Indian Army - Rajasthan

40721182 tender for construction fd electrification hybrid solar 30 kw; 1 please refer schedule a notes before quoting the tender 2 lumpsum price to worked out by contrator for supply, installation and testing of 30 kw wind solar ( off grid ) hybrid system complete including power supply connection up to the distribution box as per technical specification. all as directed in technical specifications. 3 lumpsum price to be worked out by contractor for m&l for construction of pre fabricated steel structure , supply of complete superstructure including trusses, purlins, rafters, extension gable and eaves end member, doors, windows, precast lintels, sunshades, false ceiling, ppgl 0.50mm roofing sheet with frp bubble heat reflective sheet, translucent frp sheet at four places andwind tie etc and substructure including foundation, plinth wall, plinth protection and flooring as specified in technical specifications and drawings. all the secified and as directed in technical specifications 4 internal eletrifcationitems of internal electrification notes gien at the particular technical specificaions ( as per design ) 5 m&l for point wiring using approved colur codingas per is ( red, black and green for single phase citrus ) with multi standard frls copper conductor 1.5sqmm nominal cross sectional area, single core, pvc insulated and unsheathed cable 1100 volts grade, si 694 marked with valid cml no. in and including heavy duty, pvc concealed conduit and is:3419:1976 for conduit accessories ) with mild steel / pressed steel sunken boxes ( with earth duly painted with two coats of anti corrosive paint / aluminum paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3mm thick plastic laminated bakelite sheetcover for fixing of switches, sockets and fan regulators etc, including pvc insulated multi stranded frls copper conductor 1.5sqmm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth duly complete all as specified and directed at site for the following: 6 one light point controlled by 6 s / 6 amps one way switch 7 supply, fixing, connecting and testing of led tube light fittings 1 x 20 wat 1200 mm long box type complete all as specified and directed 8 supply, fixing, connecting and testing of external type bulk head fitting with 12 watt led bulb comple all as specified and directed 9 supply, fixing, connecting and testing of earthing of machinery equipment istalled at power house / substation using 32 x 6 galvanzed ms strip and ms galvanized plate of size 600 x 600 x 6mm, earth electrode all as specified and as directed 10 supply and lay cable xlpe insulated screened, pvc bedded, galvanized steel strip or wire armored, electric power cables ( heavy duty ) 1100 volts grade with stranded aluminium conductors all as per is 7098 ( part 1 1977 ) and part 2 1985of following sizesin trench / wall / floor of 4 core 25 sqmm all as specified and as directed by engineer in charge 11 supply, install, testing and commissioningoutdoor type of factory fabricated lt panel made out of 3.15 mm thick crca sheet and angle iron of size 40 x 40 x 5 mm floor mountedtype with aluminium bus bar of capacity 100 amp 4 nos including two coats of spary synthetic enamel paint over a coat of red oxide, including voltmeter, ammeter, with necessary cts & pts, selector switches, phase indication lamps for three phase system, control panel & power panel wiring, cable alleys at both side, confirming to is:8623, iec:60439 & cpri approved alongwith foundation by pcc 1:4:8 type d2 and protection class ip 54 with theaccessories housing with the following switch gears: ( a ) mccb tpn 415 v, 100 amps 4 pole 25 ka 3 nos. ( b ) volt / amp meter digital multifunctionelectronic type of range0 500 volt & 0 200 amps. ( c ) change over switch 125 amps. 12 supply, install, testing and commissioningoutdoor type of factory fabricated lt panel made out of 3.15 mm thick crca sheet and angle iron of size 40 x 40 x 5 mm floor mountedtype with aluminium bus bar of capacity 100 amp 4 nos including two coats of spary synthetic enamel paint over a coat of red oxide, including voltmeter, ammeter, with necessary cts & pts, selector switches, phase indication lamps for three phase system, control panel & power panel wiring, cable alleys at both side, confirming to is:8623, iec:60439 & cpri approved alongwith foundation by pcc 1:4:8 type d2 and protection class ip 54 with theaccessories housing with the following switch gears: ( a ) mccb tpn 415 v, 63 amps 4 pole 25 ka 2 nos. ( b ) mccb tpn 415 v, 32 amps, 3 pole 25 ka 06 nos. ( c ) volt / amp meter digital multifunctionelectronic type of range0 500 volt & 0 100 amps. ( d ) change over switch 63 amps. ( e ) indicator lamp ryb 13 supply and fixing of pvc unarmed aluminium cable 10 sqm 2 core...

