Milk Producer Cooperative Limited - Rajasthan
39661409 tender for supply of aluminum alloy milk cans with lids...
1
alluminium alloy Tenders in Rajasthan
2
Department Of Atomic Energy - Rajasthan
39588743 bids are invited for wrought aluminium and aluminium alloys bars, rods and sections (general engineering purposes) as per is 733 (q3) total quantity : 20...
3
Government Of Rajasthan - Rajasthan
39569139 tender for supply, installation, testing and commissioning of data processor and milk collection unit and aluminium alloy milk cans with lids capacity 40 lil...
4
North Western Railway - Rajasthan
39434152 supply of bi metallic parallel clamp ( 15 / 20 ) made of aluminium alloy complete with fasteners confirming to rdso drawing no. eti / ohe / p / 1560 rev d or latest and rdso spec. no. ti / spc / ohe / fittings / 0130 ( 10 / 13 ) rev. 1 or latest. [ warranty period: 30 months after the date of delivery ] ...
5
North Western Railway - Rajasthan
39332048 supply of interchangeable, preset torque wrench with pre set value locking and safety device.having a spigot dia. of 16 mmmade of single piece of aluminium alloy body.torque range: 80 400 nm ( 60 300 lbf. ft. ) weight: 2.00 kgs. or less, length: 633mmsupply along with 1 / 2 inch sq. drive ratchet head for vande bharat train . make gedore / armstrong / ridgid or superior...
6
Department Of Atomic Energy - Rajasthan
39320291 bids are invited for cast aluminium alloy cryogenic (q3) , sealing tape roll for pipe freezing purpose (q3) , sealing tape roll for pipe freezing purpose. (q3) total quantity : 21...
7
Department Of Atomic Energy - Rajasthan
39240551 bids are invited for mass set class 1 with weight calibration certificate shall include the following: a ) material: austenitic stainless steel b ) construction: solid single piece fabrication c ) cavity: no cavity adjustment d ) density: 8.00 g / cm3 5 ) magnetic susceptibility: <0.005 e ) shape: cylindrical with knob f ) finish: minor polish g ) packing: aluminium alloy box h ) intensity of polarization: < 2.5 μt i ) accessories: tweezer, cloth, gloves j ) mass set classe 1 with weight calibration certificate includes the following ( q3 ) total quantity : 2...
8
Military Engineer Services - Rajasthan
39191248 tender for special repair to bldg no t 04 and p 25 at lgj mil station; 1 dismantling of brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed by engineer in charge. 2 demolition mud in roofs, any thickness, including plastering and leeping complete all as specified and directed. 3 demolition of cement concrete of any description ( unreinforcement concrete ) and in any position not otherwise specifically provided for complete all as specified and directed. 4 demolition of brick work or stone / boulder masonry, built in cement mortar including allquoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed by engineer in charge. 5 demolition of cement concrete of any description ( reinforcement cut as required to facilitate ) demolitionand in any position not otherwise specifically provided for complete all as specified and directed. 6 formwork to chajjas, troughs and similar items including edges , for rough surface of concrete, complete all as specified and directed by engineer in charge 7 m&l for reinforced cement concrete 1:1.5:3 type a 1 using 20mm graded stone aggregrate in chajjas; complete all as specified and directed by engr in charge.note : reinforcement shall be measured and paid seperately. 8 m&l for 40 mm thick cement concrete type b0, 1:2:4 ( 12.5 mm graded stone aggregate ) as in roof padding and laid in slope 1:30 complete all as specified. 9 m&l applying evenly a tack coat of industrial bitumen 85 / 25 at the rate of 1.2 kg per sqm as in roof including cleaning surfaces all as specified and directed 10 m & l app based membrance minimum weighing 3 kg per sqm and minimum 3mm thick reinforced with polyster non woven fabric ( wt not less than 150 gms / sqm ) laid on primed surface by torced application with app membrane over10mm thick screed bed in cm 1:3mixing of wpc in mortarcomplete all as specified & directed. 11 m & l for cement concrete tiles 25cm x 25cm x 22mm thick, m a c h i n e pressed; over cement screed base laid over cement screed base laid over and including15 mm thick screed bed incement mortar 1:6, set and jointed with grey cement slurry mixed with pigment and no pigmentin floors / roof, and cut and polished complete all as specified and directed. 12 m&l pcc 1:2:4 type b 1, using ( 20mm graded stone aggregate ) as in roof kerbs or mud stops, rounded or chamfered on edges including necessary form work etc complete all as specified & directed 13 m&l forbrick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar ( 1:6 ) all as specified & directed. 14 m&l for old size brick work with fly ash bricks straight or curved any radius half brick thick walls, built in cement mortar ( 1:4 ) all as specified & directed. 15 s&f for framed work such as grills, gratings etc., with ends of bars shouldered and / or riveted, or forget into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to fe 290 0 or grade e 165 complete all as specified and as directed 16 taking down wooden chowkhats or frames with shutters ( without taking off shutters from the frames ) area exceeding 1.50 sqm but not exceeding 4.00 sqm each and removing from site all as specified & directed 17 taking down existing shutter and refixing in same opening shutters of any description exc 1.0 sqm but not exc 2.0 sqm each all as specified and directed. ( note: refixing includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. ) 18 taking down wooden chowkhats or frames n.exc 1.5 sq. m each with shutters ( without taking off shutters from the frame ) complete all as specified and directed by engr in charge. 19 taking down shutters of any description exc 1.00 sqm but not 2.00 sqm each including removing to store complete all as specified and directed. 20 supply & fixing 35mm thick 2nd class hard wood factory made plain framed panelled shutters ( two panels ) with lock rail and panel inserts of comercial veneered particle board with commercial veneering on both faces.the size of rails and styles as per is 1003 ( part i ) , kiln seasoned and chemically pressure treated all as specified & directed 21 supply and fixing of fibre glass reinforced plastic ( frp ) door frame of required built in colour in three legged of cross section 90mm x 45mm having single ribate of 32mm x 15mm to recieve shutter of 30mm thick includinglaminated door frame moulded with fire retardant grade unsaturated polyster resin and chopped strand mat ( csm ) also door frame laminated shall be 2mm thick and shall be filled with suitable wooden block of 2nd class hard wood in all three legs frame shall be covered with fibreglass from all sides ms stay flat iron 25mm x 3mm shall be provided at the bottom to steady the frame complete all as specifiedand as directed by engineer in charge. 22 supply and fixing of 30 mm thick glass fibre reinforced plastic ( frp ) paneled door shutter conferming to is:14856 2000 of required colour andmade with fire retardant grade unsaturated polyster resin, moulded to 3mm thick frp laminated for forming hollow rails and style with suitable second class hardwood timber block inside at required places for fixing of fittings, cast molithically with 5mm thick frp laminated for panels including fixing to frames, complete all as specified and as directed by engineer in charge. 23 dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed 24 m&l for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and conforming to fe 410 w ( gde e 250 ) quality a complete all as specified and directed 25 s & fframed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting of other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel handing door fitttings ( exclusive or steel sheeting or other covering, running rails and guides ) and hanging also fastening and fixing confirming to fe 410 w ( gde e 250 ) complete all as specified and directed by engr in charge. 26 s&f 150mm long aluminium alloy handles, fabricated type, anodised complete all as specified & directed by engr in charge. 27 s&f aluminium anodised barrel tower bolt of extruded section 200mm longall as specified & directed by engr in charge. 28 s&ffor 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as directed. 29 s&f stainless steel wire cloth 0.63 nominal dia of wire and average width of aperture1.40 mm and fixed with stainless steel wire staplesall as directed. 30 s&f for powder coated aluminium frame / shutter for doors, windows, ventilators and aluminium partition with one or more rebates including jointing cleats glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete with locking arrangements for fixing with powder coating on aluminium sections, minimum thickness of poweder coating shall be 50 micron as per the specification. the top and bottom horizontal members and vertical members adjacent to wall shall be fixed with floor, ceiling, walls and cills where required and fixed with the help of rawl plugs and screws or with fixing clips or with expansion hold plate fastners. aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically whereever required complete in all respect all as specified & directed by engr in charge. make of al section : jindal / hindalco / nalco 31 s & f powder coatedaluminium door shutters, aluminium section weighing 0.55 kg / m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 03 nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed note : minmum thickness of powder coating should be 50 microns. 32 s&f for powder coated anodised aluminium window and ventilator shutters, side hung type without sash, aluminium sections weighing exc 0.55 kg / m ( 1.50 to1.80mm th ) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings suchas peg stays 150 mm long ( 01 no ) hinges type b 21 100 mm long ( 2 nos ) suitable handle ( 01 no ) in each window shutter and necessary accessary as required complete all as specified and directed by engineer in charge ( note : glass will measured and paid separately ) 33 s & f for aluminium anodised ( powder coated ) three track sliding window frame with shutters ( two glazed and one gauged shutter ) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete andglazing with 5 mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc with the following section of frame and shutter ( a ) sections for frame ( i ) top and verticals 92 x 29.50 x 1.30 mm thick ( ii ) bottom 92 x 29.50 x 1.20 mm thick. ( b ) sections for shutter ( i ) a section 39 x 20 x 1.50 mm thick ( ii ) interlock section 39 x 20 x 1.50 mm thick ( iii ) h section 41 x 20 x 1.10 mm thick make: jindal or equivalent sections of hindalco / nalco. 34 dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) and rubbish off the premises all as specified and as directed. 35 m&l for joint free non skid ceramic coloured tiles 7 to 8 mm thick ( square / rectengular ) area of each tile exc 0.11 sqm but not exc 0.18 sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floorall as specified and directed. 36 m&l glazed ceramic coloured tiles 450 x 300 x 7 mm thick joint less tiles as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar ( 1:4 ) including necessary cutting as per site requirement complete all as specified and directed 37 s & f virified ceramic tiles light colour 10 mm thick ( square / rectangular ) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick rendering in cm 1:6 complete all as specified and directed 38 s & f virified ceramic tiles light colour 10 mm thick ( square / rectangular ) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 1.25 sqm, as in dado / skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cm 1:4 complete all as specified and directed 39 dismantling stone slabs and tiles of any description or thickness in floors, aprons etc and laided, bedded and pointed in any mortar complete all as specified and directed. 40 m&l for 20 mm thick granite ( of any type ) work ( table rubbed and polished ) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar ( 1:4 ) including pointing in white cement ( 1:2 ) using marble dust with admixture of pigment to match with shade of granite over 20 mm thick screed bed in cm 1:6 completeall as specified and directed. 41 rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed 42 taking down cement plaster on brick / terrazoo on brick / stone walls including raking out joints, hacking for key, scrubbing down with waterall as directed 43 m&l for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:6 on wall and finished fair even and smooth without using extra cemnt all as specified and directed. 44 m&l for rendering 15mm thick on brickwork or concrete surfaces in cement mortar 1:4 on wall and finished fair even and smooth without using extra cemnt all as specified and directed. 45 m & l for rendering 10 mm thick on concrete surfaces in cm 1:4finished even and smooth on ceilingwithout using extra cementall as specified and directed by engr in charge. 46 m&l for preparation of newceiling surface and applyingtwo coats of acrylic distemperover a coat of primer complete all as specified and directed by engr in charge. 47 m&l for complete removal of existing treatment in old ceiling surfaces and appying two coat of acrylicdistemper ( any colour / tint ) on ceiling surface complete all as specified and directed by engr in charge. 48 m&l for applying two coats of acrylic distemper over a coat of primer over 3 mm thick wall care puttyon newly plastered surfacesof wallsincluding preparation of surfaces complete all as specified and directed by engr in charge. 49 m&l for complete removal of existing treatment from walls andapplying two coats of acrylic distemper over 3 mm thick wall care putty of wallsincluding preparation of surfaces complete all as specified and directed by engr in charge. 50 m&l preparing newly plastered of wall and applying three coats of white wash on wall complete all as specified & directed by engr in charge 51 m&l for preparation of new plastered surface of walls and applying two coats of cement base paint all as specified & directed by engr in charge. 52 m&l for applying two coats of weather proof exterior emulsion paint ( apex ultima or equivalent ) over a coat of alkali resistant primer over 3mm thick wall care putty on newly plastered surfacesof walls including preparation of surfaces complete all as specified and directed by engr in charge. 53 m&l for preparation of old plastered wall surface and treating with two coats of weather proof exterior emulsion paint ( apex ultima or equivalent ) over a coat of alkali resistant primer over 3mm thick wall care putty complete all as specified and directed by engineer in charge. 54 m & l for painting new / untreated steel and iron surfaces of any discription, over 10 cm width or girth, withtwo coats of synthetic enamel paint over coat of red oxide primer ordinary tint includingpreparation of new surfaces all as spefified and directed 55 m & l for painting oldsteel and iron surfaces of any discription, over 10 cm width or girth, withtwo coats of synthetic enamel paint ordinary tint includingpreparation of old surfaces all as spefified and directed 56 m&l preparation of new or previously untreated wooden based surface of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer all as specified. 57 s & f 4 mm thickfigured glass, pin head oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. 58 taking down pvc soil, waste& rain water pipe 100 / 75 mm dia including fittings fixed to walls, laid in floor etccomplete all as specified and directed by engr in charge. 59 s&f 110 mm dia bore pvc ( swr ) pipe, single socketed in any length with rubber ring joints fixed with clamps to wallsall as directed. 60 s&f 75 mm dia bore pvc swr pipe, single socketed in any length with rubber ring joints fixed with clamps to walls and including bend as per side requirement, taking down existing pipe all as directed. 