , zebra set ( class 1st and 2nd ) the wooden panels shall be made from 19mm thick plywood and pasted 0.8mm sunmica over plywood sheet.top dimension of table shall be 810mm x 250mm. table height 600mm. seat dimension shall be 810mm x 200mm with seat height 380mm.back support shall be 810mm x 180mm.structure frameprepared by 25mm x 25mm x 3mm square pipe including powder coated of 50 microns and shoe legs neoprene. , zebra set ( class 3rd to 5th ) the wooden panels shall be made from 19mm thick plywood and pasted 0.8mm sunmica over plywood sheet.top dimension of table shall be 900mm x 300mm, lower top 900mm x 300. table height 750mm. seat dimension shall be 900mm x 250mm with seat height 450mm.back support shall be 900mm x 180mm.structure frameprepared by 25mm x 50mm x 3mm square pipe including powder coated of 50 microns and shoe legs neoprene. no partical board shall be use. , study stool supply of ms stool of size 305x305x450, top surface 305x305 made by ms sheet 18 guage and structure made of ms angle 25x25x3mm. bottom surface area of structure 420x420mm and top surface area of structure 305x305 for fixing ms sheet. bottom shoe shell be neoprene for stool. finish of metal shall be powder coated. ( appx. wt. of stool 5 kg ) , study table supply ms study table of size 600x450x750, top surface 600x450 made by ms sheet 18 guage and structure made of ms angle 25x25x3mmfinish of metal shall be powder coated. ( appx. wt. of table 10 kg ) bottom shoe shell be neoprene . , green board providing and supply green board of size 2400mm x 1200 mm including green writing surface 2mm thick and back side 10mm thick hardboard with white laminate. aluminum frame surrounding on it with hooks. complete in all respecte , steel almirah with glass door supply of library book shelf of size 916mm ( w ) x486mm ( d ) x 1980mm ( h ) excluding levellers. it shall made 0.7mm thick ( + / 0.07mm ) crca for shelf, 0.8mm thick ( + / 0.08mm ) high yield strength crca for doors frame and back and 0.9mm thk ( + / 0.08mm ) crca for all other components.4mm thick plain glass ( modi / atul ) for doors shall be provided.construction shall be welded construction. crca d grade as per is:513.crcadgrade high yield strength as per is 513. construction shall be welded construction. locking and handle brass handle, two way locking mechanism with shooting bolt.height wise 4 nos of adjustable shelf shall be provided with uniformly distributed load capacity per each full shelf is 40kg maximum. m10 serew type leveler with hex plastic base. outer finish shall be epoxy polyester power coated to the thickness of 50 microns ( + / 10 ) all steel structural components are processed shall be made from virgin material and tested conforming to is 513 / is: 10748 / is: 2062 / is: 7138.the powder coated components are on regular basis tested for scratch resistance test of 4kgs and for impact resistance test for 150kgs / cm.all steel structural components shall be made from virgin material ad tested conforming to is 513 / is: 10748 / is: 2062 / is: 7138. recycled steel will not be accepted. , steel almirah almirah size shall be 916 mm ( w ) x 486 mm ( d ) x 1981 mm ( h ) . excludinglevellers. it shall made of 0.7mm thk ( + / 0.07mm ) crca for self, 0.8mm thk ( + / 0.08mm ) high yield strength crca for doors and back and 0.9mm thk ( + / 0.08mm ) crca for all other components. construction shall be welded construction. crca d grade as per is:513.crca d grade high yield strength as per is 513full height steel hinged door shall be provided. mazak handle shall be provided having three way locking mechanism with shooting bolt arrangement. height wise 4 nos of adjustable shelf shall be provided with uniformaly distributed load capacity per each full shelf is 40 kg maximum. m10 screw type leveler with hex plastic base. outer finish shall be epoxy polyester powder coated to the thckness of 50 microns ( + / 10 ) .almirah size shall be 916 mm ( w ) x 486 mm ( d ) x 1981 mm ( h ) . excludinglevellers. it shall made of 0.7mm thk ( + / 0.07mm ) crca for self, 0.8mm thk ( + / 0.08mm ) high yield strength crca for doors and back and 0.9mm thk ( + / 0.08mm ) crca for all other components. construction shall be welded construction. crca d grade as per is:513.crca d grade high yield strength as per is 513full height steel hinged door shall be provided. locking and handle brass handle, tow way locking mechanism with shooting bolt. height wise 4 nos of adjustable shelf shall be provided with uniformaly distributed load capacity per each full shelf is 40 kg maximum. m10 screw type leveler with hex plastic base. outer finish shall be epoxy polyester powder coated to the thckness of 50 microns ( + / 10 ) . all steel structural components shall be made from virgin material and tested conforming to is 513 / is 10748 / is 2062 / is 7138. recycled steel will not be accepted. , teachers table for class room the table shall have 1000 ( w ) x 600 ( d ) x 750 ( h ) . the worksurface of the table shall be 18+ / 0.5mm thick pre laminated mdf board ( is14587 ) top with 2mm pvc edge beading on all sides. the understurcture shall be c frame of 0.9+ / 0.09 mm thick powder coated 50 microns ( + / 10 ) crca ms . the tubular frame shall be of dia 25.4 + / 0.3mm x 1.2 + / 0.096mm thick ms erw round tubes. it shall have 3 drawer unit and shall be 355.5mm w x 559mm d x 433.5mm h, with shell of 0.5 + / 0.07 mm thick crca ms and drawer tray of 0.5 + / 0.07mm thick crca ms and drawe front of 0.8 + / 0.1 mm thick crca ms and the drawer friction slide shall have 1.2mm thick crca ms and lock shall be of 10 lever cam lock.handles shall be built in plastic .all fabricated parts which require welding are mig / spot welded. the screw joining wooden pan els to under structure are chipboard screws.all steel structural components shall be made from virgin and tested conforming to is 513 / is 10748 / is 2062 / is 7138. recycled steel will not be accepted. , teacher chair for class room / library supply ms chair seat size 580mm x 580mm and back support 580mm x 200mmby ms sheet 18 guage andthe tubular frame shall be of dia 25.4 + / 0.3mm x 1.2 + / 0.096mm thick ms erw round tubes.finish of metal shall be powder coated. bottom shoe shall be neoprene . , office table the table shall have 1370 ( w ) x 750 ( d ) x 750 ( h ) . the worksurface of the table shall be 18+ / 0.5mm thick pre laminated mdf board ( is14587 ) top with 2mm pvc edge beading on all sides. the understurcture shall be c frame of 0.9+ / 0.09 mm thick powder coated 50 microns ( + / 10 ) crca ms . the tubular frame shall be of dia 25.4 + / 0.3mm x 1.2 + / 0.096mm thick ms erw round tubes. it shall have 3 drawer unit and shall be 355.5mm w x 559mm d x 433.5mm h, with shell of 0.5 + / 0.07 mm thick crca ms and drawer tray of 0.5 + / 0.07mm thick crca ms and drawe front of 0.8 + / 0.1 mm thick crca ms and the drawer friction slide shall have 1.2mm thick crca ms and lock shall be of 10 lever cam lock. have other side one cupbord.handles shall be built in plastic .all fabricated parts which require welding are mig / spot welded. the screw joining wooden pan els to under structure are chipboard screws.all steel structural components shall be made from virgin and tested conforming to is 513 / is 10748 / is 2062 / is 7138. recycled steel will not be accepted. , computer chair the seat and back are made up of 1.2 cm thick hot pressedplywood, upholstered with fabric and moulded polyurethane foam with pvc lipping all around. the back foam is designed with contoured lumbar support for extra comfort. back size 39 cm ( w ) x 32 cm ( h ) . seat size43 cm ( w ) x 41 cm ( d ) . the hr polyurethane foam is moulded with density =45 + / 2 kg / m cube and hardness load 16 + / 2 kgf as per is 7888 for 25%compression. the frame is made up of 2.54 + / 0.03 cm x 0.2 6+ / 0.016 cm thk m.s.e.r.w.tub and black powder coated ( dft 40 60 microns ) .all steel structural components shall be made from virgin and tested conforming to is 513 / is 10748 / is 2062 / is 7138.recycled steel will not be accepted.seat of the chair should withstand a load of 130 kg , there should be no deformation or structural change in the understructure on application of above said load , office chair / principal office the seat and back are made up of 1.2 cm thick hot pressedplywood, upholstered with fabric and moulded polyurethane foam with pvc lipping all around. the back foam is designed with contoured lumbar support for extra comfort. back size 39 cm ( w ) x 32 cm ( h ) . seat size43 cm ( w ) x 41 cm ( d ) . the hr polyurethane foam is moulded with density =45 + / 2 kg / m cube and hardness load 16 + / 2 kgf as per is 7888 for 25%compression. the frame is made up of 2.54 + / 0.03 cm x 0.2 6+ / 0.016 cm thk m.s.e.r.w.including arm rest . tub and black powder coated ( dft 40 60 microns ) .all steel structural components shall be made from v irgin and tested conforming to is 513 / is 10748 / is 2062 / is 7138.recycled steel will not be accepted.seat of the chair should withstand a load of 130 kg , there should be no deformation or structural change in the understructure on application of above said load , steel office chair ( with cane ) the seat and back are made from seasoned wood, caned and finished with synthetic paint ( colour black ) .back size 38.1 cm ( w ) x 39.0 cm ( h ) .seat size 38.1 cm ( w ) x 42.4 cm ( d ) .the cane is produced from blends of high and low density polyethylene. the can high tensile strength at break = 1400 kg / cm2 ( min. ) and elongation at break = 54% maximum.the understructure assembbly is a cantilever type frame made of dia.2.54 + / 0.03cmx0.2 + / 0.016cm thick ms erw bube and powder coated. ( dft 40 60 microns ) .wood used in the manufacturing of seat and back should be free from defects, termite free and after caning should bear a load of 130 kg in fitted position.also there should be no permanent deformation or structural change in the frame structure on apply of this load.at the bottom of frame lugs should be press fitted in punched holes in the frme structure.all steel structural components shall be made from virgin material and tested conforming to is 513 / is 10748 / is 2062 / is 7138. recycled steel will not be accepted. , library / staff room table the product should be in complete knock down condition as much as possible / feasible enabling ease in transportation and assemblies with premises.top size : 2300 x 1100 x 750 ( h ) .the workstop will be made of 25mm thick mdf board ( is 14587 ) with post forming laminate and balancing laminate.postforming on two longer side and two short side pvc lipping2.0 mm thick.the under structure is made from 38 + / 0.3mmx 38 + / 0.3mm x 1.5 + / 0.128 mm thick ms tube with powder coatied 50 microns ( is 7138 ) at base which are welded and are fixed to top with chip board screws.under structure size 2220mm x 1020mm and 2 additional middle support of 1020 mm.the bottom ends are closed with plastic buffers.the cross members are made from 38 + / 0.3mm x 38 + / 0.3mm x 1.5 + / 0.128mm thick ms tube at base which are mig welded and are bolted to side frames.the bottom stiffeners are connected with hexagonal bolt.allfabricated part which require welding are mig / spot welded.the screw joining wooden panels to under structure are chip board screws.all steel structural components shall be made from virgin material and tested conforming to is 513 / is 10748 / is 2062 / is 7138. recycled steel will not be accepted. , stool for science lab supply of ms stool of size 305x305x600, top surface 305x305 made by ms sheet 18 guage and structure made of ms angle 25x25x3mm. bottom surface area of structure 420x420mm and top surface area of structure 305x305 for fixing ms sheet. bottom shoe shell be neoprene for stool. finish of metal shall be powder coated. ( appx. wt. of stool 6.5 kg ) , principal office table size 1525 x 915 x 750mm ht. make in 17mm wood base pre laminated board, table top 34mm boarder with glass clear ( modi / atul ) , drower telescopic channel with 0.8mm edge banding, one side three drower and other side one cupbord, both side one lock facility, best class fitting materials is used. , principal office chair the seat and back are made up of 1.2 cm thick hot pressedplywood, upholstered with fabric and moulded polyurethane foam with pvc lipping all around. the back foam is designed with contoured lumbar support for extra comfort. back size 39 cm ( w ) x 32 cm ( h ) . seat size43 cm ( w ) x 41 cm ( d ) . the hr polyurethane foam is moulded with density =45 + / 2 kg / m cube and hardness load 16 + / 2 kgf as per is 7888 for 25%compression. the frame is made up of 2.54 + / 0.03 cm x 0.2 6+ / 0.016 cm thk m.s.e.r.w.including arm rest and 5 alloy wheels .all steel structural components shall be made from v irgin and tested conforming to is 513 / is 10748 / is 2062 / is 7138.recycled steel will not be accepted. , pigeon box / staff lockers over allsize of lockers shall be840 mm ( w ) x 380 mm ( d ) x 1830 mm ( h ) . including levellers.provide 12 nos of boxes in one unit. it shall made of0.8mm thk ( + / 0.08mm ) high yield strength crca for doors and back and 0.9mm thk ( + / 0.08mm ) crca for all other components. construction shall be welded construction. crca d grade as per is:513.crca d grade high yield strength as per is 513 steel hinged door shall be provided for boxes with locking mechanism including handle.size of box 420mm ( w ) x 380mm ( d ) x 280mm ( h ) . outer finish shall be epoxy polyester powder coated to the thckness of 50 microns ( + / 10 ) . recycled steel will not be accepted. , notice board and display board size 1500 mm ( l ) x 840mm ( h ) . 10mm thick soft board placing above 6mm commercial play with velvet fabric duly ironed and pasted on expossed side and bouble floded on the edges duly stapled at 25mm interval with concealed hanging arrangement routered with commercial ply.all the sides duly finished with 50mm x 25mm moulding / beading including paint on beading. , note , the bidders should submit the bid per unit ratefor each item in which the bidder is willing to bid. the minimum ( l1 ) or most profitable bid will be evaluated separately for each item....

Rajasthan State Agricultural Marketing Board - Rajasthan

32582101 various yard works ( 2 nos. ) / kums sri ganganagar ( fandv ) package 01 / 2022 23 / sgnr / development / provision of various facilities in mandi yard kums sri ganganagar (f&v) 2 part a (civil work) 3 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer in charge : 1: 3: 6 or richer mix. 4 demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge : in cement mortar 5 removing mortar from bricks and cleaning bricks including stacking within a lead of 50 meters (stacks of cleaned bricks shall be measured) : from brick work in cement mortar. 6 disposal of earth, sand, gravel, u/s kankar, lime, flyash, morrum, manure or sludge up to 5000 mtr. beyond ist 50 mtr. lead (including loading and unloading) 7 demolishing r.c.c. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge. 8 demolishing mud phuska/ lime dhar/ kharanjain terracing and disposal of unserviceable material within 50 meters lead. 9 dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. 10 repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead : with cement mortar 1 :4 ( 1 cement : 4 coarse sand) 11 dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead : of area 3 square meter and below. 12 earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter : all kinds of soils 13 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering all work up to plinth level. 14 a) m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). 15 c) m20 grade nominal mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size). 16 brick work with common burnt clay f.p.s.(non modular) bricks of class designation 7.5 infoundation and plinth with : cement mortar 1 : 6 (1 cement : 6 coarse sand) 17 providing and laying in position specified grade ofcement concrete forall rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. : m20 grade nominal mix /design mix 18 centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. 19 providing and laying in position specified grade ofcement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcementfor beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc : m20 grade nominal mix / design mix 20 centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for : suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc. 21 brick work with common burnt clay f.p.s.(non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in : cement mortar 1 : 6 (1 cement : 6 coarse sand) 22 honeycombbrickworkhalfbrickthickwithcommon burnt clay f.p.s.(non modular) bricksofclassdesignation7.5uptofloor five level in : cement mortar 1 : 4 (1 cement : 4 coarse sand) 23 providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level : cold twisted deformed bars (is : 1786). 24 providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 25 plaster on new surface on wall in cement sand mortar 1:6 including racking of joints etc. complete fine finish : 26 a) 20mm thick 27 b) 12mm thick 28 6 mm thick cement plaster to ceiling of mix1:3 (1cement : 3 fine sand) 29 grading roof for water proofing treatment withwater proffing compound : cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 30 providing and fixing 20 mm thick precast terrazo tiles of approved make, with marble chips of size upto 6mm laid over roof with neat cement slurry mixed with pigment to match the shade of the tiles, including cutting ,grinding rubbing with machinecomplete on 20 mm thick bed of cement sand mortar 1 : 4. 31 kota stone slab flooring 25 mm thick over 20 mm (average) thickbase laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completewith base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : for area of each slab from 901 to 2000 sq.cm. 32 providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to is : 13753 & is :15622 of size 300mm x 450mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 33 painting with synthetic enamel paint of approved brand and manufacture togive an even shade : two or more coats on new work 34 providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth complete 35 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. 36 painting exterior surface ofwallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect : on new work 37 providing&layingpopcorniceofrequireddesign&patterninceilingincludingnailing&scafolldingetc.completewithfinefinishing of size : 50mm x 50mm. 38 providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10mm and down gauge) includingfinishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 39 supplying and fixing rolling shutters of approved make, made of 80 x 1.25mm. m.s. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including cost of spring hooks, providing and fixing necessary 27.5cm. long wire springs grade no. 2 and m.s. top cover 1.25mm thick for rolling shutters as per design. (clear openable area to be measured for payment). 40 providing and fixing m.s. sheet 1mm thicksingle leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of engg. incharge but excluding cost of chowkhats: including two coats of anit corrosive red oxide primer paint 41 providing & fixing fly proof wire gauze to windows, clerestorywindows & doors with m.s. flat 15x3 mm and nuts & bolts complete : galvanised m.s. wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides 42 providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : partly fixed and partly openable (fixed area not to exceed 33%) 43 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592including jointing with seal ring conforming to is : 5382 leaving 10 mm gap for thermal expansion.(i) single socketed pipes : type b, 110 mm diameter. 44 providing and fixing on wall face unplasticised pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a including jointing with seal ring conforming to is : 5382 leaving 10 mm gap for thermal expansion : single bend w/o door 87.5 deg. : 110mm dia 45 providing and fixing granite stone slab mirror polished and machine edge cut in walls, pillars, steps, shelves, sills counters, floors etc. laid on 12mm (av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete : south (red/cholate colour) : 1501 cm2 to 3600 cm2 tiles. 46 p & f wvc wash basin (ist quality is:2556 mark) of approved make with c.i. brackets duly painted 1 no. 15 mm c.p. pillar cock (is:8934 mark) & 32 mm c.p. brass waste coupling of approved make 32 mmwaste pipe complete including cutting & making good the wall : size 550 mm x 400 mm dia for counter top 47 p & f lst quality wvc urinal (is:2556 mark) with 25mm dia g.i. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete : wvc flat back half stall urinal size 580x380x350 mm/ angle back 450x375x350 type liped front. 48 providing and fixing stainless steel a isi 304 (18/8) kitchen sink & is 13983 with c.i. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : stainless steel kitchen sink without drain board 470x420mm bowl depth 178 mm 49 p & f g.i. pipeswith g.i. fittings (is:1239 mark) & m.s. clamps including cutting and making good the walls and floors : (internal work ) medium duty pipes : internal work : 50 a) exposed on walli) 15 mm dia nominal bore 51 ii) 20 mm dia nominal bore 52 p & f bib cock (is : 8931 mark), superior quality of approved make : c. p. brass long body, 15mm nominal bore weight not less than 690 gm 53 p & f stop cock(is :8931 mark),superior quality & ofapproved make: 54 a) c.p. brass 15mm nominal bore. 55 b) cp brass concealed stop cock 15mm. 56 p & f inlet connection (angle valves) superior quality, of approved make, for wash basin, gyser etc. : c.p. inlet connection 15 mm brass (is:8931 marked). 57 p & f pvc storage tank (is:12701 marked indicating the bis license no.) of approved make with cover, 25 mm dia 1 m long g.i. over flow pipe & 25 cm. long wash out pipe with plug & socket, including placing on terrace( at all floors),making connection etc. complete of approved design. details of cost for 500 litre 58 construction of open surfacedrain with 112mm thick brick masonry in cm 1:4,110mm thick base concrete 1:5:10, 37mm thick m 15 grade c.c. flooring ,12mm 1:4 cement plaster on all exposed faces of walls including top surface excavation & disposal of earth complete as per approved design/drawing : 150mm drain,225mm av. depth. 59 part b electric work 60 wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694)and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694)in recessed isi markedmms ( is:9537 p iii ) vergin material pvc conduit & its all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required.for specification of copperconductor,phenolic laminated sheets & electrical/ wiring accessoriesrefer chapter e 04, e 05 & e 07 . for additional technical parameters of products/ work, referannexure a attached with this bsr . 61 (a) short point (up to 3 mtr.) 62 (b) medium point (up to 6 mtr.) 63 (c) long point (up to 10 mtr.) 64 wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal sizefr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694)and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694)in recessed isi markedmms ( is:9537 p iii ) vergin material pvc conduit & its all accessories( j.b. , bends etc.) , round tiles, 18 swg hot dipped galvanized modular box with earth terminal, 6 a modularswitch, 3/ 5 pin 6 a modular socket, modular face plate with grid plate, screws etc,all as per pre approved by engineer in charge,making connections, testing etc. complete as required.for specification of copperconductor,phenolic laminated sheets & electrical/ wiring accessoriesrefer chapter e 04, e 05 & e 07.for additional technical parameters of products/ work, refer annexure a attached with this bsr . 65 (a) on board 66 (b) medium point (upto 6 mtr.) 67 supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from99.99% purity copper, class 5 stranding in acc. to iec 60228 forlower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810 53, better amperage rating as per vde 0298 part 4,, in existingsurface or recessed pvc/ ms conduit/casing capping includingall as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work, referannexure a attached with this bsr . 68 (a) 2 x 2.5 sqmm + 1 x 1.5 sqmm 69 (b) 2 x 4 sqmm + 1 x 2.5 sqmm 70 providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load andsite requirement) 4kv impulse withstand voltage,as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898 1 2002, iec 60947 2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per iec,minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 71 contact protection and fitted withexisting distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a ratingincluding making connections, testing etc. as required.. oem shall have submitnabl / cpri / erda accrediated lab test reportsbefore execution & all as per pre approved by engineer in charge.for additional technical parameters of products/ work, refer annexure a attached with this bsr.(a) single pole mcb6 a to 32 a rating 72 providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947 iii/conforming to iec 60947 3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage,true contact indication,red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting,minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheetincluding making connections, testing etc. as required. oem shall have submitnabl / cpri / erda accrediated lab test reportsbefore execution & all as per pre approved by engineer in charge.for additional technical parameters of products/ work, refer annexure a attached with this bsr : double pole isolator : a) 63 a rating 73 providing & fixing of ik09 recessed/surface mounting heavy duty horizontal type sheet steel of 1.6 mm thickdistribution board as per pwd specificationfor electrical works isi marked conforming to is 13032 & is 8623 / conforming to iec 61439 3. phosphatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link , connecting wire of suitable rating and din bar,masking sheet, including making internal dbterminations with copper lugs and with detachable gland plate, including making connections, testing etc. as required.oem shall have submitnabl / cpri / erda accrediated lab test reportsbefore execution & all as per pre approved by engineer in charge.for additional technical parameters of products/ work, refer annexure a attached with this bsr : ip 43 double door (single phase) : (a) 6 way (6 o/g + 2 i/c) 74 s&f following sizes (dia.) of isi marked mms ( is:9537 p iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as requiredinrecess includingcutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work, referannexure a attached with this bsr : mms (is : 9537 p iii) pvc conduit : 25 mm. 75 providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un armoured / armouredaluminiumcable of 1.1 kv grade as per pwd specification for electrical worksin existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench with filling of excavated earth in trench, on existing cable trays or on surface etc.including making necessary connection, testing etc. as required of size andas per points (a), (b), (c), mentioned below: 76 (a) material : h4 gradealuminium conductor of purity >99.6 %& as peris:1554 p i / is :7098 p i 77 (b) conductor shall have electrolytic aluminium confirming to is 8130, is 3975 1999for armouring of cables in armoured cable items , is 5831 for sheath, is 10810 (part 0 to 64 ) for testing procedures . 78 (c)oem must have iso 9001 & 14001 certifications for quality assuarance & its own in house nabl lab setup for all testing facilities forcables . appropriate type test certificate / oem test report shall be submitted .all above as per pre approved by engineer in charge.for additional technical parameters of products/ work, refer annexure a attached with this bsr : i) un armoured : a) 10 sqmm 2.0 core 79 providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coatedhousing with in built driver, power consumption of18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum50000 burning hours with , 70% of intial lumen maintaned till life ends, cct 3000°k / 4000°k/ 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be ofbis standard andtrade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 80 oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . foe additional technical parameters of product/ work, refer annexure a attacheded with this bsr.a) 4 led tube shape fixture 18/20 w (polycarbonate base) 81 supplying and fixing of power plug point with modular accessories as per pwd specification for electrical works, on hot dipped galvanized modular box of 18 swg with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost ofisi marked modular 16 amp. switch (is :3854) and 3/5 pin 16 amp. socket outlet (is:1293) [ as per detailed in respective item in bsr] , making connection , testing , etc. as required.all as per pre approved by engineer in charge.for additional technical parameters of products/ work, refer annexure a attached with this bsr . 82 supply installation testing & commissioning of iso certified manufacturer mademonoblock motor pump set isi marked (is:9079 2002) with tefc motor, motor should be ie2 class as per iec 60034 2 1: 2007, iec 60034 30: 2008,& is12615:2011. with stainless steel impellor, stainless steel shaft, mechanical seal, single/three phase ( 240 440 v ) permanent split capacitor type (psc), fitted with thermal overload protection, . including cost of hardware etc on existing platform complete. pump shall have following hp rating, phase, head, minimum discharge respectively complete in all respect. appropriate type test certificate / oem test report shall be submitted. all as per pre approved by engineer in charge.for additional technical parameters of products/ work, refer annexure a attached with this bsr : 0.5 hp, 1 ø, (3 18)mtr, (100 26) lpm 83 providing & fixing ofof m.s. j hook of standard design made out of 16 mm dia. m.s. round bar and fixed withcement concrete mortar with required support as required. 84 providing & fixing of modular type step fan regulator duly isi marked (is :11037) as per pwd specification for electrical works,made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith ip 20 rating , minimum width of 1 module switch toggle( push part ) should not less then 20mm,includingall as per pre approved by engineer in charge,making connections, testing etc. as required.all as per pre approved by engineer in charge.for additional technical parameters of products/ work, refer annexure a attached with this bsr : 5 step fan regulator 100 watt 2 module 85 providing & fixing of following modular accessories as per pwd specification for electrical works,made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith ip 20 rating , minimum width of 1 module switch toggle( push part ) should not less then 20mm,includingall as per pre approved by engineer in charge,making connections, testing etc. as required.all as per pre approved by engineer in charge.for additional technical parameters of products/ work, refer annexure a attached with this bsr : blanking plate. 86 widening & upgradation of gate no. 01 & 02 with check post at kums sri ganganagar (f&v) 87 part a (civil work) 88 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer in charge : 1: 3: 6 or richer mix. 89 demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge : in cement mortar 90 removing mortar from bricks and cleaning bricks including stacking within a lead of 50 meters (stacks of cleaned bricks shall be measured) : from brick work in cement mortar. 91 disposal of earth, sand, gravel, u/s kankar, lime, flyash, morrum, manure or sludge up to 5000 mtr. beyond ist 50 mtr. lead (including loading and unloading) 92 demolishing r.c.c. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge. 93 demolishing mud phuska/ lime dhar/ kharanjain terracing and disposal of unserviceable material within 50 meters lead. 94 dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. 95 repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead : with cement mortar 1 :4 ( 1 cement : 4 coarse sand) 96 dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead : of area 3 square meter and below. 97 earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter : all kinds of soils 98 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering all work up to plinth level. 99 a) m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). 100 c) m20 grade nominal mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size). 101 brick work with common burnt clay f.p.s.(non modular) bricks of class designation 7.5 infoundation and plinth with : cement mortar 1 : 6 (1 cement : 6 coarse sand) 102 providing and laying in position specified grade ofcement concrete forall rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. : m20 grade nominal mix /design mix 103 centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. 104 providing and laying in position specified grade ofcement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcementfor beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc : m20 grade nominal mix / design mix 105 providing and laying in position specified grade ofcement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcementfor walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. : m20 grade nominal mix / design mix 106 centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for : suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc. 107 brick work with common burnt clay f.p.s.(non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in : cement mortar 1 : 6 (1 cement : 6 coarse sand) 108 honeycombbrickworkhalfbrickthickwithcommon burnt clay f.p.s.(non modular) bricksofclassdesignation7.5uptofloor five level in : cement mortar 1 : 4 (1 cement : 4 coarse sand) 109 providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level : cold twisted deformed bars (is : 1786). 110 providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 111 plaster on new surface on wall in cement sand mortar 1:6 including racking of joints etc. complete fine finish : 112 a) 20mm thick 113 b) 12mm thick 114 6 mm thick cement plaster to ceiling of mix1:3 (1cement : 3 fine sand) 115 grading roof for water proofing treatment withwater proffing compound : cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 116 providing and fixing 20 mm thick precast terrazo tiles of approved make, with marble chips of size upto 6mm laid over roof with neat cement slurry mixed with pigment to match the shade of the tiles, including cutting ,grinding rubbing with machinecomplete on 20 mm thick bed of cement sand mortar 1 : 4. 117 kota stone slab flooring 25 mm thick over 20 mm (average) thickbase laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completewith base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : for area of each slab from 901 to 2000 sq.cm. 118 providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to is : 13753 & is :15622 of size 300mm x 450mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 119 direction and place identification signs with size more than 0.9 sqm size board. (providing anderecting direction and place identification retro reflectorised sign asper irc: 67 made of ncasulated lens type reflective sheeting vide clause801.3fixed over aluminium sheeting ,2mm thick with area exceding 0.9 sqm supported on a mild steel angle iron post 75mm x75mm x6mm ,2 nos . firmly fixed to the ground by means of properly designed foundation with m 15 grade cement concrete45cm x 45 cm x 60 cm , 120 painting with synthetic enamel paint of approved brand and manufacture togive an even shade : two or more coats on new work 121 providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth complete 122 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. 123 painting exterior surface ofwallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect : on new work 124 providing&layingpopcorniceofrequireddesign&patterninceilingincludingnailing&scafolldingetc.completewithfinefinishing of size : 50mm x 50mm. 125 providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10mm and down gauge) includingfinishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 126 providing and fixingaluminum workfor doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate z sections and other sections of approved make conforming to is :733 and is :1285,fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required pvc/neoprene felt etc. aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle aluminium snap beading for glazing /paneling , c.p. brass/ stainless steel screws al. tower bolt & al. handle & al. aldrop etc.,all complete as per architectural drawings and thedirections of engineer in – charge .(glazing and paneling to be paid for separately). 127 a) for fixed portion : anodised aluminum (anodised transparent 81 dyed to required shade according to is : 1868. (minimum anodic coating of grade ac 15, anodizing to be got done from approved anodizer) 128 b) for shutters builtup standard tubular sections of openable doors , windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately) : anodised aluminum (anodised transparent 81 dyed to required shade according to is : 1868. (minimum anodic coating of grade ac 15, anodizing to be got done from approved anodizer) 129 providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with pvs / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge.(cost of aluminium snap beading shall be paid in basicitem.) : with float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm) 130 providing and fixing double action hydraulic floor spring of approved brand and manufacture is : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece m.s. : with stainless steel cover plate 131 providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 132 providing and fixing of double leaf steel shutterfor cupboard, the frame is made of pressed steelisi section 80x25 mmx1.25 mm thickwith 1.00 mm ms sheet to spot welded including holdfasts of 15x3mm, ms oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc completeincluding applying priming coat of approved steel primer of red oxide zinc chromate andspray painting in approved shade with deco paint of approved quality complete as per direction of engineer in charge 133 providing and fixing of reinforced ferro cement drain covers designed for a & aa class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted m.s. plate, rim and m.s. lifting hooks, admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc. : for class aa loading : span 300 to 450mm standard size 600x800mm 134 providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, y and h aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge : anodised aluminum (anodised transparent 81 dyed to required shade according to is : 1868. (minimum anodic coating of grade ac 15, anodizing to be got done from approved anodizer). 135 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592including jointing with seal ring conforming to is : 5382 leaving 10 mm gap for thermal expansion.(i) single socketed pipes : type b, 110 mm diameter. 136 providing and fixing on wall face unplasticised pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a including jointing with seal ring conforming to is : 5382 leaving 10 mm gap for thermal expansion : single bend w/o door 87.5 deg. : 110mm dia 137 providing and fixing granite stone slab mirror polished and machine edge cut in walls, pillars, steps, shelves, sills counters, floors etc. laid on 12mm (av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete : south (red/cholate colour) : 1501 cm2 to 3600 cm2 tiles. 138 providing and fixing clamps of required size & shape in rcc/ cc backing with cement mortar 1:2 ( 1 cement :2 coarse sand) including drilling necessary hole in stones and embedding the cramp in the hole : stainless steel cramps. 139 p & f wvc wash basin (ist quality is:2556 mark) of approved make with c.i. brackets duly painted 1 no. 15 mm c.p. pillar cock (is:8934 mark) & 32 mm c.p. brass waste coupling of approved make 32 mmwaste pipe complete including cutting & making good the wall : size 450mm x 300mm : size 550 mm x 400 mm dia for counter top 140 p & f lst quality wvc urinal (is:2556 mark) with 25mm dia g.i. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete : wvc flat back half stall urinal size 580x380x350 mm/ angle back 450x375x350 type liped front. 141 p & f g.i. pipeswith g.i. fittings (is:1239 mark) & m.s. clamps including cutting and making good the walls and floors : (internal work ) medium duty pipes : internal work : 142 a) exposed on walli) 15 mm dia nominal bore 143 ii) 20 mm dia nominal bore 144 p & f bib cock (is : 8931 mark), superior quality of approved make : c. p. brass long body, 15mm nominal bore weight not less than 690 gm. 145 p & f stop cock(is :8931 mark),superior quality & ofapproved make: 146 a) c.p. brass 15mm nominal bore. 147 b) cp brass concealed stop cock 15mm. 148 p & f inlet connection (angle valves) superior quality, of approved make, for wash basin, gyser etc. : c.p. inlet connection 15 mm brass (is:8931 marked). 149 p & f pvc storage tank (is:12701 marked indicating the bis license no.) of approved make with cover, 25 mm dia 1 m long g.i. over flow pipe & 25 cm. long wash out pipe with plug & socket, including placing on terrace( at all floors),making connection etc. complete of approved design. details of cost for 500 litre 150 construction of open surfacedrain with 112mm thick brick masonry in cm 1:4,110mm thick base concrete 1:5:10, 37mm thick m 15 grade c.c. flooring ,12mm 1:4 cement plaster on all exposed faces of walls including top surface excavation & disposal of earth complete as per approved design/drawing : 150mm drain,225mm av. depth. 151 part b electric work 152 wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694)and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694)in recessed isi markedmms ( is:9537 p iii ) vergin material pvc conduit & its all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required.for specification of copperconductor,phenolic laminated sheets & electrical/ wiring accessoriesrefer chapter e 04, e 05 & e 07 . for additional technical parameters of products/ work, referannexure a attached with this bsr . 153 (a) short point (up to 3 mtr.) 154 (b) medium point (up to 6 mtr.) 155 (c) long point (up to 10 mtr.) 156 wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal sizefr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694)and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694)in recessed isi markedmms ( is:9537 p iii ) vergin material pvc conduit & its all accessories( j.b. , bends etc.) , round tiles, 18 swg hot dipped galvanized modular box with earth terminal, 6 a modularswitch, 3/ 5 pin 6 a modular socket, modular face plate with grid plate, screws etc,all as per pre approved by engineer in charge,making connections, testing etc. complete as required.for specification of copperconductor,phenolic laminated sheets & electrical/ wiring accessoriesrefer chapter e 04, e 05 & e 07.for additional technical parameters of products/ work, refer annexure a attached with this bsr . 157 (a) on board 158 (b) medium point (upto 6 mtr.) 159 supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from99.99% purity copper, class 5 stranding in acc. to iec 60228 forlower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810 53, better amperage rating as per vde 0298 part 4,, in existingsurface or recessed pvc/ ms conduit/casing capping includingall as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work, referannexure a attached with this bsr . 160 (a) 2 x 2.5 sqmm + 1 x 1.5 sqmm 161 (b) 2 x 4 sqmm + 1 x 2.5 sqmm 162 providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load andsite requirement) 4kv impulse withstand voltage,as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898 1 2002, iec 60947 2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per iec,minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted withexisting 163 distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a ratingincluding making connections, testing etc. as required.. oem shall have submitnabl / cpri / erda accrediated lab test reportsbefore execution & all as per pre approved by engineer in charge.for additional technical parameters of products/ work, refer annexure a attached with this bsr.(a) single pole mcb6 a to 32 a rating 164 providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947 iii/conforming to iec 60947 3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage,true contact indication,red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting,minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheetincluding making connections, testing etc. as required. oem shall have submitnabl / cpri / erda accrediated lab test reportsbefore execution & all as per pre approved by engineer in charge.for additional technical parameters of products/ work, refer annexure a attached with this bsr : double pole isolator : a) 63 a rating 165 providing & fixing of ik09 recessed/surface mounting heavy duty horizontal type sheet steel of 1.6 mm thickdistribution board as per pwd specificationfor electrical works isi marked conforming to is 13032 & is 8623 / conforming to iec 61439 3. phosphatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link , connecting wire of suitable rating and din bar,masking sheet, including making internal dbterminations with copper lugs and with detachable gland plate, including making connections, testing etc. as required.oem shall have submitnabl / cpri / erda accrediated lab test reportsbefore execution & all as per pre approved by engineer in charge.for additional technical parameters of products/ work, refer annexure a attached with this bsr : ip 43 double door (single phase) : (a) 6 way (6 o/g + 2 i/c) 166 s&f following sizes (dia.) of isi marked mms ( is:9537 p iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as requiredinrecess includingcutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work, referannexure a attached with this bsr : mms (is : 9537 p iii) pvc conduit : 25 mm 167 providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un armoured / armouredaluminiumcable of 1.1 kv grade as per pwd specification for electrical worksin existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench with filling of excavated earth in trench, on existing cable trays or on surface etc.including making necessary connection, testing etc. as required of size andas per points (a), (b), (c), mentioned below: 168 (a) material : h4 gradealuminium conductor of purity >99.6 %& as peris:1554 p i / is :7098 p i 169 (b) conductor shall have electrolytic aluminium confirming to is 8130, is 3975 1999for armouring of cables in armoured cable items , is 5831 for sheath, is 10810 (part 0 to 64 ) for testing procedures . 170 (c)oem must have iso 9001 & 14001 certifications for quality assuarance & its own in house nabl lab setup for all testing facilities forcables . appropriate type test certificate / oem test report shall be submitted .all above as per pre approved by engineer in charge.for additional technical parameters of products/ work, refer annexure a attached with this bsr : i) un armoured : a) 10 sqmm 2.0 core 171 providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coatedhousing with in built driver, power consumption of18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum50000 burning hours with , 70% of intial lumen maintaned till life ends, cct 3000°k / 4000°k/ 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be ofbis standard andtrade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 172 oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . foe additional technical parameters of product/ work, refer annexure a attacheded with this bsr.a) 4 led tube shape fixture 18/20 w (polycarbonate base) 173 supplying and fixing of power plug point with modular accessories as per pwd specification for electrical works, on hot dipped galvanized modular box of 18 swg with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost ofisi marked modular 16 amp. switch (is :3854) and 3/5 pin 16 amp. socket outlet (is:1293) [ as per detailed in respective item in bsr] , making connection , testing , etc. as required.all as per pre approved by engineer in charge.for additional technical parameters of products/ work, refer annexure a attached with this bsr . 174 providing & fixing of iso certified company made beestar rated copper wounded double ball bearing capacitor start, aluminium body & metallicblade ceilingfanas per pwd specification for electrical works, conforming to is:374 2019, & is:1885 p v 1981. with down rod up to 30 cm with secondary support safety cable ( steel wire ) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required.appropriate oem test certificate shall be submitted by contractor. all as per pre approved by engineer in charge.for additional technical parameters of products/ work, refer annexure a attached with this bsr : 1200 mm sweep bee 3 star rated (service value >=5.0 to< 5.5 ) 175 providing & fixing ofof m.s. j hook of standard design made out of 16 mm dia. m.s. round bar and fixed withcement concrete mortar with required support as required. 176 providing & fixing of modular type step fan regulator duly isi marked (is :11037) as per pwd specification for electrical works,made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith ip 20 rating , minimum width of 1 module switch toggle( push part ) should not less then 20mm,includingall as per pre approved by engineer in charge,making connections, testing etc. as required.all as per pre approved by engineer in charge.for additional technical parameters of products/ work, refer annexure a attached with this bsr : 5 step fan regulator 100 watt 2 module 177 providing & fixing of following modular accessories as per pwd specification for electrical works,made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith ip 20 rating , minimum width of 1 module switch toggle( push part ) should not less then 20mm,includingall as per pre approved by engineer in charge,making connections, testing etc. as required.all as per pre approved by engineer in charge.for additional technical parameters of products/ work, refer annexure a attached with this bsr : blanking plate. 178 providing & fixing of ip40 led recessed / surface mounted, round / sqaure non dimmable back lit smd mid power led downlight with die cast aluminum housing & heat sink for heat dissipation with uv stabilized non yellowish diffuser with internal/ external bis complience 2.5 kv surge protected isolated driver, with short & open circuit protection, having efficiency > 85% and in compliance to iec standards. system lumen efficacy of = 120 lm / watt, thd < 10 % ,p.f.=0.95, cri >80,life time of minimum50000 burning hours with , 70% of intial lumen maintaned till life ends, cct 3000°k / 4000°k/ 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be ofbis standard andtrade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing onhousing. 179 oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . foe additional technical parameters of product/ work, refer annexure a attacheded with this bsr. : recessed mounting : led downlight 18/20w 180 providing & fixing of ik07 ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum lm6/ adc12 material with heat dissipation fins on housing with uv stabilized pc/toughened glass cover (uv stablzation report submitted for uv cover ) and secondary lens on each led & should be smd type . the system level luminaire efficacy >=120 lm/ wtwith high power leds is to be usedand potted driver must be potted & has a unique bis r number withinput voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety ,input frequency 50hz±3% power factor >0.95 driverefficiency >85%,thd(i) <10%humidity 10% to 90% rh working temp 5c to 45c .driver current <1000ma shown in lm79 report. the luminaireshall be bis certified and t.c. certified. life expectancyequal or more than 50000 burning hrs with minimum 70% lumen maintened ,color 181 rendering index >70 and cct 5700k +355k. surge protection shall be min = 4 kv internal and min 10 kv external. driver should be phase to phase protection of 440 v for 4 hrs.manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced. oem must have its own in house nabl lab setup for all testing facilities forled fixtures.(lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted.all as per pre approved by engineer in charge.for additional technical parameters of products/ work, refer annexure a attached with this bsr : led street light fixture 60 watt ...