Indian Army - Rajasthan

40629031 tender for construction fd electrification hybrid solar 30 kw; 1 please refer schedule a notes before quoting the tender 2 lumpsum price to worked out by contrator for supply, installation and testing of 30 kw wind solar ( off grid ) hybrid system complete including power supply connection up to the distribution box as per technical specification. all as directed in technical specifications. 3 lumpsum price to be worked out by contractor for m&l for construction of pre fabricated steel structure , supply of complete superstructure including trusses, purlins, rafters, extension gable and eaves end member, doors, windows, precast lintels, sunshades, false ceiling, ppgl 0.50mm roofing sheet with frp bubble heat reflective sheet, translucent frp sheet at four places andwind tie etc and substructure including foundation, plinth wall, plinth protection and flooring as specified in technical specifications and drawings. all the secified and as directed in technical specifications 4 internal eletrifcationitems of internal electrification notes gien at the particular technical specificaions ( as per design ) 5 m&l for point wiring using approved colur codingas per is ( red, black and green for single phase citrus ) with multi standard frls copper conductor 1.5sqmm nominal cross sectional area, single core, pvc insulated and unsheathed cable 1100 volts grade, si 694 marked with valid cml no. in and including heavy duty, pvc concealed conduit and is:3419:1976 for conduit accessories ) with mild steel / pressed steel sunken boxes ( with earth duly painted with two coats of anti corrosive paint / aluminum paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3mm thick plastic laminated bakelite sheetcover for fixing of switches, sockets and fan regulators etc, including pvc insulated multi stranded frls copper conductor 1.5sqmm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth duly complete all as specified and directed at site for the following: 6 one light point controlled by 6 s / 6 amps one way switch 7 supply, fixing, connecting and testing of led tube light fittings 1 x 20 wat 1200 mm long box type complete all as specified and directed 8 supply, fixing, connecting and testing of external type bulk head fitting with 12 watt led bulb comple all as specified and directed 9 supply, fixing, connecting and testing of earthing of machinery equipment istalled at power house / substation using 32 x 6 galvanzed ms strip and ms galvanized plate of size 600 x 600 x 6mm, earth electrode all as specified and as directed 10 supply and lay cable xlpe insulated screened, pvc bedded, galvanized steel strip or wire armored, electric power cables ( heavy duty ) 1100 volts grade with stranded aluminium conductors all as per is 7098 ( part 1 1977 ) and part 2 1985of following sizesin trench / wall / floor of 4 core 25 sqmm all as specified and as directed by engineer in charge 11 supply, install, testing and commissioningoutdoor type of factory fabricated lt panel made out of 3.15 mm thick crca sheet and angle iron of size 40 x 40 x 5 mm floor mountedtype with aluminium bus bar of capacity 100 amp 4 nos including two coats of spary synthetic enamel paint over a coat of red oxide, including voltmeter, ammeter, with necessary cts & pts, selector switches, phase indication lamps for three phase system, control panel & power panel wiring, cable alleys at both side, confirming to is:8623, iec:60439 & cpri approved alongwith foundation by pcc 1:4:8 type d2 and protection class ip 54 with theaccessories housing with the following switch gears: ( a ) mccb tpn 415 v, 100 amps 4 pole 25 ka 3 nos. ( b ) volt / amp meter digital multifunctionelectronic type of range0 500 volt & 0 200 amps. ( c ) change over switch 125 amps. 12 supply, install, testing and commissioningoutdoor type of factory fabricated lt panel made out of 3.15 mm thick crca sheet and angle iron of size 40 x 40 x 5 mm floor mountedtype with aluminium bus bar of capacity 100 amp 4 nos including two coats of spary synthetic enamel paint over a coat of red oxide, including voltmeter, ammeter, with necessary cts & pts, selector switches, phase indication lamps for three phase system, control panel & power panel wiring, cable alleys at both side, confirming to is:8623, iec:60439 & cpri approved alongwith foundation by pcc 1:4:8 type d2 and protection class ip 54 with theaccessories housing with the following switch gears: ( a ) mccb tpn 415 v, 63 amps 4 pole 25 ka 2 nos. ( b ) mccb tpn 415 v, 32 amps, 3 pole 25 ka 06 nos. ( c ) volt / amp meter digital multifunctionelectronic type of range0 500 volt & 0 100 amps. ( d ) change over switch 63 amps. ( e ) indicator lamp ryb 13 supply and fixing of pvc unarmed aluminium cable 10 sqm 2 core...

Indian Army - Rajasthan

40554295 tender for construction fd electrification hybrid solar 30 kw; 1 please refer schedule a notes before quoting the tender 2 lumpsum price to worked out by contrator for supply, installation and testing of 30 kw wind solar ( off grid ) hybrid system complete including power supply connection up to the distribution box as per technical specification. all as directed in technical specifications. 3 lumpsum price to be worked out by contractor for m&l for construction of pre fabricated steel structure , supply of complete superstructure including trusses, purlins, rafters, extension gable and eaves end member, doors, windows, precast lintels, sunshades, false ceiling, ppgl 0.50mm roofing sheet with frp bubble heat reflective sheet, translucent frp sheet at four places andwind tie etc and substructure including foundation, plinth wall, plinth protection and flooring as specified in technical specifications and drawings. all the secified and as directed in technical specifications 4 internal eletrifcationitems of internal electrification notes gien at the particular technical specificaions ( as per design ) 5 m&l for point wiring using approved colur codingas per is ( red, black and green for single phase citrus ) with multi standard frls copper conductor 1.5sqmm nominal cross sectional area, single core, pvc insulated and unsheathed cable 1100 volts grade, si 694 marked with valid cml no. in and including heavy duty, pvc concealed conduit and is:3419:1976 for conduit accessories ) with mild steel / pressed steel sunken boxes ( with earth duly painted with two coats of anti corrosive paint / aluminum paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3mm thick plastic laminated bakelite sheetcover for fixing of switches, sockets and fan regulators etc, including pvc insulated multi stranded frls copper conductor 1.5sqmm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth duly complete all as specified and directed at site for the following: 6 one light point controlled by 6 s / 6 amps one way switch 7 supply, fixing, connecting and testing of led tube light fittings 1 x 20 wat 1200 mm long box type complete all as specified and directed 8 supply, fixing, connecting and testing of external type bulk head fitting with 12 watt led bulb comple all as specified and directed 9 supply, fixing, connecting and testing of earthing of machinery equipment istalled at power house / substation using 32 x 6 galvanzed ms strip and ms galvanized plate of size 600 x 600 x 6mm, earth electrode all as specified and as directed 10 supply and lay cable xlpe insulated screened, pvc bedded, galvanized steel strip or wire armored, electric power cables ( heavy duty ) 1100 volts grade with stranded aluminium conductors all as per is 7098 ( part 1 1977 ) and part 2 1985of following sizesin trench / wall / floor of 4 core 25 sqmm all as specified and as directed by engineer in charge 11 supply, install, testing and commissioningoutdoor type of factory fabricated lt panel made out of 3.15 mm thick crca sheet and angle iron of size 40 x 40 x 5 mm floor mountedtype with aluminium bus bar of capacity 100 amp 4 nos including two coats of spary synthetic enamel paint over a coat of red oxide, including voltmeter, ammeter, with necessary cts & pts, selector switches, phase indication lamps for three phase system, control panel & power panel wiring, cable alleys at both side, confirming to is:8623, iec:60439 & cpri approved alongwith foundation by pcc 1:4:8 type d2 and protection class ip 54 with theaccessories housing with the following switch gears: ( a ) mccb tpn 415 v, 100 amps 4 pole 25 ka 3 nos. ( b ) volt / amp meter digital multifunctionelectronic type of range0 500 volt & 0 200 amps. ( c ) change over switch 125 amps. 12 supply, install, testing and commissioningoutdoor type of factory fabricated lt panel made out of 3.15 mm thick crca sheet and angle iron of size 40 x 40 x 5 mm floor mountedtype with aluminium bus bar of capacity 100 amp 4 nos including two coats of spary synthetic enamel paint over a coat of red oxide, including voltmeter, ammeter, with necessary cts & pts, selector switches, phase indication lamps for three phase system, control panel & power panel wiring, cable alleys at both side, confirming to is:8623, iec:60439 & cpri approved alongwith foundation by pcc 1:4:8 type d2 and protection class ip 54 with theaccessories housing with the following switch gears: ( a ) mccb tpn 415 v, 63 amps 4 pole 25 ka 2 nos. ( b ) mccb tpn 415 v, 32 amps, 3 pole 25 ka 06 nos. ( c ) volt / amp meter digital multifunctionelectronic type of range0 500 volt & 0 100 amps. ( d ) change over switch 63 amps. ( e ) indicator lamp ryb 13 supply and fixing of pvc unarmed aluminium cable 10 sqm 2 core...