61 s & f pvc ( swr ) bend 110 mm bore all as specified & directed by engr in charge 62 s & f pvc ( swr ) bend 75 mm bore with access door and radiusall as specified & directed by engr in charge 63 s & f 110 mm bore pvc ( swr ) branch piece double ( single y ) equal or unequal all as directed 64 s & f in repair 100 bore of spun cast, cast iron soil, waste and vent pipes in any length with or without ears, with cement joint and laid in trenches or in floors cast ironcomplete all as specified and directed. 65 s & f in repair 75 mm bore of spun cast, cast iron soil, waste and vent pipes in any length with or without ears, with cement joint and laid in trenches or in floors cast ironcomplete all as specified and directed. 66 s & f in repair cast iron 100 mm bore branch pieces, single ( equal or unequal ) , ordinary or inverted ( spigot or socket type ) or with parallel branchescomplete all as specified and directed. 67 s & f in repair cast iron 75 mm bore branch pieces, single ( equal or unequal ) , ordinary or inverted ( spigot or socket type ) or with parallel branchescomplete all as specified and directed. 68 s & f in repair cast iron 100 mm bore bends ( any radius ) , diminishing pieces or tapers ( larger bore measured ) complete all as specified and directed. 69 s & f in repair cast iron 75 mm bore bends ( any radius ) , diminishing pieces or tapers ( larger bore measured ) complete all as specified and directed. 70 m & l in repairscast iron floor trap dia of out let 75 mm, with grating including jointing to waste pipe fixed in cement concrete type b 1, ( 1:2:4 ) complete all as specified and directed by engineer in charge. 71 m & l pvc ( swr ) gully trap 125 / 110 mm, setting and jointing with solvent cementcomplete all as specified and directed by engineer in charge. 72 taking down 15 mm dia steel gi tubing including all connected fittings of any dia and in any positionall as directed. 73 all as per item no 72 above but 20 mm dia pipe 74 all as per item no 72 above but 25 mm dia pipe 75 s&f 15 mm diagalvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etcfixed to walls / ceiling complete all as directed. 76 all as per item no 75 above but fixing only 77 all as per item no75above but 20 mm dia pipe 78 all as per item no 75 above but 25 mm dia pipe 79 s&f in repair bib tap 15mm bore cast copper alloy chromium plated long body fancy type with capston head and cup screwed down, hand operated, screwed for iron pipe or for brass ferrule all as specified. 80 s&f in repair cp brass stop valve / angle valve fancy type 15 mm bore cast copper alloy screwed down high pressure fancy typefixed complete all as specified and directed by engr in charge. 81 s&f in repair cp brass stop valve / angle valve fancy type 15 mm bore cast copper alloy screwed down high pressure fancy type with long shank and cup ( concealed type ) fixed complete all as specified and directed by engr in charge. 82 s & f in repair brass chromium plated liquid soap dispenser complete all as specified and as directed by engineer in charge. 83 s&f in repair gun metal globe or gate valve 25 mm bore with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed by engineer in charge. 84 s&f in repair gun metal globe or gate valve of 20 mm bore with iron wheel head, screwed both ends for iron pipe and fixedall as specified and as approved by ge / engineer in charge. 85 m & l for 19 mm thick plywood fixed in repair, grade bwr, type bb, with decorative face veneers on both faces; handle and fixed with screws to timber frame work complete all as specified and directed 86 s & f continuous ( piano ) hinges mild steel bright finsh or electro galvanised, width of flap when open 30mm complete all as specified and directed by engr in charge. 87 s&f drapery stainless steel rods, standarad quality, not less than 25 / 28 mm dia with heads, brackets and boths ends stainless caps , etc. all as specified and direced. 88 s&f in repairvitreous china squatting pan orissa pattern size 580 x 440 mm white with integral foot rests ( excl flushing cistern ) but including ci p trap set in cement concrete fixed all as specified. 89 s & f in repair cabinet mirror of size 400mm x 500 mm fixed with wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by engineer in charge 90 s&f in repair looking mirror of selected quality on size600 mm x 450 mm withbevelled edge mounted 6 mm thick commercial plywood and aluminium channel of required size fixed to pvc plugs with chromium plated brass screws and cup washers all as directed. 91 s&fin repairtubular towel rail stainless steel20mm dia d type 60cm long between flanges complete all as spd & dir by eic. 92 s & f in repair corner glass shelf 200 mm with abs brackets complete all as specified and directed by engineer in charge 93 s&f in repair chromium plated fancy type soap dish complete all as specified and directed 94 s&f in repair vitreous china wash down water closet pan ( pedestral pattern ) , white ( excluding fixing bolts , flushing cistern and flush pipe ) , including connection to drain ( or outgoing pipe ) and to flushing pipe, antisyphonage pipe, etccomplete. 95 s&f in repair vitreous china wash hand basin coloured counter flat back of size 550x400mm, long screwed shank fly nut flangeend including cutting for and pinning in ends of brackets in 1:3 cm including 32mm dia chromium plated waste coupling / trap all as specified . 96 s&f in repair vitreous china wash hand basin coloured counter top ( bowl type / oval shape ) of size 560x450mm, long screwed shank fly nut flangeend including cutting for and pinning in ends of brackets in 1:3 cm including 32mm dia chromium plated waste coupling / trap all as specified . 97 s&f in repairs grating doom cp 100 mm diawith waste hole complete all as specified and directed 98 s&f in repair stainless steel trap with grating round or square 150mm size ( minimum weight 100gms ) complete all as specified and as directed by engineer in charge. 99 s & f in repairs 32 mm pvc waste down pipe suitable for whb and urinal complete all as specified and directed by engineer in charge 100 supply and fixing in repair hot and cold whb mixer cast copper alloy chromium plated quarter turn screwed down for pipe of15mm bore complete all as specified and directed by engineer in charge 101 s & f in repairwall mixer with l bend 115 mm long full system brass ( cast copper alloy ) chromium plated, mixer for mixing hot & cold water, screwed down for iron pipe 15 mm borecomplete all as specified and as directed by engineer in charge 102 s&f in repair health faucet with cp flexible cord fixed on wall complete all as specified and directed by engneer in charge 103 s&f in repairs pvc valve less, syphonic action type flushing cistern, 10 ltrs capacitylow level, white, with inlet ball valve, float, handle, and connection to pipesand flush pipe of polyethylene of low or high density or pvc, 32mm dia, for low level cistern all as directed. 104 s&f in repair cp towel ring of size 150 mm decorative type fixed with walls complete all as specified and directed by engneer in charge 105 s&fin repair pvc connections 15 mm size with ptmt nuts of length 450 mm long all as directed. 106 s&f in repair, shower rose, 125 mm size, brass chromium plated withsweivel joint complete all as specified and directed by engr in charge. 107 m&l for 75 mm thick pcc 1:3:6 type c 2 using 40 mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as directed. 108 dismantling water tank exc 250 but n. exc. 500 litre capacity any type and remove from sitecomplete all as specified and directed by engineer in charge. 109 dismantlingwater tank exc 500 but n. exc. 1000 litre capacity any typeand remove from sitecomplete all as specified and directed by engineer in charge. 110 s&f for rotational moulded polythene water storage tank 500 ltr capacity vertical with closed top hoisted and fixed in position all as specified in ssr part i complete all as specified and directed by engineer in charge. . 111 s&f for rotational moulded polythene water storage tank 1000 ltr capacity vertical with closed top hoisted and fixed in position all as specified in ssr part i complete all as specified and directed by engineer in charge. . 112 s&fin repairs20 mm ball valves high pressure of ptmt with epoxy coated aluminium rod & high density plastic bal screwed for iron pipe and fixed. ( minimum weight 15mm 142 gms / 20mm 210 gms / 25mm 455gms ) 113 s&f for tmt bars ( fe 500d ) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips all as specified and directed. 114 demolition of cement concrete in ground floor and paving n.exc 15cm in thickness ( below or above ground level ) all as specified. 115 m&l for 75 mm thick pcc ( 1:3:6 ) type c2 using 40mm graded stone aggregate as in sub base below floors all specified and directed. 116 m&l pre cast pcc 1:2:4 type b 1, using ( 20mm graded stone aggregate ) as in kerb stone size 300 mm x 300 mm x 100 mm with plain fair face, including chamfers, weathering, throating etc setting in cm 1:4 complete all as specified and directed. 117 m&l machined pressed precast concrete interlocking paver block glossy with grey cementand pigment, any shape and size confirming to is 15658 2006 of 60mm thickness m 35 grade with over fazilka sand cushion all as specified and directed. ( sand will be measured and paid seperatly ) 118 suply onlyfine aggregate ( sand ) for cushioning ( fazilka sand ) all as specified and directed 119 m & l plain cement concrete type b 2 1:2:4 using 20 mm graded stone aggregate as in 40 mm thick flooring finished surfaces even and smooth without using extra cement complete for all as specified and directed 120 dismantling asbestos cement ( corrugated, semicorrugated, etc. ) sheets in roof coverings all as directed. 121 s & f pre painted galvatume aluminum zinc coating gi based corrugated / semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified 122 s & f pre painted galvatume aluminum zinc coating gi based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified 123 excavation in trenches n.exc. 1.5m wide and n.exc 1.50 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 sqm on plan and n.exc 1.5 m in depth and getting out in getting out in sof / loose soil all as directed. 124 removal of excavated surplus spoil to a distance n.exc 50m and deposting where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed by engineer in chargeq 125 returning, filling in, including spreading levelling including watering & well ramming in layers n. exc 25 cm any type of soil complete all as specified and directed by engineer in charge 126 s & f for 2 mm thick fibre glass reinforced translucent plain sheeting with 15 cm side lap fixed with coach screw and washer in roof, wall etc 127 m&l for pcc 1:2:4 type b1 using20mm graded aggregates as in benching / haunching ofmanholes including forming channels including necessary formwork etc. 128 m&l for pcc 1:2:4 type b1 using20mm graded aggregates as in coping and the like including weathering slightly rounded or chamfered angles and throating, as directed including necessary formwork etc. 129 m&l precast cement concrete 1:2:4 type b1 using 20mm graded stone aggregate and set cement mortar 1:6 as in cover slabs ( for manholes etc ) , chajjas, shelves and similar articles with plain faces all as directed 130 m&l moorum / red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed by engr in charge. 131 supply and laying dwcpe ( sn8 ) 150 ( id ) mm diameter drain pipes as per is 16098 ( part ii ) , laid in trenchesand including over 100 mm moorumbed to required slope, including all accessories / fittings, jointing and tested complete all as specified and as directed by engineer in charge. note:dwcpe pipe should be isi marked as approved by engr in charge. 132 dismantling wall and ceiling boards ( fibre, pulp, insulation etc ) or insulation boards / slabs / blankets of any thickness including cover fillets complete all as specified and directed. 133 s&f armstrong mineral fiber accoustical suspended ceiling system with anf ( micro look ) ege tiles with arm strong silhouette exposed grid. the tiles should have humidity resistance ( rh ) of 90%. nrc 0.5%. light reflectance shall be more than 85% thermal conductivity k=0.052 0.057 w / mk. colour shall be white, fire perfomance class 0 / class 1 ( bs 4760 in module size of 600mmx600mmx15mm with bioblock coating on the face of tiles. suitable for green building application with recycle content of 63% the tiles shall be laid on arm strong silhouette profile grid system with 15mm with flanges incorporating 6mm central revel in white / black colour and with a web height of 45mm and and load carrying capacity of minimum 15.68kg / sqm.silhouette , main runner and cross runner shall have mitred end and birdsmouth notches to provides mitred juction. the tee section hace a galvanised of 125gms / sqm complate all as specified and directed by engineer in charge. 134 dismantling timber scantling 40 sq cm and over in section framed work, in any position 135 s&f for 4.8 mm thick sheet glass, ordinary quality and glazing with aluminium snap beading of any size of glass in each pane with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufactuers complete all as specified & directed. ( aluminium snap beading & neoprene gasket / rubber packing not included in this items 136 s & f powder coated standard aluminium anodised grill size of mesh 75 mm x 75 mm and 8 mm thick section using u channel 25 x 12 mm all as specified and directed. 137 s & f 4 lever brass body mortice lock, vertical type, size 100 mm complete all as specified and directed. 138 s & f door closer aluminium ( die cast ) body hydraulically regulated designation no 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed 139 e / m portiontaking down carefully copper / aluminium point wiring ( light, socket or power ) complete ( fittings such as switches, ceiling roses, pendants, regulatos, sockets etc to be measured separately ) , and making good disturbed surfaces of walls, floors etc to match with existing surfaces. 140 taking down mcb with sheet metal enclosure, main switch, db, etc and making good disturbed surfaces to match with existing surfaces. 141 taking down sub main wiring of any size / capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces 142 m&l for concealed point wiringfor one light point controlled by one, oneway switch with single core pvc insulate, unsheathed multistranded copper conductorcable of size 1.5 sq.mm ( frls ) drawn in and including electrical grade pvc conduit20 mm dia concealed on wall / ceiling / floorincluding pvc insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm ( frls ) including ms shunk sheet metal box with 3 mm thick bakelite plastic laminated sheet top cover with brass counter shunk screws with washercomplete all as specified. note quoted rate shall include making good to the disturbed surfaces including plastering andpaintingto match with the existing colour. 143 , ditto all as per serial item no 143 above, but for one ceiling / exhaust fan point controlled by one switch and regulator complete all as specified and directed by engr in charge. 144 , ditto all as per serial item no 143 above, but for one bell / buzzer point controlled by one bell puch complete all as specified and directed by engr in charge. 145 , ditto all as per serial item no 143 above, but for one 3 pin 5 amps switch socketon same board with other switches complete all as specified and directed by engr in charge. 146 , ditto all as per serial item no 143 above, but for one 3 pin 5 amps switch socket outlet point on independent board complete all as specified and directed by engr in charge. 147 , ditto all as per item no.143above but point wiring with 4 sqmm multi stranded conductor cable and 2.5 sqmm unsheathedcopper conductor earth wire for two in one 5 pin 15 amp socket outlet on indep board. 148 supply and fix switch, piano type, single pole, one way 5 / 6 amp rating 230 / 250 volts grade on top covers ( catered in point wiring above ) 149 supply and fix piano socket 2 in 1, 2 / 3 pin 6 amp flush type 250 volts ac complet all as specified and as directed 150 supply and fix piano socket 2 in 1, 3 pin 5 amp and 15 amp flush type 240 volts ac complet all as specified and as directed 151 supply and fix piano swith 15 amp flush type 240 volts ac complet all as specified and as directed 152 s & f led light fitting 1 x 20 w, 230 v integral sleek polycarbonate led channel with white acrylic cover incl making connection complete. 