North Western Railway - Rajasthan

32427734 supply of multiple cantilever cross arm ri 3121 confirming to rdso drg. no. eti / ohe /p/ 3121 rev. a or latest.multiple cantilever cross arm ri 3121 confirming to rdso drg. no. eti / ohe /p/ 3121 rev. a or latest.,multiple cantilever cross arm ri 3121 confirming to rdso drg. no. eti / ohe /p/ 3121 rev. a or latest....

Urban Improvement Trust - Rajasthan

32265199 various civil works and maintenance works in sub division i of division ii b ( arc ) civil worksclearing and grubbing road land including uprooting rank vegetation, grass, brush, shrubs, saplings and trees of girth upto 300mm, removal of stumps, disposal of unserviceable material and stacking of serviceable material upto 1000m from road boundary. (morth specification : clause 201).by manual means : in area of light jungle 2 clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. 3 silt clearance of drains, channels and canals with lift 1.5 mtr. and lead up to 50 mtr. 4 earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils 5 add extra over item no. 1.8 and 1.9 (sechedule item no 1) for every additional lift of 1.5 m or part thereof : 6 above 1.50 to 3.00m 7 m 35,60mm thick to be used in light traffic (light traffic is defined as a daily traffic up to 150 commercial vehicles exceeding 30 kn laden weight, or an wquivalent up to 0.5 million standerd axles (msa) for a design life of 20 years (a standerd axle is defind as a single axle load of 81.6 kn ) like pedestrain plazes, shopping complexes ramps, car parks, office drveways , housing colonies , office complexes , rural roads with low volume traffic ,fram houses, beach sites, tourist resorts, local authority footwys ,residential roads, etc. 8 category bdenated only two side like i,z,t shape etc. as per irc sp 63:2004 9 random rubble dry stone kharanja under floor. 10 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering all work up to plinth level. 11 m10 grade nominal mix, 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). 12 providing and laying in position specified grade ofcement concrete forall rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. m20 grade nominal mix 13 providing and laying in position specified grade ofcement concrete for rcc structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcementfor walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix 14 providing and laying in position specified grade ofcement concrete for rcc structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcementfor beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix 15 centering and shuttering with plywood or steel plate including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. 16 anti termite treatment of floor using imidacloprid 30.5% ec non repellent, odorless, low dose, environimentally safe terniticide with rapid action non corrosive stain free manufactured by bayer or equivalent company by drilling 12mm diameter holes 300mm apart injecting the emulsion as specified by the manufacturer and plugging with cement mortar 1:2 ( 1 cement : 2 coarse sand) in the whole floor area dpe 12mm dia termitube system with required number of junction boxes are to be installed. the termitube will run all along the perimeter wall both inside and outside. in the middle area the termitube to be installed at an interval of 1.00 mtr. or less both ways as required with sufficient number of junction boxes to pump the emulsion. after successful testing of termitube, pesticide emulsion of imidacloprid 30.5% ec mixed with water in the ration of 1:474 will be pumped by a motorized spray pump from the junction box in specified manner. the plinth area of the area treated will be measured for payment. 17 centering & shuttering with plywood or steel plate including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor three level for : 18 columns, pillars, posts and struts etc. 19 random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in: 20 cement mortar 1:6 ( 1 cement : 6 sand). 21 cement mortar 1:4 ( 1 cement : 4 sand). 22 cement mortar 1:3 ( 1 cement : 3 sand). 23 random rubble stone masonry with hard stone in superstructure aboveplinth level and upto three levelabove 30cm. thick walls in : 24 cement mortar 1:3 ( 1 cement : 3 sand). 25 cement mortar 1:4 ( 1 cement : 4 sand). 26 cement mortar 1:6 ( 1 cement : 6 sand). 27 pointingonstonemasonryincementsandmortar 1:3 (1 cement : 3 sand) : 28 flush / ruled/ struck or weathered pointing. 29 providing and laying damp proof course with cement concrete grade m 150 (1 : 2 : 4) mortar prepared with 1% solution of water proof compound complete and not applying 2 coats of hot bitumen complete as per specifications. 75mm thick 30 50mm thick 31 75 mm thick 32 centering & shuttering with plywood or steel plate including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor three level for : 33 suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc. 34 providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. 35 thermo mechanically treated bars (conforming of relevent is code) 36 flyash flyash brick work with flyash flyash bricks of class designation 75 in superstructure above plinth level upto floor three level in all shapes and sizes in : 37 cement mortar 1 : 4 (1 cement : 4 coarse sand) 38 cement mortar 1 : 6 (1 cement : 6 coarse sand) 39 half flyash brick masonry in foundation & plinth using flyash bricks of designation 75 40 cement mortar 1 : 4 (1 cement : 4 coarse sand) 41 plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 42 12mm thick. 43 20mm thick. 44 6 mm thick cement plaster to ceiling of mix1:3 (1cement : 3 fine sand) 45 making grooves as per design in plaster 10mm to 20mm wide. 46 providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth complete 47 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : 48 two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect. 49 painting exterior surface ofwallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect. 50 new work 51 providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 52 painting with synthetic enamel paint of approved brand and manufacture togive an even shade : 53 two or more coats on new work 54 150cm high fencing with angle iron 50x50x6mm. placed at every 3mtr. apart 30cm. in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth post to be strutted with 50x50x6mm. angle iron provided with 6 horizontal lines and two diagonals of black barbed wire between two posts fitted and fixed with g.i. staples including earth work in excavation etc. complete. 55 grading roof for water proofing treatment withwater proffing compound 56 cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 57 providing and fixing pressed steel door frames confirming to is 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike plate and shock absorbers as specified and applyinga coat of approved steel primer after pre treatment of the surface including filling with cc 1:2:4(m15 grade) complete as directed by engineer in charge : 58 profile b 59 providing and fixing external grade board solid core single leaf flush door shutters isi 2202 67 marked using phenol formal dehyderesinin glue both sides with approved steel fittings complete as per annexure a: 30 mm thick . 60 decorative teak veneer both side 61 providing and fixingaluminum workfor doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate z sections and other sections of approved make conforming to is :733 and is :1285,fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required pvc/neoprene felt etc. aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle aluminium snap beading for glazing /paneling , c.p. brass/ stainless steel screws al. tower bolt & al. handle & al. aldrop etc.,all complete as per architectural drawings and thedirections of engineer in – charge .(glazing and paneling to be paid for separately). : for fixed portion 62 polyester powder coating aluminum( minimum thickness of powder coating 50 micron) 63 providing and fixing of plastic shutter infill made from extruded multi chamber hollow p.v.c. section having cross section of 200 x 20 x 1 mm and shutter frame made from extrude p.v.c. section in the configuration of double walled c section having an overall cross section of 40 x 37 mm and door fittings such as hinges, aldrop, handles, stopper, locking bolt will be provided. 64 providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (is 1038 1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :partly fixed and partly openable [ fixed area not to exceed 33%] 65 for shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). 66 polyester powder coating aluminum( minimum thickness of powder coating 50 micron) 67 providing and fixing superior quality like hardvyn or equivalent hydraulic door closure. 68 providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to is : 13753 & is :15622 of size 300mm x 450mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 69 providing and fixing 1st quality mat finished ceremic tile size 300x300mm confirmingto is : 13755 and is : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 70 providing and fixing 15 to 20 mm thick granite stone slab mirror polished and machine edge cut in walls, pillars, steps, shelves, sills counters, floors etc. laid on 12 mm (av.) thick base of cement mortar 1 : 3 (1 cement : 3 coarse sand) jointing with white cement mortar 1 : 2 (1 white cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of : 71 good quality south black above 3601 cm2 slabs 72 extra for providing edge moulding to 15 18mm thick marble/ granite stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge. 73 granite work (full edge moulding ) 74 p & f 1st quality heavy duty vitrified glazed mat tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to is 15622 of approved make in all colour and shade, laid with 20 mm thick cm 1: 4 including grounting the joints with white cement and matching pigment etc complete. 75 size600 mm x 1200mm 76 providing & fixingbrown kota/ mandana / dholpur/ slate stone incladding / flooring structuralbase with white cement & tinex chemical& ss clamp and fasteners (of approved brand) laid and jointed with white cement slurry mixed with pigment to match the shade of the slab as per drawing attachedcomplete in all respect as per direction of engineer in charge & architect with all lead & lift. the stone measurement will be done of outer most dimension. thickness of stone 25 30mm. 77 polished blue kota stone flooring skirting, laid over 20 mm thick base of c.m. 1 : 4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete :for area of each slab from 901 to 2000 sq.cm : 78 25 mm thick slab. 79 s/f of fire bricks on edg flooring with fire bricks suitable for 1300 degree centigrade safe working temperature as per is :8 specification laid on & filling of joint by fire resistant mortar/adhesive of required thickness as per directed on a bed of 20 mm thick 1:2 cement mortar of bricks 9 x 4.5x 3 (rate approved year 2008) 80 providing and fixing of glass moisac tiles ( bisseze marke ) size 20 x 20 x 4 mm applied with aaproved adhesive as per specification and direction of engineer in charge 81 providing and fixing staincase railing 90 cm high from nosing of made offollowing specifications. 82 50 mm outer dia (2 mm thick) s.s. pipe hand rail. 83 40 mm outer dia (2 mm thick) s.s. pipe baluster @ 1.00 mtr. 84 4 nos. 20 mm fs. s pipe intermediate runners parallel to hand. 85 s.s. shoe 1.60 mm thick 75 mm outer dia. at each baluster 86 baluster to be welded with s.s. plate 50 mm dia (3 mm thick) anchored in c.c. block with suitable dash fastners 87 50 mm dia & 2 mm thick s.s. pipe for start and end vertical ornamental posts to be provided as per direction of engineer in charge 88 the stainless steel work shall be brushed steel finish with all joints/welds properly grinded to final finish. the stainless steel shall be 304 grade and shall confirm to relevant i.s. 89 providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.extra if square,rectangular hollow tubularsections are used or grill made by flats only 90 decorative plaster work with spectrum textured coating as per approved colour and shade complete as per manufactures specifications. 91 grit textured @ 2.5 to 3.0 mm thick. 92 ornamental cement plaster in cement sand mortar1 : 4 making kangooras etc. as per jaipurpractice. 93 supplying and fixing machine cutdressed 75 mm pinksand stone (bansi paharpur) dasa/ coping wth ornamental shape having moulding and pan shape engraving as per required pattern with engraving depth of 5 mm (average) in single piece of length 90 cm to be laid on cement mortar 1:4 (12 to 20mm thick) including pointing with admixture of pigment matching with the stone shade. 94 providing corrugated g.s. sheet roofing including vertical / curved surface fixed with polymer coated j or l hooks, bolts and nuts 8 mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. 95 0.63 mm thick with zinc coating not less than 275 gm/m2 96 supply & spreading ofgood earth at site complete including loading unloading & transportation etc. 97 supply of dry manure including loading unloading,transportation & stacking at site. 98 farm yard manure(organic) 99 spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately). 100 laying of lawns including ploughing levelling breaking of clods manuring & removal of stones etc.(cost of manure or extra good earth to be paid seperately) maintenance of lawns for 30 daysor more till the grass forms a thick lawns free from weeds & fit fo 101 in rows 7.5 cms. apart in either direction 102 construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8 10 tonne to meet requirement of table 300 2 including cost of compensation for earth taken from private land with lead upto 1 km as per morth specification : clause no. 305. 103 rough chisel dressed stone flooring over 20 mm (av.) thick base in cm 1 : 6 including pointing with cement mortar 1 : 2 (1 cement : 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15 mm : 35 mm thick red sand stone. 104 p & f european type white glazed vitreous china 1st quality double syphonic w.c (is :2556 mark) with p or s trap including cutting and making good the wall and floor 105 p & f indian type white glazed vitreous china 1st quality w.c. orissa pan (is :2556 mark) with 100 mm vitreous china p or s trap including cutting and making good the wall and floor: 106 size 580x440mm. 107 p & f low level flushing cistern of 10 ltr. capacity (is : 2556 mark) o9f approved make with colplete fitting ,c.i. brackets duly painted , brass ball cock with ball, (is :1703 mark)complete including cutting and making good the wall. 108 wvc with c.p. brass bend. 109 p & f wvc wash basin (1st quality, i.s. : 2556 mark) of approved make with c.i. brackets duly painted, 1 no. 15 mm c.p. pillar cock (is : 8934 mark) &32 mm c.p. brass waste coupling of approved make, 25 mm g.i. waste pipe complete including cutting & making good the wall.: 110 size 550 mm x 400 mm dia for counter top 111 1.0 mm thick salem stainless steel aisi 304 & is 13983 1994kitchen sink of approved make (nirali, neel – kanth, jaina, faber castell )with large waste coupling. 112 (24 x 18 x 8) (20x16x8) 113 p & f inlet connection (angle valves) superior quality, of approved make, for wash basin, gyser etc. 114 c.p. inlet connection 15mm.brass (is : 8931 marked) with 37 cm long pipe and nut. 115 p & f pvc storage tank isi marked (is : 12701) indicating thebis license no),of approved make with cover, 25mm dia 1m long g.i. over flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 116 1000 litres capacity. 117 providing and fixingsuperior quality (jaguar contiental ) cp brassfittings complete as per direction of ei 118 bib cock with long thread 15 mm nominal size 119 brass / gunmetalhalf turnwt. 1 kg.ofapprovedquality / make,25mmnominalbore. 120 p & f full way valve (is:778 mark) or wheel valve of approved make 121 gun metal 32mm nominal bore. 122 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. (concealed work including cutting chases and making good the walls etc.,) 123 20mm nominal outer dia pipes 124 32mm nominal outer dia pipes 125 p&f rigid pvc pipe (is:4985 mark) class ii/ (4 kg. /cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. 126 110 mm dia 127 160 mm dia 128 p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality / make including joining the pipe with solvent cement rubber ring and lubricant: 129 coupler (socket) 130 110mm dia 131 160 mm dia 132 plain tee 133 110mm dia 134 160mm dia 135 door tee 136 110mm dia 137 bend 45 138 110mm dia 139 vent cowel 140 110mm dia 141 door bend (left & right) 142 110mm dia 143 pipe clip 144 110mm dia 145 plain floor trap 146 110mm dia 147 p trap 148 110mm dia 149 socket plug 150 110mm dia 151 door cap 152 110mm dia 153 construction of chamber in all type of soil with 300 mm thick masonry in cm 1:6 m 10 cm thick c.c. 1:5:10 in foundation, 20mm thick insider plaster in cm 1:6, finished with floating neat cement, 50mm thick m 15 grade c.c. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. 154 do size 450 x 450mm depth upto0.5 m cement cover with frame 155 wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) ofapproved make in surface / recessed isi marked medium duty pvc conduit & its accessories, round tiles,hot dipped galvanized modular box with earth terminal, 6 a modular switch,modular plate with grid plate,screws,making connections, testing etc. as required. 156 short point (up to 3 mtr.) 157 medium point (up to 6 mtr.) 158 long point(up to 10 mtr..) 159 wiring of twin control light point with 1.5 sq.mm fr pvc insulated unsheathed flexiable copper conductor 1.1 kv grade and 1.5 sq.mm.fr pvc insulated unsheathed flexiable copper earth conductor 1.1 kv grade(is: 694) of approved make in surface/ recessd isi marked medium duty pvc conduit & its accessories, round tiles, 18 swg m.s. box with earthing terminal, 6 amp two way switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. 160 medium point (up to 6 mtr) 161 wiring of 3 pin 6 amp light plug point with 1.5 sq.mm fr pvc insulated unsheathed flexiable copper conductor 1.1 kv grade and 1.5 sq.mm.fr pvc insulated unsheathed flexiable copper conductor 1.1 kv grade(is: 694) of approved make in surface/ recessd isi marked medium duty pvc conduit & its accessories, round tiles, 18 swg m.s. box with earthing terminal, 6 amp switch & 6 amp socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. 162 on board 163 medium point (up to 6 mtr) 164 long point (up to 10 mtr) 165 s&f following sizes (dia.) of isi marked medium duty pvc conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall, covering conduit and making good the same as required. 166 25 mm 167 32 mm 168 50 mm 169 supplying and fixing of power plug point modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost ofmodular 16 amp. switch and socket outlet, making connection , testing , etc. as required. 170 p&f metal clad industrial plug top & socket unit with pin and sleeve type contact on porcelain/ bakelite base in sheet steel enclosure (without mcb) including making connections, testing etc.as required 171 single / double pole(three pin) 172 32 a 173 providing & fixing isi marked 6 amp bakelite batten/angle holder including making connection testing etc. as required. 174 supplying and drawing fr pvc insulated & unsheathed flexible copper conductor isi marked (is:694) of 1.1 kv grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required. 175 2 x 2.5 sq. mm. + 1x1.5sqmm 176 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 177 p&f 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c/ d tripping characteristic) isi marked is 8828(1996)]/ conforming to iec 60898 in existing board/sheets including making connections, testing etc. as required. 178 single pole mcb 179 6 a to 32 a rating 180 four pole mcb 181 40 a 63 a rating 182 four pole mcb 183 6 a to 32 a rating 184 p&f recessed/ surface mounting heavy duty horizontal type sheet steel distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to is13032 & is8623 including making internal dbterminations with copper lugs , testing etc. as required. 185 double door (single phase) 186 12 way 187 double door (three phase) 188 8 way 189 p/laying p.v.c./ xlpe insulated & p.v.c. sheathed cable of 1.1 kv grade with aluminium conductor of is:1554 p i / is :7098 p i of group 1 of approved makein ground as per is:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand,iind class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 190 25.0 sq.mm 191 4 core 192 50.0 sq.mm 193 120.0 sq,mm 194 3.5 core 195 150.0 sq,mm 196 supplying and making one end termination with heavy duty single compression brass gland sibg type, heavy duty aluminium lugs duly crimped with crimping tool, pvc tape etc for following size of armoured pvc insulated & pvc sheathed/ xlpe aluminium conductor cable of 1100 volt grade as required of size. 197 3.5 x 120.0 sq.mm 198 4 x 25.0 sq.mm 199 p/laying p.v.c./ xlpe insulated & p.v.c. sheathed cable of 1.1 kv grade with copper conductor of is:1554 p i / is :7098 p i of group 1 of approved makein ground as per is:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand,iind class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 200 10.0 sq.mm 201 4 core 202 supplying and making one end termination with heavy duty single compression brass gland sibg type, heavy duty copper lugs duly crimped with crimping tool, pvc tape etc for following size of armoured pvc insulated & pvc sheathed/ xlpe aluminium conductor cable of 1100 volt grade as required of size. 203 4 x 10.0 sq.mm 204 sitc of wall/ free standing floor mounted dust and vermin proof compartmentalisedcubical panel made out of crca sheet , required hardware,duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shadethe panel having pu/ neoprene rubber gasket of not less than 3mm thickness , separate detachable gland plate m.s. base channel ,hinged door with locking arrangement for equipment/switchgear. thickness of sheet shallnot be less than 1.6 mm up to 600 mm length / widthof any compartment and be of 2.0 mm above 600 mm. load bearing structure shall beof 2.0 mmthick sheet supported by base m.s. channel if required . side walls and cable alley compartments having bolted type doors with / withoutdetachable extension type structure. (only outer area on all sides shall be measured & panel to be fabricated from cpri approved fabricator) 205 supplying and fixing of aluminium / copper bus barby means of smc / dmc type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable pvc sleeves. 206 electrolytic grade aluminium bus bar 207 sf of (0 500) v range volt meter on existing panel , making connection by pvc insulated copper conductor with pvc sleeves / channel etc. as required. 208 analog type ( 96mm x 96mm ) 209 sf of ct operated direct reading typeampere meter on existing panel , making connection by pvc insulated copper conductor with pvc sleeves / channel etc. as required. 210 analog type ( 96mm x 96mm ) 211 below 500 a 212 sf ofcurrent transformer, with all necessary support in existing panel including connection etc. as required . 213 up to 150/5 ratio, 10 va, class 1 accuracy 214 sf of selector switch of 10 a for voltmeter (4 position ) including making connection etc.as required . 215 sf of ct linked selector switch of 10 aforampere meter (4 position ) including making connection etc.as required . 216 sf of110/220 v, led (22.5 mm dia ) indicatinglamp with integral circuit, terminal block, including connection etc. as required. 217 red/yellow/green colour 218 supplying and drawing fr pvc insulated & unsheathed flexiable copper conductor isi marked (is:694) of 1.1 kv grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 219 1 x 1.5 sq.mm 220 1 x 2.5 sq.mm 221 1 x 4.0 sq.mm 222 1 x 6.0 sq.mm 223 sitc of self healing mpp/mp type shunt capacitor (banks) conforming to is:13340 41 / iec :831 1&2 in existing panel or parallel with load terminals , the capacitor shall be fitted with discharge resistors, pressure sensitive disconnector ( psd ) and shall have dissipation factor less than 0.0025 at 50 hz and total wattage loss less than 0.5 watt per kvar . including making connections with suitable capacity conductors/cables testing etc. as required. 224 heavy duty three phase 440 v , 50 hz capacitor (bank) 225 sitc of microprocessor based three phase sensingpower factor correction relay having following sensing capacitysecondary current , self analysing auto c/k setting according to targeted power factor setting, the relay shall havedigit display unit for display of real power factor, targeted power factor, lag/lead capacitor switching status, alarm output for under current, over current, insufficient compensation, indication of switching on units, auto/manual status, and shall have over load protection, no volt release , having multi parameter like kw, kva, kvar,metering facility as required. 226 6 to 8 stage 227 sensitivity upto 50 milli amp 228 p & f ofcam operated rotary switchs on existing panel with 2 way and off postion 229 one pole 230 16 amp 231 p & f of440 volt 3 pole capacitor(ac 6 b ) duty contactor with 3 no. early make and post break auxiliary contacts in series with quick discharge damping resistors/ reactors to limit the inrush current, conforming to is:13947 4 1/iec:947 4 1, din rail mounting type including making connections, testing etc. as required. suitable for following capacity capacitor bank. 232 up to 6 kvar 233 7 to 10 kvar 234 p&f 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c/ d tripping characteristic) isi marked is 8828(1996)]/ conforming to iec 60898 in existing board/sheets including making connections, testing etc. as required. 235 triple pole mcb 236 6 a to 32 a rating 237 p&f on load change over switch, front handle operated, four pole 415 v conforming to is:13947 p iii including connections , testing etc. as required in the following rating: 238 open execution type 239 200 amp 240 sitc of quick make and quick break4 polecurrent limiting mccb having following current rating, short circuitbreaking capacityat 440/415 v, 50 hz; o/l & s/c settings and conforming to is 60947 2 / iec 60947 2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for uvr , shunt trip ,earth fault trip, push( test) to trip , including making connections with lugs & spreaders,etc. as required. 241 with thermal magnetic release 242 up to 160 amp , 25 ka, adjustable o/l & fixed s/c setting, ics = 100 % icu 243 plate earthing as per is:3043 withcopper earth plate of size 600mm x 600mm x 3.0mm by embodying3 to 4 mtr. below the ground level with 25mm dia. g.i. b class watering pipe including all accessories like nut, bolts, reducer, nipple ,wire meshed funnel, and c.c.finished chamber covered with hinged type with locking arrangement c.i. cover,c.i. frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. 244 s & laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 245 8 swg copper wire 246 providing & fixing of heavy duty capacitor start 900/1400 rpm single phase isi marked exhaust fan is:2312 marked in existing opening making connections, testing etc. as required 247 300 mm sweep (900/1400 rpm) 248 p & f double ball bearing capacitor start, aluminium body & blade ceilingfanwith down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. 249 1400 mm sweep 250 p & f of ip 20 led tube light 20 watt with external batten made from crca sheet steel suitable to replace t 8/t 12 tube light, integral driver, 2000 luman + 5% tolerarrce system luman efficiacy of 100 lm/ watt minimum expected life time of 25000 burning hours, cct 5700 k ansi, cri 80, driver efficiency >85%, life expectancy of driver rnin 30000 hrs. pf 0,95 at full load/ 230 volt ac. 251 p & laying xlpe insulated is:7098/ii/85 of group1 and approved make h.t.cable for working voltage 11 k.v.earthed direct in ground including excavation of 30cmx100cm size trench, 25cmlayer of river sand, iind class bricks covering, refilling earth, compaction of earth, making necessary connection testing etc.as required of size. 252 3 core 185.0 sq.mm ...

Rajasthan State Mines And Minerals Limited - Rajasthan

32247918 vertical cantilever slurry pumps for supply installation commissioning of vertical cantilever slurry pumps at ibp jhamarkotra mines , supply, installation & commissioning of vertical cantilever slurry pumps at ibp, jhamarkotra mines , supply, installation & commissioning of vertical cantilever slurry pumps with motor at ibp, jhamarkotra mines . details of application, technical specifications, moc, constructional feature & scope of work as per annexure i...

West Central Railway - Rajasthan

32197692 supply of ktt division replacement of over aged contact wire, cantilever assembly and shifting of ohe on new feeder mast on main line in adee / trd / bte section...

West Central Railway - Rajasthan

32197596 supply of ktt division replacement of over aged copper contact wire ( 107 sq.mm ) , cantilever assembly and shifting of ohe on new feeder mast in dee / trd / kota section...

North Western Railway - Rajasthan

32144865 supply of cantilever tool boxcantilever tool box,cantilever tool box (5 compartment ) of taparia product no ctb 1805 having dimension (h x w x l = 205 mm x 200 mm x 450 mm ) make taparia, ctb1805, or similar...

West Central Railway - Rajasthan

32081075 supply of kota division replacement of over aged contact wire, cantilever assembly and shifting of ohe on new feeder mast on main line in adee/trd/sgz section.kota division replacement of over aged contact wire, cantilever assembly and shifting of ohe on new feeder mast on main line in adee/trd/sgz section.,...