North Western Railway - Rajasthan

39068315 tender for ttr ( cs+cmsc ) 29 sets ( 1 in 12 25 sets & 1 in 8.5 4 sets ) in lalgarh suratgarh & ttr ( cs+cmsc ) 13 sets ( 1 in 12 12 sets & 1 in 8.5 1 set ) in lalgarh phalodi under control of aden / line, bikaner painting of rails with anti corrosive paint bituminous ip 56122 or as approved by engineer in charge after cleaning and rubbing of rails with wire brush with contractors labour and material...

Military Engineer Services - Rajasthan

38911722 tender for welcome maintenance of offers married accommodation in central area at ge nasirabad. 1 m & l for preparation of old plastered or unplastered surfaces of wall including cornices etc applying one coat of white wash complete all as specified and directed. 2 all as per srl item no 1.00 here in before but one coat of white wash on ceiling 3 m & l for washing rubbing down and stopping distempered surfaces of wall and applying one coat of oil bound distemper white or tinted complete all as specified and directed. 4 m & l for complete removal of existing treatment of old plastered surface of wall andapplying two coats of oil bound distemper over a coat of 1mm thick putty ( jk / birla ) complete all as specified and directed. 5 m&l for preparation of old surface of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint ( 1st quality ) complete all as specified and directed. 6 m&l for preparation of old surface of steel or iron based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint ( 1st quality ) complete all as specified and directed. 7 m & l for washing rubbing down and stopping of old painted surfaces, removing nails, making good holes, cracks etc and applying one coat of cement base paint complete all as specified and directed. 8 m & l for complete removal of existing treatment and applying two coats of weather proof acrylic emulsion paint over a coat of 1mm thick wall care putty including a coat of emulsion wall primer all as per manufactures instructions complete all as specified and directed.make : asian, apex and berger or equivalent as approved by ge 9 m & l for complete removal of existing treatment of oldsurface of manglore tiles and applying two coats of terracotta roof paint complete all as specified and directed. make : apex / berger 10 taking down cement or cement lime plaster from stone / brick wall, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. 11 dismantling floor, hearth or wall tiles including cement mortar and rubbish off the premises, complete all as specified and directed. 12 demolition of brick / stone masonry built in cement or cement lime mortar in any description complete all as specified and directed. 13 demolition of cement concrete ( unreinforced ) in floors and paving n.exc 15cm thickness ( above or below ground level ) complete all as specified and directed. 14 hacking out old broken glass ( any thickness, size quality or description ) from metal frame including punching or drilling out old glazing, pins, spring clips & providing & fixing new ones and s&f 3.00 mm thick sheet glass, ordinary quality & glazing with oil putty not exc0.50 sqm each pane complete all as spd & directed. 15 hacking out old broken glass ( any thickness, size quality or description ) from metal frame including punching or drilling out old glazing, pins, spring clips & providing & fixing new ones and s&f 3.00 mm thick figured glass, ordinary quality & glazing with oil putty not exc0.50 sqm each pane complete all as spd & directed. 16 taking down chowkhats or frames with shutters ( without taking off shutters from the frames ) n. exc 1.50 sqm each and removing from site complete all as spd & directed and making good disturbed surface of walls in cement mortar ( 1:3 ) complete all as specified and directed. 17 taking down chowkhats or frames with shutters ( without taking off shutters from the frames ) exc 1.50 sqm and n.exc 4.00 sqm each and removing from site complete and making good disturbed surfaces of wall in cm ( 1:3 ) complete all as specified and directed. 18 taking down shutters of any description exc 1 sqm and n.exc 2 sqm each leaf and removing from site complete all as specified and directed 19 m & l for rendering 15mm thick in cm ( 1:6 ) on stone masonry surfaces wall finished even and smooth without using extra cement or surface other than fair face of brick work or on one side of lathing complete all as specified and directed. 20 m & l for rendering 10mm thick in cm ( 1:3 ) on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed. 21 m & l for 15mm thick rendering in cm ( 1:4 ) on brick / concrete surface mixed with water proofing compound @ 3% by weight of cement & surface fair and even complete all as specified & directed. note : wpc will be measured and paid separately 22 m & l for 15 mm thickrough cast plaster mix with crusted stone ( 6 10 mm ) , sand and cement in the ratio 1:1:1 , over 10 mm thick rendering in cm 1:4 as in under coat including dubbing coat ( if required ) complete all as specified and directed. 23 m&l for stone walling of random rubble, uncoursed, well bonded, bedded & solidly hearted, built in cm ( 1:6 ) complete all as specified and directed. 24 all as per sl item no 23.00 here in before but except stones.note: old servieable stones retrieved vide sl item no 12.00 shall be reused. 25 m & l for brick work with fly ash bricks, straight or curved on planto any radius, in half brick thick wall built in cm 1:4 complete all as specified and directed. 26 m & l for brickwork with fly ash bricks, old size, straight or curved on plan exc 6 m mean radius, built in cm 1:6complete all as specified anddirected. 27 dismantling loose / disintegrated portion of rcc chajjas bends shelves, beams balconies and similar work at any position or any height and dubbing out with pcc ( 1:1.5:3 ) , 15mm to 50mm thick using 6 to12mm graded stone aggregate to make up and finished to required shape including applying anti corrosive paint on exposed surface of reinforcement, provision of necessarysupports, form work and 10mm thick plastering in cm ( 1:4 ) finished fair and even complete all as specified and directed. 28 m&l 25mm thick pcc ( 1:2:4 ) type b 0 using 12.5mm graded stone aggregate as in floorcomplete all as specified and directed. 29 m & l for non skid ceramic coloured tiles ( joint free ) , 7 to 8 mm thick ( square / rectangular ) , area of each tile exc 0.18 sqmbut not exc 0.38 sqmin floors etc set and jointed in neat cement slurryand pointed inwhite cement mixed with pigments to match the shade of tile laid over and including screed bed 15 mm thick in cm ( 1:6 ) complete all as specified and directed. 30 m & l for non skid ceramic coloured tiles ( joint free ) , 7 to 8 mm thick ( square / rectangular ) , area of each tile exc 0.11 sqmbut not exc 0.18 sqmin floors etc set and jointed in neat cement slurryand pointed inwhite cement mixed with pigments to match the shade of tile laid over and including screed bed 15 mm thick in cm ( 1:6 ) complete all as specified and directed. 31 m & l for vitrified ceramic tiles light shade 10mm thick ( square / rectangular ) polished area of each tiles exc. 0.18 sqm but n.exc 0.36sqm in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tile laid over and including screed bed 15mm thick in cm ( 1:6 ) complete all as specified and directed. 