153 s & f led 2 x 2 flat panels to enhance the delight of occupants with fittings recess mounting complete all as specified and as directed. 154 supply and fix lamp holder insulated body with back plate for angle / batten fitting with ledof 09 watt complete all as specified and as directed. 155 supply & fixingbell push switch 6a, all as specified and directed by engineer in charge 156 supply and fix bell ac 230 vott single pole complete all as specified and directed 157 supply and fix ceiling rose surface bakelite two to three terminals / plate 5 amps complete all as specified and directed by engr in charge. 158 supply and fix fan regulator electronic solid state with steps suitable for 1200 / 1400mm sweep ceiling fan working on 230 volt ac complete all as specified and directed 159 supply and fix verticle mcb db tpn 415 volts 4 way with 200 amps bus capacity double door incl fixing on wooden board or recessed on wall complete all as specified and as directed 160 supply and fix sheet metal enclosure db single pole and neutral for 240 volts 8 way double door with 200 amps rated busbarflush / surface mounting double door complete all as specified and directed 161 supply and fix mcb sp 240 volt 5 32 amp 10ka complete all as specified and as directed. 162 supply and fix mcb sp & n240 volt 5 32 amp 10ka complete all as specified and as directed. 163 supply and fix mcb sp240 volt 40 amp 10ka complete all as specified and as directed. 164 supply and fixing pvc blanking plates one way with internal lock complete all as specified and as directed. 165 material & labour for sub main wiring with two run single core 6 sqmm pvc insulated unsheathed ( frls ) cable with stranded copper conductor drawn in pvc conduit & accessories suitable size with and including 6 sqmm copper green colour earth wire all as specified and directed by engineer in charge.note two run of 6 sq.mm & one run of 4 sq.mm & one run of pvc conduit with accessories shall be measured as one length. 166 m&l for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead ofgi wire 4 mm dia ( 8 swg ) by means of bolts, nuts and washers of the earth wire.galvanised iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm dia and water pipe 20mm dia gi light grade with funnel and wire mesh, pcc chamber in cement concrete ( 1:2:4 ) type b 1and ci cover with frame all as shown in electrical plate no. 3 of mes schedule part i of ssr 2009. notes : ( i ) 20 mm dia gi pipe for watering to be provided with a socket and plug and should be 10 cms above ground level. ( ii ) outer edge of earth pit will be 1 metre away from the outer edge of pcc chamber. ( ii ) gi wire upto dbs earth connection is included in this item. ( iii ) water pipe shall be provided in slanting position 167 supply and fix sheet metal enclosure db single pole and neutral for 240 volts 8 way with 200 amps rated busbarflush / surface mounting double door complete all as specified and directed 168 note: the contract sum shall be calculated by deducting the amount shown in credit schedule attached to this tender, from total amount of schedule a / boq...
9
Indian Army - Rajasthan
39176417 bids are invited for campniv 39 j2 campniv 39 container water 20 ltr aluminum alloy 8340 000488 j1 8340 000488 pin iron for tent 457 mm 5120 001442 j1 5120 001442 shovel hand round nose 1.6 kg. 7105 000021 j 1 7105 000021 stool camp mark 1 7240 000023 j2 7240 000023 funnel filling oil cooker mk 1 total quantity : 533...
10
Indian Army - Rajasthan
38983773 bids are invited for 1 j2 campniv 39 container water 20 ltr alluminium alloy 2 j1 8340 000488 pin iron for tent 457 mm 3 j1 5120 001442 shovel hand round nose 1.6 kg. 4 j 1 7105 000021 stool camp mark 1 5 j2 7240 000023 funnel filling oil cooker mk 1 total quantity : 533...
11
Military Engineer Services - Rajasthan
38911722 tender for welcome maintenance of offers married accommodation in central area at ge nasirabad. 1 m & l for preparation of old plastered or unplastered surfaces of wall including cornices etc applying one coat of white wash complete all as specified and directed. 2 all as per srl item no 1.00 here in before but one coat of white wash on ceiling 3 m & l for washing rubbing down and stopping distempered surfaces of wall and applying one coat of oil bound distemper white or tinted complete all as specified and directed. 4 m & l for complete removal of existing treatment of old plastered surface of wall andapplying two coats of oil bound distemper over a coat of 1mm thick putty ( jk / birla ) complete all as specified and directed. 5 m&l for preparation of old surface of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint ( 1st quality ) complete all as specified and directed. 6 m&l for preparation of old surface of steel or iron based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint ( 1st quality ) complete all as specified and directed. 7 m & l for washing rubbing down and stopping of old painted surfaces, removing nails, making good holes, cracks etc and applying one coat of cement base paint complete all as specified and directed. 8 m & l for complete removal of existing treatment and applying two coats of weather proof acrylic emulsion paint over a coat of 1mm thick wall care putty including a coat of emulsion wall primer all as per manufactures instructions complete all as specified and directed.make : asian, apex and berger or equivalent as approved by ge 9 m & l for complete removal of existing treatment of oldsurface of manglore tiles and applying two coats of terracotta roof paint complete all as specified and directed. make : apex / berger 10 taking down cement or cement lime plaster from stone / brick wall, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. 11 dismantling floor, hearth or wall tiles including cement mortar and rubbish off the premises, complete all as specified and directed. 12 demolition of brick / stone masonry built in cement or cement lime mortar in any description complete all as specified and directed. 13 demolition of cement concrete ( unreinforced ) in floors and paving n.exc 15cm thickness ( above or below ground level ) complete all as specified and directed. 14 hacking out old broken glass ( any thickness, size quality or description ) from metal frame including punching or drilling out old glazing, pins, spring clips & providing & fixing new ones and s&f 3.00 mm thick sheet glass, ordinary quality & glazing with oil putty not exc0.50 sqm each pane complete all as spd & directed. 15 hacking out old broken glass ( any thickness, size quality or description ) from metal frame including punching or drilling out old glazing, pins, spring clips & providing & fixing new ones and s&f 3.00 mm thick figured glass, ordinary quality & glazing with oil putty not exc0.50 sqm each pane complete all as spd & directed. 16 taking down chowkhats or frames with shutters ( without taking off shutters from the frames ) n. exc 1.50 sqm each and removing from site complete all as spd & directed and making good disturbed surface of walls in cement mortar ( 1:3 ) complete all as specified and directed. 17 taking down chowkhats or frames with shutters ( without taking off shutters from the frames ) exc 1.50 sqm and n.exc 4.00 sqm each and removing from site complete and making good disturbed surfaces of wall in cm ( 1:3 ) complete all as specified and directed. 18 taking down shutters of any description exc 1 sqm and n.exc 2 sqm each leaf and removing from site complete all as specified and directed 19 m & l for rendering 15mm thick in cm ( 1:6 ) on stone masonry surfaces wall finished even and smooth without using extra cement or surface other than fair face of brick work or on one side of lathing complete all as specified and directed. 20 m & l for rendering 10mm thick in cm ( 1:3 ) on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed. 21 m & l for 15mm thick rendering in cm ( 1:4 ) on brick / concrete surface mixed with water proofing compound @ 3% by weight of cement & surface fair and even complete all as specified & directed. note : wpc will be measured and paid separately 22 m & l for 15 mm thickrough cast plaster mix with crusted stone ( 6 10 mm ) , sand and cement in the ratio 1:1:1 , over 10 mm thick rendering in cm 1:4 as in under coat including dubbing coat ( if required ) complete all as specified and directed. 23 m&l for stone walling of random rubble, uncoursed, well bonded, bedded & solidly hearted, built in cm ( 1:6 ) complete all as specified and directed. 24 all as per sl item no 23.00 here in before but except stones.note: old servieable stones retrieved vide sl item no 12.00 shall be reused. 25 m & l for brick work with fly ash bricks, straight or curved on planto any radius, in half brick thick wall built in cm 1:4 complete all as specified and directed. 26 m & l for brickwork with fly ash bricks, old size, straight or curved on plan exc 6 m mean radius, built in cm 1:6complete all as specified anddirected. 27 dismantling loose / disintegrated portion of rcc chajjas bends shelves, beams balconies and similar work at any position or any height and dubbing out with pcc ( 1:1.5:3 ) , 15mm to 50mm thick using 6 to12mm graded stone aggregate to make up and finished to required shape including applying anti corrosive paint on exposed surface of reinforcement, provision of necessarysupports, form work and 10mm thick plastering in cm ( 1:4 ) finished fair and even complete all as specified and directed. 28 m&l 25mm thick pcc ( 1:2:4 ) type b 0 using 12.5mm graded stone aggregate as in floorcomplete all as specified and directed. 29 m & l for non skid ceramic coloured tiles ( joint free ) , 7 to 8 mm thick ( square / rectangular ) , area of each tile exc 0.18 sqmbut not exc 0.38 sqmin floors etc set and jointed in neat cement slurryand pointed inwhite cement mixed with pigments to match the shade of tile laid over and including screed bed 15 mm thick in cm ( 1:6 ) complete all as specified and directed. 30 m & l for non skid ceramic coloured tiles ( joint free ) , 7 to 8 mm thick ( square / rectangular ) , area of each tile exc 0.11 sqmbut not exc 0.18 sqmin floors etc set and jointed in neat cement slurryand pointed inwhite cement mixed with pigments to match the shade of tile laid over and including screed bed 15 mm thick in cm ( 1:6 ) complete all as specified and directed. 31 m & l for vitrified ceramic tiles light shade 10mm thick ( square / rectangular ) polished area of each tiles exc. 0.18 sqm but n.exc 0.36sqm in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tile laid over and including screed bed 15mm thick in cm ( 1:6 ) complete all as specified and directed. 32 all as per sl item no 31.00 here in before but on vertical surfaces of stone wall such as dados, skirting etc set& jointed in neat slurry and pointed inwhite cement mixed with pigments to match the shade of tile over & including 10 mm thick screed plaster in cm 1:4 complete all as specified and directed. 33 m & l for glazed ceramic coloured tiles, 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces of wall such as dados, skirtingsetc set and jointed in neat cement slurry and pointedin white cement mixed with pigments to match with the shade of tile over and including 10mm thick screed plaster in cm ( 1:4 ) complete all as specified and directed. 34 all as per sl item no 29.00 here in before but on vertical surfaces of stone wall such as dados, skirting etc set& jointed in neat slurry and pointed inwhite cement mixed with pigments to match the shade of tile over & including 10 mm thick screed plaster in cm 1:4 complete all as specified and directed. 35 m&l for 16 18 mm thick granite ( of any type ) work ( table rubbed and polished ) in steps, jambs, pillars, window cills, cooking platform and like set & jointed in neat cement slurry & pointed in white cement ( 1:2 ) using marble dust with admixture of pigment to match with shade of granite including rounding the exposed edgeslaid over & including 15mm thick screed bed in cm ( 1:6 ) complete all as specified and directed. 36 m & l for rolled mild steel work angle iron ( 40x40x6mm ) as in door frame ( chowkhats ) including provn of 10mm dia deformed bar welded horizontally to bottom of frame confirming to fe 210 gde e 165 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed 37 s & f second class hw ( hollock / bansum / sal ) , plain, solid, straight, chowkhats & frames, wrought, framed, rebated on the solid, rounded or chamfered, put together glue pinned at joints complete all as specified and directed. 38 s & f hold fast of flat iron 25x6mm conforming to fe 210 gde e 165including preparing the surfaces & treated with coaltar & sanded with clean sharp sand complete all as specified & directed 39 raking out joints / pointing to random rubble or polygonal rubble stone masonry uncoursed or brought upto courses built in cm and m & l for raised pointing in cement mortar ( 1:4 ) complete all as specified and directed. 40 taking down shutters of any description exc 1 sqm and n.exc 2 sqm each leaf& refixing in the same opening after necessary resecuring or easing & adjusting etccomplete all asspecified and directed. 41 taking down shutters of any description exc 2 sqm each leaf& refixing in the same opening after necessary resecuring or easing & adjusting etc complete all asspecified and directed. 42 s & f 30mm thick flush shuttersolid core construction with block board core and ply wood face panels with commercial face on both sides including 6mm thick iind class hard wood lipping on edges complete all as specified and directed. 43 s & f second class hw hollock / bansum / sal, 35 mm thick, glazed and skeleton shutters, factory made open rebated ( three panels ) and prepare to receive glass, gauge etc without sash bar, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. size of members of shutter shall be as specified in ssr part i, section 8 clause 8.24 ( a ) member shall be kiln seasoned & chemically pressure treated complete all as specified and directed. 44 s&f factory made pvc solid frame of size 50mmx47mm made out of 5mm prelam pvc sheet & edges will be painted to match with prelam sheet reinforced with m.s. square tube and fixing in opening as per specification & drawing as perssr 2020 complete all as specified and directed. 45 s & f factory made solidpvc mouldeddoor shutter with wood free eps, 28 to 30mm thick, ( styles ) with 2 raised panel design with 2mm thick moulded prelaminated pvc sheeton front face & 2mm thick plain colour pvc sheet on back face, and fixing in the frame at site as per specification and drawings on page 161 of ssr ( part ii ) 2020 complete all as specified and directed. 46 s & f in repair steel window / ventilator factory made, made out of ms hollow section 79mmx39mmx1.6mm thick frame with double shutters ( glazed & wire gauge shutters ) made out of z section using flush butt welding & tenon riveting all as per is 1038 / 83, dobby hinges shall be provided to both shutters. locking arrangements as per sample approved by ge, provided with knob, 10mm ms square bars in grills, z section handle 100mm sized & 150mm long hook & eye welded to frame & shutter, four nos lugs welded to frame including necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fasts and making good in pcc 1:2:4 type b 1 including preparation of surfaces & applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed.note : wire mesh and sheet glass shall be measured & paid separately under respective items. 47 taking down of old boards and s & f 18 / 19mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination, fixed with screws including teak wood lipping 19 x 6mm thick fixed with nails in shelves, partition and palmet boxes, shelves, almirah book cases, toilet boxes, racks, cup board shutter and similar works complete all as spepcified and directed. 