Military Engineer Services - Rajasthan

31963069 repair / maintenance of dg set and other connected items , repair / maint ofexternal electric works, steet lightsand lt ug cables at west camp, south camp and dbs& motigarh, pugal , rd 498 ascon nodes andrepair / maint of summer appliances , deep freezer, water cooler & acat age mffr under ge ( n ) bikaner taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified.note : work will be carried out upto 4th storey of bldgs also as per pirection of engr in charge including necessary formwok and scaffolding required as per site conditions & no extra payment shall be made on this account. 2 rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement ( up to 4th storey with necessary scaffolding ) complete all as specified and as directed by engineer in charge. 3 m&l rendering cement plaster, 15 mm thick on fair faces of brick / concrete surfacesof wall in cement mortar 1:6 finished even and smooth w / o using extra cement complete all as specified. 4 rendering 10 mm thick on fair faces of brick or concrete surfaceceilings, in cement mortar 1:3 , rendering is to be finished even and smooth without using extra cementcomplete all as specified and as directed by engineer in charge. 5 preparation of new plastered or unplastered surfaces of ceilings to achieve smooth and even surface and applying three coats of white washingcomplete all as specified and as directed by engineer in charge. 6 preparation of new plastered or unplastered surfaces of walls to achieve smooth and even surface and applying three coats of white washingcomplete all as specified and as directed by engineer in charge. 7 material ad labour for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified. 8 preparationof newplastered / concrete surfaces of walls to achieve smooth and even surfaceandapplying two coats of cement based paint over and includingone coat of primer ( up to 4th storey with necessary / scaffolding ) complete all asspecified andasdirected by engr in charge. 9 supply and fixing in repair brass face for cp / brass bib tap, angle / stop cock, pillar cock, wall mixer, whb mixer, etcfor 15 mm bore pipecomplete all as specified and as directed by engineer in charge. 10 supply and fixing in repair, pvc knob or flushing handle for flushing cistern of capacity 10.0 litres , complete all as specified and as directed by engineer in charge. ( sample as approved & kept in ges sample room ) 11 supply and fixing in repair, pvc float valve suitable for flushing cistern of capacity 10.0 litrescomplete all as specified and as directed by engineer in charge. ( sample as approved & kept in ges sample room ) . 12 supply and fixing in repair, pvc syphonic kit for flushing cistern of capacity 10.0 litres, complete all as specified and as directed by engineer in charge. ( sample as approved & kept in ges sample room ) 13 supply and fixing in repair, pvc bend suitable for flushing cistern of capacity 10.0 litres, complete all as specified and as directed by engineer in charge. ( sample as approved & kept in ges sample room ) . 14 supply and fixing in repair, pvc syphon washer suitable for flushing cistern of capacity 10.0 litrescomplete all as specified and as directed by engineer in charge. ( sample as approved & kept in ges sample room ) 15 repairs to steel window, ventilators of any size to make it functional ( including slot pin, hinge, hook and eye of standard quality where required ) , resecuring of windows wire gauge and railings / grills by using welding equipments, complete all as directed. 16 repair / easing ofwooden door any type, glazed or panelled, by trimming the side of door shutter where rubbing with chowkhat, unscrew the hinges screws and lift the door and fix with screws, tightening of wire mesh etc all as per engr in charge. 17 material and labour for ( a ) repairing aluminium shutters ( door / window ) including refixing, tighteningand making good with usingrubber / beads and others small fixtures / fittings if required and making serviceable all as specified and directed by engr in charge. 18 ( b ) aluminium door locks ( sample approved by engr in charge ) 19 taking down shutters of any description n.exc 1.00 sqmeach and removing from the site all as specified & directed. 20 taking down shutters of any description exc 1.00 sqm and n.exc. 2.00 sqm each and removing from the site all as specified & directed. 21 taking down chowkats or frames with shutter ( without taking off shutter from the frame ) n.exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from siteall as specified. 22 taking down chowkats or frames with shutter ( without taking off shutter from the frame ) exc 1.5 sqm&n.exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick workand removing from site all as specified. 23 s&f pressed steel framesof size 125mm x 60mm made outof size 1.25mm thick ms sheet for doorssingle rebated including mild steel hinges medium weight 100 mm long and 25mm x 3mm flat iron in holdfast, tie bar including necessary fixinglugs, hold fast, lock strike plate and fixing arrangement etc complete as specified and making good in cement mortar 1:3 or cement concrete 1:2:4 type b 1 including pcc 1:3:6 as in back fill to chowkats all as specified. 24 s&f pressed steel framesof size 105mm x 60mm made outof size 1.25mm thick ms sheet for doorsdouble rebated including mild steel hinges medium weight 100 mm long and 25mm x 3mm flat iron in holdfast, tie bar including necessary fixinglugs, hold fast, lock strike plate and fixing arrangement etc complete as specified and making good in cement mortar 1:3 or cement concrete 1:2:4 type b 1 including pcc 1:3:6 as in back fill to chowkats all as specified. 25 supply and fixing factory made, plain framed, panelled shutter ( two panel ) 35mm thick, 2nd class hardwood with lock rail and panel of 9 mm b.w.p commercial ply. the size of rail and stiles as per as per is:1003 ( part i ) , kiln seasoned and chemically pressure treated complete all as directed by engr in charge. 26 supply and fixing 35mm thick2nd class hard wood glazed, gauzed and skelton shutters open rebated and prepare to receive glass, gauge etc but divided into squares with plain chamfered or rounded mitredand rebatedsash bars, stiles and rails as specified in ssr part i sec 8 clause 8.24 ( a ) complete all as specified 27 s&f flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.note : sampel approved by engr in charge or ge. 28 s&f solid pvc door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to disturbed surface of walls, complete all asspecified and as directed by engr in charge. 29 s&f factory made solid panel pvc door shutter 30 mm thick ( style ) consisting of frame made out of m.s. tubes for top & bottom rails. m.s. frame shall be covered with heat moulded plain colour pvc ‘c’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour pvc sheet to be fitted in the m.s. frame welded / sealed to the stiles & rails with suitable pvc sheet beading, and joined together with solvent cement, suppplyingand fixing in the frame at site as per specification & drawing complete all asspecified and as directed by engr in charge. 30 s&f factory made solid pvc moulded door shutter 28 to 30 mm thick ( stiles ) with particle board core with 2, 4 , or 6 raised panel design with 2 mm thick mouldedprelam pvc sheet on the front face & 2 mmprelam pvc sheet on back face, to be fitted in the mild steel frame welded / sealed to the stiles and rails with suitable pvc sheet beading, and joined together with solvent cement, supplying and fixing in the framme at site as per specification and drawing, complete all asspecified and as directed by engr in charge. 31 taking down of old / unserviceable kitchen cabinet / cupboard including all fixture and fitting, complete all as specified and directed.note: for measurement superficial area in elevation shall be measured. 32 s&f factory made 18mm ( +0.7mm ) thick celuka pvc ply of density 600kg / cbm manufacured by an iso 900 2008 certified company. one side prelam and other side plain18mm thick celuka pvc ply for kitchen cabinet shutter and also manufactuers test report and test certificate is mandatory with each and every supply of the material complete as per manufacturers specifications and drawing and as directed. 33 s&f factory made 18mm ( +0.7mm ) thick celuka pvc ply of density 600kg / cbm manufacured by an iso 900 2008 certified company. plain 18mm thick celuka pvc ply for shelf / partitions / drawer and also manufacturers test report and test certificate is mandatory with each and every supply of the material complete as permanufacturers specifications and drawing and as directed. 34 s&f factory made 5mm thick pvc of density 600kg / cbm manufacured by an iso 900 2008 certified company. plain 5mm thick pvc sheet paneling for back side ( wall side ) and also manufacurers test report and test certificate is mandotary with each and every supply of the material complete as per manufacturers specifications and drawing and as directed. 35 s&f 100mm size stainless steel handle complete all as specified and as directed. 36 s&f ball rolling sliding channels of size 450mm length fixed in cupboards with screws as in drawers 37 s&fauto hingesof size 150mm length fixed in cupboards with screws for holding stainless steel baskets as in drawers 38 s&f self adhesive tape of 18 / 19mm width , hot pressed & pasted on sides & bottom of edges of cupboards shutters 39 s&f steel fasteners of size 75mm long drilled and fixed to walls 40 s&f 50mm dia and 75mm long steel supports fixed with bolt at bottom of cupboards box all as specified 41 pressed steel cup board frameof ms sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including pcc 1:2:4 as in filling to back of chowkats includingbutt hinges 100 mm long. piano hinges measured separately. 42 prelaminated mdf board 19 mm thick as in shutters / shelves ( exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame worknincluding lipping ( 15 mm thick three sides and 20 mm thick lipping hinge side ) around the shutter complete all asspecified and as directed by engr in charge. 43 s&f in repair continuous ( piano ) hinges, width of flaps ( when open ) 30 mmheavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed, complete all as specified. ( isi marked ) 44 s&f butt hinges of mild steel cold rolled medium weight of size 100mm as specified. 45 supply and fixingfor stainless steel medium weight butt hinges, 100mm , complete all as specified and as directed 46 s&f aluminium anodised, barrel tower boltssize 150 mm of extruded section and fixed complete all as specified. ( isi marked ) 47 s&f aluminium handles, fabricated type, anodised size 100mm, anodised section and fixed complete all as specified. ( isi marked ) 48 s&f aluminium alloy, anodised, sliding door bolt size 250 mmwith hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified. 49 s & f hasp & staple safety type aluminium anodised with mild steel hinges spin including bolt to hinges plate fixed with screws of 75 mm in length. 50 s&f aluminium hanging floor door stopper, twin rubber stopper, size 100mm , anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour and shade, with necessary screws etc. complete. 51 m&l for 50 mm magnetic catches with brass body and striking plate including letting in as fixed complete all as specified and directed. 52 s&f 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified. ( isi marked ) 53 s&f in repair aluminium bottom door seal with brushes, length 1.2 mtr, fix with screw, suitable for wooden door complete all as specified. 54 supply and fixing in repair mild steelhelical ordinaryrat tail rod patternsprings300mm including roller and roller plate complete including fixing to pressed steel frames necessary welding work all as specified and as directed. 55 s&f in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 rm length, with stainless steel brackets near to ends with stainless steel finialsfor 25mm dia drapery rod at both ends. the drapery rod shall be projecting 150 mm outer side from the clear opening of doors / windows. ( including necessary fittings ) 56 s&f powder coated aluminium door shutter including frame of hollow section 101mm x 44.00mm xthickness not less than 1.53 mm including aluminium anodized powder coated of hollow section glazed shutter of stiles size 85mm x 44.45mm xthickness not less than 1.56mm having grooves for aluminium beading and top rail of hollow section 83.5mm x 44.45mmxthickness not less than 1.50mm, lock rail of hollow section 83.5mm x 44.45mm xthickness not less than 1.50mm and bottom rail of hollow section 114.3mm x 44.45mmx thickness not less than 1.50mm , one derived handle 300mm long, 100mm long butt hinges or aluminium floor type hydraullic door closer, aluminium mortice lock 65mm 4 levers of godrej make and glazing with select quality tinted glass 5mm thick or panelling with acp sheet and cleat rubber packing aluminium beading including aluminium hardware fitting complete all as specified and as directed by engr in charge and approved by ge. 57 m&l aluminum power coated, sliding windows three track with mosquito proofing with style 44.4x44.5x2mm thick including 4 mm thick coloured / tinted / frosted glass panes including all necessary fittings and fixturescomplete. 58 m&l for anodised aluminium grills, 6mm dia size 100x100mmfixed to aluminium windowsand thickness of powder coating not less than 50 micron, complete all as specified. 59 taking down wall panelling including any type of aluminium door, windows and partition in any position complete all as specified and as directed by engr in charge. 60 s&f in repair aluminium extruded section body, door closer hydraulically regulated, designation no. 1, universal type, suitable for door shutters of 700mm in width and of weightnot more than 35kg and fixed. 61 supply and fixing in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty. 62 s&f in repair brass mortice lock with brass handles and fittings , 4 leververtical type, size 100 mm including complete accessories complete all as specified. make: links locks / godrej / harrison 63 supply and fixing5 mm thicksheet glass ordinary quality coloured / tintedand glazed in squares, n.exceeding 0.5 sqm in each pane. 64 supply and fixing5mm thick ( minimum ) glass sheet selected quality coloured / tinted / frosted and glazed in squares, n.exceeding 0.5 sqm in each pane. 65 supply and fixing 4mm thick aluminium composite panel ( coloured sheet ) and in additional other accessories for fitting complete all as specified by engr in charge. 66 material & labourfactory made steel windows double shutter box type, outer frame made out of erw tube p section ( 60x45x25mm ) and shutters of erw tube p section ( 50x35x20mm ) operable shutters side hung includding pistol hinges with two nos of ms tower bolts 150mm size on each shutter steel handle and stopper of z section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitabel fittings / openning for cooler / ac where required .steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per drg no cepz / td 324 / 07 1 / 3 to 3 / 3 all as specified and directed by engr in charge.note: the quoted rate against the above item shall also include ( i ) 04 nos ms steel lugs of 20x5mm ms flat 20cm long over all welded to frames ( ii ) pcc block for embedding lugs. 67 ditto all as per item no 66 but in ventilators any size. 68 s&f framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to fe.290.gde e 165 69 hacking out old broken glass ( any thickness, size quality or description ) from any types of wooden / steel / alum ( up to 4th storey ) frames or stone concrete or brick surrounds glazed with putty or fixed with beads. 70 s&f4 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 sq each pane in any type of frame of iron / steel / wood / aluminium as required at site complete all as specified ( uptofourth storey with necessary scaffolding ) , all as specified. 71 s&f 4 mm thick figured glass, pin head type and glazing with oil putty or any type of beads in square n.exc. 0.5 sq each pane in any type of frame of iron / steel / wood / aluminium as required at site complete all as specified ( uptofourth storey with necessary scaffolding ) , all as specified. 72 securing glass of any description in existing wooden and iron frames glazed with putty / beads including removing loose or decayed putty / beads, painting / oiling one coat on rebates, grooves, reputtying and painting / oiling puttied surface to match existing work ( new length of frame reputtied shall be measured. 73 supply and fixing stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple 74 supply and fixing galvanised mildsteelwire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specifiedfixed with stainless steel wire staples. 75 supply and fixingin repair galvanised mildsteelwire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specifiedfixed with stainless steel wire staples. 76 s&f in repair central hole basin mixer without popup waste system with 450mm long braided hoses also available all as per directed and specified.make : jaquar, cat no cqt 23167b or equivalent in cera / hindware 77 supply and fixing in repairwall mixer non telephonic shower arrangement with connecting legs and wall flanges, cast copper alloy, chromium plated, complete all as specified make :jaquar, cat no cqt 23219or equivalent in cera / hindware. 78 s&f in repairwall mixer 3 in 1 system with provision for both hand shower & overhead shower complete with 115mm long bend pipe on upper side, connecting legs & flanges ( without hand & overhead shower ) complete all as specified. make: jaquar, cat no: cqt 23281upr or equivalent in cera / hindware. 79 s&f in repair hand shower 120mmdia round shape multi flow with cascade effect ( abs body chrome plated with gray face plate ) with rubit cleaning systemcomplete all as specified. make : jaquar, cat no hsh1731 or equivalent in cera / hindware. 80 s&f in repairsink mixer with swinging spout ( wall mounted model ) with connecting legs & wall flanges complete all as specified. make: jaquar, cat no cqt 23309 or equivalent in cera / hindware. 81 s&f in repair sink cock with swinging casted spout ( wall mounted model ) with wall flange complete all as specified make: jaquar, cat no cqt 23347 or equivalent in cera / hindware 82 s&f in repair bib cock with wall flange cast copper alloy, chromium plated fancy type , complete all as specified. make : jaquar, cat no: sqt 23047 or equivalent in cera / hindware. 83 s&f in repair 2 way cp bib cock with wall flange, cast copper alloy, chromium plated fancy type, sutable for 15 mm gi pipe, complete all as specified. make : jaquar, catno: cqt 23041 or equivalent in cera / hindware. 84 s&fin repair angle cock with wall flange , cast copper alloy, chromium plated fancy type screwedfor 15 mm iron pipe, complete all as specified. make: jaquar, cat no cqt 23059 or equivalent in cera / hindware 85 s&fin repairexposed part kit of concealed stop cock with fitting sleeve, operating lever & adjustable wall flange ( compatible with ald 069 ) complete all as specified. make: jaquar, cat no: cqt 23069k or equivalent in kohler / artize. 86 s&f in repair 15mm bore cp bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified complete all as specified. make: jainko, essco, parko, prayag 87 s&fin repair 15mm bore angle valve with wall flange , cast copper alloy, chromium plated fancy type screwedfor 15 mm iron pipe, complete all as specified. make: jainko, essco, parko, prayag 88 s&fin repair 15mm borestop valves, cast copper alloy, fancy type, chromium plated with long shankandcup ( concealed type ) screweddown, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed, complete all as specified. make: jainko, essco, parko, prayag 89 s&f in repair 15mm bore cp pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified. make: jainko, essco, parko, prayag 90 supply and fixing in repair health faucet ( abs body ) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and abs wall hook including making connections and fixed in position complete in all respect as specified.make: jainko, essco, parko, prayag 91 s&f in repair tubular towel rail, 20mm dia, d type, 60cm long between flangescomplete all as specified. make: jainko, essco, parko, prayag 92 s&f in repair chromium plated, towel ring, complete all as specified. make: jainko, essco, parko, prayag 93 s&f in repair chromium plated towel rack 600mm long without lower hangers, stainless steel complete all as specified. make : jaquar cat no akp 35781pfs or equivalent in cera / hindware. 94 s&f in repairstainless steel shop dishholder complete all as specified. make: jainko, essco, parko, prayag 95 s&f in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed., complete all as specified. make : jainko, essco, parko, prayag 96 s&f in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long . complete all as specified. make : jainko, essco, parko, prayag 97 s&f in repair corner glass shelf ( with bracket ) as per directed by engr in charge. make: jainko, essco, parko, prayag 98 s&f in repair waste coupling of chromium plated brass32 mm dia with long screwed shank and fly nuts complete as suitable for wash hand basinall as specified . make : jainko, essco, parko, prayag 99 s&f in repair waste coupling of chromium plated brass40 mm dia with long screwed shank and fly nuts complete as suitable for wash hand basinall as specified . make : jainko, essco, parko, prayag. 100 s&f in repair pvc connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore.make : jainko, essco, parko, prayag 101 s&f in repair pvc connection 15 mm x 600 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore. make : jainko, essco, parko, prayag 102 s&f in repairbrasschromiumplatedshower rosewith or without swivel joints, 125mm size, including fixing to steel pipe or unionmake : jainko, essco, parko, prayag 103 s&f in repair single piece wc with uf soft close seat cover, hinges, fixing accessories set and accessories set, cistern fittings, size: 660 x 365 x 765mm, s trap 300mm complete all as specified. make : cera, cat no s1013105 or equivalent in hindware / jaquar. 104 s&f in repair under counter basin white colour with fixing accessories set, size: 560 x 470x190, oval shape, including cpwaste coupling and pvc waste pipe complete all as specified. make : cera, cat no s2030104 or equivalent in jaquar / hindware. 105 s&f in repairvitreous china, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass.complete all as specified and as directed by engineer in charge.. make : cera, cat no s2040119 or equivalent in jaquar / hindware. 106 s&f in repair full pedestal for whbcomplete all as specified. make : cera, cat no s2090113 or equivalent in jaquar / hindware. 107 s&f in repair pvc valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, pvc 32 mm l bend of capacity 10.0 litres and making good to dismantled / damaged floor / surfaces, fixing in repair, complete all as specified and as directed by engineer in charge. make: cera, cat no b1010109 ( congo ) or equivalent in jaquar / hindware. 108 supply and fixing in repairpvc seat cover for ewc pan ( white ) of standardd quality including hinges bolt etc all as directed by engr in carge.make: cera cat no b1510121 or equivalent in jaquar / hindware. 109 supply and fixing in repair vitreous china ware pedestal type water closet white, with p or s trap including self closing seat cover, closed pattern with flat bottom, complete all as directed. make: cera, cat part no s1053101 or equivalent in jaquar / hindware. 110 s&f in repair wc orissa pattern white with integral foot rest580x 440 mm including l bend, &pcc bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified. ( rate of including in taking out and removal of old wc seat unhygienic condition ) make: cera, cat part no s3010102 ( calina ) or equivalent in jaquar / hindware. 111 supply and fixingin repair pvc waste pipe 32mm bore of required length complete. make: prayag cat no 329 or equivalent in polytuf / jindal. 112 supply and fixing in repair pvc waste pipe 40mm bore of required lengthcomplete for sink / whb . make: prayag cat no 330or equivalent in polytuf / jindal. 113 dismantling water tanks and removing to store of water storage tanks ( cap. 500 ltr to 1000 ltr ) complete all as specified and directed by engineer in charge. 114 dismantling water tanks and removing to store of water storage tanks ( cap. 250 ltr to 500 ltr ) complete all as specified and directed by engineer in charge. 115 supply and fixingrotational moulded polyethylene water storage tanks of1000 litres capacity, ( cylindrical vertical with closed top ) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in ssr part i including ptmt ball valves high pressure with epoxy coated aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified. make : vectus, sintex, sheetal. 116 supply and fixingrotational moulded polyethylene water storage tanks of 500 litres capacity, ( cylindrical vertical with closed top ) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in ssr part i including ptmt ball valves high pressure with epoxy coated aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specifiedmake : vectus, sintex, sheetal. 117 disconnecting of water tank of 500 ltr capacity setting aside ( or lowering if required ) for repairs, cleaning etc. and hoisting if required reconnecting and re fixing in position. ( cleaning repairing, etc. measured separately ) . 118 cleaning and removing all scale and dirt etc, from exc 250 & n exc 500 litres capacitytanks in any position and from mouths of circulating pipes etc, and disinfection completely by making all the arrangements and writing date of cleaning on side of tanks also containing completion from user complete all as directed. 119 cleaning and removing all scale and dirt etc, from exc 500 & n exc 1000 litres capacitytanks in any position and from mouths of circulating pipes etc, and disinfection completely by making all the arrangements and writing date of cleaning on side of tanks also containing completion from user complete all as directed. 120 supply and fixing in repair gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of 25 mm bore pipe, including making connections complete all as specified and fixed. 121 supply and fixing in repair gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of 20 mm bore pipe, including making connections complete all as specified and fixed. 122 supply and fixing in repair gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of 15 mm bore pipe, including making connections complete all as specified and fixed. 123 supply and fixing in repair ball valves high pressure of ptmt with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore pipe including making connections complete all as as specified and fixed ( minimum weight 20mm 210 gms ) . 124 supply and fixing in repair ball valves high pressure of ptmt with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 25 mm bore pipe including making connections complete all as as specified and fixed ( minimum weight 25mm 455 gms ) . 125 s&f in repair pvc tank coversrequired for 500 ltr to 1000 ltr pvc water tanks complete all as specified and fixed 126 taking up or down steel tubing of 15 mm bore pipe and connections, including cleaning for re fixing or removal to store, complete all as specified and as directed 127 taking up or down steel tubing of 20 mm bore pipe and connections, including cleaning for re fixing or removal to store, complete all as specified and as directed 128 taking up or down steel tubing of 25 mm bore pipe and connections, including cleaning for re fixing or removal to store, complete all as specified and as directed 129 supply and fixing tubes medium grade galvanised, 15 mm bore, isi marked with all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by engineer in charge 130 supply and fixing tubes medium grade galvanised, 20 mm bore, isi marked with all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by engineer in charge. 131 supply and fixing tubes medium grade galvanised, 25 mm bore, isi marked with all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by engineer in charge. 132 supply and fixing fittings for steel tubing galvanised, 15 mm bore, such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc complete all as specified and as directed 133 supply and fixing fittings for steel tubing galvanised, 20 mm bore, such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc complete all as specified and as directed 134 supply and fixing 20 mm nominal outer diachlorinated polyvinyl chloride ( cpvc ) pipes sdr 11, having thermal stability for hot & cold water supply, including all plain cpvc sdr 11 fittings & brass threaded fittings on walls / ceiling or laying in floors, including fixing the pipe with clamps. this includes jointing of pipes & fittings with one step cpvc solvent cement, complete as per direction of engineer in charge. make: supreme, prince, prayag. 135 supply and fixing 25 mm nominal outer diachlorinated polyvinyl chloride ( cpvc ) pipes sdr 11, having thermal stability for hot & cold water supply, including all plain cpvc sdr 11 fittings & brass threaded fittings on walls / ceiling or laying in floors, including fixing the pipe with clamps. this includes jointing of pipes & fittings with one step cpvc solvent cement, complete as per direction of engineer in charge. make: supreme, prince, prayag. 136 m&l cutting chases, pinning in , making good to facings where required and pointing in cement mortar1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting n.exc 10cm girth in brick walls. 137 s&f in repair stainless steel lock grating plain / hole size 100 mmdiaincluding embeding in tiles with white cement. make: jainko, essco, parko. 138 dismantling pvc / cement / ci pipes 50 to 110 mm diaincluding allfittings like bend, branch pieces, connectors, heel rest bend etc and removing from site all as specified and directed 139 supply and fixing upvc ( swr ) type b pipes 110 mm bore single socketed in any length with rubber ringjoints, laid in trenches orin floors, complete all as specified and as directed by engineer in charge. make astral, supreme, finolex 140 supply and fixing upvc ( swr ) type b pipes 110 mm bore single socketed, in any length with rubber ringjoints fixedto walls including stack clamp of gi flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by engineer in charge.make astral, supreme, finolex 141 supply and fixing upvc ( swr ) type b pipes 75 mm bore single socketed in any length with rubber ringjoints, laid in trenches orin floors, complete all as specified and as directed by engineer in charge. make astral, supreme, finolex 142 supply and fixing upvc ( swr ) type b pipes 75 mm bore single socketed, in any length with rubber ringjoints fixedto walls including stack clamp of gi flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by engineer in charge. make astral, supreme, finolex 143 supply and fixing, upvc ( swr ) , bends for75 mm bore , complete all as specified and as directed by engineer in charge.make astral, supreme, finolex 144 supply and fixing, upvc ( swr ) , bends with access doorfor75 mm bore , complete all as specified and as directed by engineer in charge.make astral, supreme, finolex 145 supply and fixing, upvc ( swr ) , bendsfor110 mm borecomplete all as specified and as directed by engineer in charge.make astral, supreme, finolex 146 supply and fixing, upvc ( swr ) , bends with access door, for110 mm borecomplete all as specified and as directed by engineer in charge.make astral, supreme, finolex 147 supply and fixing, upvc branch piece, single ( single y ) with access door for 75 mm bore complete all as specified and directed.make: astral, supreme, finolex. 148 supply and fixing, upvc branch piece, single ( single y ) with access door for 110 mm bore complete all as specified and directed.make: astral, supreme, finolex. 149 supply and fixing, upvc ( swr ) , junction single, ( single t ) with access door equal or unequal for 75 mm bore , complete all as specified and as directed by engineer in charge.make astral, supreme, finolex 150 supply and fixing, upvc ( swr ) , junction single, ( single t ) with access door equal or unequal for 110 mm bore , complete all as specified and as directed by engineer in charge.make astral, supreme, finolex 151 s&f upvc ( swr ) , reducers 110 mm dia complete all as specified. make: astral, supreme, finolex. 152 s&f upvc ( swr ) vent cowl 75 mm dia complete all as specified.make astral, supreme, finolex 153 supply and fixing in repair upvc ( swr ) floor trap plain with gratinghaving dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type b 1 ( 1:2:4 ) complete all as specified and directed.make astral, supreme, finolex 154 s&f in repair, upvc ( swr ) gully trap 125 / 110 mm, setting and jointing with solvent cement complete all as specified.make astral, supreme, finolex 155 rendering 15mm thck in cm 1:3 or plain cement concrete as in sunken floorswithout extra cement on walls / floors and including mixing of water proofing compound ( wpc shall be measured and paid separately ) 156 m&l applying a coat of bituminous primer conforming to is 3384on prepared surface of roof / sunken slab after drying of primer apply app based polymeric membrane minimum weighing 3kg / sqm and minimum 3mm thick reinforced with polyester non woven fabric ( wt not less than 150 gms / sqm ) laid on primed surface by forced torched application and finally apply a coat of hot blown 85 / 25 graded bitumen conforming to is 702 @ 1.2kg / sqm of plaster surface. 157 m&l cement concrete type e 2, 1:5:10 ( 40 mm graded agregate ) in sunkan ( up to 4th floor ) filling and mass concrete complete all as specified and directed by emgr in charge. 158 m&l 40 mm dia g i tubing heavy grade galvanised laid over floors as a spout pipe in sunken floors all as specified. 159 demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable materialfrom the work site ouside defence premises complete all as specified. 160 m&l brick work with subclass b bricks, old size bricks, straight or curved onplan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by engineer in charge 161 m&l brick work with subclass b bricks, old size bricks, straight or curved onplan exceeding 6 metre mean radius built in cement mortar 1:6but except bricks complete all as specified and as directed by engineer in charge 162 m&l brickwork with subclass ‘b’ bricks, straight or curved on plan to any radius in half brick thick walls built in cm 1:4 complete all as specified. 163 material and labour for providing, cement concrete 1:2:4type b 1 ( using 20mm graded aggregate ) , in lintels upto1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed 164 demolition of cement concrete ( unreinforced ) ground floor to 4th floors and pavings n exc 15 cm thickness ( below or above ground level ) and removingthe rubbish from the work site out side defence premises complete all as specified. 165 dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface ( but not backing ) , removing serviceable tiles to store and rubbish off the premises. complete all as specied and directed. 166 roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushingsurface with neat cement slurry with 3.0 kg of cement per sq. metre, removing serviceable tiles to store and rubbish off the cantt area complete all as directed 167 material and labour glazed ceramic coloureddigital tiles in vertical surface300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick cm 1:4 all as specified. ( sample as approved & kept in ges sample room ) 168 material and labournon skid digitalceramicjoint lesscoloured tiles 7 to 8 mm thick ( square / rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured / white cement to match the surface over and including15 mm thick screed bed in cm 1:4. ( sample as approved & kept in ges sample room ) 169 description all as item no 168 but as in vertical surfaces dado / skirting over and including a backing coat of cm 1:4, 10 mm thick complete. 170 material and labourvitrifiedceramic light shade tiles10 mm thick ( square / rectangular ) polishedarea of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured / white cement to matchover and including15 mm thick screed bed in cm 1:4. ( sample as approved & kept in ges sample room ) 171 description all as item no 170 but as in vertical surfaces dado / skirting over and including a backing coat of cm 1:4, 10 mm thick complete. 172 material and labourvitrifiedceramic ( double charged ) edge cutjoint freecoloured or printed any shade tiles10 mm thick ( square / rectangular ) polishedarea of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured / white cement to matchover and including15 mm thick screed bed in cm 1:4. ( sample as approved & kept in ges sample room ) 173 description all as item no 172but as in vertical surfaces dado / skirting over a backing coat of cm 1:4, 10 mm thick complete. 174 material and labour for chequered cement concrete tiles 30cm x30cm x 25mm thick, with greay cement and pigment, set, jointed and pointed in neat cement slurry in floors and laid over and including 20mm thick screed bed in cm 1:4 etc complete all as specified and as directed 175 material and labour for precast factory made interlockingdesigener tiles glazed topmade in white cement and pigment base of thickness not less than 19 mm indifferent colour and pattern ( compressive strength not less than 250 kg / sqcm ) setand jointed in neat cement slurry ( colour and pattern as per sample kept in ge office as approved by ge ) including 15 mm thick screed bedin cm 1:4. completeall as specified and directed by engr in charge. 176 providing and laying 60mm thick factory made chamfered edge cement concrete paver block of m 35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size / shape, made by table vibratory method using pu mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand 177 m&l 16 to 18mm thick granite ( of any type ) work ( table rubbed and polished ) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar ( 1:4 ) including pointing in white cement ( 1:2 ) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick cm 1:4 as directed by engr in charge. 178 m&l rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified. 179 m&l for 50mm thick cement concrete 1:3:6, type c1, using 20mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:20 and surface finished even and smooth without using extra cement including making joint at 3m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth ( comprising one part hot blown bitumen 85 / 25 and two part of sand ) , complete all as specified and directed. 180 material and labour for precast cement concretelouvers and jallies, 40 mm thick ( 1:2:4 ) type b 0 ( using 12.5 mm graded aggregate ) set in cement mortar 1:6, including all mouldingsand dismantling old u / s broken jallies at site, complete all as specified. 181 m&l for plain cement concrete ( 1:3:6 ) , type c 2 ( using40 mm graded crushed stone aggregate ) nominal mix, 75 mm thick, as in sub base offloors, finished even and faircomplete all as specified and as directed by engineer in charge. 182 m&lfor 25 mm thick cement concrete 1:2:4, type b 0, ( using 12.5 mm graded crushed stone aggregate ) as in sub base / levelling course of floors, finished even and faircomplete all as specified and directed. 183 supply and fixing in repair for bevelled edge mirror of size ( 600x450mm ) , selected quality glass approved size , mounted on 6 mm thick ac building board or commercial plywood and fixed to wooden plugs with ss screws and cup washers. 184 s&f in repair, pvc cabinet mirror ofselected quality glass approved size ( 330mm x 430mm ) , fix with screw complete all as specified. make: prayag, cat no: 551 or equivalent to jaquar, cera 185 supply and fixing in repair sinks made of stainless steel 1.00 mm thick kitchen orlaboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 610mm x 460mm bowl size 560mm x 410mm x 200mm complete with cp waste coupling & pvc waste pipe complete all as specified anddirected by engineer in charge. make: jainko, model no ssj 1. & equivalent in prayag, nirali, jayana. 186 s&f sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm & bowl size 410mm x 355mm x 200mm complete with cp waste coupling & pvc waste pipe complete all as specified anddirected by engineer in charge. make: jainko model no . ssj 8. & equivalent in prayag, nirali, jayana. 187 s & f kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. the over all size ( 30x36x10 ) fixed with steel fastners or steel screw complete.make: jainko, model no.krj 4. and equivalent in prayag, nirali, jayana. 188 dismantling of bricks ( laid flat or on edge ) or brick tiles in floors, channels, kerbs, aprons, etc. ( each layer ) , laid, bedded and pointed in any mortar, complete as specified and directed. 189 complete removal of existing water proofing treatment of any description incl under layer, taking down of cement plaster / demolition of cement concrete any thickness and removal of debris off the premisesincluding grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt / dust. 190 m&l for p.c.c 1:2:4 type b 0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed. 191 m&l rendering 15mm thck in cm 1:4 on concrete surfaces of rooffinished fair & even and including mixing of water proofing compound ( wpc shall be measured and paid separately ) 192 m&lforwater proofing treatment inthe following sequences: ( a ) applying1st course of bituminous primer conforming to is 3384 @ 0.4 kg / sqm cover the surface till the surface properly impregnated and insolvent oil primer evoporate completely ( bi ) applying2nd coat of blown 85 / 25 graded bitumen confirming to is 702 @ 1.2 kg / sqm. ( c ) applying 3rd course of app ( atactic polypropylene ) modified polymeric membrane 3 mm thick weight not less than 3.6 kg / sqm with 160 grams / sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. the membrane has to be laid with lpg torch and overlap sealed and finished neat complete all as specified and as directed. 193 m&l for preparation of newly sufrace of app membrane and applying two coats of water based bituminious alumunium paint @ 200 ml per sqm etc 194 m&l 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar ( 1:3 ) mixed with 5% of crude oil by weight of cement on mud phuska 195 cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed by engineer in charge. 196 supply only water proofing compound liquid. 197 cleaning of roof surfaces of rcc roof ( any type ) tiles with brush and removing all vegetation, plants, roots, grass, leaves any type ofmaterial asked to remove at any height of bldg or any part of bldg complete all as directed. 198 m&l for repairing of concrete surfaces such asbalcony, chajjas, upward or downward facias , column, pillar, ceiling and similar items with plain cement concrete 1:2:4type b 0 or rendering 10 15mm thickas per site requirement in cm 1:3 without using extra cement finished even and fair complete all as specified and directed ( up to fourth storey bldgs and including necessory formwork and scaffolding required as per site condition also taking down or dismantling as required at site. 199 m&l for applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width / girth exceeding 10 cmincluding preparation and rubbing with sand paper to make surface even and smooth complete all as specified. 200 m&l for applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width / girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth. 201 demolition ofreinforced cement concrete of any discription ground to 4th floors and removingthe rubbish from the work site out side defence premises complete all as specified. 202 m&l for rcc m 15, nominal mix, type b 1 ( 1:2:4 ) , using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specifiedand directed. 203 m&lfor tmtmildsteel bars10mm dia and over, cutto length, bentto shape required, including cranking, bendingspirallyforhooping for column, hookingendandbinding withandincludingmildsteelwire ( annealed ) not lessthan0.9 mm dia or securing with clips, complete all as specified and directed. 204 m&l for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick ( horizontal or sloping ) for rough finished surfaces of concrete, complete all as specified and directed. 205 m&l for use and waste form work to edges of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls, floor and roof and not exc. 20cm wide and sides of rcc / pcc bands in walls, horizontal or sloping and similar workexc. 10cm but n.exc. 20cm wide for fair finished surfaces of concrete, complete all as specified & directed 206 repair to existing pvc pipe / ci pipe including making the joints water tight by using suitable material including cleaning if requiredand refixingof any dia. note :work to be carried out up to 4th storey bldg in any condition of working place / area 207 material and labour for sealing of wc / floor traps joint and joints between rain water pipe and roofby using neat white cement paste or leak proof material and making the joint leakproof in case seepage is observed from wc / floor trap and joint of rain water pipe and roof slab.note :work to be carried out up to 4th storey bldg in any condition of working place / area 208 taking down carefully aluminium conductor point wiring ( light, fan, light socket, power socket ) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed. 209 m&l for complete point wiringwith 1.5 sqmm single core multi stranded copper conductor frlsh pvc insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible frlsh pvc insulated drawn in and including concealed pvc rigid conduit medium gradeisi marked terminated into gi modular sunken boxes including white cover plate with frame as per relevant isfor mounting moudlar switches, sockets, fan regulators etc complete all as specified and as directed for the following : ( a ) one light / fan point / exhaust fan point controlled by one way switch 6 amps. 210 ( b ) one 3 pin socket outlet 6a point on same board. 211 all as per srl item no 209 above but for one 3 pin socket outlet 15 amp independent with cable of size 2.5 sqmm for point wiring and 2.5 sqmm as in continuous earth wire. 212 s & f moudlar switch piano flush button single pole one way, 6 amp, 1 moudle. complete all as specified and directed. 240 v 213 supply and fix moudlarsocket outlet 2 in 15 pin, 6 amps made of polycarbonate flush type complete all as specified and as directed. 214 supply and fix moudlar socket outlet 2 in 15 pin, 6 & 16 amps flush type made of polycarbonate complete all as specified and as di rected. 215 supply and fix moudlarswitch piano made of polycarbonateflush button single pole one way, 16 amps, 230 / 240 v complete all as specified and as directed by engineer in charge. 216 preparation of old decorated brick / concrete, plastered / un plastered surfaces of walls, pillars, cornices etc ( upto four storey bldgs ) by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, rubbing with sand paperand applying one coat of lime white wash on the walls, pillars, cornices etc. complete all as specified and directed. 217 preparation of old decorated brick / concrete, plastered / un plastered surfaces of ceilings, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots , rubbing with sand paper and applying one coat of white wash on ceiling, complete all as specified and directed. 218 preparation of old decorated brick / concrete / plastered / unplastered surfaces of walls, pillars, cornices etcby booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of oil emulsion distemper onwalls, pillars, cornices surface including making good uneven surface / holes with birla wall care putty coloured in same shade where ever required etc. complete all as specified and directed. 219 complete removal of existing treatment including washing, rubbing down with sand paper and stopping of distempered and painted surfaces including preparation of old plastered surfaces of walls andapplying two coats of distemperoil emulsion over and including one coat of primerover two coats ofbirla wall care putty 1 to 2 mm thick on plastered surfaces, preparatory to distempering. complete all as specified and as directed by engineer in charge. 220 preparation of old decorated brick / concrete / plastered / unplastered surfaces of walls, pillars, cornices etcby booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applying one coat of cement base paint on walls, pillars, cornice etc ( upto 4th storey with necessary scaffolding complete all as specified and directed. 221 preparation of old decorated brick / concrete / plastered / unplastered surfaces of walls, pillars, cornices etcby booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper and applyingtwo coats of cement base paint on walls, pillars, cornice etc ( upto 4th storey with necessary scaffolding complete all as specified and directed. 222 complete removal of existing treatment including washing, rubbing down with sand paper and stopping ofpainted surfaces including preparation of old plastered surfaces of walls, chajjas, fascia, face of columns, beams etc. andapplyingone coat of weather proof exterior emulsion ( apex ) making good uneven surface / holes with birla wall care putty coloured in same shade where ever required etc ( up to 4th storey with necessary scaffolding ) complete all as specified and directed. 223 preparation of old painted wooden surfaces having width / girth exceeding 10 cm including necessry putty filling with knife of same colour where required to achieve smooth and even surface and applying one coat of synthetic enamel paint on wood surfaces of any description ( up to 4th storey with necessary scaffolding ) complete all as specified and directed 224 preparation of old painted steel surfaces having width / girth exceeding 10 cm including necessry rubbing with sand paper or grinding by hand grinder to achieve smooth and even surface and applying one coat of synthetic enamel paint on steel surfaces of any description ( up to 4th storey with necessary scaffolding ) complete all as specified and directed...