32 all as per sl item no 31.00 here in before but on vertical surfaces of stone wall such as dados, skirting etc set& jointed in neat slurry and pointed inwhite cement mixed with pigments to match the shade of tile over & including 10 mm thick screed plaster in cm 1:4 complete all as specified and directed. 33 m & l for glazed ceramic coloured tiles, 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces of wall such as dados, skirtingsetc set and jointed in neat cement slurry and pointedin white cement mixed with pigments to match with the shade of tile over and including 10mm thick screed plaster in cm ( 1:4 ) complete all as specified and directed. 34 all as per sl item no 29.00 here in before but on vertical surfaces of stone wall such as dados, skirting etc set& jointed in neat slurry and pointed inwhite cement mixed with pigments to match the shade of tile over & including 10 mm thick screed plaster in cm 1:4 complete all as specified and directed. 35 m&l for 16 18 mm thick granite ( of any type ) work ( table rubbed and polished ) in steps, jambs, pillars, window cills, cooking platform and like set & jointed in neat cement slurry & pointed in white cement ( 1:2 ) using marble dust with admixture of pigment to match with shade of granite including rounding the exposed edgeslaid over & including 15mm thick screed bed in cm ( 1:6 ) complete all as specified and directed. 36 m & l for rolled mild steel work angle iron ( 40x40x6mm ) as in door frame ( chowkhats ) including provn of 10mm dia deformed bar welded horizontally to bottom of frame confirming to fe 210 gde e 165 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed 37 s & f second class hw ( hollock / bansum / sal ) , plain, solid, straight, chowkhats & frames, wrought, framed, rebated on the solid, rounded or chamfered, put together glue pinned at joints complete all as specified and directed. 38 s & f hold fast of flat iron 25x6mm conforming to fe 210 gde e 165including preparing the surfaces & treated with coaltar & sanded with clean sharp sand complete all as specified & directed 39 raking out joints / pointing to random rubble or polygonal rubble stone masonry uncoursed or brought upto courses built in cm and m & l for raised pointing in cement mortar ( 1:4 ) complete all as specified and directed. 40 taking down shutters of any description exc 1 sqm and n.exc 2 sqm each leaf& refixing in the same opening after necessary resecuring or easing & adjusting etccomplete all asspecified and directed. 41 taking down shutters of any description exc 2 sqm each leaf& refixing in the same opening after necessary resecuring or easing & adjusting etc complete all asspecified and directed. 42 s & f 30mm thick flush shuttersolid core construction with block board core and ply wood face panels with commercial face on both sides including 6mm thick iind class hard wood lipping on edges complete all as specified and directed. 43 s & f second class hw hollock / bansum / sal, 35 mm thick, glazed and skeleton shutters, factory made open rebated ( three panels ) and prepare to receive glass, gauge etc without sash bar, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. size of members of shutter shall be as specified in ssr part i, section 8 clause 8.24 ( a ) member shall be kiln seasoned & chemically pressure treated complete all as specified and directed. 44 s&f factory made pvc solid frame of size 50mmx47mm made out of 5mm prelam pvc sheet & edges will be painted to match with prelam sheet reinforced with m.s. square tube and fixing in opening as per specification & drawing as perssr 2020 complete all as specified and directed. 45 s & f factory made solidpvc mouldeddoor shutter with wood free eps, 28 to 30mm thick, ( styles ) with 2 raised panel design with 2mm thick moulded prelaminated pvc sheeton front face & 2mm thick plain colour pvc sheet on back face, and fixing in the frame at site as per specification and drawings on page 161 of ssr ( part ii ) 2020 complete all as specified and directed. 46 s & f in repair steel window / ventilator factory made, made out of ms hollow section 79mmx39mmx1.6mm thick frame with double shutters ( glazed & wire gauge shutters ) made out of z section using flush butt welding & tenon riveting all as per is 1038 / 83, dobby hinges shall be provided to both shutters. locking arrangements as per sample approved by ge, provided with knob, 10mm ms square bars in grills, z section handle 100mm sized & 150mm long hook & eye welded to frame & shutter, four nos lugs welded to frame including necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fasts and making good in pcc 1:2:4 type b 1 including preparation of surfaces & applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed.note : wire mesh and sheet glass shall be measured & paid separately under respective items. 47 taking down of old boards and s & f 18 / 19mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination, fixed with screws including teak wood lipping 19 x 6mm thick fixed with nails in shelves, partition and palmet boxes, shelves, almirah book cases, toilet boxes, racks, cup board shutter and similar works complete all as spepcified and directed. 48 s & f aluminium alloy, anodised sliding door bolt, 300mm long, isi marked, with hasp and staple ( bolt type ) and fixing bolts and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed. 49 s & f in repairs aluminium alloy, anodised sliding door bolt, 300mm long, isi marked, with hasp and staple ( bolt type ) and fixing bolts and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed. 50 s&f mild steel butt hinges, medium weight, cold rolled, isi marked of size 125 mm complete all as specified and directed. 51 s&f in repairs mild steel butt hinges, medium weight, cold rolled, isi marked of size 125 mm including necessary welding work etc complete all as specified and directed. 52 s&f aluminium, anodised, barrel tower bolt of extruded section, isi marked, 150 mm long complete all as specified and directed. 53 s&f in repairs aluminium, anodised, barrel tower bolt of extruded section, isi marked, 150 mm long complete all as specified and directed. 54 s&f 150 mm long extruded aluminium alloy handle fabricated type anodized complete all as specified & directed. 55 s&f in repairs 150 mm long extruded aluminium alloy handle fabricated type anodized complete all as specified & directed. 56 s & f stainless steel wire cloth0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed 57 s & f in repairs stainless steel wire cloth0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed 58 s & f in repairs floor door stopper aluminium alloy body & tongue of size 140mm, anodised with hard drawn spring, fixed in door, over all length of cover plate of complete all as specified and directed. 59 taking down the existing material and s&f 300 mm rat tail rod mild steel ordianarypattern springs including roller and roller plate complete all as specified and directed. 