48 s & f aluminium alloy, anodised sliding door bolt, 300mm long, isi marked, with hasp and staple ( bolt type ) and fixing bolts and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed. 49 s & f in repairs aluminium alloy, anodised sliding door bolt, 300mm long, isi marked, with hasp and staple ( bolt type ) and fixing bolts and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed. 50 s&f mild steel butt hinges, medium weight, cold rolled, isi marked of size 125 mm complete all as specified and directed. 51 s&f in repairs mild steel butt hinges, medium weight, cold rolled, isi marked of size 125 mm including necessary welding work etc complete all as specified and directed. 52 s&f aluminium, anodised, barrel tower bolt of extruded section, isi marked, 150 mm long complete all as specified and directed. 53 s&f in repairs aluminium, anodised, barrel tower bolt of extruded section, isi marked, 150 mm long complete all as specified and directed. 54 s&f 150 mm long extruded aluminium alloy handle fabricated type anodized complete all as specified & directed. 55 s&f in repairs 150 mm long extruded aluminium alloy handle fabricated type anodized complete all as specified & directed. 56 s & f stainless steel wire cloth0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed 57 s & f in repairs stainless steel wire cloth0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed 58 s & f in repairs floor door stopper aluminium alloy body & tongue of size 140mm, anodised with hard drawn spring, fixed in door, over all length of cover plate of complete all as specified and directed. 59 taking down the existing material and s&f 300 mm rat tail rod mild steel ordianarypattern springs including roller and roller plate complete all as specified and directed. 60 s & f in repairs 100mm size hasp and staple, aluminium anodised, safety type including bolt to hinge plate complete all as specified and directed 61 s & f in reapirs25mm dia ms chromium plated curtain rod powder coated tubular, fancy type, complete all as specified and directed. 62 s&f in reapirs ms chromium plated powder colour coated, decorative type knobs with bracket fixed at end of pelmet rod suitable for 25mm dia complete all as specified and directed. 63 dismantling of exisiting unserviceable rcc / pvc water tank of capacity not exceeding 500 litre each s&f 500 litre capacity rotational moulded polyethylene water storage tanks double layered ( cylindrical vertical with closed top ) isi marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in ssr part i. 64 dismantling of exisiting unserviceable rcc / pvc water tank of capacity not exceeding exc 500 but n. exc 1000 litre each s&f 1000 litre capacity rotational moulded polyethylene water storage tanks double layered ( cylindrical vertical with closed top ) isi marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in ssr part i. 65 taking out old unserviceable water closet ( squatt pattern ) and s & f vitreous china, squatting panorissa pattern size 580x440mm, white with integral foot rests ( excluding flushing cistern and flush pipe ) with chinaware ‘p’ or ‘s’ trap, front or back inletincluding connection to trap and to flushing pipe, anti syphonage pipe and making good the floor to match the existing completeall as specified and directed. 66 taking out old unserviceable water closet and s & f vitreous china wash down closet pan ( pedestal pattern ) , white, including plastic cover white closed pattern whith flat bottom and mild steel chromium plated / pvc hinge device including connections to drain ( or outgoing pipe ) and to flushing pipe, anti syphonage pipe etc complete all as specified and directed. 67 taking down old unserviceable whb and s&f vitreous china, white, wash hand basin flatback of size 550 x 400mm complete all as specified and directed 68 demolition of cement concrete ( unreinforced ) in any position & of any description from sunken floor ( ground or 1st floor ) and removing and depositing materials exc 50mtrs level not exc. 1.5m above the starting point complete all as specified and directed. 69 m & l for cement concrete 1:5:10 type e2 using 40mm graded stone aggregate as in sunken floors filling and mass concrete complete all as specified and directed. 70 m&l 20mm thick cement plaster in cm 1:4 mixed with water proofing compound @ 3% and applying water proffing treatment on sunken portion with acrylic based polymer modified cementitious composit compound as specified and approved & cement slurry two layers, 1st layer @ 0.488 kg / sqm mixed with composit compound @ 0.253 kg / sqm & the second layer slurry @ 0.242 kg / sqm mixed 0.126 kg of compound complete with min 4 hours allowed to air cure between these layers and applying 200 polyflim with adhesive complete all as specified and directed. 71 m&l for 50mm thick pcc ( 1:3:6 ) type c 1 using 20mm graded stone aggregate as in plinth protection finished fair and even laid in alternatebays n.exc 2m in length and joints filled with bitumen mastic 1:3 ( 1 bitumen :3 sand ) complete all as specified and directed. 72 s & f in repair pvc valve less, syphonic action type flushing cistern, isi marked, 10 litre capacity, low level, white / ivory colour, with inlet, ball valve, float, handle fixed with pvc rawl plug of suitable size complete all as specified and directed. 73 s & f in repair pvc flush pipe of approved quality 32 mm bore, for low level flushing cistern complete all as specified and directed. 74 s & f in repair brass chromium plated shower rose of 100mm size with swivel joints, including fixing to steel pipe or union complete all as specified and directed. 75 taking down old unserviceable pvc connectionand s & f pvc connection, heavy duty 15 mm bore, 45 cm long with two nos ptmt nuts at both ends of approved quality complete all as specified and directed 76 s&f in repair pillar tap, 15mm bore, cast copper alloy, chromium plated, isi marked, screwed down high pressure with or without lettred hot or cold with long screw shanks and fly nuts screwed for iron pipe complete all as specified and directed 77 s&f in repair stop / angle valve 15mm bore cast copper alloy, chromium plated, isi marked with long crutch or butterfly handle screwed down high pressure screwed both ends for iron pipe complete all as specified & directed. 78 s&f in repairs 25mm bore gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipes and fixed all as directed. 79 taking down old unserviceable waste pipe and s&f 32mm bore pvc waste pipe of 75mm length with oneend socketed complete all as specified and directed. 80 s & f in repairs grating square / round 140mm size of ptmt with centre hole movable or side hole for fix to waste pipe ( minimum weight 50 gms ) complete all as specified and directed. 81 s & f in repairs 15 mm bore bib taps standard of ptmt any colour, screwed for iron pipe and fixed complete all as specified and directed. 82 taking down old unserviceable water closet seat cover & s&f plastic water closet seat cover, white, closed pattern with flat bottom and cover & mild steel chromium plated or aluminised hinging device complete all as specified and directed. 83 taking down old unserviceable kitchen sink and s&fkitchen sink with drainage board overall size not less than 915x460mm, bowl size 410x 330x160mm made of stainless steel 1.00 mm thick with plugs, washers and waste including fixing cantilever brackets and connecting union complete all as specified and directed.note : minor variation in dimension + 20mm as per standard catalogue of manufacturer may be approval of ge in writing without price adjustment. 84 s & f in repairs stainless steel plate rack made of 0.50mm thick of over all size914mm x 609 mm x 255 mm and weight not less than 7.00 kg each of approved quality complete all as specified and directed.note : minor variation in dimension may be permitted as per standard manufacturing models of manufacturer without price adjustment with prior approval of ge but weight shall not be less than 7.00 kgs. 85 s & f waste coupling cp 32mm dia for glazed ware basins etc with long screwed shanks and fly nuts flanged etc complete all as specified and directed. 86 s & f in repair bib taps isi marked, cast copper alloy, chromium plated, isi marked with crutchor butterfly handle, screwed down, screwed for iron pipeor for brass ferrule and fixed for 15 mm boreof pipe complete all as specified and directed. 87 s & f in repair pvc ( swr ) floor trap with grating 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed. 88 taking down old unserviceable mirror and s & f looking mirror of size 600 mm x 450 mm x 5.5mm thickof selected quality, mounted on pvc frame and fixed to and including wooden plugs with chromium plated brass screwswasher cup washer complete all as specified and directed. 89 s & f in repair tubular towel rail, chromium plated brass 20mm dia ‘d’ type 60cm long between flanges complete all as specified and directed. 90 s & f in repair for toilet fittings chromium coated towel rack 600mm long without lower haners but three hookscomplete all as specified and directed. 91 s & f in repair brass wall mixer 15mm bore cast copper alloy chlromium plated wall each mixer with hot and cold water with crutch handlecomplete all as specified and directed. 92 s & f in repair for toilet fittings corner glass shelf with bracket complete all as specified and directed. 93 s & f in repair for toilet fittings wall mixer ( wall mounted model ) with teliphonic shower rose complete all as specified and directed. 94 s & f in repair for toilet fittings wall teliphonic shower with 1.5 mtr long flexible tube & swivel wall hookcomplete all as specified and directed. 95 s & f in repair for toilet fittings health faucet with 1.2mtr long flexible tube & swivel wall hook complete all as specified and directed. 96 s & f in repair for pvc cabinet of size 422mm x 622mm with mirror of good quality with shelves in bath fixed complete to wallscomplete all as specified and directed.make : prayag cat no. 555 or make and model are equivalent as approved by ge. 97 s & f in repair for toilet fittings two way bib cock of 15mm bore complete all as specified and directed. 98 taking up or down steel tubing and connection 15mm bore keeping aside for reuse or removingto store complete all as specified and directed. 99 all as per srl item no 98.00 here in before but 20mm bore 100 all as per srl item no 98.00 here in before but 25mm bore 101 supply and fix mild steel water tubing 15 mm dia galvanised medium grade including all fittings ( such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc ) and fixed to walls / ceilings / laid on floors including testing complete all as specified and as directed. 102 all as per srl item no 101.00 here in before but 20mm bore 103 all as per srl item no 101.00 here in before but 25mm bore 104 refixing only 15mm bore old gi tubing to walls, ceiling or laid on floor including necessary cleanig, cutting, screwing and new fittings such as elbow, tee, union, socket, reducer etc complete all as specified and directed. 105 all as per srl item no 104.00 here in before but 20mm bore 106 all as per srl item no 104.00 here in before but 25mm bore 107 supply only liquid water proofing compound, isi marked complete all as specified & directed 108 m&l in repairs for 2nd class hard wood plain fillets, square , rectangular or triangular area exec. 6 sqcm but n. exec 13 sqcm in sectional, clean sawn, secured with nails complete all as specified and directed. 109 s & f in repairs 75mm bore pvc ( swr ) pipe single socketed in any length with rubber ring joints fixed to wall isi mark, complete all as specified and directed. 110 s & f in repairs 110mm bore pvc ( swr ) pipe single socketed in any length with rubber ring joints fixed to wall isi mark, complete all as specified and directed. 111 s & f in repairs 75mm bore pvc ( swr ) bend / shoe with oval access door of any radius complete all as specified and directed. 112 s & f in repairs 110mm bore pvc ( swr ) bend / shoe with oval access door of any radius complete all as specified and directed. 113 s&fin repair 75mm bore pvc ( swr ) junction single ( single t ) equal or unequal complete all as specified and directed. 114 s & f in repairs 110mm bore pvc ( swr ) junction single ( single t ) equal or unequal complete all as specified and directed. 115 m&l for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over & including one coat of 1mm thick cement putty complete all as specified & directed.. 116 m&l for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified & directed. 117 m & l for preparation of newly plaster surfaces of wall& applying two coats of cement base paint over a coat of primer complete all as specified and directed. 118 m&l for preparation of new steel surfaces of any description over 10 cm width or girth applying two coats of synthetic enamel paint ( 1st grade ) over a coat of red oxide primer complete all as specified. 119 m&l for preparing the new wooden surface of any description over 10 cm width or girth & applying two coats of synthetic enamel paint ( 1st grade ) over one coat of pink primer complete all as specified & directed. 120 s&f in repair jet flush including plate and coonection pipe complete all as specified and directed. 121 m&l for machine cut kota stone slab flooring of size 550mm x 550mm 20 25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishinglaid over & including 15mm thick screed bed in cm 1:6 complete all as specified & directed. 122 m&l for kota stone slab 20 25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing in riser of steps, skirting, dado and pillar laid over & including cement screed 10mm thick in cm ( 1:4 ) complete all as specified & directed. 123 only on old surfacesmirror polishing on marble / granite / kota stone where ever required to give high gloss finish complete all as specified & directed. 124 m&l for crack repair in wall, ceiling and roof with cm 1:3 mixed with water proofing compound @3% by weight of cement, width of crack is 25mm and 50mm deep including necessary demolition and making good disturbed surfacecomplete all as specified & directed.note : wpc measured and paid separately 125 supply and fixing in repairs18mm thick ( one side decorative lamination & other side balancing lamination sheet density 600kg / m3 ) solid pvc board with edge bending on edgeswith cement solvent adhesive for shutter / kitchen cabinet / cup boards / partition wall / wall cabinet and similar work completeall as specified and directed. make : rajshree / kitply / century or equivalent as approved by ao. 126 supply and fixing in repairs12mm thick ( one side decorative lamination & other side balancing lamination sheet density 600kg / m3 ) solid pvc board with edge bending on edges with cement solvent adhesive for shutter / kitchen cabinet / cup boards / partition wall / wall cabinet and similar work complete all as specified and directed.make : rajshree / kitply / century or equivalent as approved by ao. 127 s&f stainless steel soft close hinge with assembly, complete all as specified and directed.make : godrej code no. 5070 128 s&f 125 mm dia oval shape brass handle fancy type bright finish complete all as specified & directed. 129 s&f stainless steel basket ( plain ) of approved quality of size 520 x 485 x 100mm complete all as spepcified and directed. make : godrej ss 304 code no. 6154 130 s&f stainless steel plate / thali basket of approved quality of size 520 x 485 x 200mm complete all as spepcified and directed. make : godrej ss 304 code no. 6168 131 s&f stainless steel cutlery basket of approved quality of size 520 x 485 x 100mm complete all as spepcified and directed. make : godrej ss 304 code no. 6162 132 s&f stainless steel cup & saucer basket of approved quality of size 520 x 485 x 100mm complete all as spepcified and directed. make : godrej ss 304 code no. 6159 133 s&f stainless steel two shelf pull out basket of approved quality of size 150 x 485 x 430mm complete all as spepcified and directed. make : godrej ss 304 code no. 6169 134 s&f steel ball bearing basket / trolly / drawer channel 50cm long complete all as spepcified and directed.make : godrej code no. 8178 135 total in figures 136 quoted amount in words...