North Western Railway - Rajasthan

31832931 supply of cantilever tool boxcantilever tool box,cantilever tool box (3&5 compartment ) of taparia product no ctb 1805 having dimension (h x w x l = 155 mm x 200 mm x 450 mm ) make taparia, jhalani,stanely, pooja international only...

Urban Improvement Trust - Rajasthan

31814282 various civil works and maintenance works in sub division i of division ii b ( arc ) civil work clearing and grubbing road land including uprooting rank vegetation, grass, brush, shrubs, saplings and trees of girth upto 300mm, removal of stumps, disposal of unserviceable material and stacking of serviceable material upto 1000m from road boundary. (morth specification : clause 201).by manual means : in area of light jungle 2 clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. 3 silt clearance of drains, channels and canals with lift 1.5 mtr. and lead up to 50 mtr. 4 earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils 5 add extra over item no. 1.8 and 1.9 (sechedule item no 1) for every additional lift of 1.5 m or part thereof : 6 above 1.50 to 3.00m 7 m 35,60mm thick to be used in light traffic (light traffic is defined as a daily traffic up to 150 commercial vehicles exceeding 30 kn laden weight, or an wquivalent up to 0.5 million standerd axles (msa) for a design life of 20 years (a standerd axle is defind as a single axle load of 81.6 kn ) like pedestrain plazes, shopping complexes ramps, car parks, office drveways , housing colonies , office complexes , rural roads with low volume traffic ,fram houses, beach sites, tourist resorts, local authority footwys ,residential roads, etc. 8 category bdenated only two side like i,z,t shape etc. as per irc sp 63:2004 9 random rubble dry stone kharanja under floor. 10 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering all work up to plinth level. 11 m10 grade nominal mix, 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). 12 providing and laying in position specified grade ofcement concrete forall rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. m20 grade nominal mix 13 providing and laying in position specified grade ofcement concrete for rcc structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcementfor walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix 14 providing and laying in position specified grade ofcement concrete for rcc structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcementfor beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix 15 centering and shuttering with plywood or steel plate including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. 16 anti termite treatment of floor using imidacloprid 30.5% ec non repellent, odorless, low dose, environimentally safe terniticide with rapid action non corrosive stain free manufactured by bayer or equivalent company by drilling 12mm diameter holes 300mm apart injecting the emulsion as specified by the manufacturer and plugging with cement mortar 1:2 ( 1 cement : 2 coarse sand) in the whole floor area dpe 12mm dia termitube system with required number of junction boxes are to be installed. the termitube will run all along the perimeter wall both inside and outside. in the middle area the termitube to be installed at an interval of 1.00 mtr. or less both ways as required with sufficient number of junction boxes to pump the emulsion. after successful testing of termitube, pesticide emulsion of imidacloprid 30.5% ec mixed with water in the ration of 1:474 will be pumped by a motorized spray pump from the junction box in specified manner. the plinth area of the area treated will be measured for payment. 17 centering & shuttering with plywood or steel plate including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor three level for : 18 columns, pillars, posts and struts etc. 19 random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in: 20 cement mortar 1:6 ( 1 cement : 6 sand). 21 cement mortar 1:4 ( 1 cement : 4 sand). 22 cement mortar 1:3 ( 1 cement : 3 sand). 23 random rubble stone masonry with hard stone in superstructure aboveplinth level and upto three levelabove 30cm. thick walls in : 24 cement mortar 1:3 ( 1 cement : 3 sand). 25 cement mortar 1:4 ( 1 cement : 4 sand). 26 cement mortar 1:6 ( 1 cement : 6 sand). 27 pointingonstonemasonryincementsandmortar 1:3 (1 cement : 3 sand) : 28 flush / ruled/ struck or weathered pointing. 29 providing and laying damp proof course with cement concrete grade m 150 (1 : 2 : 4) mortar prepared with 1% solution of water proof compound complete and not applying 2 coats of hot bitumen complete as per specifications. 75mm thick 30 50mm thick 31 75 mm thick 32 centering & shuttering with plywood or steel plate including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor three level for : 33 suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc. 34 providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. 35 thermo mechanically treated bars (conforming of relevent is code) 36 flyash flyash brick work with flyash flyash bricks of class designation 75 in superstructure above plinth level upto floor three level in all shapes and sizes in : 37 cement mortar 1 : 4 (1 cement : 4 coarse sand) 38 cement mortar 1 : 6 (1 cement : 6 coarse sand) 39 half flyash brick masonry in foundation & plinth using flyash bricks of designation 75 40 cement mortar 1 : 4 (1 cement : 4 coarse sand) 41 plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 42 12mm thick. 43 20mm thick. 44 6 mm thick cement plaster to ceiling of mix1:3 (1cement : 3 fine sand) 45 making grooves as per design in plaster 10mm to 20mm wide. 46 providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth complete 47 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : 48 two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect. 49 painting exterior surface ofwallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect. 50 new work 51 providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 52 painting with synthetic enamel paint of approved brand and manufacture togive an even shade : 53 two or more coats on new work 54 150cm high fencing with angle iron 50x50x6mm. placed at every 3mtr. apart 30cm. in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth post to be strutted with 50x50x6mm. angle iron provided with 6 horizontal lines and two diagonals of black barbed wire between two posts fitted and fixed with g.i. staples including earth work in excavation etc. complete. 55 grading roof for water proofing treatment withwater proffing compound 56 cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 57 providing and fixing pressed steel door frames confirming to is 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike plate and shock absorbers as specified and applyinga coat of approved steel primer after pre treatment of the surface including filling with cc 1:2:4(m15 grade) complete as directed by engineer in charge : 58 profile b 59 providing and fixing external grade board solid core single leaf flush door shutters isi 2202 67 marked using phenol formal dehyderesinin glue both sides with approved steel fittings complete as per annexure a: 30 mm thick . 60 decorative teak veneer both side 61 providing and fixingaluminum workfor doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate z sections and other sections of approved make conforming to is :733 and is :1285,fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required pvc/neoprene felt etc. aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle aluminium snap beading for glazing /paneling , c.p. brass/ stainless steel screws al. tower bolt & al. handle & al. aldrop etc.,all complete as per architectural drawings and thedirections of engineer in – charge .(glazing and paneling to be paid for separately). : for fixed portion 62 polyester powder coating aluminum( minimum thickness of powder coating 50 micron) 63 providing and fixing of plastic shutter infill made from extruded multi chamber hollow p.v.c. section having cross section of 200 x 20 x 1 mm and shutter frame made from extrude p.v.c. section in the configuration of double walled c section having an overall cross section of 40 x 37 mm and door fittings such as hinges, aldrop, handles, stopper, locking bolt will be provided. 64 providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (is 1038 1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :partly fixed and partly openable [ fixed area not to exceed 33%] 65 for shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). 66 polyester powder coating aluminum( minimum thickness of powder coating 50 micron) 67 providing and fixing superior quality like hardvyn or equivalent hydraulic door closure. 68 providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to is : 13753 & is :15622 of size 300mm x 450mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 69 providing and fixing 1st quality mat finished ceremic tile size 300x300mm confirmingto is : 13755 and is : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 70 providing and fixing 15 to 20 mm thick granite stone slab mirror polished and machine edge cut in walls, pillars, steps, shelves, sills counters, floors etc. laid on 12 mm (av.) thick base of cement mortar 1 : 3 (1 cement : 3 coarse sand) jointing with white cement mortar 1 : 2 (1 white cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of : 71 good quality south black above 3601 cm2 slabs 72 extra for providing edge moulding to 15 18mm thick marble/ granite stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge. 73 granite work (full edge moulding ) 74 p & f 1st quality heavy duty vitrified glazed mat tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to is 15622 of approved make in all colour and shade, laid with 20 mm thick cm 1: 4 including grounting the joints with white cement and matching pigment etc complete. 75 size600 mm x 1200mm 76 providing & fixingbrown kota/ mandana / dholpur/ slate stone incladding / flooring structuralbase with white cement & tinex chemical& ss clamp and fasteners (of approved brand) laid and jointed with white cement slurry mixed with pigment to match the shade of the slab as per drawing attachedcomplete in all respect as per direction of engineer in charge & architect with all lead & lift. the stone measurement will be done of outer most dimension. thickness of stone 25 30mm. 77 polished blue kota stone flooring skirting, laid over 20 mm thick base of c.m. 1 : 4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete :for area of each slab from 901 to 2000 sq.cm : 78 25 mm thick slab. 79 s/f of fire bricks on edg flooring with fire bricks suitable for 1300 degree centigrade safe working temperature as per is :8 specification laid on & filling of joint by fire resistant mortar/adhesive of required thickness as per directed on a bed of 20 mm thick 1:2 cement mortar of bricks 9 x 4.5x 3 (rate approved year 2008) 80 providing and fixing of glass moisac tiles ( bisseze marke ) size 20 x 20 x 4 mm applied with aaproved adhesive as per specification and direction of engineer in charge 81 providing and fixing staincase railing 90 cm high from nosing of made offollowing specifications. 82 50 mm outer dia (2 mm thick) s.s. pipe hand rail. 83 40 mm outer dia (2 mm thick) s.s. pipe baluster @ 1.00 mtr. 84 4 nos. 20 mm fs. s pipe intermediate runners parallel to hand. 85 s.s. shoe 1.60 mm thick 75 mm outer dia. at each baluster 86 baluster to be welded with s.s. plate 50 mm dia (3 mm thick) anchored in c.c. block with suitable dash fastners 87 50 mm dia & 2 mm thick s.s. pipe for start and end vertical ornamental posts to be provided as per direction of engineer in charge 88 the stainless steel work shall be brushed steel finish with all joints/welds properly grinded to final finish. the stainless steel shall be 304 grade and shall confirm to relevant i.s. 89 providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.extra if square,rectangular hollow tubularsections are used or grill made by flats only 90 decorative plaster work with spectrum textured coating as per approved colour and shade complete as per manufactures specifications. 91 grit textured @ 2.5 to 3.0 mm thick. 92 ornamental cement plaster in cement sand mortar1 : 4 making kangooras etc. as per jaipurpractice. 93 supplying and fixing machine cutdressed 75 mm pinksand stone (bansi paharpur) dasa/ coping wth ornamental shape having moulding and pan shape engraving as per required pattern with engraving depth of 5 mm (average) in single piece of length 90 cm to be laid on cement mortar 1:4 (12 to 20mm thick) including pointing with admixture of pigment matching with the stone shade. 94 providing corrugated g.s. sheet roofing including vertical / curved surface fixed with polymer coated j or l hooks, bolts and nuts 8 mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. 95 0.63 mm thick with zinc coating not less than 275 gm/m2 96 supply & spreading ofgood earth at site complete including loading unloading & transportation etc. 97 supply of dry manure including loading unloading,transportation & stacking at site. 98 farm yard manure(organic) 99 spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately). 100 laying of lawns including ploughing levelling breaking of clods manuring & removal of stones etc.(cost of manure or extra good earth to be paid seperately) maintenance of lawns for 30 daysor more till the grass forms a thick lawns free from weeds & fit fo 101 in rows 7.5 cms. apart in either direction 102 construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8 10 tonne to meet requirement of table 300 2 including cost of compensation for earth taken from private land with lead upto 1 km as per morth specification : clause no. 305. 103 rough chisel dressed stone flooring over 20 mm (av.) thick base in cm 1 : 6 including pointing with cement mortar 1 : 2 (1 cement : 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15 mm : 35 mm thick red sand stone. 104 p & f european type white glazed vitreous china 1st quality double syphonic w.c (is :2556 mark) with p or s trap including cutting and making good the wall and floor 105 p & f indian type white glazed vitreous china 1st quality w.c. orissa pan (is :2556 mark) with 100 mm vitreous china p or s trap including cutting and making good the wall and floor: 106 size 580x440mm. 107 p & f low level flushing cistern of 10 ltr. capacity (is : 2556 mark) o9f approved make with colplete fitting ,c.i. brackets duly painted , brass ball cock with ball, (is :1703 mark)complete including cutting and making good the wall. 108 wvc with c.p. brass bend. 109 p & f wvc wash basin (1st quality, i.s. : 2556 mark) of approved make with c.i. brackets duly painted, 1 no. 15 mm c.p. pillar cock (is : 8934 mark) &32 mm c.p. brass waste coupling of approved make, 25 mm g.i. waste pipe complete including cutting & making good the wall.: 110 size 550 mm x 400 mm dia for counter top 111 1.0 mm thick salem stainless steel aisi 304 & is 13983 1994kitchen sink of approved make (nirali, neel – kanth, jaina, faber castell )with large waste coupling. 112 (24 x 18 x 8) (20x16x8) 113 p & f inlet connection (angle valves) superior quality, of approved make, for wash basin, gyser etc. 114 c.p. inlet connection 15mm.brass (is : 8931 marked) with 37 cm long pipe and nut. 115 p & f pvc storage tank isi marked (is : 12701) indicating thebis license no),of approved make with cover, 25mm dia 1m long g.i. over flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 116 1000 litres capacity. 117 providing and fixingsuperior quality (jaguar contiental ) cp brassfittings complete as per direction of ei 118 bib cock with long thread 15 mm nominal size 119 brass / gunmetalhalf turnwt. 1 kg.ofapprovedquality / make,25mmnominalbore. 120 p & f full way valve (is:778 mark) or wheel valve of approved make 121 gun metal 32mm nominal bore. 122 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. (concealed work including cutting chases and making good the walls etc.,) 123 20mm nominal outer dia pipes 124 32mm nominal outer dia pipes 125 p&f rigid pvc pipe (is:4985 mark) class ii/ (4 kg. /cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. 126 110 mm dia 127 160 mm dia 128 p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality / make including joining the pipe with solvent cement rubber ring and lubricant: 129 coupler (socket) 130 110mm dia 131 160 mm dia 132 plain tee 133 110mm dia 134 160mm dia 135 door tee 136 110mm dia 137 bend 45 138 110mm dia 139 vent cowel 140 110mm dia 141 door bend (left & right) 142 110mm dia 143 pipe clip 144 110mm dia 145 plain floor trap 146 110mm dia 147 p trap 148 110mm dia 149 socket plug 150 110mm dia 151 door cap 152 110mm dia 153 construction of chamber in all type of soil with 300 mm thick masonry in cm 1:6 m 10 cm thick c.c. 1:5:10 in foundation, 20mm thick insider plaster in cm 1:6, finished with floating neat cement, 50mm thick m 15 grade c.c. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. 154 do size 450 x 450mm depth upto0.5 m cement cover with frame 155 wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) ofapproved make in surface / recessed isi marked medium duty pvc conduit & its accessories, round tiles,hot dipped galvanized modular box with earth terminal, 6 a modular switch,modular plate with grid plate,screws,making connections, testing etc. as required. 156 short point (up to 3 mtr.) 157 medium point (up to 6 mtr.) 158 long point(up to 10 mtr..) 159 wiring of twin control light point with 1.5 sq.mm fr pvc insulated unsheathed flexiable copper conductor 1.1 kv grade and 1.5 sq.mm.fr pvc insulated unsheathed flexiable copper earth conductor 1.1 kv grade(is: 694) of approved make in surface/ recessd isi marked medium duty pvc conduit & its accessories, round tiles, 18 swg m.s. box with earthing terminal, 6 amp two way switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. 160 medium point (up to 6 mtr) 161 wiring of 3 pin 6 amp light plug point with 1.5 sq.mm fr pvc insulated unsheathed flexiable copper conductor 1.1 kv grade and 1.5 sq.mm.fr pvc insulated unsheathed flexiable copper conductor 1.1 kv grade(is: 694) of approved make in surface/ recessd isi marked medium duty pvc conduit & its accessories, round tiles, 18 swg m.s. box with earthing terminal, 6 amp switch & 6 amp socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. 162 on board 163 medium point (up to 6 mtr) 164 long point (up to 10 mtr) 165 s&f following sizes (dia.) of isi marked medium duty pvc conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall, covering conduit and making good the same as required. 166 25 mm 167 32 mm 168 50 mm 169 supplying and fixing of power plug point modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost ofmodular 16 amp. switch and socket outlet, making connection , testing , etc. as required. 170 p&f metal clad industrial plug top & socket unit with pin and sleeve type contact on porcelain/ bakelite base in sheet steel enclosure (without mcb) including making connections, testing etc.as required 171 single / double pole(three pin) 172 32 a 173 providing & fixing isi marked 6 amp bakelite batten/angle holder including making connection testing etc. as required. 174 supplying and drawing fr pvc insulated & unsheathed flexible copper conductor isi marked (is:694) of 1.1 kv grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required. 175 2 x 2.5 sq. mm. + 1x1.5sqmm 176 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 177 p&f 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c/ d tripping characteristic) isi marked is 8828(1996)]/ conforming to iec 60898 in existing board/sheets including making connections, testing etc. as required. 178 single pole mcb 179 6 a to 32 a rating 180 four pole mcb 181 40 a 63 a rating 182 four pole mcb 183 6 a to 32 a rating 184 p&f recessed/ surface mounting heavy duty horizontal type sheet steel distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to is13032 & is8623 including making internal dbterminations with copper lugs , testing etc. as required. 185 double door (single phase) 186 12 way 187 double door (three phase) 188 8 way 189 p/laying p.v.c./ xlpe insulated & p.v.c. sheathed cable of 1.1 kv grade with aluminium conductor of is:1554 p i / is :7098 p i of group 1 of approved makein ground as per is:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand,iind class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 190 25.0 sq.mm 191 4 core 192 50.0 sq.mm 193 120.0 sq,mm 194 3.5 core 195 150.0 sq,mm 196 supplying and making one end termination with heavy duty single compression brass gland sibg type, heavy duty aluminium lugs duly crimped with crimping tool, pvc tape etc for following size of armoured pvc insulated & pvc sheathed/ xlpe aluminium conductor cable of 1100 volt grade as required of size. 197 3.5 x 120.0 sq.mm 198 4 x 25.0 sq.mm 199 p/laying p.v.c./ xlpe insulated & p.v.c. sheathed cable of 1.1 kv grade with copper conductor of is:1554 p i / is :7098 p i of group 1 of approved makein ground as per is:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand,iind class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 200 10.0 sq.mm 201 4 core 202 supplying and making one end termination with heavy duty single compression brass gland sibg type, heavy duty copper lugs duly crimped with crimping tool, pvc tape etc for following size of armoured pvc insulated & pvc sheathed/ xlpe aluminium conductor cable of 1100 volt grade as required of size. 203 4 x 10.0 sq.mm 204 sitc of wall/ free standing floor mounted dust and vermin proof compartmentalisedcubical panel made out of crca sheet , required hardware,duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shadethe panel having pu/ neoprene rubber gasket of not less than 3mm thickness , separate detachable gland plate m.s. base channel ,hinged door with locking arrangement for equipment/switchgear. thickness of sheet shallnot be less than 1.6 mm up to 600 mm length / widthof any compartment and be of 2.0 mm above 600 mm. load bearing structure shall beof 2.0 mmthick sheet supported by base m.s. channel if required . side walls and cable alley compartments having bolted type doors with / withoutdetachable extension type structure. (only outer area on all sides shall be measured & panel to be fabricated from cpri approved fabricator) 205 supplying and fixing of aluminium / copper bus barby means of smc / dmc type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable pvc sleeves. 206 electrolytic grade aluminium bus bar 207 sf of (0 500) v range volt meter on existing panel , making connection by pvc insulated copper conductor with pvc sleeves / channel etc. as required. 208 analog type ( 96mm x 96mm ) 209 sf of ct operated direct reading typeampere meter on existing panel , making connection by pvc insulated copper conductor with pvc sleeves / channel etc. as required. 210 analog type ( 96mm x 96mm ) 211 below 500 a 212 sf ofcurrent transformer, with all necessary support in existing panel including connection etc. as required . 213 up to 150/5 ratio, 10 va, class 1 accuracy 214 sf of selector switch of 10 a for voltmeter (4 position ) including making connection etc.as required . 215 sf of ct linked selector switch of 10 aforampere meter (4 position ) including making connection etc.as required . 216 sf of110/220 v, led (22.5 mm dia ) indicatinglamp with integral circuit, terminal block, including connection etc. as required. 217 red/yellow/green colour 218 supplying and drawing fr pvc insulated & unsheathed flexiable copper conductor isi marked (is:694) of 1.1 kv grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 219 1 x 1.5 sq.mm 220 1 x 2.5 sq.mm 221 1 x 4.0 sq.mm 222 1 x 6.0 sq.mm 223 sitc of self healing mpp/mp type shunt capacitor (banks) conforming to is:13340 41 / iec :831 1&2 in existing panel or parallel with load terminals , the capacitor shall be fitted with discharge resistors, pressure sensitive disconnector ( psd ) and shall have dissipation factor less than 0.0025 at 50 hz and total wattage loss less than 0.5 watt per kvar . including making connections with suitable capacity conductors/cables testing etc. as required. 224 heavy duty three phase 440 v , 50 hz capacitor (bank) 225 sitc of microprocessor based three phase sensingpower factor correction relay having following sensing capacitysecondary current , self analysing auto c/k setting according to targeted power factor setting, the relay shall havedigit display unit for display of real power factor, targeted power factor, lag/lead capacitor switching status, alarm output for under current, over current, insufficient compensation, indication of switching on units, auto/manual status, and shall have over load protection, no volt release , having multi parameter like kw, kva, kvar,metering facility as required. 226 6 to 8 stage 227 sensitivity upto 50 milli amp 228 p & f ofcam operated rotary switchs on existing panel with 2 way and off postion 229 one pole 230 16 amp 231 p & f of440 volt 3 pole capacitor(ac 6 b ) duty contactor with 3 no. early make and post break auxiliary contacts in series with quick discharge damping resistors/ reactors to limit the inrush current, conforming to is:13947 4 1/iec:947 4 1, din rail mounting type including making connections, testing etc. as required. suitable for following capacity capacitor bank. 232 up to 6 kvar 233 7 to 10 kvar 234 p&f 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c/ d tripping characteristic) isi marked is 8828(1996)]/ conforming to iec 60898 in existing board/sheets including making connections, testing etc. as required. 235 triple pole mcb 236 6 a to 32 a rating 237 p&f on load change over switch, front handle operated, four pole 415 v conforming to is:13947 p iii including connections , testing etc. as required in the following rating: 238 open execution type 239 200 amp 240 sitc of quick make and quick break4 polecurrent limiting mccb having following current rating, short circuitbreaking capacityat 440/415 v, 50 hz; o/l & s/c settings and conforming to is 60947 2 / iec 60947 2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for uvr , shunt trip ,earth fault trip, push( test) to trip , including making connections with lugs & spreaders,etc. as required. 241 with thermal magnetic release 242 up to 160 amp , 25 ka, adjustable o/l & fixed s/c setting, ics = 100 % icu 243 plate earthing as per is:3043 withcopper earth plate of size 600mm x 600mm x 3.0mm by embodying3 to 4 mtr. below the ground level with 25mm dia. g.i. b class watering pipe including all accessories like nut, bolts, reducer, nipple ,wire meshed funnel, and c.c.finished chamber covered with hinged type with locking arrangement c.i. cover,c.i. frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. 244 s & laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 245 8 swg copper wire 246 providing & fixing of heavy duty capacitor start 900/1400 rpm single phase isi marked exhaust fan is:2312 marked in existing opening making connections, testing etc. as required 247 300 mm sweep (900/1400 rpm) 248 p & f double ball bearing capacitor start, aluminium body & blade ceilingfanwith down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. 249 1400 mm sweep 250 p & f of ip 20 led tube light 20 watt with external batten made from crca sheet steel suitable to replace t 8/t 12 tube light, integral driver, 2000 luman + 5% tolerarrce system luman efficiacy of 100 lm/ watt minimum expected life time of 25000 burning hours, cct 5700 k ansi, cri 80, driver efficiency >85%, life expectancy of driver rnin 30000 hrs. pf 0,95 at full load/ 230 volt ac. 251 p & laying xlpe insulated is:7098/ii/85 of group1 and approved make h.t.cable for working voltage 11 k.v.earthed direct in ground including excavation of 30cmx100cm size trench, 25cmlayer of river sand, iind class bricks covering, refilling earth, compaction of earth, making necessary connection testing etc.as required of size. 252 3 core 185.0 sq.mm ...