60 s & f in repairs 100mm size hasp and staple, aluminium anodised, safety type including bolt to hinge plate complete all as specified and directed 61 s & f in reapirs25mm dia ms chromium plated curtain rod powder coated tubular, fancy type, complete all as specified and directed. 62 s&f in reapirs ms chromium plated powder colour coated, decorative type knobs with bracket fixed at end of pelmet rod suitable for 25mm dia complete all as specified and directed. 63 dismantling of exisiting unserviceable rcc / pvc water tank of capacity not exceeding 500 litre each s&f 500 litre capacity rotational moulded polyethylene water storage tanks double layered ( cylindrical vertical with closed top ) isi marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in ssr part i. 64 dismantling of exisiting unserviceable rcc / pvc water tank of capacity not exceeding exc 500 but n. exc 1000 litre each s&f 1000 litre capacity rotational moulded polyethylene water storage tanks double layered ( cylindrical vertical with closed top ) isi marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in ssr part i. 65 taking out old unserviceable water closet ( squatt pattern ) and s & f vitreous china, squatting panorissa pattern size 580x440mm, white with integral foot rests ( excluding flushing cistern and flush pipe ) with chinaware ‘p’ or ‘s’ trap, front or back inletincluding connection to trap and to flushing pipe, anti syphonage pipe and making good the floor to match the existing completeall as specified and directed. 66 taking out old unserviceable water closet and s & f vitreous china wash down closet pan ( pedestal pattern ) , white, including plastic cover white closed pattern whith flat bottom and mild steel chromium plated / pvc hinge device including connections to drain ( or outgoing pipe ) and to flushing pipe, anti syphonage pipe etc complete all as specified and directed. 67 taking down old unserviceable whb and s&f vitreous china, white, wash hand basin flatback of size 550 x 400mm complete all as specified and directed 68 demolition of cement concrete ( unreinforced ) in any position & of any description from sunken floor ( ground or 1st floor ) and removing and depositing materials exc 50mtrs level not exc. 1.5m above the starting point complete all as specified and directed. 69 m & l for cement concrete 1:5:10 type e2 using 40mm graded stone aggregate as in sunken floors filling and mass concrete complete all as specified and directed. 70 m&l 20mm thick cement plaster in cm 1:4 mixed with water proofing compound @ 3% and applying water proffing treatment on sunken portion with acrylic based polymer modified cementitious composit compound as specified and approved & cement slurry two layers, 1st layer @ 0.488 kg / sqm mixed with composit compound @ 0.253 kg / sqm & the second layer slurry @ 0.242 kg / sqm mixed 0.126 kg of compound complete with min 4 hours allowed to air cure between these layers and applying 200 polyflim with adhesive complete all as specified and directed. 71 m&l for 50mm thick pcc ( 1:3:6 ) type c 1 using 20mm graded stone aggregate as in plinth protection finished fair and even laid in alternatebays n.exc 2m in length and joints filled with bitumen mastic 1:3 ( 1 bitumen :3 sand ) complete all as specified and directed. 72 s & f in repair pvc valve less, syphonic action type flushing cistern, isi marked, 10 litre capacity, low level, white / ivory colour, with inlet, ball valve, float, handle fixed with pvc rawl plug of suitable size complete all as specified and directed. 73 s & f in repair pvc flush pipe of approved quality 32 mm bore, for low level flushing cistern complete all as specified and directed. 74 s & f in repair brass chromium plated shower rose of 100mm size with swivel joints, including fixing to steel pipe or union complete all as specified and directed. 75 taking down old unserviceable pvc connectionand s & f pvc connection, heavy duty 15 mm bore, 45 cm long with two nos ptmt nuts at both ends of approved quality complete all as specified and directed 76 s&f in repair pillar tap, 15mm bore, cast copper alloy, chromium plated, isi marked, screwed down high pressure with or without lettred hot or cold with long screw shanks and fly nuts screwed for iron pipe complete all as specified and directed 77 s&f in repair stop / angle valve 15mm bore cast copper alloy, chromium plated, isi marked with long crutch or butterfly handle screwed down high pressure screwed both ends for iron pipe complete all as specified & directed. 78 s&f in repairs 25mm bore gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipes and fixed all as directed. 79 taking down old unserviceable waste pipe and s&f 32mm bore pvc waste pipe of 75mm length with oneend socketed complete all as specified and directed. 80 s & f in repairs grating square / round 140mm size of ptmt with centre hole movable or side hole for fix to waste pipe ( minimum weight 50 gms ) complete all as specified and directed. 81 s & f in repairs 15 mm bore bib taps standard of ptmt any colour, screwed for iron pipe and fixed complete all as specified and directed. 82 taking down old unserviceable water closet seat cover & s&f plastic water closet seat cover, white, closed pattern with flat bottom and cover & mild steel chromium plated or aluminised hinging device complete all as specified and directed. 83 taking down old unserviceable kitchen sink and s&fkitchen sink with drainage board overall size not less than 915x460mm, bowl size 410x 330x160mm made of stainless steel 1.00 mm thick with plugs, washers and waste including fixing cantilever brackets and connecting union complete all as specified and directed.note : minor variation in dimension + 20mm as per standard catalogue of manufacturer may be approval of ge in writing without price adjustment. 84 s & f in repairs stainless steel plate rack made of 0.50mm thick of over all size914mm x 609 mm x 255 mm and weight not less than 7.00 kg each of approved quality complete all as specified and directed.note : minor variation in dimension may be permitted as per standard manufacturing models of manufacturer without price adjustment with prior approval of ge but weight shall not be less than 7.00 kgs. 85 s & f waste coupling cp 32mm dia for glazed ware basins etc with long screwed shanks and fly nuts flanged etc complete all as specified and directed. 86 s & f in repair bib taps isi marked, cast copper alloy, chromium plated, isi marked with crutchor butterfly handle, screwed down, screwed for iron pipeor for brass ferrule and fixed for 15 mm boreof pipe complete all as specified and directed. 87 s & f in repair pvc ( swr ) floor trap with grating 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed. 88 taking down old unserviceable mirror and s & f looking mirror of size 600 mm x 450 mm x 5.5mm thickof selected quality, mounted on pvc frame and fixed to and including wooden plugs with chromium plated brass screwswasher cup washer complete all as specified and directed. 89 s & f in repair tubular towel rail, chromium plated brass 20mm dia ‘d’ type 60cm long between flanges complete all as specified and directed. 90 s & f in repair for toilet fittings chromium coated towel rack 600mm long without lower haners but three hookscomplete all as specified and directed. 