12
Military Engineer Services - Rajasthan
38911633 special repair to building no. p 54 1 to 4 jco md accn at tower colony of rkt regt pinaka and spl repair and addn / altn of bldg no 95 of 97 ad gp sp wksp under ge nasirabad spl repair to bldg no. p 54 1 to 4 jco md accn at tower colony of rkt regt pinaka and spl repair and addn / altn of bldg no 95 of 97 ad gp sp wksp. 1 taking down cement or cement lime plaster on stone / brick wall, ceiling incl. raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. 2 m& l for rendering in cement mortar ( 1:6 ) , 15mm thick on stone masonary surfaces finished fair and even complete all as specified and directed. 3 m&l for rendering 15mm thick in cm 1:4 on stone masonry, external surfaces finished fair & even complete all as specified and directed. 4 m&l for rendering in cement mortar ( 1:3 ) 5mm thick as on ceiling surfaces finished even and smooth without using extra cement, complete all as specified and directed. 5 dubbing out average 10mm thick in cm 1:4 on irregular faces of walls or concrete chajjas etc complete all as specified and directed. 6 m&l for preparation of new plastered surfaces of wall and applying two coats ofoil bound distemperover a coat of1mm thick wall care putty complete all as specified and directed. 7 m&l for preparation of new plastered surfaces of ceiling and applying three coats ofwhite wash complete all as specified and directed 8 m&l for preparation of old plastered surfaces of ceiling and applying two coats ofwhite wash complete all as specified and directed 9 m & l preparation new decorated surfaces of wallsand providing two coat of cement base paint over a coat of primer, complete all as specified and directed. 10 m & l for complete removal of existing treatment of old plastered surfaces ofwall and applying two coats of oil bound distemper over & including 1mm thick ( jk / birla ) white putty complete all as specified and directed. 11 m & l for preparation of old wooden surfacesof any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 12 m & l for preparation of old concrete surfaces of kerb stone etc over 10cm in width or girth and applying two coats of synthetic enamel paint, alternate in black & white tint, all as specified & as directed. 13 m & lfor preparation old decorated surfaces of wallsand providing one coat of cement base paint complete all as specified and directed. 14 demolition of cement concrete ( unreinforeced ) in floors and paving n.exc 15cm thickness ( above or below ground level ) complete all as specified and directed. 15 m&l for machine cut kota stone slab flooring 18 20mm thick over and including 15mm thick screed bed in cm 1:6, laid andjointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. 16 m&l for kota stone slab 18 20mm thick in riser of steps, skirting, dado and pillar laid over and including cement screed 10mm thick in cm ( 1:4 ) & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishingcomplete all as spd & directed. 17 m&l for cement concrete type d 2, 1:4:8 ( 40 mm graded aggregate ) , 100 mm thick, complete all as specified and directed. 18 m&l for factory made 60mm thick machine pressed precast cement concrete coloured interlocking paver blocks of grade m 35 conforming to is 15658 2006 of shape and size as directed with grey cement andpigment laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed. 19 m&l for pcc 1:2:4 type b 1 ( using 20mm stone crushed agg. ) as inrounded or chamfered on edges in any description complete all as specified. 20 m & l forbitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5 kg per sq m per coat and applying plythene film black, 50 micron laid in floors complete over sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed.note : supply of water proofing compound shall be measured and paid separately. 21 supply only water proofing compound isi marked complete all as specified and directed. 22 m & l for pcc ( 1:5:10 ) type e 2 using 40mm graded crushed stone aggregate as in sunken floors complete all as specified and directed. 23 m&l forglazed ceramic coloured tiles, size 450 mm x 300 mm, 6 7 mm thick on vertical surfaces of wall such as dados, skirting etc set& jointed in neat slurry and pointed in white or colour cement to match over 10 mm thick screed plaster in cm 1:4 complete all as specified and directed 24 m & l for non skid ceramic tiles 7 to 8 mm thick ( square / rectangular ) area of each tile exceeding 0.11 sqmbut not exc 0.18 sqmin floors etc set and jointed in neat cement slurryand pointed inwhite or coloured in whiteor colouredcement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in cm ( 1:6 ) complete all as specified and directed. 25 all as per the item no 24.00 above but as in skirting 10 mm screed plaster in cm 1:4 complete all as specified. 26 m&l for 25mm thickpcc 1:2:4 type b 1 ( using 20 mm thick crushed stone aggregate ) as insub base complete all as specified and directed. 27 demolition of stone / brick masonry built in cement or cement lime mortar as in portion orderedand directed. 28 m&l for walling of random rubble, brought upto courses, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:6 complete all as specified & directed. 29 all as per serial item no. 28.00 above but except stone. 30 m&l forbrick work with flyashbricks straight or curved on plan exc 6m mean radius, built in cm 1:6 complete all as specified and directed. 31 m&l for brick work with old size fly ash bricks staright or curved on plan to any radius in half brick thick walls built in cm 1:4, complete all as specified and directed. 32 extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, hammer dressing with maximum depression on face from straight edge held against the dressed surface n. exc 20mm as specified. 33 demolition of stone slabs & tiles of any description or thickness in floors , aprons etc, complete all as specified and directed. 34 m & l for 18 20mm thick black granite on kitchen platform, window cill and similar work over & including 15mm thick screed bed in cm 1:6 laid over sand stone slabmachine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed. 35 m&l for 50 mm thick pcc 1:3:6 type c1 using 20 mm graded crushed stone aggregate as inplinth protection surface finished fair and evencomplete all as specified. note : plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic ( 1:3 ) . 36 taking down old unserviceable shower rose & s&f brass chromium plated shower rose of 125 mm size withswivel joints, including fixing to steel pipe or union of 15mm bore, mixing valve including three joints to steel pipes or unions and plugging and screwing to walls complete all as specified and directed. 37 taking out old unserviceable water closet ( squatt pattern ) and s&f vitreous china, squatting pan orissa pattern size 580 x 440mm, white with integral foot rests ( excluding flushing cistern and flush pipe ) with vitreous china ‘p’ or ‘s’ trap, front or back inletincluding connection to trap and to flushing pipe, anti syphonage pipe , including pcc ( 1:2:4 ) type b 1 for fixing of wc and making good the floor to match the existing complete all as specified and directed. 38 taking down old unserviceable flushing cistern s&f pvc valveless syphonic action type low level flushing cistern, 10 ltrs capacity . white, with inlet ball valve, float, handlewith 32mm pvc flush pipe, fixed on walls by driling holes and using pvc rawl plug of suitable size complete all as specified and directed. 39 taking down old unserviceable pvc connectionand s & f pvc connection, heavy duty 15 mm bore, 45 cm long with two nos ptmt nuts at both ends of approved quality complete all as specified and directed 40 s&f in repair soap dish any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as sped & directed. 41 taking out old un serviceable tubular towel rail & s&f tubular towel rail aluminium anodised 20mm dia d type 60cm long between flanges complete all as sped & directed. 42 s & f 15mm bore dia stop valves / angle cock, cast copper alloy, isi marked, chromium plated with long shank and cup ( concealed type ) screwed down, light pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by the engineer in charge. 43 s&f in repairschromium plated angle stop cock 15 mm diascrewed down light pressure, isi markedscrewed both ends for iron pipe or for union complete all as spd & directed 44 s&f in repairs chromium plated bib taps, with capstan heads, isi marked screwed down for iron pipe or for brass ferrule& fixed for 15 mm bore pipe complete all as specified & directed. 45 s & f for sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; in cluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to rigid upvc waste pipe bent to shape & fixed to wall with bracket overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by the engineer in charge. note : minor variation in dimension + 20mm as per standard catalogue of manufacturer may be approval of ge in writing without price adjustment. 46 taking down old wooden plate rack and s&f stainless steel plate rack made of 0.50mm thick of over all size920mm x 785 mm x 255 mm and weight not less than 7.00 kg each of approved qualitycomplete all as specified and directed.note : minor variation in dimension may be permitted as per standard manufacturing models of manufacturer without price adjustment with prior approval of ge but weight shall not be less than 7.00 kgs. 47 s&f in repairs looking mirror of size 600 x 450 bevelled edgewithselected quality glass mounted on 6 mm thick ac bldg boardor commercial plywood & fixed to wooden plugs with chromium plated brass screw and cup washers.complete all as specified and directed 48 taking down old unserviceable whb and s&fwash hand basin vitreous china white / ivory colour flat size 550 x 400mm fixed including waste coupling, waste pipe , complete all as specified and directed. 49 taking up or down steel tubing and connection 15 mm bore and removing the same from site / keeping aside for reuse complete all as specified and directed. 50 all as per srl itemno. 49.00 above but 20 mm bore. 51 all as per srl item no. 49.00 above but 25 mm bore. 52 s & f water tubing 15 mm bore, medium weight, isimarked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified anddirected. 53 all as per srl item no. 52.00 above but 20 mm bore. 54 all as per srl item no. 52.00 above but 25 mm bore. 55 refixing 15mm bore old gi tubing to walls, ceiling or laid on floor including necessary cleanig, cutting, screwing and new fittings such as elbow, tee, union, socket, reducer etc complete all as specified anddirected. 56 all as per srl item no. 55.00 abovebut 20 mm bore. 57 all as per srl item no. 55.00 above but 25 mm bore. 58 taking down chowkhats or frames with shutters ( without taking off shutters from the frames ) n. exc 1.50 sqm each and removing from site complete all as spd & directed and making good disturbed surface of walls in cement mortar ( 1:3 ) complete all as specified anddirected. 59 taking down chowkhats or frames with shutters ( without taking off shutters from the frames ) exc 1.50 sqm and n.exc 4.00 sqm each and removing from site complete and making good disturbed surfaces of wall in cm ( 1:3 ) all as specified and directed. 60 m & l for rolled mild steel work angle iron as in door frame ( chowkhats ) & cooler stand including provn of 12mm dia deformed bar welded horizontally to bottom of frame confirming to fe 290 or fe 330 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed. 61 s & f factory made solid pannel pvc door shutter 30mm thick ( style ) consisting of frame made out of ms tubes for top and bottom rail.ms frame shall be covered with heat moulded plain colour pvc c channel having pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour pvc sheet to be fitted in the ms frame welded. sealed to the stiles and rails with suitable pvc sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings on ssrpart ii 2020 complete all as specified and directed. 62 s & f second class hw hollock / bonsum / sal35mm thick, factory made, plain framed, paneled shutter ( three panels ) with panels of 9mm thick bwpgrade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to is 710. the size of rails & style shall be as per is 1003 ( part i ) kiln seasoned as per is 1141 & chemically pressure treated as per is 401 complete all as per specified and directed. 63 s & f for 2nd class hw 35 mm thick, gauged and skeleton shutters ( three panels ) , factory made open rebated and prepare to receive glass, gauge etc ( with sash bar ) , edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. size of members of shutter shall be as specified in ssr 2009 part i, section 8 clausemember shall be kiln seasoned as per is 1141 & chemically pressure treated as per is 401 complete all as specified and directed. 64 s&f steel window / ventilator factory made, out of ms hollow section 79mm x 39mmx1.6mm thick frame with double shutter ( glazed & wiregauged shutters ) made out of z section using flush butt welding and tennon riveting all as per is 1038 / 83, dobby hinges shall be provided to both shutters, locking arrangements as per sample approval by ge, provided with knob, 10mm ms square bars in grill, z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in pcc 1:2:4 type b 1, and plaster with finishes to match the existing surfaces, including two coat of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. note : wire mesh and sheet glass shall be measured & paid separately under respective items. 65 m&l18 / 19mm thick block board grade .ii quality, interior grade with decorative type with decorative face veneer on bothface fixed complete, including teak wood lipping 19 x 6mm thick fixed with nails in shelves, partition and palmet boxes, shelves, almirah book cases, toilet boxes, racks, cup board shutter and similar works all as spepcified and directed. 66 m & l for 20 to 25 mm thick machine cut kota stone shelves incl rubbing & polishingand set in cm ( 1:4 ) incl cutting inserting into wall not less than 50mm deep and making good to disturbed surfacescomplete all as specified and directed. 67 s & fcontinuous ( piano ) hinges, mild steel, bright finishwidth of flaps ( when open ) 40 mm all as specified and directed. 68 s & fmagnetic ball catcher for cupboard shutters, complete all as specified and directed. 69 m&l for iind class hwplain , solid , straight chowkats and frames sec area n. exe 40 sqcm complete and all as specified. 