Urban Improvement Trust - Rajasthan

31814018 various civil works and maintenance works in sub division ii of division ii b ( arc ) civil works clearing and grubbing road land including uprooting rank vegetation, grass, brush, shrubs, saplings and trees of girth upto 300mm, removal of stumps, disposal of unserviceable material and stacking of serviceable material upto 1000m from road boundary. (morth specification : clause 201).by manual means : in area of light jungle 2 clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. 3 silt clearance of drains, channels and canals with lift 1.5 mtr. and lead up to 50 mtr. 4 earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils 5 add extra over item no. 1.8 and 1.9 (sechedule item no 1) for every additional lift of 1.5 m or part thereof : 6 above 1.50 to 3.00m 7 m 35,60mm thick to be used in light traffic (light traffic is defined as a daily traffic up to 150 commercial vehicles exceeding 30 kn laden weight, or an wquivalent up to 0.5 million standerd axles (msa) for a design life of 20 years (a standerd axle is defind as a single axle load of 81.6 kn ) like pedestrain plazes, shopping complexes ramps, car parks, office drveways , housing colonies , office complexes , rural roads with low volume traffic ,fram houses, beach sites, tourist resorts, local authority footwys ,residential roads, etc. 8 category bdenated only two side like i,z,t shape etc. as per irc sp 63:2004 9 random rubble dry stone kharanja under floor. 10 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering all work up to plinth level. 11 m10 grade nominal mix, 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). 12 providing and laying in position specified grade ofcement concrete forall rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. m20 grade nominal mix 13 providing and laying in position specified grade ofcement concrete for rcc structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcementfor walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix 14 providing and laying in position specified grade ofcement concrete for rcc structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcementfor beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix 15 centering and shuttering with plywood or steel plate including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. 16 anti termite treatment of floor using imidacloprid 30.5% ec non repellent, odorless, low dose, environimentally safe terniticide with rapid action non corrosive stain free manufactured by bayer or equivalent company by drilling 12mm diameter holes 300mm apart injecting the emulsion as specified by the manufacturer and plugging with cement mortar 1:2 ( 1 cement : 2 coarse sand) in the whole floor area dpe 12mm dia termitube system with required number of junction boxes are to be installed. the termitube will run all along the perimeter wall both inside and outside. in the middle area the termitube to be installed at an interval of 1.00 mtr. or less both ways as required with sufficient number of junction boxes to pump the emulsion. after successful testing of termitube, pesticide emulsion of imidacloprid 30.5% ec mixed with water in the ration of 1:474 will be pumped by a motorized spray pump from the junction box in specified manner. the plinth area of the area treated will be measured for payment. 17 centering & shuttering with plywood or steel plate including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor three level for : 18 columns, pillars, posts and struts etc. 19 random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in: 20 cement mortar 1:6 ( 1 cement : 6 sand). 21 cement mortar 1:4 ( 1 cement : 4 sand). 22 cement mortar 1:3 ( 1 cement : 3 sand). 23 random rubble stone masonry with hard stone in superstructure aboveplinth level and upto three levelabove 30cm. thick walls in : 24 cement mortar 1:3 ( 1 cement : 3 sand). 25 cement mortar 1:4 ( 1 cement : 4 sand). 26 cement mortar 1:6 ( 1 cement : 6 sand). 27 pointingonstonemasonryincementsandmortar 1:3 (1 cement : 3 sand) : 28 flush / ruled/ struck or weathered pointing. 29 providing and laying damp proof course with cement concrete grade m 150 (1 : 2 : 4) mortar prepared with 1% solution of water proof compound complete and not applying 2 coats of hot bitumen complete as per specifications. 75mm thick 30 50mm thick 31 75 mm thick 32 centering & shuttering with plywood or steel plate including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor three level for : 33 suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc. 34 providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. 35 thermo mechanically treated bars (conforming of relevent is code) 36 flyash flyash brick work with flyash flyash bricks of class designation 75 in superstructure above plinth level upto floor three level in all shapes and sizes in : 37 cement mortar 1 : 4 (1 cement : 4 coarse sand) 38 cement mortar 1 : 6 (1 cement : 6 coarse sand) 39 half flyash brick masonry in foundation & plinth using flyash bricks of designation 75 40 cement mortar 1 : 4 (1 cement : 4 coarse sand) 41 plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 42 12mm thick. 43 20mm thick. 44 6 mm thick cement plaster to ceiling of mix1:3 (1cement : 3 fine sand) 45 making grooves as per design in plaster 10mm to 20mm wide. 46 providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth complete 47 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : 48 two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect. 49 painting exterior surface ofwallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty,etc complete in all respect. 50 new work 51 providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 52 painting with synthetic enamel paint of approved brand and manufacture togive an even shade : 53 two or more coats on new work 54 150cm high fencing with angle iron 50x50x6mm. placed at every 3mtr. apart 30cm. in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth post to be strutted with 50x50x6mm. angle iron provided with 6 horizontal lines and two diagonals of black barbed wire between two posts fitted and fixed with g.i. staples including earth work in excavation etc. complete. 55 grading roof for water proofing treatment withwater proffing compound 56 cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 57 providing and fixing pressed steel door frames confirming to is 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike plate and shock absorbers as specified and applyinga coat of approved steel primer after pre treatment of the surface including filling with cc 1:2:4(m15 grade) complete as directed by engineer in charge : 58 profile b 59 providing and fixing external grade board solid core single leaf flush door shutters isi 2202 67 marked using phenol formal dehyderesinin glue both sides with approved steel fittings complete as per annexure a: 30 mm thick . 60 decorative teak veneer both side 61 providing and fixingaluminum workfor doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate z sections and other sections of approved make conforming to is :733 and is :1285,fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required pvc/neoprene felt etc. aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle aluminium snap beading for glazing /paneling , c.p. brass/ stainless steel screws al. tower bolt & al. handle & al. aldrop etc.,all complete as per architectural drawings and thedirections of engineer in – charge .(glazing and paneling to be paid for separately). : for fixed portion 62 polyester powder coating aluminum( minimum thickness of powder coating 50 micron) 63 providing and fixing of plastic shutter infill made from extruded multi chamber hollow p.v.c. section having cross section of 200 x 20 x 1 mm and shutter frame made from extrude p.v.c. section in the configuration of double walled c section having an overall cross section of 40 x 37 mm and door fittings such as hinges, aldrop, handles, stopper, locking bolt will be provided. 64 providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (is 1038 1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :partly fixed and partly openable [ fixed area not to exceed 33%] 65 for shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). 66 polyester powder coating aluminum( minimum thickness of powder coating 50 micron) 67 providing and fixing superior quality like hardvyn or equivalent hydraulic door closure. 68 providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to is : 13753 & is :15622 of size 300mm x 450mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 69 providing and fixing 1st quality mat finished ceremic tile size 300x300mm confirmingto is : 13755 and is : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 70 providing and fixing 15 to 20 mm thick granite stone slab mirror polished and machine edge cut in walls, pillars, steps, shelves, sills counters, floors etc. laid on 12 mm (av.) thick base of cement mortar 1 : 3 (1 cement : 3 coarse sand) jointing with white cement mortar 1 : 2 (1 white cement : 2 marble dust) with pigment to match the shade of the granite slab complete including rubbing and polishing of : 71 good quality south black above 3601 cm2 slabs 72 extra for providing edge moulding to 15 18mm thick marble/ granite stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge. 73 granite work (full edge moulding ) 74 p & f 1st quality heavy duty vitrified glazed mat tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to is 15622 of approved make in all colour and shade, laid with 20 mm thick cm 1: 4 including grounting the joints with white cement and matching pigment etc complete. 75 size600 mm x 1200mm 76 providing & fixingbrown kota/ mandana / dholpur/ slate stone incladding / flooring structuralbase with white cement & tinex chemical& ss clamp and fasteners (of approved brand) laid and jointed with white cement slurry mixed with pigment to match the shade of the slab as per drawing attachedcomplete in all respect as per direction of engineer in charge & architect with all lead & lift. the stone measurement will be done of outer most dimension. thickness of stone 25 30mm. 77 polished blue kota stone flooring skirting, laid over 20 mm thick base of c.m. 1 : 4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete :for area of each slab from 901 to 2000 sq.cm : 78 25 mm thick slab. 79 s/f of fire bricks on edg flooring with fire bricks suitable for 1300 degree centigrade safe working temperature as per is :8 specification laid on & filling of joint by fire resistant mortar/adhesive of required thickness as per directed on a bed of 20 mm thick 1:2 cement mortar of bricks 9 x 4.5x 3 (rate approved year 2008) 80 providing and fixing of glass moisac tiles ( bisseze marke ) size 20 x 20 x 4 mm applied with aaproved adhesive as per specification and direction of engineer in charge 81 providing and fixing staincase railing 90 cm high from nosing of made offollowing specifications. 82 50 mm outer dia (2 mm thick) s.s. pipe hand rail. 83 40 mm outer dia (2 mm thick) s.s. pipe baluster @ 1.00 mtr. 84 4 nos. 20 mm fs. s pipe intermediate runners parallel to hand. 85 s.s. shoe 1.60 mm thick 75 mm outer dia. at each baluster 86 baluster to be welded with s.s. plate 50 mm dia (3 mm thick) anchored in c.c. block with suitable dash fastners 87 50 mm dia & 2 mm thick s.s. pipe for start and end vertical ornamental posts to be provided as per direction of engineer in charge 88 the stainless steel work shall be brushed steel finish with all joints/welds properly grinded to final finish. the stainless steel shall be 304 grade and shall confirm to relevant i.s. 89 providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.extra if square,rectangular hollow tubularsections are used or grill made by flats only 90 decorative plaster work with spectrum textured coating as per approved colour and shade complete as per manufactures specifications. 91 grit textured @ 2.5 to 3.0 mm thick. 92 ornamental cement plaster in cement sand mortar1 : 4 making kangooras etc. as per jaipurpractice. 93 supplying and fixing machine cutdressed 75 mm pinksand stone (bansi paharpur) dasa/ coping wth ornamental shape having moulding and pan shape engraving as per required pattern with engraving depth of 5 mm (average) in single piece of length 90 cm to be laid on cement mortar 1:4 (12 to 20mm thick) including pointing with admixture of pigment matching with the stone shade. 94 providing corrugated g.s. sheet roofing including vertical / curved surface fixed with polymer coated j or l hooks, bolts and nuts 8 mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. 95 0.63 mm thick with zinc coating not less than 275 gm/m2 96 supply & spreading ofgood earth at site complete including loading unloading & transportation etc. 97 supply of dry manure including loading unloading,transportation & stacking at site. 98 farm yard manure(organic) 99 spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately). 100 laying of lawns including ploughing levelling breaking of clods manuring & removal of stones etc.(cost of manure or extra good earth to be paid seperately) maintenance of lawns for 30 daysor more till the grass forms a thick lawns free from weeds & fit fo 101 in rows 7.5 cms. apart in either direction 102 construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8 10 tonne to meet requirement of table 300 2 including cost of compensation for earth taken from private land with lead upto 1 km as per morth specification : clause no. 305. 103 rough chisel dressed stone flooring over 20 mm (av.) thick base in cm 1 : 6 including pointing with cement mortar 1 : 2 (1 cement : 2 stone dust) with and admixture of pigment to match the shade of stone with joint thickness upto 15 mm : 35 mm thick red sand stone. 104 p & f european type white glazed vitreous china 1st quality double syphonic w.c (is :2556 mark) with p or s trap including cutting and making good the wall and floor 105 p & f indian type white glazed vitreous china 1st quality w.c. orissa pan (is :2556 mark) with 100 mm vitreous china p or s trap including cutting and making good the wall and floor: 106 size 580x440mm. 107 p & f low level flushing cistern of 10 ltr. capacity (is : 2556 mark) o9f approved make with colplete fitting ,c.i. brackets duly painted , brass ball cock with ball, (is :1703 mark)complete including cutting and making good the wall. 108 wvc with c.p. brass bend. 109 p & f wvc wash basin (1st quality, i.s. : 2556 mark) of approved make with c.i. brackets duly painted, 1 no. 15 mm c.p. pillar cock (is : 8934 mark) &32 mm c.p. brass waste coupling of approved make, 25 mm g.i. waste pipe complete including cutting & making good the wall.: 110 size 550 mm x 400 mm dia for counter top 111 1.0 mm thick salem stainless steel aisi 304 & is 13983 1994kitchen sink of approved make (nirali, neel – kanth, jaina, faber castell )with large waste coupling. 112 (24 x 18 x 8) (20x16x8) 113 p & f inlet connection (angle valves) superior quality, of approved make, for wash basin, gyser etc. 114 c.p. inlet connection 15mm.brass (is : 8931 marked) with 37 cm long pipe and nut. 115 p & f pvc storage tank isi marked (is : 12701) indicating thebis license no),of approved make with cover, 25mm dia 1m long g.i. over flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 116 1000 litres capacity. 117 providing and fixingsuperior quality (jaguar contiental ) cp brassfittings complete as per direction of ei 118 bib cock with long thread 15 mm nominal size 119 brass / gunmetalhalf turnwt. 1 kg.ofapprovedquality / make,25mmnominalbore. 120 p & f full way valve (is:778 mark) or wheel valve of approved make 121 gun metal 32mm nominal bore. 122 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. (concealed work including cutting chases and making good the walls etc.,) 123 20mm nominal outer dia pipes 124 32mm nominal outer dia pipes 125 p&f rigid pvc pipe (is:4985 mark) class ii/ (4 kg. /cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. 126 110 mm dia 127 160 mm dia 128 p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality / make including joining the pipe with solvent cement rubber ring and lubricant: 129 coupler (socket) 130 110mm dia 131 160 mm dia 132 plain tee 133 110mm dia 134 160mm dia 135 door tee 136 110mm dia 137 bend 45 138 110mm dia 139 vent cowel 140 110mm dia 141 door bend (left & right) 142 110mm dia 143 pipe clip 144 110mm dia 145 plain floor trap 146 110mm dia 147 p trap 148 110mm dia 149 socket plug 150 110mm dia 151 door cap 152 110mm dia 153 construction of chamber in all type of soil with 300 mm thick masonry in cm 1:6 m 10 cm thick c.c. 1:5:10 in foundation, 20mm thick insider plaster in cm 1:6, finished with floating neat cement, 50mm thick m 15 grade c.c. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. 154 do size 450 x 450mm depth upto0.5 m cement cover with frame 155 wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) ofapproved make in surface / recessed isi marked medium duty pvc conduit & its accessories, round tiles,hot dipped galvanized modular box with earth terminal, 6 a modular switch,modular plate with grid plate,screws,making connections, testing etc. as required. 156 short point (up to 3 mtr.) 157 medium point (up to 6 mtr.) 158 long point(up to 10 mtr..) 159 wiring of twin control light point with 1.5 sq.mm fr pvc insulated unsheathed flexiable copper conductor 1.1 kv grade and 1.5 sq.mm.fr pvc insulated unsheathed flexiable copper earth conductor 1.1 kv grade(is: 694) of approved make in surface/ recessd isi marked medium duty pvc conduit & its accessories, round tiles, 18 swg m.s. box with earthing terminal, 6 amp two way switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. 160 medium point (up to 6 mtr) 161 wiring of 3 pin 6 amp light plug point with 1.5 sq.mm fr pvc insulated unsheathed flexiable copper conductor 1.1 kv grade and 1.5 sq.mm.fr pvc insulated unsheathed flexiable copper conductor 1.1 kv grade(is: 694) of approved make in surface/ recessd isi marked medium duty pvc conduit & its accessories, round tiles, 18 swg m.s. box with earthing terminal, 6 amp switch & 6 amp socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. 162 on board 163 medium point (up to 6 mtr) 164 long point (up to 10 mtr) 165 s&f following sizes (dia.) of isi marked medium duty pvc conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall, covering conduit and making good the same as required. 166 25 mm 167 32 mm 168 50 mm 169 supplying and fixing of power plug point modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost ofmodular 16 amp. switch and socket outlet, making connection , testing , etc. as required. 170 p&f metal clad industrial plug top & socket unit with pin and sleeve type contact on porcelain/ bakelite base in sheet steel enclosure (without mcb) including making connections, testing etc.as required 171 single / double pole(three pin) 172 32 a 173 providing & fixing isi marked 6 amp bakelite batten/angle holder including making connection testing etc. as required. 174 supplying and drawing fr pvc insulated & unsheathed flexible copper conductor isi marked (is:694) of 1.1 kv grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required. 175 2 x 2.5 sq. mm. + 1x1.5sqmm 176 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 177 p&f 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c/ d tripping characteristic) isi marked is 8828(1996)]/ conforming to iec 60898 in existing board/sheets including making connections, testing etc. as required. 178 single pole mcb 179 6 a to 32 a rating 180 four pole mcb 181 40 a 63 a rating 182 four pole mcb 183 6 a to 32 a rating 184 p&f recessed/ surface mounting heavy duty horizontal type sheet steel distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to is13032 & is8623 including making internal dbterminations with copper lugs , testing etc. as required. 185 double door (single phase) 186 12 way 187 double door (three phase) 188 8 way 189 p/laying p.v.c./ xlpe insulated & p.v.c. sheathed cable of 1.1 kv grade with aluminium conductor of is:1554 p i / is :7098 p i of group 1 of approved makein ground as per is:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand,iind class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 190 25.0 sq.mm 191 4 core 192 50.0 sq.mm 193 120.0 sq,mm 194 3.5 core 195 150.0 sq,mm 196 supplying and making one end termination with heavy duty single compression brass gland sibg type, heavy duty aluminium lugs duly crimped with crimping tool, pvc tape etc for following size of armoured pvc insulated & pvc sheathed/ xlpe aluminium conductor cable of 1100 volt grade as required of size. 197 3.5 x 120.0 sq.mm 198 4 x 25.0 sq.mm 199 p/laying p.v.c./ xlpe insulated & p.v.c. sheathed cable of 1.1 kv grade with copper conductor of is:1554 p i / is :7098 p i of group 1 of approved makein ground as per is:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand,iind class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 200 10.0 sq.mm 201 4 core 202 supplying and making one end termination with heavy duty single compression brass gland sibg type, heavy duty copper lugs duly crimped with crimping tool, pvc tape etc for following size of armoured pvc insulated & pvc sheathed/ xlpe aluminium conductor cable of 1100 volt grade as required of size. 203 4 x 10.0 sq.mm 204 sitc of wall/ free standing floor mounted dust and vermin proof compartmentalisedcubical panel made out of crca sheet , required hardware,duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shadethe panel having pu/ neoprene rubber gasket of not less than 3mm thickness , separate detachable gland plate m.s. base channel ,hinged door with locking arrangement for equipment/switchgear. thickness of sheet shallnot be less than 1.6 mm up to 600 mm length / widthof any compartment and be of 2.0 mm above 600 mm. load bearing structure shall beof 2.0 mmthick sheet supported by base m.s. channel if required . side walls and cable alley compartments having bolted type doors with / withoutdetachable extension type structure. (only outer area on all sides shall be measured & panel to be fabricated from cpri approved fabricator) 205 supplying and fixing of aluminium / copper bus barby means of smc / dmc type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable pvc sleeves. 206 electrolytic grade aluminium bus bar 207 sf of (0 500) v range volt meter on existing panel , making connection by pvc insulated copper conductor with pvc sleeves / channel etc. as required. 208 analog type ( 96mm x 96mm ) 209 sf of ct operated direct reading typeampere meter on existing panel , making connection by pvc insulated copper conductor with pvc sleeves / channel etc. as required. 210 analog type ( 96mm x 96mm ) 211 below 500 a 212 sf ofcurrent transformer, with all necessary support in existing panel including connection etc. as required . 213 up to 150/5 ratio, 10 va, class 1 accuracy 214 sf of selector switch of 10 a for voltmeter (4 position ) including making connection etc.as required . 215 sf of ct linked selector switch of 10 aforampere meter (4 position ) including making connection etc.as required . 216 sf of110/220 v, led (22.5 mm dia ) indicatinglamp with integral circuit, terminal block, including connection etc. as required. 217 red/yellow/green colour 218 supplying and drawing fr pvc insulated & unsheathed flexiable copper conductor isi marked (is:694) of 1.1 kv grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 219 1 x 1.5 sq.mm 220 1 x 2.5 sq.mm 221 1 x 4.0 sq.mm 222 1 x 6.0 sq.mm 223 sitc of self healing mpp/mp type shunt capacitor (banks) conforming to is:13340 41 / iec :831 1&2 in existing panel or parallel with load terminals , the capacitor shall be fitted with discharge resistors, pressure sensitive disconnector ( psd ) and shall have dissipation factor less than 0.0025 at 50 hz and total wattage loss less than 0.5 watt per kvar . including making connections with suitable capacity conductors/cables testing etc. as required. 224 heavy duty three phase 440 v , 50 hz capacitor (bank) 225 sitc of microprocessor based three phase sensingpower factor correction relay having following sensing capacitysecondary current , self analysing auto c/k setting according to targeted power factor setting, the relay shall havedigit display unit for display of real power factor, targeted power factor, lag/lead capacitor switching status, alarm output for under current, over current, insufficient compensation, indication of switching on units, auto/manual status, and shall have over load protection, no volt release , having multi parameter like kw, kva, kvar,metering facility as required. 226 6 to 8 stage 227 sensitivity upto 50 milli amp 228 p & f ofcam operated rotary switchs on existing panel with 2 way and off postion 229 one pole 230 16 amp 231 p & f of440 volt 3 pole capacitor(ac 6 b ) duty contactor with 3 no. early make and post break auxiliary contacts in series with quick discharge damping resistors/ reactors to limit the inrush current, conforming to is:13947 4 1/iec:947 4 1, din rail mounting type including making connections, testing etc. as required. suitable for following capacity capacitor bank. 232 up to 6 kvar 233 7 to 10 kvar 234 p&f 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c/ d tripping characteristic) isi marked is 8828(1996)]/ conforming to iec 60898 in existing board/sheets including making connections, testing etc. as required. 235 triple pole mcb 236 6 a to 32 a rating 237 p&f on load change over switch, front handle operated, four pole 415 v conforming to is:13947 p iii including connections , testing etc. as required in the following rating: 238 open execution type 239 200 amp 240 sitc of quick make and quick break4 polecurrent limiting mccb having following current rating, short circuitbreaking capacityat 440/415 v, 50 hz; o/l & s/c settings and conforming to is 60947 2 / iec 60947 2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for uvr , shunt trip ,earth fault trip, push( test) to trip , including making connections with lugs & spreaders,etc. as required. 241 with thermal magnetic release 242 up to 160 amp , 25 ka, adjustable o/l & fixed s/c setting, ics = 100 % icu 243 plate earthing as per is:3043 withcopper earth plate of size 600mm x 600mm x 3.0mm by embodying3 to 4 mtr. below the ground level with 25mm dia. g.i. b class watering pipe including all accessories like nut, bolts, reducer, nipple ,wire meshed funnel, and c.c.finished chamber covered with hinged type with locking arrangement c.i. cover,c.i. frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. 244 s & laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 245 8 swg copper wire 246 providing & fixing of heavy duty capacitor start 900/1400 rpm single phase isi marked exhaust fan is:2312 marked in existing opening making connections, testing etc. as required 247 300 mm sweep (900/1400 rpm) 248 p & f double ball bearing capacitor start, aluminium body & blade ceilingfanwith down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. 249 1400 mm sweep 250 p & f of ip 20 led tube light 20 watt with external batten made from crca sheet steel suitable to replace t 8/t 12 tube light, integral driver, 2000 luman + 5% tolerarrce system luman efficiacy of 100 lm/ watt minimum expected life time of 25000 burning hours, cct 5700 k ansi, cri 80, driver efficiency >85%, life expectancy of driver rnin 30000 hrs. pf 0,95 at full load/ 230 volt ac. 251 p & laying xlpe insulated is:7098/ii/85 of group1 and approved make h.t.cable for working voltage 11 k.v.earthed direct in ground including excavation of 30cmx100cm size trench, 25cmlayer of river sand, iind class bricks covering, refilling earth, compaction of earth, making necessary connection testing etc.as required of size. 252 3 core 185.0 sq.mm ...

Department Of Local Bodies - Rajasthan

31810325 civil work for auditorium for nagar parishad, dausa, rajasthan civil work for auditorium for nagar parishad, dausa, rajasthan earth workclearing grass and removal of rubbish (maximum 150mm) by manual means and disposal at a lead of 50 metres as per mort&h specification clause 201. 2 earth work in excavation in open area, stp, wtp, pumping station with mechanical means including dressing of sides and ramming of bottoms, including getting out the excavated material, disposal of excavated material lead upto 1000m at suitable site as per as per drawing and as per direction of engineer. (measurements for payment to be done as per standard drawings). in all type of soil. upto 3.0 m depth. 3 earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of engineer for following depths, below natural ground / road top level. in all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. depth upto 1.5 m. 4 add extra for over all depth of excavation above 1.5 m and upto 3.0 m over item no 4.10.1.1 5 in ordinary rock. depth upto 1.5 m. 6 add extra for over all depth of excavation above 1.5 m and upto 3.0 m over item no 4.10.2.1 7 carriage of materials by mechanical transport including loading, unloading and stacking ::upto 1 km 8 stone, boulders, gravelly materia 9 earth filling with available surplus soil excavated from foundations and taken only from outside of building plinth in layers not exceeding 20cm in depth, consolidating each deposited layer including ramming and watering and consolidation with lead up to 50 m and lift upto 1.5 m. 10 diluting and injection chloropyrifos emulsifiable concentrate 20% with 1% concentration for pre constructional anti termite treatment as per is 6313 part iii as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which approach is to be laid surrounding of pipes and conduits etc. complete as per specification (plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion). 11 providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of mort&h specifications with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification including all material, labour, machinery as per clause 710.1.4 of irc:78 and clause 2200 of mort&h specification. 12 concrete work 13 providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 14 making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 15 reinforced cement concrete 16 providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement all work upto plinth level 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). (as per design mix). 17 reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement :1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) (as per design mix) 18 reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement: m 30 grade concrete. 19 reinforced cement concrete work in arches, arch ribs, domes, vaults, shells, folded plate and roofs having slope more than 15° upto two stories excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 20 providing and laying upto two stories reinforced cement concrete in kerbs, steps and the like excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 21 add extra for laying reinforced cement concrete above two stories (or 7.50 mtr height above plinth level) for every one storey or 3.00 m height or part thereof. 22 centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete. 23 walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. 24 suspended floors, roofs, landings, balconies and access platform. 25 lintels, beams, plinth beams, girders, bressumers and cantilevers. 26 columns, pillars, piers, abutments, posts and struts.22.1.5 27 stairs, (excluding landings) except spiral staircases. 28 extra for shuttering in circular work (20% of respective centring and shuttering items). 29 edges of slabs and breaks in floors and walls. under 20 cm wide. 30 weather shade, chajjas, corbels etc., including edges. 31 add extra for doing centering and shutteriing work for every additional height of 1 metre or part thereof beyond initial 7.5 metre height from plinth level. 32 reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete. thermo mechanically treated bars. 33 brick / stone masonery work 34 brick work with fps bricks of class designation 75 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand). 35 brick work with fps bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in cement mortar 1:4 (1 cement : 4 coarse sand). 36 half brick masonry with fps bricks of class designation 75 in superstructure above plinth level upto two stories. cement mortar 1:3 (1 cement :3 coarse sand). 37 extra for providing and placing in position 2 nos. 6mm dia. m.s. bars at every third course of half brick masonry. 38 random rubble stone masonry work in cement mortar with mechanical mixer in foundation (at any level) complete as per drawing and technical specification and as per clause 1000 and 1400 of mort&h specification including all scaffolding material, labour, machinery but excluding pointing and plastering. in cement mortar 1:4 (1 cement : 4 coarse sand). 39 providing and fixing granite stone slab mirror polished and machine edge cut in walls, pillars, steps, shelves, sills counters, floors etc. laid on 12mm (av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. green / black above 3601 cm2 slabs. 40 extra for providing edge moulding to 15 18mm thick marble/ granite stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge. granite/kota stone work. moulding. 41 extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete 42 providing and fixing 1st quality mat finished ceremic tile size 300x300mm confirming to is : 13755 and is : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 43 extra for using marble printed / granite shade or dark shade tiles instead of white, grey, ivory, fume red brown, light green, light blue and other light shades in glazed tiles and mat finished tiles 44 providing and fixing motive pieces all coloures for glazed tiles laid over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white mixed with pigment of matching shade complete. size 200 x 300mm. 45 p & f 1st quality vitrified porcelain polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to is 15622 of approved make in all colour and shade, laid with 20 mm thick cm 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm x 600 mm. 46 providing and fixing 1st quality mat & glossy finished ceramic tiles colour such as standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades with water absorbtion less than or equal to 0.08% confirming to is : 13753 & is : 15622 in floor, steps etc laid on bed on neat cement slury finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the the cost of cement mortar bed 1:4) size 300mm x 450mm. 47 providing and fixing 1st quality ceramic glazed vitrified tiles of colour standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades with water absorbtion less than or equal to 0.08% confirming to is : 13753 & is : 15622 in floor, steps etc laid on bed on neat cement slury finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete. (excluding the the cost of cement plaster on wall and pillar). size 600mm x 1200mm 48 38mm thick wood block flooring of first class teak wood laid over 25mm thick levelling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10mm nominal size) to be paid separately coated with a thin layer of hot bitumen (blown type) @ 2.45 kg per sqm. including fixing blocks in position after dipping in hot bitumen (blown type) upto half depth, planed, levelled smooth and finished complete. 49 kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 50 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. red sand stone. 51 extra for pre finished nosing in treads of steps of kota stone/ sand stone slab. 52 roofing 53 providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design in 75x75mm deep chase. 54 providing corrugated g.s. sheet roofing including vertical/ curved surface fixed with polymer coated j or l hooks, bolts and nuts 8 mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80mm thick with zinc coating not less than 275gm/m². 55 extra for circular cutting in c.g.s. sheet roofing for making opening of area exceeding 40 square decimetre 0.80 mm thick 56 providing and fixing 15 cm wide 45 cm over all semi circular plain g.s. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80mm thick with zinc coating not less than 275gm/m² 57 cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement : 4 fine/ coarse sand) 58 cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand). 59 cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of lime wash on top of walls when dry for bearing of r.c.c. slabs and beams. 60 extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. 61 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) toplayer 6mm thick with cement mortar 1:4 (1 cement : 4 fine sand). design on outer plaster. 62 extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. 63 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: two or more coats on new work. 64 finishing walls with acrylic smooth exterior paint of required shade new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). 65 painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work. 66 providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete 67 providing and fixing thermal insulation with resin bonded fibre glass wool conforming to is : 8193, density 16kg/m3 , 50mm thick, wrapped in 200g virgin polythene bags placed over existing false ceiling and held in position by criss crossing gi wire. 68 providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving screws, over expansion joints on vertical surfaces/ceilings with full threaded, cadmium plated steel screws 4mm dia. stem, 30mm long and aluminium washers 2mm thick, 15mm dia. at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete. powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron). 69 filling the gap in between aluminium frame & adjacent rcc/ brick/ stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of engineer in charge complete. upto 5mm depth and 5 mm width. 70 providing and laying expansion joint complete as per drawing and technical specification and as per clause 2605 of mort&h specification including all material, labour, machinary etc. 71 fillar joint with 20m thick compressible fibre board. 72 fillar joint with joint sealing compound with coarse sand and 6 %bitumen by weight. 73 structural steel work riveted,bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: hot finished seamless type tubes. 74 providing and fixing t iron frames for doors, windows and ventilators of mild steel tee sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 75 providing and fixing pressed steel door frames confirming to is: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre treatment of the surface as directed by engineer in charge: profile c 76 providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer. m.s. tube. 77 providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of t iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. 78 providing and fixing external grade board solid core single leaf flush door shutters isi 2202 67 marked using phenol formal dehyderesin in glue both sides including approved isi marked stainless steel butt hinges fittings with necessary screws complete as per annexure a : 30 mm thick decorative teak veneer both side. 79 extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured). decorative teak veneer both side. 80 extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) rectangular or square. 81 extra for cutting rebate in flush door shutters for making double leaf shutter(total area ofthe shutter to be measured). 82 providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised m.s. screws including drilling holes in masonry work /cc/ r.c.c. and making good etc. complete. 50 mm long. 83 providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with c.p. brass screws and wooden plugs, etc., wherever necessary complete: 20 mm dia. 84 providing and fixing to existing door frames. 30mm thick factory made solid both side pre laminated panel pvc door shutter consisting of frame made out of m.s. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. m.s. frame shall have a coat of steel primers of approved make and manufacture. m.s. frame covered with 5mm thick heat moulded pre laminated pvc c channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide pvc sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide pvc sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross pvc sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side pre laminated pvc sheet to be fitted in the m.s. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide pvc sheet beading on inner side, and joined together with solvent cement adhesive. an additional 5mm thick pvc strip of 20mm width is to be stuck on the interior side of the c channel using pvc solvent adhesive etc. complete as per direction of engineer in charge. manufacturer’s specification & drawing (for w.c. and bathroom door shutter). 85 aluminium work 86 providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required pvc/neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. (glazing and panelling to be paid for separately) : for fixed portion. anodised aluminium (anodised transparent or dyed to required shade according to is: 1868, minimum anodic coating of grade ac 15). 87 for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of pvc / neoprene gasket required (fittings shall be paid for separately). powder coated aluminium (minimum thickness of powder coating 50 micron). 88 providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood pre laminated one side decorative lamination on other side balancing lamination grade i, type ii, is : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 25 mm thick 89 providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with pvc/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer incharge . (cost of aluminium snap beading shall be paid in basicitem) : with float glass panes of 5.50 mm thickness. 90 providing and fixing double action hydraulic floor spring of approved brand and manufacture is : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece m.s. sheet outer box with slide plate etc. complete as per the direction of engineer in charge. with stainless steel cover plate. 91 providing and fixing stainless steel (ss 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of engineerin charge complete. 355 x 19 mm. 92 interior work 93 false ceiling 94 providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from m.s. sheet and galvanised in accordance with zinc coating of grade 350 as per is : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to g.i. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to g.i. channel with connecting clips made out of 2.64mm diax230mm long g.i. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the engineer in charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum board conforming to is: 2095 part i, 95 sanitary items 96 plumbing 97 providing and fixing unplasticised p.v.c. connection pipe with ptmt nuts collar and bush of approved quality and colour. 98 15 mm nominal bore with 3 cm length. 99 15 mm nominal bore with 45 cm length. 100 providing and fixing ptmt ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with l.p./ h.p.h.d. plastic ball.20 mm nominal bore, 120 mm long. weighing not less than 198 gms. 101 providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete : 102 15 mm nominal bore 103 20 mm nominal bore 104 25 mm nominal bore 105 providing and fixing gun metal non return valve of approved quality (screwed end) : 106 25 mm nominal bore horizontal 107 25 mm nominal bore vertical 108 providing and placing on terrace (at all floor levels) polyethylene water storage tank isi : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 109 sanitary 110 providing and laying flanged c.i. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per is : 1538 : upto 300 mm dia. 111 providing and laying s&s centrifugally cast (spun) iron pipes (class la) conforming to is 1536 : 112 100 mm dia. pipe 113 125 mm diameter pipe 114 providing lead caulked joints to spun iron or c.i. pipes and specials including testing of joints but excluding the cost of pig lead : 115 100 mm diameter pipe 116 125 mm diameter pipe 117 supplying pig lead at site of work. 118 providing, laying and jointing glazed stoneware pipes grade ‘a’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 200 mm diameter 119 constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) r.c.c. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : 120 inside size 90x80 cm and 45 cm deep including c.i. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : with bricks with class designation 75 121 inside size 120x90 cm and 90 cm deep including c.i. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : with bricks class designation 75 122 providing and fixing square mouth s.w. gully trap grade a’ complete with c.i. grating brick masonry chamber with water tight c.i. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size p type with bricks class designation 75. 123 constructing brick masonry road gully chamber 45x45x77.5 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast r.c.c. vertical grating complete as per standard design with bricks. 124 constructing brick masonry road gully chamber 110x50x77.5 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast r.c.c. horizontal grating with frame and vertical grating complete as per standard design with bricks 125 fixtures 126 providing and fixing white vitreous china pedestal type water closet (european type) with seat and lid, 10 litre low level white vitreous china flushing cistern & c.p. flush bend with fittings & c.i. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : w.c. pan with isi marked white solid plastic seat and lid. 127 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps,32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : white vitreous china surgeon type wash basin of size 660x460 mm with a pair of 15 mm c.p. brass pillar taps with elbow operated levers. 128 providing and fixing kitchen sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : white glazed fire clay kitchen sink of size 600x450x250 mm. 129 providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 130 rectangular shape 453x357mm 131 rectangular shape 1500x450 mm 132 providing and fixing 100 mm sand cast iron grating for gully trap 133 providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 134 providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet and 100 mm outlet 135 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931. 15 mm nominal bore 136 providing and fixing ptmt soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. weighing not less than 106 gms. 137 providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of engineer incharge and finished smooth. granite stone of approved shade 138 providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. 139 providing and fixing g.i. pipes complete with g.i. fittings and clamps, including cutting and making good the walls etc. 140 internal work exposed on wall 15 mm dia. nominal bore 141 internal work exposed on wall 20 mm dia. nominal bore 142 internal work exposed on wall 25 mm dia. nominal bore 143 internal work exposed on wall 32 mm dia. nominal bore 144 concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. 15 mm dia. nominal bore 145 concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. 20 mm dia. nominal bore 146 providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. external work : 147 15 mm dia. nominal bore 148 20 mm dia. nominal bore 149 25 mm dia. nominal bore 150 32 mm dia. nominal bore 151 painting g.i. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work : 152 15 mm dia. nominal bore 153 20 mm dia. nominal bore 154 25 mm dia. nominal bore 155 32 mm dia. nominal bore 156 painting g.i. pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality : 157 15 mm dia. nominal bore 158 20 mm dia. nominal bore 159 25 mm dia. nominal bore 160 32 mm dia. nominal bore 161 providing and fixing g.i. union in g.i. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 162 15 mm nominal bore 163 20 mm nominal bore 164 25 mm nominal bore 165 water harvesting system 166 construction of tube well upto 100 meter depth and above in all type of rocks by dth system and over burden to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes but excluding cost of casing pipes as per is : 2800 (part i & ii) 1979 specifications. the work would be completed after obtaining sand free water. the tube well should have a throughout bore as per nominal dia of casing pipe: 200 mm dia nominal bore 167 supply of strainer pipes made of erw m.s. black pipe isi mark of following sizes at the site of work including required size of slotting as per is:8110 1985 of following nominal bore sizes at site of work. 200 mm dia 168 supply and fixing of m.s. clamp set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. 169 providing & lowering of g.i. flange pipe b class including rubber washer and nuts of 8 mm dia complete in all respect. 50 mm dia 170 development of tube well as per is specification using suitable compressor to give sand free water for required yield of the gravel packed tube well. 171 electrical g schedule 172 wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) ofapproved make in surface / recessed isi markedmms ( is:9537 p iii ) pvc conduit & its accessories, round tiles,18 swg m.s. box with earth terminal, 6 a switch, 3.0 mm thick isi marked phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required. 173 short point (up to 3 mtr.) 174 medium point (up to 6 mtr.) 175 long point(up to 10 mtr..) 176 wiring of twin control light / fan / call bell point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) of approved make in surface / recessed isi marked mms ( is:9537 p iii ) pvc conduit & its accessories, round tles,18 swg m.s. box with earth terminal, 6 a two way switch, 3.0 mm thick isi marked phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required. 177 short point (up to 3 mtr.) 178 medium point (up to 6 mtr.) 179 long point(up to 10 mtr..) 180 wiring of 3 pin 6 amp. light plug point with 1.5 sq. mm fr pvc insulated unsheathed 1.1 kv grade flexible copper conductor and 1.5 sq.mm fr pvc insulated unsheathed 1.1 kv grade copper earth conductor (is:694) of approved make double lock/ isi marked single lock pvc casing capping & its accessories, 18 swg m.s. box with earth terminal, screwless cage connectors for neutral looping in switch board & falce ceiling point, 6 a switch, 6 a socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. 181 on board 182 short point (up to 3 mtr.) 183 medium point (up to 6 mtr.) 184 long point(up to 10 mtr..) 185 s&f following sizes (dia.) of isi marked medium duty pvc conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. 186 20 mm 187 25 mm 188 32 mm 189 supplying and drawing fr pvc insulated & unsheathed flexible copper conductor isi marked (is:694) of 1.1 kv grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 190 3x 1.5 sq.mm 191 2 x 2.5 sq. mm. + 1x1.5sqmm 192 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 193 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm. 194 4 x 10.0 sq.mm 195 4 x 16.0 sq.mm 196 supplying and drawing pvc jacketed with annealed bare copper inner conductor & tinned copper conductor shielding foam pe dielectric coaxial cable of approved make in existingsurface or recessed conduit/casing capping including making connections as required. 197 rg 6 198 rg 11 199 supplying and drawing pvc/ polythene insulated and pvc sheathed unarmoured/ armoured telephone cable with 0.5 mm dia. tinned / annealed copper conductor taped &confirming to itd specification s/ws 112c &113 c of approved make in existing surface or recessed conduit/casing capping. 200 unarmoured 2 pair 201 unarmoured 10 pair 202 unarmoured 20 pair 203 unarmoured 50 pair 204 jelly filled armoured (pijf) 5 pair 205 jelly filled armoured (pijf) 10 pair 206 jelly filled armoured (pijf) 20 pair 207 jelly filled armoured (pijf) 50 pair 208 p&f recessed/ surface mounting heavy duty horizontal type sheet steel distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar masking sheet conforming to is13032 & is8623 including making internal db terminations with copper lugs , testing etc. as required. double door (three phase) per phase isolation 209 2+8 way 210 2+12 way 211 providing & laying xlpe insulated / p.v.c. sheathed cable of 1.1 kv grade with aluminium conductor armoured of is:7098 i/1554 1 approved make in ground as per is:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 212 2.5 sq. mm 4 core 213 4.0 sq.mm 4 core 214 6.0 sq.mm 4 core 215 10.0 sq.mm 4 core 216 16.0 sq.mm 4 core 217 25.0 sq.mm 3.5 core 218 35.0 sq.mm 3.5 core 219 50.0 sq.mm 3.5 core 220 70.0 sq,mm 3.5 core 221 95.0 sq.mm 3.5 core 222 120.0 sq.mm 3.5 core 223 150.0 sq.mm 3.5 core 224 240.0 sq.mm 3.5 core 225 300.0 sq.mm 3.5 core 226 supplying and making one end termination with heavy duty single compression brass gland sibg type, heavy duty aluminium lugs duly crimped with crimping tool, pvc tape etc for following size of armoured pvc insulated & pvc sheathed/ xlpe aluminium conductor cable of 1100 volt grade as required of size. 227 3.5 x 25.0 sq.mm 228 3.5 x 35.0 sq.mm 229 3.5 x 50.0 sq.mm 230 3.5 x 70.0 sq.mm 231 3.5 x 95.0 sq.mm 232 3.5 x 120.0 sq.mm 233 3.5 x 150.0 sq.mm 234 3.5 x 240.0 sq.mm 235 3.5 x 300.0 sq.mm 236 4 x 2.5 sq.mm 237 4 x 4.0 sq.mm 238 4 x 6.0 sq.mm 239 4 x 10.0 sq.mm 240 4 x 16.0 sq.mm 241 supply, fabricating & installing following sizes of perforated cable trays including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with suspenders and including painting as required. hot dipped galvanized. 242 150mm x 50mm x 1.6mm 243 300mm x 50mm x 1.6mm 244 450mm x 50mm x 2.0mm 245 600mm x 50mm x 2.0mm 246 maintenance free gel earthing with pipe in pipe /strip in pipe technology filled with anti corrosive conductive compound (cpri tested) below the ground in 150 200 mm dia earth pit and surrounding filled with required mineral filling compound (mfc should have hygroscopic proper ty to retain the moisture for long time to create low resistance zone) and c.c. finished chamber covered with hinge type with locking arrangement c.i cover. c.i. frame of size 300mm x300mm complete testing of earth resistance as required of following sizes with pipe in pipe technology (inner pipe dia / outer pipe dia) 80 100 micron g.i. coating with pipe in pipe technology with 80 100 micron g.i. coating g.i. pipe 3000 mm long , 80/40 mm , terminal 14 mm g.i. strip 247 s & laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 248 8 swg copper wire 249 25mm x 3mm copper strip 250 50mm x 6mm copper strip 251 25mm x 3mm g.i. ( hot dipped) strip 252 25mm x 6mm g.i. ( hot dipped) strip 253 p & f of ip20 led recessed/ surface mounted round/ sqaure non dimmable downlight with die cast aluminum housing & heat sink for heat dissipation, high purity reflector with external driver having efficiency > 85% and in compliance to iec standards. ( supplied together with luminaire) power consumption of =< 7w/10w/8w/12w/15w/18w with 100/500/750/1100/1250 lumens, system lumen, efficeancy of 70 lm / watt or 100 lm / watt output suitable to replace 1x18w/ 2x18w/2x26w cfl downlights, life time of 50000 burning hours with 70% of intial lumen maintained. cct 3000° k, 4000° k and 6000° k. fixture shall be ce compliance. 254 recessed mounting led downlight 18/20w 255 surface mounting led downlight 18/20w 256 p & f of ip20 led ceiling/ recessed/ suspended mounting light fixture made form crca sheet steel housing, high purity/ transmisivity diffuser for uniform light distrubution.high efficiency driver electronics having efficiency > 85% and in compliance to iec standards.(integral driver). power consumption of 40 w/50w/60w, 3000/3300/4200 lumens, system lumen efficiency of 70 80 lm / watt output suitable for 2x36w ftl/ 2x36w cfl/3x36w cfl light fixtures, life time of 50000 burning hours with 70% intial lumens maintained. cct 3000° k, 4000° k and 6000° k. fixture shall be ce compliance. surface mounting 36w led light 2’x2’ with acrylic/ prismatic front cover 257 p & f energy efficient direct fit (retrofit) led tube system (with integral driver), on existing fixture. power consumption of18w / 36w 1500 3000 lumens, system lumen efficiency 80 lm/watt output, life time of 50,000 burning hours with 70% initial lumen maintained. cct 3000°k, 4000°k& 6000°k. 4 led tube shape fixture 18w. 258 p/ f ip 65/ ip 66 protected street light luminaries on existing bracket. fixture made from powder coated single piece pressure die cast aluminum housing with heat dissipation fins on housing with high power leds . diffuser / glass cover for ensuring ip 65 protection for lamp and control gear compartment, system lumen output of 100 lum/watt high power led. integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to iec standards. system life of 50000 burning hours with 70 % of initial lumens maintained. fixture shall be in ce compliance. ip 65 protected led street light luminaries led street light fixture 150 watt 259 supply and erection of octagonal pole of following length and dimension as per table 3 with base plate on the cement concrete foundation of m 15 /m 20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (is 1367 p iii ). the pole shall be made of s 355jo grade steel sheet , folded lengthwise to obtained octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with is 2629. the pole shall have a weatherproof flush door and locking arrangements. the complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning. 9 mtr. 260 supply, installation, testing and commissioning of copper wound transformers 33/0.433 kv, three phase, 50 hz, dyn 11, onan type , standard accessories with off load tap changer (+5% to 10% in steps of 2.5%), winding / top temperature rise of 45°c/40°c first fill oil, having permissible total loss values not exceeding 7.5% of the maximum total loss values for 11 kv as per energy efficiency level 2 at basic insulation level conferming to iss 2026 (part i to part ii), latest ammended and is 1180 part i : 2014. transformers described as above and as per the following continuous rating. 315kva 261 supply, installation, testing and commissiong of indoor type floor mounted metal clad, 11 kv incomer vcb panel up to 630 a equipped with following switchgears and accessories designed & tested as per latest standard i.e. iec 62271 200, suitable for stc 25ka/3 and iac a flr for 25ka/1sec. make of ht panel, vaccum interrupter and vcb should be of same make. 11 kv / 110 volts pt class 0.5 accuracy and 100 va burden with 1no. voltmeter (0 12 kv), analog type, selector switch for voltmeter and protection fuses/mcb for ht metering upto 12 kv on incomer, ammeter, analog type, selector switches for ammeters, microprocessor based numerical relay with o/l, e/f and s/c protection, set of dual core dual ratio 3cts of suitable ratio with sec 1 of 15 va burden and accuracy class – 0.5 for metering and class 5p10 for protection, multifunction meter. 262 sitc of dg set complete with 1500 rpm diesel engine of suitable bhp & ac brush less spdp alternator mounted on a common base frame & coupled through a flexible coupling or close coupled.alternator shall be self regulated with standard alternator protection( over voltage, over speed & under voltage). engine shall have residential silencer, up to 10 m exhaust piping , electronic / mechanical governor, manual & electric start, batteries, fuel tank ( with stand) & piping, control panel (16 g) with mccb (4p; 25 ka), ammeter, voltmeter, frequency meter, energy meter & hour meter, engine instruments panel, avm and with weatherproof, powder coated accoustic enclosure for dg set for sound attenuation fabricated from 1.6 mm crca sheet steel (structure) with side wall fabricated from 1.6 mm crca sheet and filled with foam as per cpcb norms latest amendments & is 8183 .the doors are fabricated from 1.6 mm crca sheet packed with accoustic material, floor of ms chequrred plate 5.0 mmthick, all doors/ opening are sealed with neoprene/ epdn gaskets. the enclosure has built in fuel tank, residential silencer (isolated from main dg chamber) with protection and tripping of dg set against temperature of more than 50 °c. all controls for operation of dg set are from outside the enclosure with dg control panel having microprocessor based genset monitoring and control system mccb ammeter, voltmeter, pf meter, frequency meter, kwh meter, ind. lamps etc. mounted inside enclosure , visible and accessible from outside. the enclosure should be suitable for following capacity dg sets and alternator. noise level is less than 75 db (a) at a distance of 1 mtrs. duly certified by authorized agency. complete in all respect of following capacity : radiator cooled and turbo charged 250 kva at 0.8 pf 415v 50hz 3 ?. 263 supply, installation, testing & commissioning of ht metering cubical panel as approved by discoms fabricated out of 14 swg crca sheet steel in two compartment & ms angle of size 60mmx6mm having provision for following: (i) provision for fixing trivector meter (to be supplied by discoms) (ii) provision for fixing of combined ct pt set (to be supplied by discoms) (iii)tt block (iv) 6mm bakelite sheet on all sides. 264 supply, installation, testing and commissioning of 11 kv double pole structure with air break switch having following specifications : (a) dp : double pole structure made of two nos. 9 meter long pcc poles (400 kg) & 7 nos. ms channel each of size 100 mmx50mmx2500mm complete with earthing of the structure as per rec standards in all respect with nuts, springs washers, clamps as required. (b) go:off load type gang operated 3 pole vertical flute type switch suitable for 11kv ; 400a ,3 phase, central post rotating double break isolator complete with ms hardware , copper moving & fixed contact ,assembly of 9 nos pin insulator ,gi pipe of suitable length for operation.c) do: 3 nos. horizontal/vertical mounted 33kv horn gap fuse set / drop out fuse set, 33kv barrel fuses mounted on 6 nos. post insulators. (c) do: 3nos vertical / horizontal mounted 11kv horn gap fuse set /drop out 11kv barrel fuses mounted on 6no pin insulators (d) la:3 piece non linear resistor type. lighting arrestor of approved make suitable for 3 wire, 11kv oh linewith rated voltage of 9kv rms & nominal discharge current rating of 5 ka & complete with galvanized clamping arrangement gi bolts, nuts, washer etc as required. (e) jumpers: 3 no 11kv acsr conductors mounted on pin type insularors as required. general:the go shall be operated by hand operated liver properly earthed with provision for locking mounted at 3’ 265 fire alarm g schedule 266 sitc of microprocessor based 2 wire loop (each loop accessing 90 addressable units ) fire alarm control panel. the panel shall be able to give pin point location of addressable units via the address code for each unit. the panel shall also be able to automatically switch off all control switches when ever any alarm is triggered. the panel shall also be able to give voice announcement to individualized speakers. the panel shall have built in sounder, maintenance free batteries of minimum 15 ah of 24 volts capable of minimum of 12 hours with battery charger, rectifier. loop cards, lcd unit to indicate fire / fault signal of individual unit, built in built / external printer, to log all incoming data etc complete in all respect. 2 loop. 267 sitc manual call point complete with , glass, hammer and chain etc as required: analogue addressable type 268 sitc automatic commendable control switches for shutting downac plant, power supply, gas supply etc. response indicators. 269 sitc fault isolators for isolating shorted, dead wire and loose circuits between two successive fault isolators with automatic resetting arrangement. analogue addressable type. 270 fire fighting g schedule 271 sub head i (wet riser system pumping equipments)sitc of electric driven sprinkler / hydrant pump suitable for automatic operation consisting of the following (a) horizontal multi stage centrifugal suction type pump complete for delivery of below mentioned discharge complete with necessary sluice value on the suction side ( all items to be matching the suction side of the pump) and pressure gauge sluice value and non return valve on the delivery side side ( all of the necessary dia) and including bypass arrangement for testing of pump.(b) squirrel cage induction motor suitable for 415 v, 50 hz, ac supply of below mentioned hp for the above pump ,1450 rpm t.e.f.c confirming to ip:55 and flexible coupling and coupling guard with the pump. (c) common bed plate fabricated from mild steel channel or cast iron type1620 lpm at 70 mtr head ( 50 hp motor) 272 sitc of diesel engine drive standby pump suitable for automatic operation consisting of the following a, b, c. .the diesel driven pump shall be suitable for following discharge:(a) horizontal multi stage centrifugal suction type pump complete for delivery of below mentioned discharge complete with necessary flexible pipe, sluice value on the suction side (all items shall be matching the suction side of the pump) and pressure gauge, sluice valve and non return valve on the delivery side (all of the necessary dia) and including bypass arrangement for testing of pump.(b) water cooled diesel engine developing suitable bhp for the below mentioned discharge at 1800 rpm, flexible coupling and coupling guard with the pump, common bed plate for mounting of the engine and pump, d cushy foot, damping arrangement by cushy foot, diesel engine starting panel for starting of the engine automatically with a unit of battery of 12/24v, 88 ah, 13/21 plate, exhaust pipe of minimum 10 m length, with muffler, day oil tank of 300 1ts capacity with first charge and hand operated oil pumpingset, supply, installation, testing, & commissioning of electric driven automatic pressurization pump setc) horizontally mounted single stage centrifugal end delivery pump of below mentioned discharge with necessary sluice valve on the suction side (all items matching the suction side of the pump) and sluice valve, non return value, pressure gauge on the delivery side including by pass arrangement for testing of the working of the pumping set as required.1620 lpm at 70 mtr head ( 50 hp engine) 273 sitc of jockey pump having squirrel cage induction motor suitable for 415 v, 50 hz ac supply with synchronous speed of 2900 rpm t.e.f.c type confirming to ip:55 and flexible coupling and coupling guard with the pump ,common bed plate of fabricated mild steel channel or cast iron type. 180 lpm at 70 mtr (15 hp). 274 supplying & installing cylindrical type air vessel, 250 mm dia 1.5m high of thickness 6.0 mm m.s. complete with air release valve, safety valve, pressure gauge etc.along with two coats of red oxide and two coat of post office red enamel paint as required. 275 providing & fixing 100mm dia pressure gauge on pump deliveryline complete with shut off cock. 276 sitc of pressure switches for main, jockey, and standby pumps,including necessary wiring upto control panel and stop valve. 277 sub head ii (hydrants system) 278 providing and fixing single headed hydrant valves with flanged inletisi marked with 63 mm female instantaneous outlet of gun metalcomplete with blank cap and chain conforming to is : 5290 279 providing . 63 mm dia 15 m long reinforced rubber hose pipeconforming to is : 636 1962, part –a & isi marked with gun metalmale & female coupling wire wound with the pipe. 280 providing & fixing (1.0 m x .45 m x 0.6 m ) outdoor hosecabinet suitable for accommodating hydrants made of not lessthan 16 swg. m. s. sheet having central opening glazed doorincluding necessary locking arrangement, painting (one coat primer& two coats of paint ) and housing 2 nos. rrl hose pipe, 1 nobranch pipe. 281 providing and fixing swinging drum type hose reel isi marked 30m(l) x 20 mm (dia) rubber lined pipe with shut off nozzle of 6 mm diaincluding the cost of 25 mm dia pipe connection from riser to hosereel , all sockets, nipples, elbows and 25 mm globe valve. 282 providing and fixing isi marked three way fire brigade inlet to wetriser with non return valve complete in all respects 283 providing, fixing, jointing and testing of heavy gauge (c class ) mspipe isi marked with accessories like tees, elbows, flanged joints,reducers, compressed asbestos gaskets, nuts and bolts includingfixing the pipe with suitable flat iron strip clamps /bracket, paintingetc. complete as required for delivery/ suction manifold relating tothe pump including painting of two coats of red oxide and two coatof post office red enamel paint including all civil breakages andmaking good the same : 284 200mm dia 285 150 mm dia 286 80 mm dia 287 sub head iii (piping, valves and accessories) 288 ms (medium duty b class) pipe with cleaning,wrapping and coatingof the pipe as per is; 10221 in all kind of soil at 1.0 m depthincluding excavation as required. 289 150 mm dia 290 100 mm dia 291 80 mm dia 292 providing & fixing butterfly valve with cast iron body, cast iron discand seat of nitrile rubber bonded on bakelite with hard back to pn1.6 rating with following sizes complete with bolts, washers andcompressed asbestos gasket as required 293 150 mm dia 294 100 mm dia 295 80 mm dia 296 providing and fixing non return valve complete with bolts nuts washers and compressed asbestos gasket etc as required : 297 200 mm dia 298 150 mm dia 299 80 mm dia 300 carbon dioxide type fire extinguisher with cylinder fully charge of 4.5kg capacity. 301 providing, fixing, testing & commissioning of sprinkler heads of thefollowing type : pendant type with quartziod bulb, operating temperature at 68 deg cas per specifications. 302 providing & fixing 10 swg chrome plated brass 100 mm diadecorative flanges / escutcheon plates to be fixed at junction ofsprinkler piping with the false ceiling. 303 sub head iii (piping, valves and accessories) 304 sub head iv (fire electrical control panel) 305 supplying and making end termination with heavy copper lugs (pin/ring type) duty crimped with crimping tool, pvc tape etc of followingsize 306 1.5 sq.mm 307 10.0 sq.mm 308 35.0 sq.mm 309 supply, fabricating & installing following sizes of perforated cable trays including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with suspenders and including painting as required. 100mm x 50mm x 1.6mm 310 boundary wall g schedule 311 earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of engineer for following depths, below natural ground / road top level. in all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. depth upto 1.5 m 312 excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. 313 providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level : 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 314 providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement all work upto plinth level : 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). (as per design mix) 315 reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement: m 30 grade concrete. 316 centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete. 317 lintels, beams, plinth beams, girders, bressumers and cantilevers. 318 reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete. thermo mechanically treated bars 319 pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : raised and cut pointing. 320 random rubble stone masonry work in cement mortar with mechanical mixer in foundation (at any level) complete as per drawing and technical specification and as per clause 1000 and 1400 of mort&h specification including all scaffolding material, labour, machinery but excluding pointing and plastering. in cement mortar 1:4 (1 cement : 4 coarse sand) 321 structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: 322 earth work 323 dressing of earth work in surface excavation including cutting and filling upto 30cm depth including disposal of excavated earth upto 50m and lift upto 1.5 m. 324 earth work in excavation in open area, stp, wtp, pumping station with mechanical means including dressing of sides and ramming of bottoms, including getting out the excavated material, disposal of excavated material lead upto 1000m at suitable site as per as per drawing and as per direction of engineer. (measurements for payment to be done as per standard drawings). in all type of soil upto 3.0 m depth. 325 external development 326 compacting original ground 327 loosening upto a level of 500 mm below the subgrade level watered, graded and compacted in layers by vibratory roller 8 10 tonne to meet requirement of table 300 2 for subgrade construction as per mort&h specification clause 305.3.4. 328 loosening and recompacting original ground below embankment including loosening leveling and recompacting original ground supporting embankment to facilitate placement of of first layer of embankment, scarified to a depth of 150 mm, mixed with water at omc and then compacted by rolling by vibratory roller 8 10 tonne so as to achieve minimum dry density as given in table 300 2 for embankment construction as per mort&h specification clause 305.3.4. 329 providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (wmm) base course comprising of graded stone aggregate and granular material conforming to mort&h specifications (table 400 ii) in layers of equal compacted thickness each consolidated, including pre mixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub base/ base course and compacting with power vibratory roller to achieve the desired density complete as per mort&h specification clause 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. 330 cement concrete pavements 331 providing and laying lean cement concrete 1:4:8 in sub base over a prepared sub grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600 1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid manualy, compacting with surface vibrator, finishing and curing complete as per clause 601, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. 332 providing and laying un reinforced, dowel jointed, plain cement concrete mix with concrete mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures (if required) as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. pcc m 30. 333 providing and laying cast in situ cement concrete m 20 grade kerb stone channel top and bottom width 115 and 165 mm respectively, 250mm high laid with kerb laying machine, on 150 mm thick pcc m10 grade foundation (laid manually) as per design, including fixing at site as per clause 408 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. using concrete mixer. 334 providing and fixing of 60mm thick precast cement concrete interlocking paver block casted with rubber moulds in approved reflective colour and design having minimun compressive strength of 300 kg/ sq cm. the cc paving blocks be laid on average 50mm thick bed of coarse sand and the joint is to be filled with fine sand. laying procedure on compacted sub base as defined. complete job is to be executed as per the instruction of engineer incharge. the rates to be inclusive of all lead & lifts etc. complete as per specifications. 335 flooring with cobble stone of approx. size 125x125x75 mm (thick) laid on 25 mm average thick cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the stone, laid in approved pattern complete in all respect as per direction of engineer in charge. 336 providing at site, lowering & laying in trenches, aligning & jointing of rcc pipes np4 class (with s/s ends) is: 458 2003 (amended up to date) marked and pipes from 300 mm and upto 1800 mm manufactured through vertical casting process at all depths with rubber gaskets (epdm/sbr) for sewer lines as per is: 5382 (including cost of rubber gaskets, lubricants) as per drawing, sectional hydro testing of the sewer pipe line (including cost and conveyance of water to site for testing) etc., complete as per specification and / or as directed by engineer. note : e/w to be measured and paid separately. 300 mm internal diameter. 337 horticulture work 338 grassing with doobs grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed. in rows 7.5 cm apart in either direction. 339 supply and planting following in poly bags / earthen pots well branched, well established & free from disease of 900 mm min. height plants at site in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required. 340 ficus panda 341 tecoma capensis ( ratanjot) 342 clerodendron inermii ( choti aari) 343 tabernaemontana variegated ( chandni) 344 hamelia patens ( firebush, thal kamal) 345 hibiscus variegated ( guddal) 346 supply and planting following in poly bags / earthen pots well branched, well established & free from disease of 300 mm min. height ground covers at site in 0.3 m dia holes, 0.3 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required. 347 wedelia trilobata ( sunflower family) 348 alternathera green (parrot leaf) 349 iresine herbstii (blood leaf) 350 ophiopogon black ( lily turf, mondograss) 351 asparagus myerii (fox tail) 352 lantana sellowiana 353 rhoeo spathacea compacta‘ ( oyster, boat lily) 354 golden duranta 355 pennisetum setaceum (fountain grass) ...