91 s & f in repair brass wall mixer 15mm bore cast copper alloy chlromium plated wall each mixer with hot and cold water with crutch handlecomplete all as specified and directed. 92 s & f in repair for toilet fittings corner glass shelf with bracket complete all as specified and directed. 93 s & f in repair for toilet fittings wall mixer ( wall mounted model ) with teliphonic shower rose complete all as specified and directed. 94 s & f in repair for toilet fittings wall teliphonic shower with 1.5 mtr long flexible tube & swivel wall hookcomplete all as specified and directed. 95 s & f in repair for toilet fittings health faucet with 1.2mtr long flexible tube & swivel wall hook complete all as specified and directed. 96 s & f in repair for pvc cabinet of size 422mm x 622mm with mirror of good quality with shelves in bath fixed complete to wallscomplete all as specified and directed.make : prayag cat no. 555 or make and model are equivalent as approved by ge. 97 s & f in repair for toilet fittings two way bib cock of 15mm bore complete all as specified and directed. 98 taking up or down steel tubing and connection 15mm bore keeping aside for reuse or removingto store complete all as specified and directed. 99 all as per srl item no 98.00 here in before but 20mm bore 100 all as per srl item no 98.00 here in before but 25mm bore 101 supply and fix mild steel water tubing 15 mm dia galvanised medium grade including all fittings ( such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc ) and fixed to walls / ceilings / laid on floors including testing complete all as specified and as directed. 102 all as per srl item no 101.00 here in before but 20mm bore 103 all as per srl item no 101.00 here in before but 25mm bore 104 refixing only 15mm bore old gi tubing to walls, ceiling or laid on floor including necessary cleanig, cutting, screwing and new fittings such as elbow, tee, union, socket, reducer etc complete all as specified and directed. 105 all as per srl item no 104.00 here in before but 20mm bore 106 all as per srl item no 104.00 here in before but 25mm bore 107 supply only liquid water proofing compound, isi marked complete all as specified & directed 108 m&l in repairs for 2nd class hard wood plain fillets, square , rectangular or triangular area exec. 6 sqcm but n. exec 13 sqcm in sectional, clean sawn, secured with nails complete all as specified and directed. 109 s & f in repairs 75mm bore pvc ( swr ) pipe single socketed in any length with rubber ring joints fixed to wall isi mark, complete all as specified and directed. 110 s & f in repairs 110mm bore pvc ( swr ) pipe single socketed in any length with rubber ring joints fixed to wall isi mark, complete all as specified and directed. 111 s & f in repairs 75mm bore pvc ( swr ) bend / shoe with oval access door of any radius complete all as specified and directed. 112 s & f in repairs 110mm bore pvc ( swr ) bend / shoe with oval access door of any radius complete all as specified and directed. 113 s&fin repair 75mm bore pvc ( swr ) junction single ( single t ) equal or unequal complete all as specified and directed. 114 s & f in repairs 110mm bore pvc ( swr ) junction single ( single t ) equal or unequal complete all as specified and directed. 115 m&l for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over & including one coat of 1mm thick cement putty complete all as specified & directed.. 116 m&l for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified & directed. 117 m & l for preparation of newly plaster surfaces of wall& applying two coats of cement base paint over a coat of primer complete all as specified and directed. 118 m&l for preparation of new steel surfaces of any description over 10 cm width or girth applying two coats of synthetic enamel paint ( 1st grade ) over a coat of red oxide primer complete all as specified. 119 m&l for preparing the new wooden surface of any description over 10 cm width or girth & applying two coats of synthetic enamel paint ( 1st grade ) over one coat of pink primer complete all as specified & directed. 120 s&f in repair jet flush including plate and coonection pipe complete all as specified and directed. 121 m&l for machine cut kota stone slab flooring of size 550mm x 550mm 20 25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishinglaid over & including 15mm thick screed bed in cm 1:6 complete all as specified & directed. 122 m&l for kota stone slab 20 25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing in riser of steps, skirting, dado and pillar laid over & including cement screed 10mm thick in cm ( 1:4 ) complete all as specified & directed. 123 only on old surfacesmirror polishing on marble / granite / kota stone where ever required to give high gloss finish complete all as specified & directed. 124 m&l for crack repair in wall, ceiling and roof with cm 1:3 mixed with water proofing compound @3% by weight of cement, width of crack is 25mm and 50mm deep including necessary demolition and making good disturbed surfacecomplete all as specified & directed.note : wpc measured and paid separately 125 supply and fixing in repairs18mm thick ( one side decorative lamination & other side balancing lamination sheet density 600kg / m3 ) solid pvc board with edge bending on edgeswith cement solvent adhesive for shutter / kitchen cabinet / cup boards / partition wall / wall cabinet and similar work completeall as specified and directed. make : rajshree / kitply / century or equivalent as approved by ao. 126 supply and fixing in repairs12mm thick ( one side decorative lamination & other side balancing lamination sheet density 600kg / m3 ) solid pvc board with edge bending on edges with cement solvent adhesive for shutter / kitchen cabinet / cup boards / partition wall / wall cabinet and similar work complete all as specified and directed.make : rajshree / kitply / century or equivalent as approved by ao. 127 s&f stainless steel soft close hinge with assembly, complete all as specified and directed.make : godrej code no. 5070 128 s&f 125 mm dia oval shape brass handle fancy type bright finish complete all as specified & directed. 129 s&f stainless steel basket ( plain ) of approved quality of size 520 x 485 x 100mm complete all as spepcified and directed. make : godrej ss 304 code no. 6154 130 s&f stainless steel plate / thali basket of approved quality of size 520 x 485 x 200mm complete all as spepcified and directed. make : godrej ss 304 code no. 6168 131 s&f stainless steel cutlery basket of approved quality of size 520 x 485 x 100mm complete all as spepcified and directed. make : godrej ss 304 code no. 6162 132 s&f stainless steel cup & saucer basket of approved quality of size 520 x 485 x 100mm complete all as spepcified and directed. make : godrej ss 304 code no. 6159 133 s&f stainless steel two shelf pull out basket of approved quality of size 150 x 485 x 430mm complete all as spepcified and directed. make : godrej ss 304 code no. 6169 134 s&f steel ball bearing basket / trolly / drawer channel 50cm long complete all as spepcified and directed.make : godrej code no. 8178 135 total in figures 136 quoted amount in words...