70 s & f 100mm size hasp and staple, aluminium anodisedsafety type, fixed with screws complete all as specified and directed 71 s & f 75mm size hasp and staple, aluminium anodisedsafety type, fixed with screws complete all as specified and directed 72 s & f in 50 mm dia polished hardwood knobs fixed with screws complete all as specified and directed. 73 s & f for 300mm long aluminium alloy, anodised, sliding door bolts with hasps, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all asspecified anddirected. 74 s & f extruded aluminium handle fabricatedtype, anodised 150mm size conforming to is complete all as specified and directed. 75 s&f aluminium, anodised, barrel tower bolt of extruded section, isi marked, 150 mm long complete all as specified and directed. 76 s & f 125mm double action spring hinges, mild steel with steel wire spring, stove enaelled black, completeall asspecified anddirected. 77 s&f mild steel butt hinges, medium weight, cold rolled, isi marked of size 100 mm, complete all as specified and directed. 78 s&f stainless steel wire cloth 0.36mm nominal dia of wire & average width ofaperture 1.40mm & fixed with wire staples complete all as spd & directed. 79 m & l for preparation of new wooden surface over 10cm width or girth and applying two coats of synthetic enamel paint of ist quality over a coat of pink primer complete all as specified and directed. 80 m&l for preparation of new steel surface over 10cm width or grith & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as spd & directed. 81 s&f 3.00 mm thick sheet glass, ordinary / figured quality & glazing with oil putty not exc0.50 sqm each pane complete all as spd & directed. 82 s&f in repair fancy type 20mm dia aluminium curtainrods powder coated fixed to bracket completed all as spd & directed. 83 s&f in repairs decorative type knobs with bracket of ms powder coated fixing at end of pelmet rod complete al as spd & directed. 84 dismantling of existing unserviceable water tank ofany description capacity exc 250 ltr but n.exc 500trs capacity each complete all as specified and directed 85 supply and fix 500 ltrs capacity rotational moulded polyethylene water storage tanks double layered ( cylindrical vertical with closed top ) isi marked, hoisted and fixed in position and making necessary arrangements for fixing inlet, outlet, over flow pipe & provision of wash out pipe etc complete as specified in ssr part i 86 s&f ball valves ptmt high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe, 20mm bore compete ( minimum weight 210 gm ) complete all as spd & directed. 87 s&fin repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 25 mm dia, isi marked complete all as spd & directed. 88 m&l for 40 mm thick sand stone slabs; set and jointed over joists etc. in cm 1:4 as in base of water tank and m&l 25 mm thick pcc 1:2:4 type b 0 ( using 12.5mm stone crushed agg. ) finished concrete surfaces even & smooth complete all as specified and directed 89 taking down existing unservicable treatment of any description including cement plaster / conctrete any thickness from roof surface cleaning of roof surfaces and and preparing it for further treatment and removing rubbish from the site up to 50 mtrs complete all as specified and directed. 90 m&l for screeding 10mm thick in cm 1:4 on fair faces of rcc / stone patti roof surface finished fair & even without using extra cement even complete all as spescified and directed. 91 m & l for five layered roof treatment with app modified polymeric water proofing membrane, 2mm thick having centre core not less than 100 micron high molecular high density polythylene film ( hmhdpe ) protected on both sides with high polymeric asphaltic mix and 20 micron hmhdpe film weight not less than 2.60 kg / sqm applied with bonding material using belown type bitumen conforming to is 702 grade85 / 25 @ 1.20 kg / sqm over bitumen primer conforming to is 3384 @ 0.40 kg / sqm with final coat of bonding bitumen grade 85 / 25 @ 1.20 kg / sqm over app membrane with all overlaps complete all as specified and directed. 92 material and labour for 40mm thick ( average consolidated thickness ) pcc ( 1:2:4 ) type b 0 using 12.5 mm graded stone aggregate laid in slope as in padding, finished even and smooth on existing slope including provision of v shaped groove 6mm wide and 10mm deep at 1.20 metre interval or parts thereof, both ways on top of pcc padding and filled with mastic bitumen of ( 1:1 ) proportion complete all as specified and directed. 93 m&l for coved fillet in pcc 1:2:4 type b 0 using 12.5mm graded crushed stone aggregate at junction of roof & parapet wall and other vertical surfacesand surface painted with a hot paving bitumen grade 30 / 40 conforming to is 73 @0.70 kg / sqm over a coat of bituminous primer conforming to is 3384 @ 0.30 ltr sqm complete all as specified and directed 94 taking out of old grill & m & l framed work such as grills, gratings, etc, with ends of bars shouledered and / or reiveted , or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of watertanks , cooler stand, and similar work coforming to fe 290m gde e 165 complete all as specified and directed. 95 m&l for pcc 1:3:6 type c1 using 20 mm graded stone aggregateas in surface channel and drain etc complete all as specified and directed. 96 m&l for pcc 1:2:4 type c1 using 40 mm graded stone aggregateas in surface channel and drain etc complete all as specified. 97 s&f in repairs110mm dia upvc rain water pipe fixed on wall under walls as spout incl.complete all as specified and directed. 98 s&f in repairs75mm dia upvc rain water pipe fixed on wall under walls as spout includingcomplete all as specified and directed. 99 s&f only stack clamp out of 50mm by 5mm flat iron and 16 mm dia round iron stays fixed to pipe of bore 100mm complete all as specified and directed. 100 s&f in repair pvc bend / shoe of dia. 110mm complete all as specified and directed. 101 m&l for pcc 1:3:6 , type c 2, using 40mm graded crushed stoneaggregate as in foundation, filling and mass concrete, including necessary formwork, complete all as specified and directed. 102 s & f false ceiling with fibre cement designer tile ivory painted ( high pressure steam cured ) of 4mm thickness ( as per is: 14862 ) of size 595x595 mm and any one of the desin ( occeanic, lake & hill, cascade or electra ) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gms, both side inclusive ) consisting of main t runner with suitably spaced joints to get required length, and 15x32mm made from 0.30 mm thick sheet, and cross t of size 15x32mm made of 0.30 mm sheet, spaced between main t at 600mm c / c to form a grid of 600x600mm and wall angle of size 15x20mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including, required cutting / making, opening for services like diffusers, grills, light fittings, fixures, smoke detectors etc.main t runners to be suspended from ceiling using gi soffit cleats fixed to existing rafter, purlin, etc with dash fasteners, gi adjustable rods of 3mm dia with gavanised butterfly level clips, spaced at 1200 mm c / c along main t, bottom exposed width of 15mm of allt sections shall be centra black pre painted with polyester paint, and having a load bearing capacity of 12 kg / sqm, all complete at all height and dismantling of wall and ceiling boards ( fibre, pulp, insulation, etc. ) or insulation boards / slabs / blankets, any thickness, including cover filletscomplete all as specified and directed. 103 dismantling of asbestos cement ( corrugated, semicorrugated, etc. ) sheets in roof coverings complete all as specified and directed. 104 s&f pre painted galvatume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws fixed with l & j hooks and washers, in roofs, walls etc with grade of zink coating 275 complete all as specified and directed. 105 s&f pre painted galvalume aluminum zinc coating gi based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and directed 106 s&f 25mm dia fancy type stainless steel curtain rod fixed to bracket complete all as specified & directed. 107 s&f decorative type knob with bracket of stainless steel fixing at end of curtain rod complete all as specified & directed. 108 taking down carefully copper / aluminium point wiring ( light, fan, socket or power ) complete, including fittings such as switches, ceiling roses, holders, regulators, sockets etc., removing materials from siteand making good disturbed surface of walls, floors etc. 109 disconnecting unserviceable sub main wiring / service connection of any size and including conduit of any type and accessories and removing from site and making good the disturbed surfaces complete all as specified and directed. 110 taking downmcb dbs complete with mcbs / isolator etc removing materials from siteand making good disturbed surface of walls, floors etc complete all as specified and directed. 111 m&l for point wiring with 1.5 sqmm, pvc insulated, unsheathed, stranded copper conductor single core frls cable, is 694 marked, drawn through and including non metallic rigid pvc concealed conduit 20mm dia or higher complete with all pvc conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. / fittings isi marked and sunk type pressed steel anodised terminal box 1.2 mm thick with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including 1.5 sqmm stranded copper conductor pvc insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories for: 112 all as per item no. 111.00 here in before one light point / bell point controlled by one, one way switch. 113 all as per item no. 111.00 here in before one ceiling fan / exhaust fan point controlled by one, one way switch. 114 one three pin 5 amp socket on same board with other switches. 115 all as per item no. 111.00 here in before one 3 pin 5 amp socket on independent board. 116 all as per item no. 111.00 here in before one light point controlled by two nos two way switch. 117 all as per item no. 111.00 here in before but with 2.5 sqmm, for one 5 pin 5 / 15 amp socket on independent board including 2.5 sqmmstranded copper conductor ( frls ) pvc insulated green in colour as continous earth conductor connected to common earth. 118 s&f of sub main wiring with two runs of single core pvc insulated and unsheathed multistranded ( frls ) copperconductor cable of size 6.00 sqmm lt, 1100 volts grade, drawn through and including 25 mm dia or higher pvc nonmetallic concealed conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 6 sqmm single core multistrandedcopper conductor cable green colour as earth continuity conductor complete all as specified and directed. 119 s&f switch piano flush type 5 amps, single pole one way 240 volts complete all as specified and directed. 120 s&f switch piano flush type 15 amps, single pole one way 240 volts complete all as specified and directed. 121 s&f switch piano flush type 5 amps, single pole two way 240 volts complete all as specified and directed. 122 s&f bell push piano flush type 5 amp complete all as specified and directed. 123 s&fsocket outlet 3 pin 5 / 6 ampflush type complete all as specified and directed. 124 s&fsocket out let 2 in 1, multipurpose 3 pin 15 / 16 amp flush type isi marked complete all as specified and directed. 125 s&f ceiling fan regulator electronic flush , steped ( four step ) 230 volts ac complete all as specified and directed. 126 s&f ceiling rose surface bakelite 3 terminals 63.5 x 17 mm complete all as specified and directed. 127 s&f of door bell ding dong type electric 230 volts ac , single phase, complete all as specified and directed. 128 s&f of lamp holder pvc / polycarbonate type with back plate complete all as specified and directed. 129 s&f led tube light fitting in acrylic linear tube ( 1x 18 watt ) , 230v for single led tube lightincluding 1 x 18 w ledretrofitbar professional cw 6500 k cover channel, bipin holders, led power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed. 130 s&f wall mounted decorative luminaire fitting suitalble for led lamp b 22 base 9 watt complete all as specified and directed by engr in charge. 131 s&f led lamp 10 watt suitable for 230 volts, 50 hz b 22 base complete all as specified and directed. 132 s&f led bulk head luminaire 1x 10 w bulk, ip 65 protection complete with all accessories and including connecting up with three core copper conductor cable complete all as specified and directed. 133 s&f testing and commissioning energy saving street light luminaire 35 watt led, pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate coverlic cover complete with individual led lences and complete all as specified and directed. 134 supply and fixing street light bracket made of 32 mm gi pipe, 1.2 mtr length fixed with two nos of clamp, nut and bolts complete all as specified and directed. 135 disconnecting and taking down existing electric meterand refixing the same electric meter, connecting, testing and sealing properly and making good disturbed surface of walls etc complete all as specified and directed. 136 taking down existing ceiling fan , dismantling blades and refixing after cleaning incl conecting up with three core flexible cable from ceiling rose to fan complete all as specified and directed. 137 s&f of mcb distribution board single pole & neutral with 200 amps rated bus bar, double door ip 42 dbs , made outof sheet steel enclosure, recessed type, factory made powder coated 8 way, 240 volts suitable for housing mcbs complete all as specified and directed.note: mcb db and mcb sp / spn will be of same make. 138 s&f of mcb distribution board tpn 4 way, 415 volts, double door, with 200 amps rated bus bar, neutral bar with shrouds, earth bar, ip 43 , made outof sheet steel enclosure, recessed type, factory made powder coated suitable for housing mcbs as incomer andoutgoing complete all as specified and directed.note: mcb db and mcb sp / spn will be of same make. 139 s & f of mcb sp, 240 volt, 6 amp to 30 amp capacity, 10 ka, c curve complete all as specified and directed. 140 s & f of mcb spn, 240 volt, 32 amp capacity, 10 ka , c curve complete all as specified and directed. 141 s & f of mcb sp, 240 volt, 63 amp capacity, 10 ka , c curve complete all as specified and directed. 142 s&f of mcb tpn, 415 volt, 63 amp capacity, 10 ka, c curve complete all as specified and directed. 