Urban Improvement Trust - Rajasthan

31789209 tender for swing seesaw jhule, open gym and other development work in nayakhera school ( ward no 29 ) civil work 1 part a boundary wall 2 earth work in excavation by mechanical means ( hydraulic excavator ) / manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan ) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.all kinds of soils 3 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering all work up to plinth level.m10 grade nominal mix 1: 3: 6 ( 1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size ) . 4 random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1 cement : 6 sand ) 5 providing and laying damp proof course with cement concrete grade m 150 ( 1 : 2 : 4 ) mortar prepared with 1% solution of water proof compound completeandno glass strips are used andnot applying 2 coats of hot bitumen complete as per specifications. 50mm thick. 6 providing and laying in position specified grade ofcement concrete forall rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 ( 1 cement: 3 coarse sand ) and making good the joints and cost of plastizers ( if required ) excluding the cost of centering, shuttering and reinforcement.: m20 grade nominal mix 7 providing and laying in position specified grade ofcement concrete for rcc structural elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 ( 1 cement: 3 coarse sand ) and making good the joints and cost of plastizers ( if required ) excluding the cost of centering, shuttering and reinforcementfor beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. : m20 grade nominal mix 8 providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding ( including cost of binding wire ) all complete up to floor three level.: hot rolled deformed bars ( is : 1139 ) . 9 centering and shuttering with plywood or steel plate including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. 10 centering and shuttering with plywood or steel plate including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. : centering & shuttering with plywood or steel plate including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor three level for : columns, pillars, posts and struts etc. 11 centering & shuttering with plywood or steel plate including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor three level for : suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchorblocks, sills, chhajjas, lintel, beam, plinth beam etc. 12 plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick. 13 providing and laying damp proof course with cement concrete grade m 150 ( 1 : 2 : 4 ) mortar prepared with 1% solution of water proof compound completeandno glass strips are used andnot applying 2 coats of hot bitumen complete as per specifications. 50mm thick. 14 painting exterior surface ofwallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect. 15 new work 16 providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats, or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 17 earth work in excavation by mechanical means ( hydraulic excavator ) / manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan ) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.all kinds of soils 18 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering all work up to plinth level.m10 grade nominal mix 1: 3: 6 ( 1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size ) . 19 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering all work up to plinth level. m20 grade nominal mix1: 1.5: 3 ( 1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size ) . 20 flyash brick masonry with flyash bricks of class designation 75infoundation and plinth. cement mortar 1 : 6 ( 1 cement : 6 coarse sand ) 21 plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick. 22 providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth complete 23 random rubble dry stone kharanja under floor. 24 polished blue kota stone flooring skirting, laid over 20 mm thick base of c.m. 1 : 4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : for area of each slab from 901 to 2000 sq.cm :25 mm thick slab. 25 providing and fixing 15 to 20 mm thick granite stone slab mirror polished and machine edge cut in walls, pillars, steps, shelves, sills counters, floors etc. laid on 12 mm ( av. ) thick base of cement mortar 1 : 3 ( 1 cement : 3 coarse sand ) jointing with white cement mortar 1 : 2 ( 1 white cement : 2 marble dust ) with pigment to match the shade of the granite slab complete including rubbing and polishing of : 26 jhunjhunu / jalore ( red / choclate colour ) upto 800 cm2 tiles 27 providing and laying damp proof course with cement concrete grade m 150 ( 1 : 2 : 4 ) mortar prepared with 1% solution of water proof compound completeandno glass strips are used andnot applying 2 coats of hot bitumen complete as per specifications. 50mm thick. 28 providing and fixing flush door shutters non decorative type ( hollow core construction ) with internal frame of 1st grade wood having styles and top rails of 100 mm width & bottom and lock rails of 150 mm width with 3 nos. cross battens of 50 mm thick width using 4 mm thick commercial ply on both faces of shutters & 6 mm thick beading of respective wood using with approved steel fitting as per annexure a : nigeria teak wood grade i 30 mm thick 29 providing and fixing factory made solid core single leaf window shutter made out of composite eco friendly wood laminated with 0.8 mm thick polymer termite and water resistant, fire retendent technology gluing by vaccume lamination technology various premoulded design on both face as per is 2202 ( part 1 & 2 ) 1991. window fitting shall be supplied by the department. 35 mm thick fully panelled 30 with wire gauge 24 gauge 14 mesh of is designation 85 gauge wires of dia 0.56 mm in panels 31 supplying & fixing of door & window chokhats / frames by metallic fastener with jointing arrangement confirming to is:4021 1995 ( ammended 2000 & 2009 ) made out of composite eco friendly wood confirmingto is:1658:2006 with suitable polymer primer termite &water resistive fire technology. 32 providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats, or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 33 painting with synthetic enamel paint of approved brand and manufacture togive an even shade :two or more coats on new work 34 wiring of twin control light / fan / call bell point with 1.5 sq. mm nominal size fr pvc insulated unshethed flexible copper conductor 1.1 kv grade and 1.5 sq. mm nominal size fr pvc insulated unslated unsheathed flexible copper earth conductor 1.1 kv grade ( is:694 ) of approved make in surface / recessed isi marked mms ( is:9537 p iii ) pvc conduit & its accessories, round tles, 18 swg m.s. box with earth terminal, screwless cage connectors for neutral looping in switch board & false ceiling point, 6 a two way switch, 3.0 mm thick isi marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. short point ( up to 3 mtr. ) 35 ( a ) short point ( up to 3mtr ) 36 ( b ) medium point ( up to 6mtr ) 37 ( c ) long point ( up to 10mtr ) 38 wiring of 3 pin 5 amp. light plug point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kg grade ( is:694 ) of approved make in surface / recessed isi marked medium duty pvc conduit & its accessories, hot dipped galvanized m.s modular box with earth terminal, screwless cage connectors for neutral looping in switch board , 6 a modular switch, 6 a modular socket, modular plate with grid plate, screws, making connections, testing etc. as required. on board 39 supplying and drawing fr pvc insulated & unsheathed flexible copper conductor isi marked ( is:694 ) of 1.1 kv grade and approved make in existing surface or recessed conduit / casing capping including making connections etc. as required. 40 2 x 2.5 sq. mm + 1x1.5 sqmm 41 p&f 240 / 415 v ac mcb with positive isolation of breaking capacity not less than 10 ka ( b / c / d tripping characteristic ) isi marked is 8828 ( 1996 ) / conforming to iec 60898 in existing board / sheets including making connections with lugs, testing etc. as required. single pole mcb 42 6a to 32a rating 43 p & f star rated double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq. mm pvc insulated flexible copper conductor making connection testing etc. as required. 44 1200 mm sweep 45 p & f fluorscent tube fitting fabricated from prephosphated and powder coated crca steel and finish with powder coating / stove enamelled paint ) / ( extruded non corrosive uv resist ep channel ) complete with accessories ( low loss copper choke, starter, startes seat ) like electronic choke with terminal block duly prewired with copper conductor including making connection, testing etc. as required, ( without tube ) 46 1 x 36 watts eb 47 p & ffluorscent tube rod in existing fixture as required. 48 36 / 40 watt 49 part c open gym 50 earth work in excavation by mechanical means ( hydraulic excavator ) / manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan ) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.all kinds of soils 51 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering all work up to plinth level.m10 grade nominal mix 1: 3: 6 ( 1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size ) . 52 random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1 cement : 6 sand ) 53 plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish : 20mm thick . 54 providing and laying in position specified grade ofcement concrete forall rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 ( 1 cement: 3 coarse sand ) and making good the joints and cost of plastizers ( if required ) excluding the cost of centering, shuttering and reinforcement.: m20 grade nominal mix 55 centering and shuttering with plywood or steel plate including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. 56 cement concrete pavement of required thickness with ( b ) 1:1.5:3 ( 1 cement:1.5 course sand : 3 graded stone aggregate 20 mm nominal size ) including finishing complete. 57 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering all work up to plinth level. m20 grade nominal mix1: 1.5: 3 ( 1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size ) . 58 providing and laying damp proof course with cement concrete grade m 150 ( 1 : 2 : 4 ) mortar prepared with 1% solution of water proof compound completeandno glass strips are used andnot applying 2 coats of hot bitumen complete as per specifications. 50mm thick. 59 random rubble dry stone kharanja under floor. 60 filling in plinth withlocally available good earth under floors including watering ramming consolidating and dressing complete including cost of locally available good earth 61 painting exterior surface ofwallwith 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect. 62 polished blue kota stone flooring skirting, laid over 20 mm thick base of c.m. 1 : 4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : for area of each slab from 901 to 2000 sq.cm :25 mm thick slab. 63 painting with synthetic enamel paint of approved brand and manufacture togive an even shade :two or more coats on new work 64 supplying and fixing of chain link fencing with angle iron posts 50x50x6mm placed at every 3 mtr. apart 30cm in ground embedded in cement concrete 1:3:6 ( 30x30x45cm ) corner and every tenth post to be strutted with ( 50 x 50 x 6cm ) angle iron provided and fixed and fitted with posts including earth work in excavation etc. complete with chain link size.50mm x 50mm x 3.15mm 65 s / f of following outdoor gym ( fitness ) equipment for park as per enclosed drawing & design in special condition & direction of engineer in charge make india mart or sanhe city guiyuxing sportings goods co., ltd. or arihant or equivalent. 66 double bar:features : h 46, l 66, w 3 4 inch dia. galvanized steel pipe handle 1 / 1.25 inch dia. m.s. pipepowder coated 100 110 microns 67 sit up board:features : h 39, l 46, w 21 4 inch dia. galvanized steel pipe handle 1 / 1.25 inch dia. m.s. pipepowder coated 100 110 microns 68 double surf board:features : h 44, l 310, w 32 4 inch dia. galvanized steel pipe handle 1 / 1.25 inch dia. m.s. pipe powder coated 100 110 microns frp foot rest 69 sky walker:features : h 48, l 51, w 18 4 inch dia. galvanized steel pipe handle 1 / 1.25 inch dia. m.s. pipe powder coated 100 110 microns frp seat & foot rest 70 cross trainer:features : h 53, l 45, w 111 3 inch dia. galvanized steel pipe handle 1 / 1.25 inch dia. m.s. pipe powder coated 100 110 microns frp seat & foot rest 71 shoulder builder triple:features : h 63, l 48, w 36 3 inch dia. galvanized steel pipe handle 1 / 1.25 inch dia. m.s. pipe powder coated 100 110 microns 72 double twister seating :features : h 44, l 71, w 22 4 inch dia. galvanized steel pipe handle 1 / 1.25 inch dia. m.s. pipe powder coated 100 110 microns 73 ches press double:features : h 68, l 55, w 23 4 inch dia. galvanized steel pipe handle 1 / 1.25 inch dia. m.s. pipe powder coated 100 110 microns frp seat & foot rest 74 rower double:features : h 38, l 76, w 27 2x2 inch square crca pipe handle 1 / 1.25 inch dia. m.s. pipe powder coated 100 110 microns frp seat & foot rest 75 peck deck double:features : h 62, l 61, w 3, 2 3 inch dia, galvanized steel pipe handle 1 / 1.25 inch dia. m.s. pipe powder coated 100 110 microns frp seat & foot rest 76 leg press double:features : h 58, l 64, w 17 4 inch dia. galvanized steel pipe handle 1 / 1.25 inch dia. m.s. pipe powder coated 100 110 microns frp seat & foot rest 77 part d : external development 78 construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8 10 tonne to meet requirement of table 300 2 including cost of compensation for earth taken from private land with lead upto 1 km as per morth specification : clause no. 305. 79 double swing : double swing is suitable for 4 to 14 years children and frame is made of nb pipes which should be following specifications :area : 3.0 mtr x 2.50mtr.safe play area : 4.0 mtr x 3.50 mtr.height : 2.40 mtr. ( on ground level ) leg support : 40mm nb pipes top bar : 50mm nb pipe seat : 9mm thick reinforced rubber ( non skid chequired top, bearing : housing special casting heavy duty bail bearing, suspension : 7mm dia electro galvanized chain ( iso : 9001 2000 make ) 80 single see saw : the single see saw suitable for 4 to 8 years children and made of ms pipes which should be following specification : area required : 1.50 mtr.x 3.0 mtr.height : 0.90 mtr. main pipe : 50 nb pipeplank : 40 nb pipehandle : 20 nb pipeseats : ms sheet ( 5mm thick ) frp ( iso : 9001 2000 make ) 81 parallel bars : parallel bars is suitable for 10 to 16 years children and main verticle frame made of 50mm nb pipe and horizontal bars made of 32mm nb pipes. horizontal bars having length 2.10 mtr. and height is 1.20 mtr. on ground level. total area of this parallel is 2.0 mtr. x 1.0 mtr. 82 up and down ladder : providing and fixing of up down ladder made out of ms pipe 40mm, 25mm size of length 10xheight should be less than 6 pipe should be isi marked of heavy weight. 83 wave slide : the sliding chute of wave slide is made of 6mm thick fibre glass reinforced plastic. ( binani or equivalent make ) with a smooth surface consist of 3 sliding mould of 2.00 ft. ( approx ) . the platform made out of 10 gauge ms sheet and shall be supported on 33mm od 14 gauge. the ladder shall be 60cm wide ( approx ) and will be made of 25mm np pipe with 15mm dual steps. the slide shall be supported on three parallel supports of different length. the size of the slide above the ground level shall be as follows platform height 2.40, slide length 4.20m and slide width 0.50 mtr. ( approx ) 84 providing and fixing benches with side panel casted in cast iron single piece and middle part is of mild steel. approx. ht. is 700 mm and length is 1250 mm the carving work is as per enclosed drawing and details and instruction of engineer incharge. 85 supply of different varieties of bougainvillea in ply bags / earthen pot according to height growth and age of plant at site including loading unloading and transportation etc. complete: local variety of bougainvillea 600mm to 900mm 87 lalri / anermi / golden duranta 88 crape myrtal / hemelia / lantana selloviana / lantana yellow / rukmani / gaudichaudi 94 supply and plantation of selected shrubs including mortality replacement, loading unloading transportation and maintenance for 30 days after planting 95 acalypha ceylon 3 4 96 cassia biflora 3 4 97 supply & stacking good earth at site complete including loading, unloading & transportation etc. 98 spreading of manure and good earth in required thickness (cost of manure and good earth to be paid separately) ...

West Central Railway - Rajasthan

31731933 kota division replacement of over aged copper contact wire, cantilever assembly and shifting of ohe on new feeder mast in adee / trd / sgz section.kota division replacement of over aged copper contact wire, cantilever assembly and shifting of ohe on new feeder mast in adee / trd / sgz section., ...