Nuclear Fuel Complex - Rajasthan

32743298 power supply to plant equipment at zfff facility at nfc kota 1 supply & laying of following sizes of 1.1 kv grade, alluminium / copper conductor, xlpeinsulated, pvc extruded inner sheath, round armoredand frls pvc st2outer sheathes cablesas per tender specifications. 2 3.5c, 300 sqmm aluminium conductor cable 3 supply 4 installation 5 3.5c, 185 sqmm aluminium conductor cable 6 supply 7 installation 8 3.5c, 150sqmm aluminium conductor cable 9 supply 10 installation 11 3.5c, 120sqmm aluminium conductor cable 12 supply 13 installation 14 3.5c, 95 sqmm aluminium conductor cable 15 supply 16 installation 17 3.5c, 70 sqmm aluminium conductor cable 18 supply 19 installation 20 3.5c, 50 sqmm aluminium conductor cable 21 supply 22 installation 23 3.5c, 35 sqmm aluminium conductor cable 24 supply 25 installation 26 3.5c, 25 sqmm aluminium conductor cable 27 supply 28 installation 29 4c, 16 sqmm aluminium conductor cable 30 supply 31 installation 32 4c, 6sqmm copperconductor cable 33 supply 34 installation 35 4c, 4sqmm copperconductor cable 36 supply 37 installation 38 4c, 2.5 sqmm copperconductor cable 39 supply 40 installation 41 3c, 4sqmm copperconductor cable 42 supply 43 installation 44 3c, 10sqmm copperconductor cable 45 supply 46 installation 47 3c, 16 sqmm copperconductor cable 48 supply 49 installation 50 supply and making end terminations for following sizes of 1.1 kv grade, xlpe / pvc insulated and pvc sheathed armoured cables withrequired hard ware like double compressed weather proofglands, heavy duty long barrelcopperlugs etc complete. 51 3.5 c x 300 sq. mm 52 supply 53 installation 54 3.5 c x 185 sq. mm 55 supply 56 installation 57 3.5 c x 150 sq. mm 58 supply 59 installation 60 3.5 c x 120 sq. mm 61 supply 62 installation 63 3.5 c x 95 sq. mm 64 supply 65 installation 66 3.5 c x 70 sq. mm 67 supply 68 installation 69 3.5 c x 50 sq. mm 70 supply 71 installation 72 3.5 c x 35 sq. mm 73 supply 74 installation 75 3.5 c x 25 sq. mm 76 supply 77 installation 78 4 c x 16 sq. mm 79 supply 80 installation 81 4 c x 6 sq. mm 82 supply 83 installation 84 4 c x 4 sq. mm 85 supply 86 installation 87 4 c x 2.5 sq. mm 88 supply 89 installation 90 3c x 4 sq. mm 91 supply 92 installation 93 3c x 10 sq. mm 94 supply 95 installation 96 3c x 16 sq. mm 97 supply 98 installation 99 supply and installation of 300 mm wide 2.0 mm thick 100 mm height, ladder type prefabricated hot dip galvanised steel cable trays, fabricated out of hot rolled sheet steel with rigid welded construction ladder type ofapprovedmakeandcabletray fittings, bends and aceessories except steel supports as specificationsofthistenderand directionsofengineer in charge. 100 supply 101 installation 102 supply andinstallationofstructural steel for baseframes, supportsforswitchgear, andbracketsformiscellaneous electrical equipments and cable tray supports out of sections, pipes, platesetc.includingshotblasting, welding, bolting, rivetting, supplyofnecessaryanchorboltsandgrouting etc., supplyofpaintandapplyingonecoatofanti rust primerandtwofinishedcoatsofapprovedsynthetic enamel paint ( as per applicable isforhighlycorrosiveenvironment ) including breakingwalls, floorsetc. making it good forstructuresas required includingsupplyofallgihardwarematerials completeasperapproveddrawings, specifications of this tender and directions of engineer in charge. 103 supply 104 installation 105 supply, installation and connection of following gi earthing strip along the cable trenches or cable trays or fixing to walls or structures including welding, providing cold galvanising spray / anti corrosive paint / bitumen at joints and clamping etc., with all labour and materials as per approved drawings and specifications of this tender and as directed by engineer in charge....