143 m&l for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20 mm bore gi med grade with funnel and wire mesh pcc chamber in cement concrete 1:3:6 type c 2 and rcc cover with handle all as specified and shown in elect plate no 3 of ssr part i of 2009 including dismantling of old unsv existing earthing complete all as specified and directed. 144 supply and fixing storage type electric water heater ( geyser ) single phase 230 volts, stainless steel tank, vertical type oc capacity 25 ltr, bee 5 star rated connecting inlet / outlet / vent pipes, electric / earth connections , mounting bolts, nutsand carrying out testing for proper functioning including wiriting mes no with black enemel paint complete all as specified and directed. 145 supply and fix exhaust fan, steel body ac single phase, 230v of size 300 mm sweep with blades and frame and louvers suitable for 230 volts, single phase 50 hz ac supply, connecting with three core flexible copper cable including making hole for fixing of fan and making good the distrubed surface of wall complete all as specified and directed. 146 supply and fix ventilation fan, steel body ac single phase, 230v of size 250 mm sweep with blades and frame and louvers shutter suitable for 230 volts, single phase 50 hz ac supply, connecting with three core flexible copper cable including making hole for fixing of fan and making good the distrubed surface of wall complete all as specified and directed. 147 supply and laying including jointing, testing or fixing or passing through pipe, trench or duct commissioning and testing xlpe insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade size 16 sqmm, 4 core complete all as specified and directed by engineer in charge. 148 supply and fixingtubes light grade gi tubing 40 mm dia withall fitting laid in trenches complete all as specified and directed. 149 excavation in trenched n exc 1.50 m in width and n exc 1.50m in depth for foundation , manholes , cesspits, laying cables cables, pipes etc n exc 10 sqm on plan and getting out in any type of soil complete all as specified and directed. 150 returning filling in including spreading levelling watering and well ramming in layers n exc 25 cm thick complete all as specified and directed 151 removel of surplus soil to a distance n exc 50m and depositing where directed at a level n exc 1.5m above from the starting point complete all as specified and directed. 152 supply andlaying dry river sand for cable cushioning in trenches to required width at bottom and top cable including spreading, levelling, watering and consolidation, complete all as specified and directed by engineer in charge. note: punned thickness only shall be measured and paid. 153 m & l for old size sub class b’ bricks s as in cable cover, laid flat adjoining to each other width wise for protection of cables in trenches, complete, all as specified & directed. 154 taking down existing exhaust fan & wall mounted fan and re use at site or carrying to the store ( to be measured only when found serviceable in all respects complete forre use. ) complete all as specified and directed. 155 s&f led box type tube light fitting 20 watt made up of crca sheet with pre wired double sided connections including 1x20 watt retrofit led tube rod with extruded aluminium body , pc diffuser and inbuilt driver , double sided connection, complete with all accessories internally prewired complete all as specified and directed 156 s&f ceiling fan 1200 mm sweep , 230 volts, ac , 50 hz, copper winded motor, be star rated white colour complete with motor, blade set of three nos , down rod, canopy, shackle assy complete all as specified and directed 157 supply, fixing and testing energy saving street light luminaire 25 watt led , pressure die cast housing with high power led as lighting source and lens embedded pc cover with ip 66 protection incl connecting with three core copper flexible wire from ceiling rose to connector of light fitting complete all as specified and directed by engr in charge. 158 s&f recess mounted 2 x 2led luminarie 36 watt, cool day / warm white light with white powder coated crca housing with led driver, efficiencey >100 lm / wcomplete all as specified and directed. 159 m&l for tv socket including pvc conduit and co axial wire complete all as specified and directed 160 m&l for telephone socket including pvc conduit and telephone wire complete all as specified and directed 161 s & f single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 amp mcb sp `c series for geyser complete all as specified and directed 162 total in figures 163 quoted amount in words...
13
Department Of Local Bodies - Rajasthan
38899263 supply and fixing 16 mtr highmast light at surajgadh mata mandir , light works , supply, erection testing and commissioning of high mast lighting system ( as per cp3 trt / 1996ofile, uk ) consisting oftotally hotdipgalvanisedby single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries, mastheadassembly, two nos aviation obstructionneon lights, double drum type self sustaining winch, integral power tool ( winch motor with control circuit ) hot dipped galvanised heavy duty pipe lightening finial, suitableropes andccfoundationofm 15gradecompleteas required. themastis constructedfrommildsteelplates ( as perbs en 10025 ) cut and foldedtoformapolygonalsection, telescopicjointedandweldingasperbs 5135. the complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning of high mast. with all accessories, which also includs internal electrical cable and panel with foundation, erection & commissioning excluding luminaries and lamps , p & f of ip 66 protected high power led flood light system with extruded aluminiumhousing , toughened glass diffuser with suitable lenses on led to achieve various beam angles, 350 volt, 50hz, of high power led lamps supplied with pre wired cable of 1 mtr. integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to iec standards. system life of 50000 burning hours with 70 % of initial lumen be maintained. light output in red , green , blue, cool white or warm white colour as per engineers choice. fixtures shall be ce compliance. ( group 1 ) high power led flood light 350wattgr 1 , p&f of ip 55 protected light controlled switch based on infrared sensing and daylight with built in over load protection timer to switch off at preselecteedtime .switch shall have 7 days power backup without hampering of present time over ride facility for maintence purpose . suitable for 15 kw load ( three phase ) including contractor mcb cable glands terminal block and locking. , supplying and drawing fr pvc insulated & unsheathed flexible copper conductor isi marked is:694 ) of 1.1 kv grade and approved make in existing surface or recessed conduit / casing capping including making connections etc. as required. 4x 2.5 sq.mm. , flexible copper conductor isi marked ( is:694 ) of 1.1 kv grade and approved make in existing surface or recessed conduit / casing capping including making connections etc. as required. 4 x 16.0 sq.mm. , supply& fixng earth wire and strip in horizontal or vertical run in ground / surface / recess including riveting / soldering saddles making conection etc. as require 6 swg copper wire , providing and fixing in position lightening arrester set complete with 600mm x 600mm x 6mm thick g.i. earthing plate embedded below ground in earthling pit at 3.5 metre depth, g.i. strip of size 25mmx5mm thick from earthing plate to top of over head tank, g.i. finial made of gi bar 25mm dia and 2m long fixed on top of oh tank and connected to gi strip. the earthling set shall comply of is:3043 complete in all respect as per specification and the direction of the engineer , p &f in position frame made out of m.s. angle ( riveted or welded ) finished with two coat of red oxide and enamel paint including cutting, welding, holes etc. of following sizes as required. , s & laying following size ‘b’ class g.i. pipe confirming to is: 1239 p 1 ( 1990 ) with accessories for laying earth conductor / strip / cable in ground / surface / recess as required. , p & f of aviation obstruction light luminaire comprising of yellow painted die cast aluminium alloy housing, built in 75 va step up transformer, heat resistant clear glass cover, neon spiral lamp complete in all respect , providing and laying un reinforced, dowel jointed, plain cement concrete mix in pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. , dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer. , providing and fixing structural steel frame ( for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone ) on walls at all heights using m.s. square / rectangular tube in the required pattern as per architectural drawing including cost of cutting, bending, welding etc. the frame work shall be supported in wall with the help of ms brackets / lugs of angle iron / flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size ) of size 300x230x300mm including cost of necessary centring and shuttering and with approved expansion hold fasteners on cc / rcc surface including drilling necessary holes. approved cramps / pins etc. shall be welded to the frame work to support stone cladding the steel work will be given a priming coat of zinc primer as approved by engineer in charge and painted with two or more coats of epoxy paint ( shop drawings shall be submitted by the contractor to the engineer in charge for approval before execution ) . the frame work shall be fixed in true horizontal & vertical lines / planes. ( only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid...
14
Department Of Local Bodies - Rajasthan
38899260 supply and fixing 16 mtr highmast light at dholi kothi , light works , supply, erection testing and commissioning of high mast lighting system ( as per cp3 trt / 1996ofile, uk ) consisting oftotally hotdipgalvanisedby single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries, mastheadassembly, two nos aviation obstructionneon lights, double drum type self sustaining winch, integral power tool ( winch motor with control circuit ) hot dipped galvanised heavy duty pipe lightening finial, suitableropes andccfoundationofm 15gradecompleteas required. themastis constructedfrommildsteelplates ( as perbs en 10025 ) cut and foldedtoformapolygonalsection, telescopicjointedandweldingasperbs 5135. the complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning of high mast. with all accessories, which also includs internal electrical cable and panel with foundation, erection & commissioning excluding luminaries and lamps , p & f of ip 66 protected high power led flood light system with extruded aluminiumhousing , toughened glass diffuser with suitable lenses on led to achieve various beam angles, 350 volt, 50hz, of high power led lamps supplied with pre wired cable of 1 mtr. integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to iec standards. system life of 50000 burning hours with 70 % of initial lumen be maintained. light output in red , green , blue, cool white or warm white colour as per engineers choice. fixtures shall be ce compliance. ( group 1 ) high power led flood light 350wattgr 1 , p&f of ip 55 protected light controlled switch based on infrared sensing and daylight with built in over load protection timer to switch off at preselecteedtime .switch shall have 7 days power backup without hampering of present time over ride facility for maintence purpose . suitable for 15 kw load ( three phase ) including contractor mcb cable glands terminal block and locking. , supplying and drawing fr pvc insulated & unsheathed flexible copper conductor isi marked is:694 ) of 1.1 kv grade and approved make in existing surface or recessed conduit / casing capping including making connections etc. as required. 4x 2.5 sq.mm. , flexible copper conductor isi marked ( is:694 ) of 1.1 kv grade and approved make in existing surface or recessed conduit / casing capping including making connections etc. as required. 4 x 16.0 sq.mm. , supply& fixng earth wire and strip in horizontal or vertical run in ground / surface / recess including riveting / soldering saddles making conection etc. as require 6 swg copper wire , providing and fixing in position lightening arrester set complete with 600mm x 600mm x 6mm thick g.i. earthing plate embedded below ground in earthling pit at 3.5 metre depth, g.i. strip of size 25mmx5mm thick from earthing plate to top of over head tank, g.i. finial made of gi bar 25mm dia and 2m long fixed on top of oh tank and connected to gi strip. the earthling set shall comply of is:3043 complete in all respect as per specification and the direction of the engineer , p &f in position frame made out of m.s. angle ( riveted or welded ) finished with two coat of red oxide and enamel paint including cutting, welding, holes etc. of following sizes as required. , s & laying following size ‘b’ class g.i. pipe confirming to is: 1239 p 1 ( 1990 ) with accessories for laying earth conductor / strip / cable in ground / surface / recess as required. , p & f of aviation obstruction light luminaire comprising of yellow painted die cast aluminium alloy housing, built in 75 va step up transformer, heat resistant clear glass cover, neon spiral lamp complete in all respect , providing and laying un reinforced, dowel jointed, plain cement concrete mix in pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. , dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer. , providing and fixing structural steel frame ( for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone ) on walls at all heights using m.s. square / rectangular tube in the required pattern as per architectural drawing including cost of cutting, bending, welding etc. the frame work shall be supported in wall with the help of ms brackets / lugs of angle iron / flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size ) of size 300x230x300mm including cost of necessary centring and shuttering and with approved expansion hold fasteners on cc / rcc surface including drilling necessary holes. approved cramps / pins etc. shall be welded to the frame work to support stone cladding the steel work will be given a priming coat of zinc primer as approved by engineer in charge and painted with two or more coats of epoxy paint ( shop drawings shall be submitted by the contractor to the engineer in charge for approval before execution ) . the frame work shall be fixed in true horizontal & vertical lines / planes. ( only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid...