Mohan Lal Sukhadia University - Rajasthan

31667958 miscellaneous work at mds hostel mlsu earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering and ramming and disposal of surplus excavated soil as directed within a lead of 50 mtr. all kind of soils. 2 providing and laying in position cement concrete including curing compaction etc. complete in specified grade excluding the cost of centering and shuttering all work up to plinth level 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size ) 3 filling available excavated earth ( excluding rock ) in trenches plinth side of foundation etc. in layers not exceeding 20 cm in depth consolidation each deposited layer by ramming and watering including lead up to 50 mtrand with all lift. 4 carriage of earth including loading, unloadiing etc lead up to 1 km 5 excavation for road way in soil by mechanical means including cutting and pushing the earth to site of embankment upto distance of 100 mtr. including trimming bottom and side slope in accordance with requirement of lines, grades and corss sections. 6 p & f plain fiber glass sheet ( frp sheet fiber reinforcement product sheet conforming to is: 12866 1989 having minimum thickness as below including fixing with nuts, bolts hooks and bitumen washer etc. complete:3.0 mm thick ( wt. 5.0 kg / mtr.sq ) 7 steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete above plinth level upto 4.5 mtr height.hot finished welded type tubes. 8 providing corrugated g.i. sheet roofing fixed with g.i. j or l hooks bolts and nuts 8mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead and including a coat of approved steel primer and two coat of approved paint on over lapping of sheet complete ( upto a pitch of 60 degree ) & excluding the cost of purlins rafters and truses, for class of sheets. 1.60mm thick 9 random rubble stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1 cement : 6 sand ) 10 plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish:25mm thick 11 plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish:20mm thick 12 dismantling stone rubble masonry including stacking of serviceable material and disposal of unserviceable materialwithin 50 mtr lead.in cement mortar 13 dismantling stone rubble masonry including stacking of serviceable material and disposal of unserviceable material within 50 mtr lead.in cement mortar for thickness of tiles 25mm to 40mm 14 providing and fixing external grade board solid core ( tripple core ) single leaf boiling water and termite resistant flush door shutters isi 2202 67 marked using phenol formaldehyde resin in glue both sides with approved steel fittings complete as per annexurea. decorative teak veneer both sides ( factory fitted ) 35 mm thick 15 p / f ist quality vitrified porcelain polished tiles on floor skirting and steps etc. in different sizes ( thickness to be specified by manufacturer ) with water absorption less than 0.08% and confirming to is:15622 of approved make in all colour and shade, laid with 20mm thick c.m. 1:4 including grouting the joints white cement and matching pigment etc. complete size 600mmx600mm 16 providing and fixing ist quality mat finished ceremic tiles size 400x 400 mm confirming to is: 13755 & is: 15622 colour such as white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete ( including the cost of cement mortar bed 1:4 ) . 17 providing and fixing ist quality standard white / ivory, grey, fuma red brown, light green, light blue and other light shades glazed tiles of ( confirming to is : 13753 & is 13622 ) of size 300 mm x 450 mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete ( excluding the cost of cement plaster on walls & pillars ) . 18 add extra for using coloured dark shade tiles instead of white / ivory / light grey / light green / sky blue / light brown and other ligh shade colours 19 add extra for plaster over item nocement mortar 1:4 20 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :two or more coats on new work including prepration of base with primer putty lippy complete in all respect. 21 brick masonaryin super structureup to third storeywith bricks of classdesignation 75 in cement mortar 1:6 ( 1 cement : 6 coarse sand ) 22 providing and layiny in position specified grade of cement concrete for rcc structure elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 ( 1 cement ; 3 coarse sand ) and making good the joints excluding the cost of centering shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15° , landings, balconies , shelves , chajjas, lintels, bands, plain window, sills , staircases and spiral staircases m20 grade design mix ( with weight batching plant only ) 23 providing and layiny in position specified grade of cement concrete for rcc structure elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 ( 1 cement ; 3 coarse sand ) and making good the joints excluding the cost of centering shuttering and reinforcement for walls ( any thickness ) including attached pilasters buttresses, plinth and string courses fillets columns pillars pearsabutments posts struts etc.m20 grade design mix ( with weight batching plant only ) 24 centering & shuttering with steel plates including strutting , propping, barcing both ways with wooden members and removal of form work up to floor three level for:suspended floors, roofs, landings staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blockessills, chhajjas, lintel, beams etc. 25 providing and fabricating reinforcement for rcc workincluding straightening, cutting, bending, placing in position in binding ( including cost of binding wire ) all complete up to floor three level thermo mechanically treated bars ( conforming to relevant is:1786. ) 26 providing and fixing granite stone slab thickness 16 18 mm mirror polished and machine cut in walls, pillars, steps, shelves, counter, floors etc. laid on 12 mm ( av. ) thick base of cement mortar 1:3 ( 1 cement : 3 coarse sand ) jointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust ) with pigment to match the shade of the granite slab complete including rubbingand polishing of.jhunjhunu / jalore ( red / choclate colour ) above 3601 cm2 slabs 27 extra for providing edge moulding to 16 18 mm thick marble stone counters . vantities etc. over item no. 7.1 & 7.2 including machines polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge. 28 providing & fixing anodized aluminium work ( anodizing to be got done from approved anodizer ) for doors, windows, ventilators and partition with extruded built up standard tubular and other sections of approved make confirming tois : 733 & is: 1285 anodized transperent 81 dyed to required shade according to is:1868 ( minimum anodic coating grade ac 15 ) , fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gap at junctions, at top, bottom and sides with required pvc / neoprene felt etc. aluminium section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, al. tower bolt & al handle & al drop etc. all complete as per architectural drawings and the directions of engineer in charge. ( glazing and paneling to be paid for separately ) .for fixed portions. 29 do for shutters of openable doors, windows and ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required ( lockers shall be paid for separately. ) . 30 do for shutters of openable sliding , windows and making provision for fixing of fittings wherever required ( lockers shall be paid for separately. ) . 31 p&f glazing in aluminium door, window, ventilator, shutters and partitions etc. with p.v.c. / neoprene or gasket etc.complete as per the architectural drawings & the directions of engineer incharge. ( cost of aluminium snap beading shall be paid in basic item ) . with glass panes of 5.0mm thickness ( weight not less than 13.75 kg / sqm ) . 32 providing and fixing 12mm thick prelaminated three layer medium density ( exterior grade ) particle board grade i, type ii conforming to is:12823 bonded formaldehyde synthetic resin of approved brand and manufacture in paneling fixed in alluminium doors, windows, shutters and partition frames with c.p., brass / stainless steel screws etc.complete as per architectural drawings and direction of engineer incharge. prelaminated particle board with decorative lamination on one side and balancing lamination on other side. 33 p&f expanded grill made of anodised aluminium as per design and drawing having members section of 7.5mm x 6.0mm and opening of size 50 mm x 50 mm to aluminium window / vent with required screws, y and h aluminium sec ( as per drawing ) at the ends and middle joints respectively complete in all respect as per direction of engineer incharge 34 s / f fixed wire gaugeofstainless steel of 14 mesh x 24 gauge to the aluminium beading 20x3 mm with suitable screw at not exceeding 150 mm distance at all hight with all lead and lift with scaffolding. 35 p&f brass lock without handle for aluminium door, of approved quality, make & design as directed by engineer in charge. 36 p & f double action hydraulic floor spring of approved brand and manufacture to aluminium door shutter including cost of cutting floors as required embedding in floors and cover plate etc. complete as per directon of engineer in charge confirming to is:6315 make...

Water Resources Department - Rajasthan

31422708 furniture and furnishing work for state water resources informatics centre under national hydrology project rajasthan furniture and furnishing work for state water resources informatics centre under national hydrology project rajasthan , supplying and placing in position of chairman tabledimension: main table ( l ) 2400mm x ( d ) 1200mm x ( h ) 750mm, side storage w2400 x d500 , the table top of 80mm thick shall be supported with a combination of side panel of 70mm thickness. the side table top shall be of 80mm thickness and pedestal of size : l 400mm x d 500mm x h 660mm shall have three drawers. material: the table shall 19 mm plyboard / blockboard with 1mm sun mica for laminationmachine finished with gloss polish. featuring a cherry finish, with delicate panel moulding. . under structure shall be of 19 mm plyboard / blockboard board with 1 mm sun mica with all necessary hardware such as lock & handles & hinges of hettich / hafele certifications: the product shall be from iso 9001:2015, iso 50001:2011, iso 14001, iso 21015:2007 , bifma, fsc, aiota, sedex & greengard certified material ( whichever applicable and if applicable ) and as per the direction of engineer in charge. make: godrej / durian / geeken and equivalent , supplying and placing in position oftabledimension: main table ( l ) 2400mm x ( d ) 1050mm x ( h ) 750mm side storage w2100 x d500the table top of 36 mm thick shall be supported with a combination of side panel of 36 mm thickness. the side table top shall be of 36 mm thickness and pedestal of size: l 400mm x d 500mm x h 660mm shall have three drawers. material:the table shall 19 mm plyboard / blockboard and 1mm sun mica for lamination machine finished with gloss polish. featuring a cherry finish, with delicate panel moulding.. with all necessary hardware such as lock & handles & hinges of hettich / hafele certifications: the product shall be from iso 9001:2015, iso 50001:2011, iso 14001, iso 21015:2007 , bifma, fsc, aiota, sedex & green guardgreengard certifiedmaterial ( whichever applicable and if applicable ) and as per the direction of engineer in charge make: godrej / durian / geeken and equivalent , supplying & placing executive table with credenza unit and pedestal unit dimension:overall size 1800mm x 2100mm x 750mm. the construction of the main table shall be free standing structure constructed with the help of mini fix dowels and pins. the worktop shall have standard / required 19 mm plyboard / blockboard board with 1mm sun micaof size 1800mm x 900mm. the table shall have credenza unit for storage purpose with an overall size 1200mm x 450mm x 650mm. a mobile pedestal shall be provided with an overall size 400mm x 450mm x 650mm. pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. the pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. a pullout keyboard trey shall be provided of standard / required thick 19 mm plyboard / blockboard board with sun mica having size 550mm x 300mm. material: the table shall 19 mm plyboard / blockboard with 1 mm sun mica lamination machine finished shall be used for the tabletop, support, credenza unit and pedestal table. the table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. the top shall be enclosed with wire manager cap for electric provision.the trey shall be operated on sliding channel.the end wall of the table on the side shall be topped by gable end.there shall be buffers provided at the base to avoid scratches on the floor. the drawer shall be handled by ss handle, concealed crank hinge and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation are required. the drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. it shall be mounted on injection moulded nylon castor. certifications: the manufacturer shall have quality and safety assurance like iso 9001:2015, iso 14001:2015 and iso 18001:2007, bifma membership and aiota material certification. the board used should meet international standard of quality, indian standard is 12823 grade ii should meet long time load bending, screw withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per is 2380 whichever applicable and if applicable ) and as per the direction of engineer in charge make: godrej / durian / geeken and equivalent , providing and supplying high back revolving chair with ergonomic design dimension: the seat size shall be 500±10 mm ( d ) x 500±10 mm ( w ) and back size shall be 450±10 mm ( w ) x 760±10 mm ( h ) from seat. overall height shall be = 1190±10 mm, base width / depth = 760±10 mm. material: the seat shall be made of 15mm thick hot pressed commercial plywood upholstered with high resilience moulded polyurethane foam 50mm thick having density 40kg / m³ with fabric tapestry and the back shall be made of two piece injection moulded polypropylene net cover upholstered with breathable mesh tapestry. the base of the seat shall be supplied with pp cover and the backrest shall be made by keeping the natural curvature of the spine and cushion base adjustable lumbar support which helps to provide full back support as well as head support. the chair shall be supplied with black integral 3d adjustable polyurethane arm having sliding, up down, to & fro motion. for seating durability the chair shall have synchro tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. certification: the pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with bifma standard class 3 gas lift to suit them using the lever under the seat. the gas lift mechanism should be tested as per ansi / bifma x5.1 2011 standards. the pedestal should have five legged injection moulded in 30% glass filled nylon having pitch circle dia. 660 mm fitted with 5 nos. twin wheel castors. the castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ansi / bifma standards x5.1 2011 tested 98, 000 cycles with 250lbs load. l ( whichever applicable and if applicable ) and as per the direction of engineer in charge make: godrej / durian / geeken , supplying and placing ergonomically designed, comfortable & aesthetically appealing high back chair dimensions:the seat size shall be 485±10 mm ( w ) x520±10 mm ( d ) and back size shall be 740±10 mm ( h ) from seat & overall height = 1150±10 mm. material: the seat shall be made of 15mm thick hot pressed curved plywood upholstered with high resilience polyurethane foam 50mm thick having density 40kg / m³ withleatherite tapestry 0.8mm thick and 535 gsm and the back shall be supported by metal insert ms crca frame upholstered with high resilience polyurethane foam 12mm thick having density 23kg / m³ withleatherite tapestry 0.8mm thick and 535 gsm with contoured lumbar support which helps to provide full back support and maintain the natural curvature of the spine. headrest shall be provided for comfort of head with leatherite tapestry. the armrest shall be used ms crca chrome plated with pu arm completely joint with seat and back. the chair shall have knee tilt 360 degree revolving mechanism with four position locking and tilt tension adjustment. certifications: the pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 100mm with bifma standard class 3 gaslift to suit them using the lever under the seat. the gas lift mechanism should be tested as per ansi / bifma x5.1 2011 standards. the pedestal shall be made up of ms crca chrome plated having pitch circle dia 650 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movemen with bifma standards. ( whichever applicable and if applicable ) and as per the direction of engineer in charge make: godrej / durian / geeken , supplying and placing ergonomically designed, comfortable & aesthetically appealing high back chairdimensions:the seat size shall be 485±10 mm ( w ) x520±10 mm ( d ) and back size shall be 740±10 mm ( h ) from seat & overall height = 1150±10 mm. material: the seat shall be made of 15mm thick hot pressed curved plywood upholstered with high resilience polyurethane foam 50mm thick having density 40kg / m³ withleatherite tapestry 0.8mm thick and 535 gsm and the back shall be supported by metal insert ms crca frame upholstered with high resilience polyurethane foam 12mm thick having density 23kg / m³ withleatherite tapestry 0.8mm thick and 535 gsm with contoured lumbar support which helps to provide full back support and maintain the natural curvature of the spine. headrest shall be provided for comfort of head with leatherite tapestry. the armrest shall be used ms crca chrome plated with pu arm completely joint with seat and back. the chair shall have knee tilt 360 degree revolving mechanism with four position locking and tilt tension adjustment. certifications: the pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 100mm with bifma standard class 3 gaslift to suit them using the lever under the seat. the gas lift mechanism should be tested as per ansi / bifma x5.1 2011 standards. the pedestal shall be made up of ms crca chrome plated having pitch circle dia 650 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movemen with bifma standards. ( whichever applicable and if applicable ) and as per the direction of engineer in charge make: godrej / durian / geeken , supplying and placing chairdimensions:the seat size shall be 490±10 mm ( d ) x 515±10 mm ( w ) and back size shall be 520±10 mm ( w ) x 530±10 mm ( h ) from seat. overall height shall be = 950±10 mm. material:the seat and back shall be made of double layered ( 15+6 ) mm thick hot pressed commercial plywood padded with high resilience polyurethane foam having density 40kg / m³ in seat and 32kg / m³ in back. the same shall be upholstered with leatherite tapestry 0.8mm thick and 535 gsm. the chair shall be supplied with cushion arm with leatherite mounted on metal pipe frame. the frame structure shall be cantilever support type made up of ms crca chrome plated tubular pipe having cross section area 40mm x 20mm with 2mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. make: godrej / durian / geeken , supplying and placing chairdimensions:the seat size shall be 490±10 mm ( d ) x 515±10 mm ( w ) and back size shall be 520±10 mm ( w ) x 530±10 mm ( h ) from seat. overall height shall be = 950±10 mm. material:the seat and back shall be made of double layered ( 15+6 ) mm thick hot pressed commercial plywood padded with high resilience polyurethane foam having density 40kg / m³ in seat and 32kg / m³ in back. the same shall be upholstered with leatherite tapestry 0.8mm thick and 535 gsm. the chair shall be supplied with cushion arm with leatherite mounted on metal pipe frame. the frame structure shall be cantilever support type made up of ms crca chrome plated tubular pipe having cross section area 40mm x 20mm with 2mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. make: godrej / durian / geeken , supply and fixing conference table 10 seaterdimensions: 2400x1200mm with 25mm thick table top supported on 60x30 rectangular pipe loop material: 19 mm thick plyboard / blockboard ( isi marked ) with 1 mm thick sunmica machine finished, type open desk metal under structure. including 2 nos. aluminium anodized access flap with cable tray for wire management & laminated cable riser or pvc snake for carrying wire from floor. certification: the manufacturer shall have quality and safety assurance likeiso 9001:2015, iso 14001:2015 and iso 18001:2007, bifma membership and aiota certify material.the board used should meet international standard of quality, indian standard is 12823 grade ii should meet long time load bending, screw withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per is 2380. make: godrej / durian / geeken or equivalent , supplying & placing conference table in completely knock down conditionsdimensions: with an overall size 3600mm x 1200mm x 750mm. the construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. the table top shall have the size 1800mm x 1200mm made up of 2 nos. of 19 mm thick plyboard / blockboard ( isi marked ) with 1mm thick sunmica lamination with machine finished with one side laminate and finish as per approved shade. material: the table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge bander machine at 200 0c. the table top shall be supported by plyboard / blockboard ( isi marked ) with 1mm thick sunmica with machine finished gable end. the end wall of the table on the side shall be topped by gable end. the gable end shall have the size 1050mm x 695mm with 38mm thick and 100mm x 695mm with 19mm thick. the gable end shall be made up of plyboard / blockboard ( isi marked ) with 1mm thick sunmica lamination with machine finished with appropriate pvc edge banding and covered both side by aluminium section. the table shall be clad with 18mm thick modesty panel which provide structural support for the desk. the modesty panel shall have an overall size 1200mm x 400mm with 19mm thick plyboard / blockboard ( isi marked ) with 1mm thick sunmica lamination with machine finished connected with both end. there shall be buffers provided to avoid scratches on the floor. the table connections have to be made in such a way that no gap should be seen in between. certification: the manufacturer shall have quality and safety assurance likeiso 9001:2015, iso 14001:2015 and iso 18001:2007, bifma membership and aiota certify material.the board used should meet international standard of quality, indian standard is 12823 grade ii should meet long time load bending, screw withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per is 2380. make: godrej / durian / geeken or equivalent , supplying and placing in position of sliding tile base partition workstation dimensions: size of workstation: l 1200mmx d 600mm x h 750mm with pedestal unit ( size: l 400mm x d 450mm x h 630mm ) . free standing partition height 1167mm and should be minimum of 60 67mm thick. material: the aluminum frame work with powder coating shall be fitted with 8mm thick tiles of approved shade. partition shall have provision for pin up board with fabric & white board of approved shade. partition framework shall have adequate provisions for the movement of electric data cables at desired 1 levels at skirting. the complete partitioning work shall be carried out in front, middle and at both the ends of the seat. tabletop for workstation made up of 25mm thick mdf board of approved shade. side panels should be made from 18mm thick mdf board of approved shade. all working or non working edges shall be provided with machine pressed 2mm thick pvc edging using special hot melt glue at hot temperature. provision of one pvc keyboard tray and cpu trolley for each seating. provision of handles & locking arrangement. certifications: the product shall be from iso 9001:2015, iso 50001:2011, iso 14001, ohsas 18000 , bifma, fsc, aiota, sedex & greenguard certified material whichever applicable and if applicable ) and as per the direction of engineer in charge . make: godrej / durian / geeken or equivalent , supplying and placing personal locker dimensions: personal locker unit with add on units shall be of dimensions of each unit 380mm ( w ) x 450mm ( d ) x 450mm ( h ) . stackability shall have add on units that can be stacked width wise to form bank of lockers having common side panel. locking shall have cam lock with lock lever plus option. material: material shall be crca 0.8 mm thickness. shelf shall be uniformly distributed load capacity per each shelf level is 35 kg maximum. finish shall be epoxy polyester powder coated to the thickness of 50 microns. handle / label holder shall be aesthetically appealing snap fit abs plastic handle. ventilation shall be attractive punched pattern for ventilation. certifications:certified material whichever applicable and if applicable ) and as per the direction of engineer in charge . make: godrej / durian / geeken , providing, supplying and placing steel almirah in perfectly upright and straight position dimensions: the overall size of the almirah shall be 915mm ( w ) x 455mm ( d ) x 1850mm ( h ) . material: the almirah shall be supplied with 2 nos. of glass sliding doors and 2 nos. swing door. the storage shall have 4 nos. of adjustable shelves. the door shall be operated with ppealing snap fit abs plastic handle and concealed crank hinge as well as sliding channel. the glass shall be used 4mm thick. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf shall be made of high yield strength 0.8mm thick and door 1mm thick crca sheet of grade ‘d’ confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40 50? thick. certifications:certified material ( whichever applicable and if applicable ) and as per the direction of engineer in charge make: godrej / durian / geeken or equivalent , supplying & placing three seater benchdimensions: the seat size shall be 440±10 mm ( d ) x 405±10 mm ( h ) from ground. overall height shall be = 775±10 mm, overall depth = 710±10 mm & overall width = 1765±10 mm. material: the seat and back shall be made up of stainless steel sheet of 1.2mm thick, pressed and welded to form the shape. there shall be ppcp shoe provided at the base to avoid scratches on the floor certifications:certified material whichever applicable and if applicable ) and as per the direction of engineer in charge make: godrej / durian / geeken and equivalent , supplying and placing in position of king size bed dimensions ( inch ) : 78 l x 72 w x 16 h, headboard structure dimensions ( inch ) 78 l x 72 w x 48 h, with two side tables of size 18 l x 14 w x 14 h certifications:certified material ( whichever applicable and if applicable ) and as per the direction of engineer in charge material sheesham wood, and velvet upholstery or as per the instruction of engineer in charge , supplying and placing in position of king size beddimensions: size 80.5 l x 38 w x 17 h, headboard dimensions ( inch ) 80.5 lx 38 w x 36 h, finish honey finish, with one side tables of size 18 l x 14 w x 14 h certifications:certified material ( whichever applicable and if applicable ) and as per the direction of engineer in charge material sheesham wood, and velvet upholstery or as per the instruction of engineer in charge. , supplying and placing in position of the double bed mattress dimension 78 l x 72 w, overall thickness 5”, number of layers three layers, thickness of core layer 1 100 mm, material: material of core layer 1 pu bonded foam, quilting both side quilting ( double sided ) , thickness of quilting ( ±2 mm ) 8 mm, fabric composition polyester, construction woven, fabric mass ( minimum ) 80 gm / m2, core layer 1 density 90, compression set for pu foam ( non quilting ) certifications: the product shall be from iso 9001:2015, iso 50001:2011, iso 14001, iso 21015:2007 , bifma, fsc, aiota, sedex & greenguard certified material ( whichever applicable and if applicable ) and as per the direction of engineer in charge make: sleepwell / godrej / kurl on and equivalent , supplying and placing in position of the single bed mattress dimension 78 l x 36 w, overall thickness 5”, number of layers threelayers, thickness of core layer 1 100 mm, material of core layer 1 pu bonded foam, quilting both side quilting ( double sided ) , thickness of quilting ( ±2 mm ) 8 mm, fabric composition polyester, construction woven, fabric mass ( minimum ) 80 gm / m2, core layer 1 density 90, compression set for pu foam ( non quilting ) as per is 7888 1976 ( max ) 10%, certifications :the product shall be from iso 9001:2015, iso 50001:2011, iso 14001, iso 21015:2007 , bifma, fsc, aiota, sedex of certified material ( whichever applicable and if applicable ) and as per the direction of engineer in charge make: sleepwell / godrej / kurl on and equivalent , supplying and placing in position of round coffee table with shelf dimensions:overall assembled dimensions: 30w x 30d x 18.03h, static weight: 50 lbs ( evenly distributed ) , shelf dimensions: 26.77w x 26.77d, item weight: 30.86 lbs, material: constructed of solid sheesham wood, composite and tempered glass. and as per the direction of engineer in charge. certification : material should have all required certificate of materials ( whichever applicable and if applicable ) and as per the direction of engineer in charge , supplying and placing in position wooden almirah with shelfdimension: full height unit 2.5wx 4x 1.5d ( thickness of sides in mm 30mm, height in mm 1350, depth in mm 4510, width in mm 760 ) material: plyboard / blockboard with 1mmsunmica lamination with machine finish and as per the direction of engineer in charge. certification : material should have all required certificate of materials ( whichever applicable and if applicable ) and as per the direction of engineer in charge make: godrej / durian / geeken or equivalent , supplying and placing in position wooden almirah with shelfdimension: full height unit 2.5wx 6hx 1.5d ( thickness of sides in mm 30mm, height in mm 1850, depth in mm 450, width in mm 760 ) material: plyboard / blockboard with 1 mm sunmica lamination with machine finishedand as per the direction of engineer in charge. certification : material should have all required certificate of materials ( whichever applicable and if applicable ) and as per the direction of engineer in charge make: godrej / durian / geeken or equivalent , supplying and placing in position dimensions ( inch ) 31 d x 30 w x 32 h, shape rectangular, features comfortable cushion seats with premium quality foam, armrest yes, seating height 17 inches, material sheesham wood, finish walnut finish, single seater as per the direction of engineer in charge. certification : material should have all required certificate of materials ( whichever applicable and if applicable ) and as per the direction of engineer in charge make: godrej / durian / geeken or equivalent , supplying and placing in position of the one seater sofa dimensions: ( w ) 640mm x ( d ) 732mm x ( h ) 792mm, back height 295mm, seat height 435mm, seat width 560mm is made for sleek and comfortable seating. material: the complete sofa is made with combination of beech wood and ply wood. the sleek wooden frame is machine finished in a rich brown polish with split panel seating. the back and seat are made up of 40mm ( + / 3kg / cubic m ) density having firm cushioning with premium leatherite for better posture. the seat and back is provisioned with 100mm ( + / 5mm ) thickness. made in an option of camel brown or avocado green premium leatherette, this sofa is sleek and comfortable. the sleek frame is finished in a rich brown polish with split panel seating. the back and seat have medium to firm cushioning for better posture. certifications: the product shall be from iso 9001:2015, iso 50001:2011, iso 14001, iso 21015:2007 , bifma, fsc, aiota, sedex & greenguard certified material ( whichever applicable and if applicable ) and as per the direction of engineer in charge make: godrej / durian / geeken or equivalent , supplying and placing in position of the one seater sofadimensions: ( w ) 1260mm x ( d ) 732mm x ( h ) 792mm, back height 295mm, seat height 435mm, seat width 1060mm is made for sleek and comfortable seating. material: the complete sofa is made with combination of beech wood and ply wood. the sleek wooden frame is machinefinished in a rich brown polish with split panel seating. the back and seat are made up of 40mm ( + / 3kg / cubic m ) density having firm cushioning with premium leatherite for better posture. the seat and back is provisioned with 100mm ( + / 5mm ) thickness. made in an option of camel brown or avocado green premium leatherette, this sofa is sleek and comfortable. the sleek frame is finished in a rich brown polish with split panel seating. the back and seat have medium to firm cushioning for better posture. certifications: the product shall be from iso 9001:2015, iso 50001:2011, iso 14001, iso 21015:2007 , bifma, fsc, aiota, sedex & greenguard certified material ( whichever applicable and if applicable ) as per the direction of engineer in charge make: godrej / durian / geeken or equivalent , supplying and placing in position of the one seater sofa dimensions: ( w ) 1800mm x ( d ) 732mm x ( h ) 792mm, back height 295mm, seat height 435mm, seat width 1600mm is made for sleek and comfortable seating. material: the complete sofa is made with combination of beech wood and ply wood. the sleek wooden frame is finished in a rich brown polish with split panel seating. the back and seat are made up of 40mm ( + / 3kg / cubic m ) density having firm cushioning with premium leatherite for better posture. the seat and back is provisioned with 100mm ( + / 5mm ) thickness. made in an option of camel brown or avocado green premium leatherette, this sofa is sleek and comfortable. the sleek frame is finished in a rich brown polish with split panel seating. the back and seat have medium to firm cushioning for better posture. certifications: the product shall be from iso 9001:2015, iso 50001:2011, iso 14001, iso 21015:2007 , bifma, fsc, aiota, sedex & greenguard certified materials ( whichever applicable and if applicable ) and as per the direction of engineer in charge make: godrej / durian / geeken or equivalent , supplying and placing two seater sofadimensions: the seat size shall be 535±10 mm ( d ) x 1030±50 mm ( w ) , seat height = 435±10 mm, overall width = 1200±50 mm, overall depth = 990±10 mm & overall height = 825±10 mm. material: that shall be constructed from natural hard wood and commercial plywood having inner frame.the sofa shall have spring attached and also be padded separately. the frame shall be padded with high resilience polyurethane foam having density 40kg / m³ in seat and 32kg / m³ in back. there shall be cushion arm provided padded with high resilience polyurethane foam having density 40kg / m³. the base of the arm shall have ss 202 grade frame having cross section area 70mm x 10mm. the structure shall be upholstered with leatherite tapestry 1±0.2 mm thick and 535 gsm. the understructure shall consist of ss loop leg having cross section area 70mm x 10mm. there shall be shoe provided at the bottom to avoid scratches on the floor. certification: the product shall be from iso 9001:2015, iso 50001:2011, iso 14001, iso 21015:2007 , bifma, fsc, aiota, sedex & greenguard certified materials ( whichever applicable and if applicable ) and as per the direction of engineer in charge make: godrej / durian / geeken , supplying and placing three seater sofadimensions: the seat size shall be 535±10 mm ( d ) x 1630±10 mm ( w ) , seat height = 435±10 mm, overall width = 1805±10 mm, overall depth = 990±10 mm & overall height = 825±10 mm. material: that shall be constructed from natural hard wood and commercial plywood having inner frame.the sofa shall have spring attached and also be padded separately. the frame shall be padded with high resilience polyurethane foam having density 40kg / m³ in seat and 32kg / m³ in back. there shall be cushion arm provided padded with high resilience polyurethane foam having density 40kg / m³. the base of the arm shall have ss 202 grade frame having cross section area 70mm x 10mm. the structure shall be upholstered with leatherite tapestry 1±0.2 mm thick and 535 gsm. the understructure shall consist of ss loop leg having cross section area 70mm x 10mm. there shall be shoe provided at the bottom to avoid scratches on the floor and as per direction of engineer in charge. certification: the product shall be from iso 9001:2015, iso 50001:2011, iso 14001, iso 21015:2007 , bifma, fsc, aiota, sedex & greenguard certified materials ( whichever applicable and if applicable ) and as per the direction of engineer in charge make: godrej / durian / geeken and equivalent , supplying and placing centre table material sheesham wood, finish walnut machinefinish, dimensions ( inch ) dimension: 30 l x 22 w x 15 h, storage no, features strong and durable table frame made from solid wood, table height 15 inches, certification: the product shall be from iso 9001:2015, iso 50001:2011, iso 14001, iso 21015:2007 , bifma, fsc, aiota, sedex & greenguard certified materials ( whichever applicable and if applicable ) and as per the direction of engineer in charge make: godrej / durian / geeken and equivalent , supplying and placing dining table set with 4 chairsdimension: dining table with 4 chairs, shape of table square, seating capacity 4, length 4 , width 4, height 2.5 mm, thickness of top in mm ( + / 5% ) 18 mm, shape and dimension of base 4 legs, number of vertical support 4, inclusive 4 chairs, 18 l x 18 w x 34 h, material: material of top sheesham wood, with machine finished certification: product having bifma certification no, oem of offered product is iso 9001:2015 certified yes, oem of offered product is iso 14001:2015 certified yes, oem of offered product is iso 18001:2007 certified yes and others certified documents certified materials ( whichever applicable and if applicable ) and as per the direction of engineer in charge make: godrej / durian / geeken and equivalent , supply and fixing in position televisionfeatures:display size 108 cm ( 43 inch ) , screen type led, hd technology & resolution ultra hd ( 4k ) , 3840 x 2160, smart tv yes, notion sensor no, hdmi port 3, usb port 2, wi fi type wifi certified 802.11a / b / g / n / ac, built in wi fi yes, wall mount included yes, led display type edge led, aspect ratio 16:09, refresh rate 50 hz, supported video formats avi, asf, mp4, mkv, webm, ps, ts, other video features hdr10, hlg, dolby vision, motion flow xr 800, number of speaker 2, speaker type down firing, sound technology clear phase, s master digital amplifier, dolby audio, speaker output rms 20 w, supported audio formats dolby audio, processor 4k processor x1, operating system android, screen mirroring yes, app store type google play store, wireless lan adapter yes, bluetooth yes, teletext yes ethernet ( rj45 ) 1, smart remote yes, rf capable yes, internet access yes, operating distance 0.91 m, power requirement ac 100 240 v, power consumption 96 w and 0.5 w ( standby ) , dimensions: width x height x depth ( without stand ) 97.1 cm x 57.5 cm x 7.7 cm, accesories: ( general ) in the box 1 tv unit, warranty card, remote control, table top stand, user manual, 2 batteries, warranty 1 year manufacturer warranty on product, make: sony / philips / lg / samsung. , supply of single doorrefridgerator supply of single door refrigerator having storage volume capacity 45 52 liters, certifications: conformity to indian standard is:1476 latest for direct cool, type of door single, insulation puff, method of defrosting direct cool, bee star rating as on date ( central ministries / departments while procuring shall ensure that the items carry 4 star or higher star rating of bee ) 2, material: coil material copper ( cu ) , type of finish metallic, color white, isi marked yes, method of defrosting direct cool, eco friendly refrigerant yes, compressor power saver compressor, voltage range at 43 degree centigrade ( volts ) 230 ( tolerance 10% ) , make:lg / samsung / kelvinator / blue star / godrej / hair , supplying and placing in position double door refrigerator supplying and placing in position double door refrigerator, conformity to indian standard is:15750 ( 2006 ) for frost free, storage volume ( net capacity ) ( liters ) 250, type of door double, insulation puff, method of defrosting frost free, bee star rating as on date ( central ministries / departments while procuring shall ensure that the items carry 4 star or higher star rating of bee ) 3, coil material copper ( cu ) , type of finish metallic, color silver, isi marked yes, cml no. 0, built in voltage stabilizer yes, eco friendly refrigerant yes, compressor power saver compressor, voltage range at 43 degree centigrade ( volts ) 230 ( tolerance 10% ) , make lg / samsung / godrej / wirlpool / kelvinator , supplying and placing in position double door refrigerator supplying and placing in position double door refrigerator, conformity to indian standard is:15750 ( 2006 ) for frost free, storage volume ( net capacity ) ( liters ) 650, type of door double, insulation puff, method of defrosting frost free, bee star rating as on date ( central ministries / departments while procuring shall ensure that the items carry 4 star or higher star rating of bee ) 3, coil material copper ( cu ) , type of finish metallic, color silver, isi marked yes, cml no. 0, built in voltage stabilizer yes, eco friendly refrigerant yes, compressor power saver compressor, voltage range at 43 degree centigrade ( volts ) 230 ( tolerance 10% ) , make lg / samsung / godrej / wirlpool / kelvinator. , supply and installation at place ro system supply and installation at place ro system, operation fully automatic with auto cut off, ultraviolet ( uv ) lamp, filtration capacity in liter / hour 20, provision of arsenic removal, fluoride removal, chloride removal, storage tank stainless steel, storage tank capacity ( storage tank external for higher capacity if required to be arranged by buyer ) 8 ltr, buyer / consignee, pipe & fitting from out let to purified water tank to be arranged by buyer / consignee, electrical fitting and plug points to be arranged by buyer / consignee, scope civil work if any required during installation all civil work shall be, make: kent / eureka forbes / blue star , supply and installation at place water collersupply and installation at place water coller, cooling capacity liters / hour 150 liters / hour, storage capacity 150 liter, type storage, maximum energy consumption ( watt ) 1550 watt for 150 ltr / hr cooling cap., power factor 1, conformity to indian standard is: 1475 latest, isi marked yes, cm / l no and date 7200036798, eco friendly ( non cfc refrigerant ) , water tank sheet material and thickness stainless steel ( grade aisi 304 ) with puf insulation, thickness > =0.6 mm, water tank cover and lid bottom sheet material al. sheet, water tank cover and lid bottom sheet thickness 1.5 millimeter, cooler cabinet sheet material stainless steel ( grade aisi 304 ) , cooler cabinet sheet thickness 0.8 millimeter, warranty on machine 1 year, warranty on compressor 1 year, make: blue star / godrej / kelvinator , supply and installation of chimney supply and installation of chimney, material: material of blower body plastic ( pp ) fire retardant, material of blower blade– plastic, material of exhaust pipe– pvc, filter material stainless steel, shape t shaped, filter type mesh filter, control panel type push button, mount type wall mount, wattage of led ( in watt ) 3, finishing polished, exhaust / flexible pipe ( 3 meter ) no, chimney air suction capacity ( cmh ) 1000, thickness of body ( mm ) 0.6, chimney height ( cm ) 115, chimney depth ( cm ) 50, chimney width ( cm ) 60, section area length ( cm ) 40, section area width ( cm ) 50, exhaust length ( mm ) 120, exhaust width ( mm ) 150, flexible pipe diameter ( mm ) 125, unit warranty ( years ) 1, blower motor warranty ( years ) , material of blower body plastic ( pp ) fire retardant, material of blower blade plastic, material of exhaust pipe pvc, filter material stainless steel, shape t shaped, filter type mesh filter, control panel type push button, mount type wall mount, in built light yes, light type led, wattage of led ( in watt ) 3, finishing polished, exhaust / flexible pipe ( 3 meter ) no, dimension, chimney air suction capacity ( cmh ) 1000, thickness of body ( mm ) 0.6, chimney height ( cm ) 115, chimney depth ( cm ) 50, chimney width ( cm ) 60, section area length ( cm ) 40, section area width ( cm ) 50, exhaust length ( mm ) 120, exhaust width ( mm ) 150, flexible pipe diameter ( mm ) 125, unit warranty ( years ) 1, blower motor warranty ( years ) 5, make: glen / kaff / faber / elica , supply of room heater oil typesupply of room heater oil type, product dimensions?: ? 59 x 16 x 71 cm; 11.5 kilograms, quick heating oil filled room heater with wide coverage, adjustable temperature control, noiseless operation, easy storage & advanced safety features, saves energy. , supply of fan room heatersupply of fan room heater, features: heating element wattage ( watt ) 2900, no. of heat settings 1, room heater certifications: conformity to is: 302 2 30: 2007 latest, isi marked, material: materials of reflector for radiant / tubular heater steel, corrosion resistant yes, angle adjustment yes, dimension of room heater ( l x b x h ) ( mm x mm x mm ) 650x203x196, weight of room heater ( kg ) 2.6, thermal cutoff safety device available, air delivery ( cubic meter / hour ) 120, operating voltage 230 volt ( + / 10% ) 50 hz, light indicator yes, availability of test reports from central govt. / nabl / ilac accredited lab covering all the declared parameters as per is specification yes, make: morphy richards / havells / usha , supply of water kettle of capacity 1 litersupply of water kettle of capacity 1 liter, material of kettle stainless steel, rated input ( kw ) 0.5, time to boil one liter of water ( minutes ) 1, minimum quantity of water that can be boiled ( ml ) 200, with thermostat, , indian standard for electric kettle conforming to is : 367 / 1993 latest, bis marking, cml no. 48058, material of kettle stainless steel, operating voltage ( volt ) 230+ / 10%, make: philips / borosil / havells / usha , supply and laying of wallpaper supply and laying of wallpaper with standard and required workmenship of size 0.53x10m colour decided by engineer in charge. , providing & fixing of ward robe shutters made out of 19mm thick bwp block board isi of superior quality make. front side finishing with 4mm thick teak veneer approved make and 0.8mm thick approved shade mica in the inner side. covering with teak wood beading 25x12mm all the sides of shutter & 35x12mm on outer frame for making good the wall joint including heavy brass s.s. fittings ( handle 200mm 2 nos., tower bolt 150mm 2 nos., brass lock 1 nos., magnetic catcher 2 nos., brass hinges 75x40x2.5 mm 6 nos., ss hanger rod 20mm dia ) complete with melamine polishing as per drawing and design approved by engineer in charge , providing & fixing mica of approved make for inner / outer side of shutters with fevicol & nails complete as per approved by engineer in charge.0.8mm thick , providing & fixing decorative veneer of approved make for inner / outer side of shutters with fevicol & nails complete as per approved by engineer in charge. 4 mm thick , providing and fixing almirah lock ( 50 to 70 mm size ) of approved make without pair of handles for door with necessary screws etc complete as per direction of engineer in charge. , providing and fixing of wall paneling on grid made out of pvc profile section of size 21x17mm with a wall thickness of 1.5mm+ / 0.2mm, fixed on the existing wall with wood screw of size 50mm x 8mm with rowel plug at a spacing of 900mm center.upvc profile section of size 150mm x 10mm with a wall thickness of 1.0mm+ / 0.2mm to be fixed on the grid by self tapping screw of size 19mm x 6mm.necessary cutouts for electrical connection to be provided at required places. the edge and periphery, finally to be covered by extruded pvc beading section of size 28mm x 12mm with a wall thickness of 1.0mm+ / 0.2mm complete as per manufacture’s specification and direction of engineer in charge. , sitc of air cooled split type air conditioners complete with indoor unit ( idu ) , out door unit ( odu ) , surface / concealed copper refrigerant piping with insulation ( ep foampipe section ) upto 3 mtr ( idu to odu ) , copper power cable upto 4 mtr ( idu to odu ) , r 22 / r 410 refrigerant, remote, suitable for 400 / 230v +10% of 50 hz , 1 / 3 phaseacsupply capable of performing cooling, dehumidification, air circulation of following capacity with scroll / reciprocating / rotary compressor as specified. gr1, invertor type, 1.5 tr with 3 star rating of bee ( iseer not less then 3.7 ) , ….................do…..................................................................................2.0 tr with 3 star rating of bee ( iseer not less then 3.7 ) ...