Nuclear Fuel Complex - Rajasthan

32743272 power supply to plant equipment at pfff facility nfc kota supply & laying of following sizes of 1.1 kv grade, alluminium / copper conductor, xlpeinsulated, pvc extruded inner sheath, round armoredand frls pvc st2outer sheathes cablesas per tender specifications. 2 3.5c, 240 sqmm aluminium conductor cable 3 supply 4 installation 5 3.5c, 150sqmm aluminium conductor cable 6 supply 7 installation 8 3.5c, 120sqmm aluminium conductor cable 9 supply 10 installation 11 3.5c, 95 sqmm aluminium conductor cable 12 supply 13 installation 14 3.5c, 70 sqmm aluminium conductor cable 15 supply 16 installation 17 3.5c, 50 sqmm aluminium conductor cable 18 supply 19 installation 20 3.5c, 35 sqmm aluminium conductor cable 21 supply 22 installation 23 3.5c, 25 sqmm aluminium conductor cable 24 supply 25 installation 26 4c, 6sqmm copperconductor cable 27 supply 28 installation 29 4c, 4sqmm copperconductor cable 30 supply 31 installation 32 4c, 2.5 sqmm copperconductor cable 33 supply 34 installation 35 supply and making end terminations for following sizes of 1.1 kv grade, xlpe / pvc insulated and pvc sheathed armoured cables withrequired hard ware like double compressed weather proofglands, heavy duty long barrelcopperlugs etc complete. 36 3.5 c x 240 sq. mm 37 supply 38 installation 39 3.5 c x 150 sq. mm 40 supply 41 installation 42 3.5 c x 120 sq. mm 43 supply 44 installation 45 3.5 c x 95 sq. mm 46 supply 47 installation 48 3.5 c x 70 sq. mm 49 supply 50 installation 51 3.5 c x 50 sq. mm 52 supply 53 installation 54 3.5 c x 35 sq. mm 55 supply 56 installation 57 3.5 c x 25 sq. mm 58 supply 59 installation 60 4 c x 6 sq. mm 61 supply 62 installation 63 4 c x 4 sq. mm 64 supply 65 installation 66 4 c x 2.5 sq. mm 67 supply 68 installation 69 supply and installation of 300 mm wide 2.0 mm thick 100 mm height, ladder type prefabricated hot dip galvanised steel cable trays, fabricated out of hot rolled sheet steel with rigid welded construction ladder type ofapprovedmakeandcabletray fittings, bends and aceessories except steel supports as specificationsofthistenderand directionsofengineer in charge. 70 supply 71 installation 72 supply andinstallationofstructural steel for baseframes, supportsforswitchgear, andbracketsformiscellaneous electrical equipments and cable tray supports out of sections, pipes, platesetc.includingshotblasting, welding, bolting, rivetting, supplyofnecessaryanchorboltsandgrouting etc., supplyofpaintandapplyingonecoatofanti rust primerandtwofinishedcoatsofapprovedsynthetic enamel paint ( as per applicable isforhighlycorrosiveenvironment ) including breakingwalls, floorsetc. making it good forstructuresas required includingsupplyofallgihardwarematerials completeasperapproveddrawings, specifications of this tender and directions of engineer in charge. 73 supply 74 installation 75 supply, installation and connection of following gi earthing strip along the cable trenches or cable trays or fixing to walls or structures including welding, providing cold galvanising spray / anti corrosive paint / bitumen at joints and clamping etc., with all labour and materials as per approved drawings and specifications of this tender and as directed by engineer in charge. 76 supply 77 installation 78 supply installation and testing of maintenance free copper bonded earth rod of 3 mtr length having the dia of 25mm with 25 kg nonpolluting chemically inert earth enhancement compound. the electrodes shall be made of high tensile low carbon steel rod, molecular bonded with 99.9% electrolytic copper with minimum coating thickness of 250 microns suitable for 35ka irms for 1 sec and as per iec 62561 2. the work shall be complete with ss clamps, earth chamber, removable cover, etc. and as per tender specifications...

Hindustan Petroleum Corporation Limited - Rajasthan

18189437 tender for construction of earth pits at hpcl ajmer terminal under north west zone construction of plate type earth pit as per is 3043 revamping of earthing stations at locations by supply & construction by using 3 mtr. long pipe electrode of gi of 100 mm dia, back filling with charcoal, salt, compound and other accessories and hardwares as per is: 3043. rates to include testing with megger and submitting test certificates as per local electricity board rules. rate to include carrying out modifications if required and re testing till the required values are achieved as per oisd norms less than 2 ohms. rate shall also include the supply & construction of brick masonary chamber with ci manhole cover with frame etc complete. supply, laying and welding of 50x6mm gi flat for earthing of connecting equipment / overlaps will not be paid extra. weld joints to be painted with bitumen. 50 x 6 mm g.i. stripe: supply, laying and connection of following size hot deep gi stripe along the structure, tray etc. including welding at joints, anti corrosive paint on welded portions clamping complete with gi hard wares, labour etc 50 x 6 mm g.i. stripe: supply, laying and connection of following size hot deep gi stripe along the structure, tray etc. including welding at joints, anti corrosive paint on welded portions clamping complete with gi hard wares, labour etc. dismantling of earthing pits along with all gi parts and gi pipes long. vendor to seggregate metallic parts and stack it in the designated place inside plant premises....

Hindustan Petroleum Corporation Limited - Rajasthan

17464811 tender for bore well work jdro , job includes drilling of borewell of 8 inch diameter with all necessary material and manpower etc. at the specified location by officer in charge. payment will be made as per actual running feet drilled, supply, assembly and fixing of casing pipe (6 mm thick) in bore, fe 410 mild steel screwed and socked/plain ended casing pipes of required diameter as per attachments, confirming to is:4270, of reputed and approved make like etc, including painted with outside surface with two coats of anti corrosive paint of approved brand and manufacture like approved make, etc., including required hire and labour charges, fittings & accessories, all complete, for all depth as per directions of officer in charge, 6 mm thickness., 40 mm dia hdpe pipe for borewell as per approved specifications and directions of engineer in charge, installation, making all connections and commissioning of 3 hp, 3 phase, centrifugal water pump...

North Western Railway - Rajasthan

12584818 tender for miscellaneous repair and maintenance of track works under aden / line / bikaner painting of rails with anti corrosive paint bituminous ip 56122 or as approved by engineer in charge after cleaning and rubbing of rails with wire brush, drilling & chamfering of 32mm holes in 90r / 52 kg / 60kg. rails within specified tolerance including all tools & plants, machinery, handling, rehandling, consumable power, labour etc....

Nuclear Power Corporation Of India Limited - Rajasthan

11648818 supply of absorber tower assembly for the air dryer unit, supplied by kirloskar pneumatic co.ltd. pune, as per attached specification and confirming to following against eil job no.: 2782/rg/04 and 05 npcil drawing no.: rapp 3&4/75000/2528/dd/r0 ( part of ga drawing : rapp 3&4/75000/2523/g.a. r 0) , kirloskar pneumatic co. ltd. drawing no.: 290 13 000 50/r1 (part sr no: 1, drg no.: 290.13.100.50) . special note 1. inspection will be carried out by npcil qa as per quality assurance plan (qap) approved by indenting section . qap need to be supplied along with offer. 2. fabrication, examination, inspection and testing will be carried out as per relevant asme code 3.outside vessel will be painted with two coat of rust preventive primer followed by ‘sky blue’ colour anti corrosive paint. 4. ut of the fabricated tank will be carried out . thickness must confirm the thickness mentioned in drawing. stand tolerance as mentioned in the relevant standard is applicable . 5. all outside tank insulation including supply of material will be in npcil scope and will be carried out at site....