Government Medical College - Rajasthan

31419867 supply of furniture supply of furniture , specifications of chairs 1. frame : cantilever type tubular frame made up of coasted steel,diameter mini 1 inch x 14 bg 2. arm rest: stable arm rest on both side, weather and scratch resistant 3. seat : mini 1.2 cm thick plywood upholstered with w ith fabric and moulded polyurethane foam 4. back : mini 1.2 cm thick plywood upholstered with fabric and moulded polyurethane 5. back foam is designed with contoured lumbar support for extra comfort 6. back size 48.0cm. (w) x 47.0cm (h) , specifications of u shape table 1. suitable for round table discussion 2. should be u shaped 3. open limb for interacting with audience 4. inside space should be sufficient for movement fo teacher/trainer 5. should be made up of laminated mdf 6. top should be water resistant and mini 20 mm thick 7. should have provision for leg rest for audience with space for inside chair movement 8. height 30 inch, width 24 inch 9. lenth – total 60 feet ( 10 feet semicircle table. 25 feet each limb) 10. may be supplied in pieces, and may be assembled during installation 11. termite resistant coating 12. provision for warranty , specifications of podium 1. made up of laminated mdf 2. dimensions 25 inchx 18inch x48 inch 3. should have 2 doorcabinets with lock 4. should have a top sliding mechanism 5. provision for keeping laptop and mike 6. provision for electric connections of laptop and mike 7. choice of color should be available 8. termite resistant coating 9. provision for warranty , specifications of almirah 1. made up of laminated termite resistant mdf 2. dimension : 60 inch height. 36 inch width and 18 inch depth 3. side wall and back minimum 18 mm thick with door minimum 12 mm thick 4. should have at least 3 inch stand 5. should have 2 doors with lock facility 6. should have 4 height adjustable compartments 7. base should be stationary 8. provision for warranty...

Indian Army - Rajasthan

31366498 bids are invited for aluminium ladder , equal aluminium , ladder , hammer , hammerwith handle , claw , claw hammer , flat screw , flat driver , screw , screw d , black , black tip , pipe , pipe wrench , lenght350 , pipe450mm , pipewrench , waterpump , side cutting , combination plier , flat , flatchisel , flatchisel235mm , cantilever , steel spade , sledgehammer, sprit level , digital , digital plastic , hacksaw , blades , b ,wcb6 , wcb10 , wcb25 , angle , drill , measuring , tapesfiber , glass leatherette , ratchet , microfiber , industrial ,hand powered , cobler princer total quantity : 220...

Water Resources Department - Rajasthan

31357862 procurement of furniture for spmu drip, jaipur procurement of furniture for spmu drip, jaipur , table type 2 ( no of storage unit double storage, storage provided both side, length of table top 2100 mm, height of table top 750mm, depth of table top 1100 mm, table top material wooden with plywood and thicknes 25 mm, inclusive of all taxes) , table type 3 ( storage provided one side, depth of 600 mm, height of table top 750mm, length of table top 1200 mm,table top material wooden with plywood and thicknes 25 mm, inclusive of all taxes) , chair type 2 { castors without, type of seat and backrest seat made of padded with polyurethane foam and backrest made of mesh, chair type with arms, frame type cantilever (inclusive of all taxes)} , chair type 3 { frame type cantilever, type of seat and backrest padded with polyurethane foam, castors without (inclusive of all taxes)} , chair type 6 { plastic material filled thermoplastic, arms without, seat cushion without (inclusive of all taxes)} , chair type 4 {chair type with arms,frame type 4 legs,castors without (inclusive of all taxes)} , steel almirah height 2000 mm without pedestal, depth 480 mm, width 910mm with 4 shelves (inclusive of all taxes)}. , steel almirah {( height in mm – 1200 without pedestal, depth in mm 430, width in mm 760 with 3 selves) (inclusive of all taxes)}. , computer table consists of computer table with key board drawer and table top (size of computer table(lxbxh) 1000 mm x 600 mm x 750 mm (inclusive of all taxes) , record rack with glass opening (height (without pedestal 1855 mm, width 910 millimeter, depth 455 millimeter) , metal shelving side racks with 2 shelves (depth 380 mm, width 915, height 975)...

Rajasthan Housing Board - Rajasthan

31356453 yearly rate contract rate for year 2022 2023 all sectors pratap nagar, sanganer, jaipur item 2 earth work in excavation by mechanical means (hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and all lift , disposed earth to be levelled and neatly dressed: all kinds of soil 810.00 cum 137.00 rs. one hundered thirty seven only 110970.00 2 earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils 500.00 cum 139.00 rs. one hundered thirty nine only 69500.00 earth, sand, lime, morrum manure or sludge for 20 km. 810.00 cum 83.60 rs. eightythree and paisa sixty only 67716.00 4 filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. 810.00 cum 66.00 rs. sixtysix only 53460.00 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 500.00 cum 2429.00 rs. two thousand four hundred twentynine only 1214500.00 6 m15 grade nominal mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). 115.00 cum 3265.00 rs. three thousand two hundred sixtyfive only 375475.00 7 providing and laying in position specified grade of cement concrete for all rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. m20 grade nominal mix / design mix 100.00 cum 3811.00 rs. three thousand eignt hundred eleven only 381100.00 add extra for providing richer mixes respectively at all floor levels providing m 25 grade concrete by using min 410 kg of cement per cum instead of m 20 grade design mix. 40.00 cum 57.00 rs. fiftyseven only 2280.00 providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo mechanically treated bars (conforming of relevent is code) 9500.00 kg. 64.00 rs. sixtyfour only 608000.00 10 centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. 100.00 sqm. 116.00 rs. one hundred sixteen only 11600.00 centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : walls (any thickness) including attached pilasters, buttresses plinth and string course. 200.00 sqm 214.00 rs. two hundred forteen only 42800.00 12 suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. 400.00 sqm 248.00 rs. two hundred fortyeignt only 99200.00 brick work with f.p.s. bricks of class designation 75 in superstructure above plinth level upto floor v level in all shapes and sizes in : cement mortar 1 : 6 (1 cement : 6 coarse sand) 330.00 cum. 3236.00 rs. three thousand two hundred thirtysix only 1067880.00 add extra for square or rectangular pillars in superstructre brick work up to five storey upto 45 cm length and two corners are free 35.00 cum 133.00 rs. one hundred thirtythree only 4655.00 half brick masonry in foundation & plinth using bricks of designation 75 cement mortar 1 : 6 (1 cement : 6 coarse sand) 450.00 sqm. 350.00 rs. three hundred fifty only 157500.00 random rubble stone masonryr with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in: cement mortar 1:4 ( 1 cement : 4 sand). 275.00 cum. 2386.00 rs. two thousand three hundred eightysix only 656150.00 rajasthan housing board , jaipur name of work : yearly rate contract rate for year 2022 2023 place of work : all sectors pratap nagar, sanganer, jaipur g schedule 3 5 8 9 11 13 14 15 16 page 1 of 7 17 cement mortar 1:6 ( 1 cement : 6 sand). 450.00 cum. 2148.00 rs. two thousand one hundred fortyeignt only 966600.00 18 wall upto 30cm. and less thickness. 500.00 cum 144.00 rs. one hundred fortyfour only 72000.00 19 providing and laying coping with cement concrete grade m 15 (1 : 2 : 4) mortar complete with scaffolding,shuttering, glass strip at 1m interval finishing of surface with cm 1:3, rounding of edges fine finishing as per specification 50mm thick.. 500.00 sqm 300.00 rs. three hundred only 150000.00 providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to is : 13753 & is :15622 in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 200 x 300mm 75.00 sqm 535.00 rs. five hundred thirtyfive only 40125.00 21 300 x 450mm 75.00 sqm 803.00 rs. eignt hundred three only 60225.00 22 providing and fixing 1st quality mat finished ceremic tile size 300x300mm confirming to is : 13755 and is : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 150.00 sqm 604.00 rs. six hundred four only 90600.00 23 extra for using size above 300x300mm in glazed tiles and for using 400mm x 400mm mat finished tiles in place of 300mm x 300mm size. 80.00 sqm 60.40 rs. sixty and paisa forty only 4832.00 p & f 1st quality soluble salt vitrified polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufacture) with water absorption less than 0.08% and conforming to is 15622 of approved make in all color and shade, laid with 20 mm thick cm 1 : 4 including grouting the joints with white cement and matching pigment etc complete. size 600 mm x 600 mm 80.00 sqm 945.00 rs. nine hundred fortyfive only 75600.00 providing and fixing external grade board solid core single leaf flush door shutters isi 2202 67 marked using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure a : 30 mm thick . commercial veneer both side 180.00 sqm 1338.00 rs. one thousand three hundred thirtyeignt only 240840.00 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm thick nominal size aggregate. 250.00 sqm 211.00 rs. two hundred eleven only 52750.00 27 75mm thick with 20mm thick nominal size aggregate. 450.00 sqm 334.00 rs. three hundred thirtyfour only 150300.00 kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm 50.00 sqm 825.00 rs. eignt hundred twentyfive only 41250.00 plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20mm thick . 18000.00 sqm 123.00 rs. one hundred twentythree only 2214000.00 plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick. 10000.00 sqm 107.00 rs. one hundred seven only 1070000.00 31 extra for providing and fixing chicken mesh with plaster at joints of rcc and masonary complete fixing of mesh with nails including cost of mesh ,nails etc. 200.00 sqm 40.00 rs. forty only 8000.00 32 providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete 1000.00 sqm 86.00 rs. eightysix only 86000.00 33 providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete 1000.00 sqm 62.00 rs. sixtytwo only 62000.00 finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding: new work (two or more coats applied @ 3.84 kg/10 sqm). 3000.00 sqm 41.00 rs. fortyone only 123000.00 painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work 105.00 sqm 46.00 rs. fortysix only 4830.00 25 20 24 26 28 29 30 34 35 page 2 of 7 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: new work (two or more coats) over and including scrapping and priming coat with cement primer. 1300.00 sqm 59.00 rs. fiftynine only 76700.00 old work (one or more coats) including scrapping surface and necessary repairs. same colour 8300.00 sqm 29.00 rs. twentynine only 240700.00 painting exterior surface of wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect. new work 150.00 sqm 89.00 rs. eightynine only 13350.00 39 old work 2700.00 sqm 62.00 rs. sixtytwo only 167400.00 40 demolishing r.c.c. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge. 50.00 cum 757.00 rs. seven hundred fiftyseven only 37850.00 demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge: in cement mortar. 250.00 cum 523.00 rs. five hundred twentythree only 130750.00 renewing glass panes, with putty and nails wherever necessary: float glass panes of thickness 5.0 mm 300.00 sqm 553.00 rs. five hundred fiftythree only 165900.00 providing and laying water proofing treatment over the existing r.c.c. roof as directed by engineer in charge and consisting of : (i) cleaning and washing of the existing roof including removing of loose material from the surface of cracks. (ii) widening and deepening of cracks to receive the terro crack filler or equivalent in two coats. (iii) application of one coat of terro seal or equivalent compound. (iv) application of one base coat of water puoofing compound and then application of net (made up of nylon and plastic of approved brand and desired thichness) and again application of two base coats of water proofing compound over the net. the three layers of approved water proofing material will be mixed with kerosene in proportion of 5 kg (water proofing material): 1 liter (kerosene) ratio and will be applied like gurmala plaster. (v) application of three or more coats of water repellent compound like terro seal or equivalent compound with soft brushes complete in all respect as per direction of engineer in charge. 3000.00 sqm 570.00 rs. five hundred seventy only 1710000.00 44 providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proffing cement compound @ 0.253 kg/sqm. b) laying second layer of fiber glass cloth when the first layer is still green . overlaps of joints of fiber cloth should not be less than 10 cm . c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. this will be allowed to air cure for 4 hours followed by water curing for 48 hours. the entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around d) fourth and final layer of brick tiling ‘with cement mortar or any other approved protective coarse. (which will be paid for separately) for the purpose of measurement the entire treated surface will be measured 500.00 sqm. 275.00 rs. two hundred seventyfive only 137500.00 45 120cm. high fencing with angle iron posts 50x50x6mm. placed at every 3 mtr. apart 30cm. in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner & every tenth posts to be strutted with 50x50x6mm angle iron provided with three horizontal lines and two diagonals of black barbed wire between two posts fitted and fixed with g.i. staple including earth work in excavation etc. complete. 400.00 mtr. 419.00 rs. four hundred nineteen only 167600.00 dismantling of fencing dismantling of barbed wire fencing / wire mesh fencing including posts, foundation concrete, backfilling of pit by manual means including disposal of 200.00 rmtr. 32.00 rs. thirtytwo only 6400.00 47 patch repair to cement concrete floor including digging out old floor in regular shape and removal of rubbish curing etc. complete in all respects. 250.00 sqm 211.00 rs. two hundred eleven only 52750.00 48 washing floor with soda, soap or other cleaning material. 10000.00 sqm 1.00 rs. one only 10000.00 grinding of existing floor with 120 and 360 no. carborundum stone including cost of wax polishing complete : 900.00 sqm 33.00 rs. thirtythree only 29700.00 50 repair of existing steel glazed doors, windows and ventilator, ms sheet door, garge doors, compound wall gates etc. by welding drilling complete include. cost of welding rods and hire charge of welding meachine and tp etc complete 150.00 sqm. 239.00 rs. two hundred thirtynine only 35850.00 43 36 37 38 41 42 46 49 page 3 of 7 51 labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. 450.00 sqm. 160.00 rs. one hundred sixty only 72000.00 52 cleaning and dusting of floor, roof etc. with approved cleaning material including disposal of unserviceable material / rubbish with all lead and lift after social function in community centres . 150.00 per function 889.00 rs. eignt hundred eightynine only 133350.00 53 annual maintenance of fire extinguisher dry chemical powder type 5 kg. capacity 20.00 each 550.00 rs. five hundred fifty only 11000.00 54 cleaning of building, bath, toilets, man hole, sewer line, drains, chambers etc. by sweeper including all cleaning articals.(community centres/office buiding) 10.00 month 6000.00 rs. six thousand only 60000.00 55 labour charges for checking & cleaning sewer pipe line upto 200 mm dia.including removal & transportation of sludge as directed by engineer incharge 1000.00 rmtr. 4.00 rs. four only 4000.00 labour charges for cleaning for internal man hole/chamber complete chamber 50.00 each 30.00 rs. thirty only 1500.00 57 manhole 50.00 each 50.00 rs. fifty only 2500.00 58 labour charges for checking & cleaning sewer pipe line upto 200 mm dia.including removal & transportation of sludge as directed by engineer incharge 10000.00 rmtr. 4.00 rs. four only 40000.00 providing and fixing unplasticized poly vinyl chloride (upvc) swr pipes type b for sciland waste discharge system (is:13592 : 1992 marked) of approved quality /make 75 mm dia 50.00 mtr. 116.00 rs. one hundred sixteen only 5800.00 60 110 mm dia 200.00 mtr. 219.00 rs. two hundred nineteen only 43800.00 61 160mm dia 25.00 mtr. 289.00 rs. two hundred eightynine only 7225.00 62 providing and fixing flex hoarding 10 oz flex sheet duly printing, letter writing, designing, iron sheet framing with wooden structure & angles for supporting of 35x35x5mm with erecting on temporay ballis post as per requirment of site duly approved by engineer incharge, including fitting at site. 2500.00 per sq. ft 90.00 rs. ninety only 225000.00 63 barricating with sal ballies as per design including tying with vertical post by coconut strings including digging out holes in all types of soil complete in all respect with two horizontal members height 1.2 m up to 1.5 m above ground level and vertical supports up to 2.5 centreand upto 3 days period including removal and cleaning the site complete in all respect & including dressing of sides in all types of soil. 500.00 mt 16.50 rs. sixteen and paisa fifty only 8250.00 64 providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 3000.00 kg. 77.00 rs. seventyseven only 231000.00 65 extra if square,rectangular hollow tubelar sections are used or grill made by flats only 3000.00 kg. 7.00 rs. seven only 21000.00 66 surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr. and lift up to 1.5 mtr.: all kinds of soil 10000.00 sqm 7.00 rs. seven only 70000.00 67 clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 25000.00 sqm 4.00 rs. four only 100000.00 clearing grass and removal of rubbish clearing grass and removal of rubbish up to a distance of 30 m outside the periphery of the area as per technical specification clause 201. 5.00 hectare 9054.00 rs. nine thousand fiftyfour only 45270.00 construction of embankment with material obtained from borrow pits construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 mtr as per technical specification clause 301.5 500.00 cum 99.00 rs. ninetynine only 49500.00 excavation in cutting in soil by manual means with lead upto 50 m excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3 (for petty work qty upto 100 cum) 2160.00 cum 85.00 rs. eightyfive only 183600.00 removal of unsuitable soil with disposal upto 1000 m removal of unsuitable soil including excavation, loading and disposal upto 1000 m lead but excluding compaction ground supporting embankment subgrade replacement by suitable soil, which shall be paid separately as per clause 303.5.2 as per technical specification clause 302.3.11 1080.00 cum 27.00 rs. twentyseven only 29160.00 72 removal of blown sand including taking out and disposal of excavated material with lead up to 50mtr. and lift up to 1.5 mtr disposed soil to be levelled and neatly dressed. 540.00 p. cum 12.00 rs. twelve only 6480.00 compacting original ground compacting original ground supporting subgrade 56 59 68 69 70 71 73 page 4 of 7 loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of tables 300.1 and 300.2 for subgrade construction as per technical specification clause 303.5.2. 15000.00 cum 34.00 rs. thirtyfour only 510000.00 water bound macadam sub base/base wbm grading 1 providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80 100 kn static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density grading 1 as per technical specification clause 404. (by manual means) 2160.00 cum 788.00 rs. seven hundred eightyeignt only 1702080.00 wbm grading 2 providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80 100 kn in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per technical specification clause 405. (using crasher broken aggregate) by manual means 1440.00 cum 1009.00 rs. one thousand nine only 1452960.00 wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at by mechanical means with 1 km lead 360.00 cum 1011.00 rs. one thousand eleven only 363960.00 77 collection of binding material/mooram for w.b.m. course (p.i. 4 to 6), including stacking as per standard specifications 252.00 cum 450.00 rs. four hundred fifty only 113400.00 78 collection of quarry rubbish (p.i. less than 6), grading as per morth specification’s table 400 1, including stacking as per the standard 150.00 cum 350.00 rs. three hundred fifty only 52500.00 79 labour charges for patching w.b.m. using crushed / broken aggregates including preparation of pot hole scarifying & reshaping to the required grade 252.00 cum 185.00 rs. one hundred eightyfive only 46620.00 prime coat medium porosity providing and applying primer coat with bitumen emulsion (ss 1) on prepared surface of granular base including cleaning of road surface and spraying primer 360.00 sqm 51.00 rs. fifty one only 18360.00 tack coat providing and applying tack coat with bitumen emulsion (rs 1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and 720.00 sqm 14.00 rs. forteen only 10080.00 82 providing and laying dense graded bituminous macadam with 100 120 tph batch type hmp producing an average output of 75 tones per hour using 770.00 p. mt 2958.00 rs. two thousand nine hundred fiftyeignt only 2277660.00 providing and laying bituminous concrete with 100 120 tph batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mort & h specifications clause 509 complete in all respects for grading ii (13 mm nominal size) bitumen s 65 2466.00 p. mt 3531.00 rs. three thousand five hundred thirtyone only 8707446.00 providing and laying reinforced cement concrete pipe np3 as per design in single row providing and laying reinforced cement concrete pipe np3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets clause 1106. 600 mm dia 48.00 rmt. 1288.00 rs. one thousand two hundred eightyeignt only 61824.00 85 300 mm dia 48.00 rmt. 540.00 rs. five hundred forty only 25920.00 cement concrete pavement construction of un reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days, using curing compound and water finishing to lines and grade as per drawing and technical specification clause 1501, including vaccum dewatering process with all required equipments 300.00 cum 3482.00 rs. three thousand four hundred eightytwo only 1044600.00 interlocking concrete block pavement 76 3 74 75 80 81 83 84 86 87 page 5 of 7 providing and laying of interlocking m 30 grade concrete block pavements having thickness 80mm as per drawings and technical specification clause 1504 with spreading 30mm thick sand under neath and filling joints with sand including providing and laying cc m30 edge blocks 300mm x 150mm x 300mm size. 3500.00 sqm 541.00 rs. five hundred fortyone only 1893500.00 88 cutting of construction joint/ longitudinal joint 4 to 6 mm. wide & 75 to 100 mm deep using mechanical concrete cutter including cost of diamond bit cutting wheel and filling of bitumen sealing compound in groove including cost of sealing compound. 300.00 mtr 55.00 rs. fiftyfive only 16500.00 providing and fixing of reinforced ferro cement drain cover designed for class aa loading duly marked on cover with adequate steel reinforcement having thickness 75 mm to 150 mm anti corrosive bitumen painted m.s. plate rim and on m.s. lifting hooks admixture like plasticizer bond improving compound shrinkage resistance compound abrasion resistant complete as per approved design etc. drain opening size standard drain cover size 451 mm to 700 mm (1000 x 800 mm) 100.00 sqm 1418.00 rs. one thousand four hundred eighteen only 141800.00 90 701 mm to 1200 mm (1500 x 600) mm 100.00 sqm 1785.00 rs. one thousand seven hundred eightyfive only 178500.00 91 providing and erecting typical citizens information board as per approved drawing & specification of morth made of two ms sheet of 1.6 mm thick each of size 900mm x 750mm stiffend by angle iron 25mmx25mm x 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 swg sheet (vertical post 3050 mm with angle holdfasts and horizontal member 900mm) to be joined by embedded in cement concrete m 15 grade of block of 600mmx 600mm x 750 mm size below ground level as per enclosed drawings & as directed by engineering incharge. all ms will be stove anmeled on both side lettering. figuring and border will be with ready mixed synthethic enamel paint of superior quality in required shade and colour etc complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification. 25.00 each 6600.00 rs. six thousand six hundred only 165000.00 92 marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160 c with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. 200.00 sqm 450.00 rs. four hundred fifty only 90000.00 supply & fixing of m 20 grade precast cement concrete kerb or dand upto 60 cm length over 20 mm thick base of cement mortar 1:6 including jointing earth work, painting & jointing with cement mortar 1:4 of size (22.5 x 25) / 2 x 30 cm 800.00 rmt. 436.00 rs. four hundred thirtysix only 348800.00 94 supply & fixing of direction and place identification sign board made out of 1.2 mm thick ms sheet framed to angle iron 35 x 35 x 5mm and two verticle post of angle iron 35 x 35 x 5mm 3 meter long with hold fast , stove enameled painting and lettering as per design and pattern of size 120 x 90 cm including of digging pits size 30 x 30 x 45 cm and fixing in c.c.1:5:10 including curing complete in all respect. 100.00 each 3800.00 rs. three thousand eignt hundred only 380000.00 painting on concrete/steel surfaces with epoxy painting two coats including prime coat with epoxy paint of approved brand on concrete/steel surfaces after through cleaning of surface to give an even shade as per drawing and technical specification clause 1701 800.00 sqm 96.00 rs. ninetysix only 76800.00 maintenace of bituminous surface road repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat with bitumen emulsion, 20 mm thick pre mix carpet using catonic bitumen emulsion and seal coat type b with bitumen emulsion 300.00 sqm 210.00 rs. two hundred ten only 63000.00 97 providing and laying of kandhal readymade cold patching mix for repair of potholes in adverse climatic conditions including the bituminous mix with a minimum of 5.6% mc 100 cutback bitumen (containing a suitable antistripping agent) by weight of mix and in strict conformance in gradation and other requirements such as 6 month storage life as per the specifications laying in proper camber & grade compaction with road roller and transportation with all lead & lift complete in all respect as per direction of engineer in charge 2500.00 per kg 13.50 rs. thirteen and paisa fifty only 33750.00 supply of dry manure including loading unloading, transportation & stacking at site. fram yard manure (organic). 100.00 cum. 300.00 rs. three hundred only 30000.00 supply of chemical fertilizers at store in bags weighing not less than 50 kg. each including loading unloading & transporation etc. urea 20.00 per 50 kg.bag 220.00 rs. two hundred twenty only 4400.00 100 d.a.p. 20.00 per 50 kg.bag 550.00 rs. five hundred fifty only 11000.00 99 87 89 93 95 96 98 page 6 of 7 101 supply & stacking good earth at site complete including loading unloading & transporation etc. 100.00 cum. 100.00 rs. one hundred only 10000.00 supply of insecticides & pesticides at store in dust / liquid form complete. cholorophyriphos 20 ec. 20.00 per liter 325.00 rs. three hundred twentyfive only 6500.00 supply of p.v.c. hose pipe of different sizes at store including transportation etc complet : 25 mm dia. 50.00 r.mtr. 45.00 rs. fortyfive only 2250.00 supply of different varities of tree / shrubs / climbers according to height and age of the plant at site including loading/ unloading & transportation etc. complete : different varrities of climbers 900 mm to 1500 mm. 3000.00 each 37.50 rs. thirtyseven and paisa fifty only 112500.00 supply of different varities of tree(neem, gulmohar, kasia, alstonia, ashoka,etc.) according to height and age of the plant at site including loading/ unloading & transportation etc. complete : different tree 2401 mm to 3000 mm. 1000.00 each 300.00 rs. three hundred only 300000.00 supply of different sized pots at site store including loading unloading & transporatation etc. complete : cement pot 350 mm size 100.00 each 65.00 rs. sixtyfive only 6500.00 107 maintenance of shrubbary or hedge cutting including disposal of rubbish with all leads & lifts. 1000.00 sqm 3.00 rs. three only 3000.00 108 digging of pits size 60x60x60 cms. including removal of stones. manuring applicable of insecticides & watering atleast 15 litre per plant after planting. 1000.00 per pit. 15.00 rs. fifteen only 15000.00 109 prunning & trumming andcutting of old big trees on the road side the contractor will deposit the cut wood in the deptt. 10000.00 per tree 30.00 rs. thirty only 300000.00 maintenance of plants by the contractor including of pits/bids watering preparation of thavala hoeing weeding etc. & application of insecticieds etc. & security if the plant die during maintenance contractor has to replace same height plant at his own cost. trees 15000.00 per plant per month 10.00 rs. ten only 150000.00 111 shrubs or hedge 36000.00 per plant per month 5.40 rs. five and paisa forty only 194400.00 hire charges of plants & machinery 112 tractor with trolley . 72.00 per day 1050.00 rs. one thousand fifty only 75600.00 113 generator 250 kva. 12.00 per day 1200.00 rs. one thousand two hundred only 14400.00 114 hire and running charges of crane 20 tonne capacity. 12.00 per day 5500.00 rs. five thousand five hundred only 66000.00 115 hydraulic excavator (3d) with driver and fuel. 24.00 per day 6600.00 rs. six thousand six hundred only 158400.00 116 hire charges of diesel truck 9 tonne 72.00 per day 1350.00 rs. one thousand three hundred fifty only 97200.00 hire charges of labour 117 beldar 1200.00 per day 200.00 rs. two hundred only 240000.00 118 coolie 12000.00 per day 200.00 rs. two hundred only 2400000.00 119 blacksmith 1st class 50.00 per day 250.00 rs. two hundred fifty only 12500.00 120 fitter (grade 1) 50.00 per day 280.00 rs. two hundred eighty only 14000.00 121 mason (brick layer) 1st class 50.00 per day 300.00 rs. three hundred only 15000.00 122 kanat 9 x 6 fixed with tent. 30.00 1st day 19.80 rs. nineteen and paisa eighty only 594.00 123 water proof tripal ...

Panchayat Raj Department - Rajasthan

31127482 furniture furniture panchayat samiti kalyanpur , furniture items : , table with padestal & side unit main desk size: 2400 width mm*1200 depth mm* 750 hight mm. top panel 400 mm thick (18 mm mdf + 18 mm mdf + 4 mm natural veneer) veneered potion of work surface is finished with high gloss polyster polyurethance coating. the side panel & modesty are made up of 18mm thick pre laminated mdf board edge sealed with 2mm thick pvc beading. side unit asize: 1200(w)*450(d)*750(h) mm. the hinge door side unit top panel 40mm thick(18 mm mdf + 18 mm mdf + 4 mm natural veneer) veneered potion of work surface is finished with high gloss polyster polyurethance coating. side unit, side pannel, back an shelvesare made up of 18 mm thick pre laminated mdf board edge sealed with 2mm thick pvc beading. the side unit door are of (18 mm mdf + 4 mm natural veneer) veneered potion of work surface is finished with high gloss polyster polyurethance coating. the three drawer unit is made up of 18mm thik pre laminated mdf board edge sealed with 2mm thick pvc beading. the front of drawer are of(18 mm mdf + 4 mm natural veneer) veneered potion of work surface is finished with high gloss polyster polyurethance coating by machine. , conference table 40 seating: size: 675(w)*600(d) per seating and 750(h) mm. with wire manager. the top shall be 36 mm thick shall be made from 36 mm plain mdf having a straight profile with half round edges and with 0.6 mm thick post forming laminate in under structure the legs shall be made from 25mm plain mdf having a straight profile with half round edges and with 0.6 mm thick post forming laminate. overall thickness of leg shall be 26.2 mm. the modesty panel in under structure shall be made from pre laminated mdf boards of 18 mm thick with 2 mm thick pvcedge beading on all sides. all the pvc edge beading should have press through 200° temperature hot melt glue by automatic through feed edge banding machine with corner rounding function. there shall be wire management wire carrier shall be made from 0.6 mm thick crca powder coated and carrier cover shall be made of 12 mm thick mdf painted all over. al the metal parts have free from the dent, burrs and sharp edges, rust, scale and any other foreign element before powder coating. the minumum thickness of powder coated should be 40 50 microns. , visitor chair: seat/back assembly: the seat and back are made up of 1.2 cm thick hot pressed plywood, upholstered with fabric and moulded polyurethane foam with pvc lipping all around. the back foam is designed with contoured lumbar support for extra comfort. mid back chair back size 48.0cm. (w) x 47.0cm. (h) seat size: 45.0cm. (w) x 48.0cm. (d) polyurethane foam: the polyurethane foam is moulded with density = 45 +/ 2 kg/m3 and hardness = 20 +/ 2 on hampden machine at 25% compression. armrests: the one piece armrests made of black integral skin polyurethane with 50 70 shore ‘a’ hardness and reinforced with m.s. insert. the armrests are scratch and weather resistant. the armrests are fitted to the seat with seat/armrest connecting strip assembly made of 0.6cm thick. hr steel. the entire ms sheet cutting should have through nc sheet metal cutting machine and the entire sheet metal banding should have through cnc sheet metal bending machine. tubular frame: the tubular frame is cantilever type & made of dia. 2.54cm (1”) x 14 bg m.s. e.r.w. tube. the bending of frame should have through cnc pipe bending machine. overall dimensions of chair shall be seat height 45.0cm. height 81.5cm, width & depth of chair as measured from pedestal – width 55.0 cm and depth 63.0 cm .all the metal parts have free from the dent, burrs and sharp edges, is have pickled before stove enamellings to remove grease, rust, scale and any other foreign element through treated by phosphating process before powder coating. the metal parts material is then oven baked with a controlled temperature of 180 deg. c to 200 deg. minimum thickness of powder coated should be 40 50 microns. , multipurpose chair – providing and fixing of chairs: seat/back assembly made up of 1.2 ±o.1cm. thick hot pressed plywood and upholstered with fabric upholstery covers and moulded polyurethane foam. back size shall be 42.0cm. (w) x 27.0 cm. (h)and seat size 42.0 cm. (w) x 42.0 cm. (d) with high resilience (hr) polyurethane foam to be moulded with density =45±2 kg/m3 and hardness load 16 ± 2 kg for 25% compression. the chairs shall have tubular frame which is cantilever type & made of 02.54 ±0.03cm. x 0.16 ±0.016cm.thk. m.s. er.w. tube. the seat is fitted to the main frame with seat/main frame connecting strip assembly made of 0.6cm thick. hr steel. overall dimensions of chair shall be 51cm w x 60cm d x 82cm h. all metal part shall be powder coated. , sofa 3+1+1: size of 1 seater sofa shall be 1010 (l) 920 mm (w) 950 (h) seating area length 560 mm & seating area width 510mm. size of 3 seater sofa shall be 1960 (l) 920 mm (w) 950 (h) seating area length 1520 mm & seating area width 510mm. the frame material to be tropical wood + pinewood, length of s spring to be 510 mm, width of belt to be 40mm.there should be pocket on each side of sofa. the seat foam & back foam density to be 40kg/m3 upholstered with leatherette. the material for leg and handleto be wood and should be polished....