15
Department Of Local Bodies - Rajasthan
38899252 supply and fixing 16 mtr highmast light at baharpuri village laxmangarh , light works , supply, erection testing and commissioning of high mast lighting system ( as per cp3 trt / 1996ofile, uk ) consisting oftotally hotdipgalvanisedby single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries, mastheadassembly, two nos aviation obstructionneon lights, double drum type self sustaining winch, integral power tool ( winch motor with control circuit ) hot dipped galvanised heavy duty pipe lightening finial, suitableropes andccfoundationofm 15gradecompleteas required. themastis constructedfrommildsteelplates ( as perbs en 10025 ) cut and foldedtoformapolygonalsection, telescopicjointedandweldingasperbs 5135. the complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning of high mast. with all accessories, which also includs internal electrical cable and panel with foundation, erection & commissioning excluding luminaries and lamps , p & f of ip 66 protected high power led flood light system with extruded aluminiumhousing , toughened glass diffuser with suitable lenses on led to achieve various beam angles, 350 volt, 50hz, of high power led lamps supplied with pre wired cable of 1 mtr. integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to iec standards. system life of 50000 burning hours with 70 % of initial lumen be maintained. light output in red , green , blue, cool white or warm white colour as per engineers choice. fixtures shall be ce compliance. ( group 1 ) high power led flood light 350wattgr 1 , p&f of ip 55 protected light controlled switch based on infrared sensing and daylight with built in over load protection timer to switch off at preselecteedtime .switch shall have 7 days power backup without hampering of present time over ride facility for maintence purpose . suitable for 15 kw load ( three phase ) including contractor mcb cable glands terminal block and locking. , supplying and drawing fr pvc insulated & unsheathed flexible copper conductor isi marked is:694 ) of 1.1 kv grade and approved make in existing surface or recessed conduit / casing capping including making connections etc. as required. 4x 2.5 sq.mm. , flexible copper conductor isi marked ( is:694 ) of 1.1 kv grade and approved make in existing surface or recessed conduit / casing capping including making connections etc. as required. 4 x 16.0 sq.mm. , supply& fixng earth wire and strip in horizontal or vertical run in ground / surface / recess including riveting / soldering saddles making conection etc. as require 6 swg copper wire , providing and fixing in position lightening arrester set complete with 600mm x 600mm x 6mm thick g.i. earthing plate embedded below ground in earthling pit at 3.5 metre depth, g.i. strip of size 25mmx5mm thick from earthing plate to top of over head tank, g.i. finial made of gi bar 25mm dia and 2m long fixed on top of oh tank and connected to gi strip. the earthling set shall comply of is:3043 complete in all respect as per specification and the direction of the engineer , p &f in position frame made out of m.s. angle ( riveted or welded ) finished with two coat of red oxide and enamel paint including cutting, welding, holes etc. of following sizes as required. , s & laying following size ‘b’ class g.i. pipe confirming to is: 1239 p 1 ( 1990 ) with accessories for laying earth conductor / strip / cable in ground / surface / recess as required. , p & f of aviation obstruction light luminaire comprising of yellow painted die cast aluminium alloy housing, built in 75 va step up transformer, heat resistant clear glass cover, neon spiral lamp complete in all respect , providing and laying un reinforced, dowel jointed, plain cement concrete mix in pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. , dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer. , providing and fixing structural steel frame ( for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone ) on walls at all heights using m.s. square / rectangular tube in the required pattern as per architectural drawing including cost of cutting, bending, welding etc. the frame work shall be supported in wall with the help of ms brackets / lugs of angle iron / flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size ) of size 300x230x300mm including cost of necessary centring and shuttering and with approved expansion hold fasteners on cc / rcc surface including drilling necessary holes. approved cramps / pins etc. shall be welded to the frame work to support stone cladding the steel work will be given a priming coat of zinc primer as approved by engineer in charge and painted with two or more coats of epoxy paint ( shop drawings shall be submitted by the contractor to the engineer in charge for approval before execution ) . the frame work shall be fixed in true horizontal & vertical lines / planes. ( only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid...
16
Department Of Local Bodies - Rajasthan
38899244 supply and fixing 16 mtr highmast light at lili play ground supply and fixing 16 mtr himast light at laxmangarh , light works , supply, erection testing and commissioning of high mast lighting system (as per cp3 trt/1996ofile,uk)consisting oftotally hotdipgalvanisedby single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries,mastheadassembly,two nos aviation obstructionneon lights, double drum type self sustaining winch, integral power tool( winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening finial,suitableropes andccfoundationofm 15gradecompleteas required. themastis constructedfrommildsteelplates(as perbs en 10025)cut and foldedtoformapolygonalsection,telescopicjointedandweldingasperbs 5135. the complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning of high mast. with all accessories, which also includs internal electrical cable and panel with foundation, erection & commissioning excluding luminaries and lamps , p & f of ip 66 protected high power led flood light system with extruded aluminiumhousing , toughened glass diffuser with suitable lenses on led to achieve various beam angles, 350 volt, 50hz, of high power led lamps supplied with pre wired cable of 1 mtr. integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to iec standards. system life of 50000 burning hours with 70 % of initial lumen be maintained. light output in red , green , blue, cool white or warm white colour as per engineers choice. fixtures shall be ce compliance. (group 1) high power led flood light 350wattgr 1 , p&f of ip 55 protected light controlled switch based on infrared sensing and daylight with built in over load protection timer to switch off at preselecteedtime .switch shall have 7 days power backup without hampering of present time over ride facility for maintence purpose . suitable for 15 kw load (three phase ) including contractor mcb cable glands terminal block and locking. , supplying and drawing fr pvc insulated & unsheathed flexible copper conductor isi marked is:694) of 1.1 kv grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 4x 2.5 sq.mm. , flexible copper conductor isi marked (is:694) of 1.1 kv grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 4 x 16.0 sq.mm. , supply& fixng earth wire and strip in horizontal or vertical run in ground/surface/recess including riveting/soldering saddles making conection etc. as require 6 swg copper wire , providing and fixing in position lightening arrester set complete with 600mm x 600mm x 6mm thick g.i. earthing plate embedded below ground in earthling pit at 3.5 metre depth, g.i. strip of size 25mmx5mm thick from earthing plate to top of over head tank, g.i. finial made of gi bar 25mm dia and 2m long fixed on top of oh tank and connected to gi strip. the earthling set shall comply of is:3043 complete in all respect as per specification and the direction of the engineer , p &f in position frame made out of m.s. angle (riveted or welded) finished with two coat of red oxide and enamel paint including cutting, welding, holes etc. of following sizes as required. , s & laying following size ‘b’ class g.i. pipe confirming to is: 1239 p 1 (1990) with accessories for laying earth conductor/ strip/ cable in ground/ surface/ recess as required. , p & f of aviation obstruction light luminaire comprising of yellow painted die cast aluminium alloy housing, built in 75 va step up transformer, heat resistant clear glass cover, neon spiral lamp complete in all respect , providing and laying un reinforced, dowel jointed, plain cement concrete mix in pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. , dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer. , providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using m.s. square/ rectangular tube in the required pattern as per architectural drawing including cost of cutting, bending, welding etc. the frame work shall be supported in wall with the help of ms brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of size 300x230x300mm including cost of necessary centring and shuttering and with approved expansion hold fasteners on cc/rcc surface including drilling necessary holes. approved cramps/ pins etc. shall be welded to the frame work to support stone cladding the steel work will be given a priming coat of zinc primer as approved by engineer in charge and painted with two or more coats of epoxy paint (shop drawings shall be submitted by the contractor to the engineer in charge for approval before execution). the frame work shall be fixed in true horizontal & vertical lines/planes. (only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid...
17
Department Of Local Bodies - Rajasthan
38899233 supply and fixing 16 mtr highmast light at saini dharmshalalaxmangarh , light works , supply, erection testing and commissioning of high mast lighting system (as per cp3 trt/1996ofile,uk)consisting oftotally hotdipgalvanisedby single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries,mastheadassembly,two nos aviation obstructionneon lights, double drum type self sustaining winch, integral power tool( winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening finial,suitableropes andccfoundationofm 15gradecompleteas required. themastis constructedfrommildsteelplates(as perbs en 10025)cut and foldedtoformapolygonalsection,telescopicjointedandweldingasperbs 5135. the complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning of high mast. with all accessories, which also includs internal electrical cable and panel with foundation, erection & commissioning excluding luminaries and lamps , p & f of ip 66 protected high power led flood light system with extruded aluminiumhousing , toughened glass diffuser with suitable lenses on led to achieve various beam angles, 350 volt, 50hz, of high power led lamps supplied with pre wired cable of 1 mtr. integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to iec standards. system life of 50000 burning hours with 70 % of initial lumen be maintained. light output in red , green , blue, cool white or warm white colour as per engineers choice. fixtures shall be ce compliance. (group 1) high power led flood light 350wattgr 1 , p&f of ip 55 protected light controlled switch based on infrared sensing and daylight with built in over load protection timer to switch off at preselecteedtime .switch shall have 7 days power backup without hampering of present time over ride facility for maintence purpose . suitable for 15 kw load (three phase ) including contractor mcb cable glands terminal block and locking. , supplying and drawing fr pvc insulated & unsheathed flexible copper conductor isi marked is:694) of 1.1 kv grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 4x 2.5 sq.mm. , flexible copper conductor isi marked (is:694) of 1.1 kv grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 4 x 16.0 sq.mm. , supply& fixng earth wire and strip in horizontal or vertical run in ground/surface/recess including riveting/soldering saddles making conection etc. as require 6 swg copper wire , providing and fixing in position lightening arrester set complete with 600mm x 600mm x 6mm thick g.i. earthing plate embedded below ground in earthling pit at 3.5 metre depth, g.i. strip of size 25mmx5mm thick from earthing plate to top of over head tank, g.i. finial made of gi bar 25mm dia and 2m long fixed on top of oh tank and connected to gi strip. the earthling set shall comply of is:3043 complete in all respect as per specification and the direction of the engineer , p &f in position frame made out of m.s. angle (riveted or welded) finished with two coat of red oxide and enamel paint including cutting, welding, holes etc. of following sizes as required. , s & laying following size ‘b’ class g.i. pipe confirming to is: 1239 p 1 (1990) with accessories for laying earth conductor/ strip/ cable in ground/ surface/ recess as required. , p & f of aviation obstruction light luminaire comprising of yellow painted die cast aluminium alloy housing, built in 75 va step up transformer, heat resistant clear glass cover, neon spiral lamp complete in all respect , providing and laying un reinforced, dowel jointed, plain cement concrete mix in pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. , dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer. , providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using m.s. square/ rectangular tube in the required pattern as per architectural drawing including cost of cutting, bending, welding etc. the frame work shall be supported in wall with the help of ms brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of size 300x230x300mm including cost of necessary centring and shuttering and with approved expansion hold fasteners on cc/rcc surface including drilling necessary holes. approved cramps/ pins etc. shall be welded to the frame work to support stone cladding the steel work will be given a priming coat of zinc primer as approved by engineer in charge and painted with two or more coats of epoxy paint (shop drawings shall be submitted by the contractor to the engineer in charge for approval before execution). the frame work shall be fixed in true horizontal & vertical lines/planes. (only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid...
18
Department Of Local Bodies - Rajasthan
38899227 supply and fixing 16 mtr highmast light at badi haveli mojpur at laxmangarh , light works , supply, erection testing and commissioning of high mast lighting system ( as per cp3 trt / 1996ofile, uk ) consisting oftotally hotdipgalvanisedby single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries, mastheadassembly, two nos aviation obstructionneon lights, double drum type self sustaining winch, integral power tool ( winch motor with control circuit ) hot dipped galvanised heavy duty pipe lightening finial, suitableropes andccfoundationofm 15gradecompleteas required. themastis constructedfrommildsteelplates ( as perbs en 10025 ) cut and foldedtoformapolygonalsection, telescopicjointedandweldingasperbs 5135. the complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning of high mast. with all accessories, which also includs internal electrical cable and panel with foundation, erection & commissioning excluding luminaries and lamps , p & f of ip 66 protected high power led flood light system with extruded aluminiumhousing , toughened glass diffuser with suitable lenses on led to achieve various beam angles, 350 volt, 50hz, of high power led lamps supplied with pre wired cable of 1 mtr. integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to iec standards. system life of 50000 burning hours with 70 % of initial lumen be maintained. light output in red , green , blue, cool white or warm white colour as per engineers choice. fixtures shall be ce compliance. ( group 1 ) high power led flood light 350wattgr 1 , p&f of ip 55 protected light controlled switch based on infrared sensing and daylight with built in over load protection timer to switch off at preselecteedtime .switch shall have 7 days power backup without hampering of present time over ride facility for maintence purpose . suitable for 15 kw load ( three phase ) including contractor mcb cable glands terminal block and locking. , supplying and drawing fr pvc insulated & unsheathed flexible copper conductor isi marked is:694 ) of 1.1 kv grade and approved make in existing surface or recessed conduit / casing capping including making connections etc. as required. 4x 2.5 sq.mm. , flexible copper conductor isi marked ( is:694 ) of 1.1 kv grade and approved make in existing surface or recessed conduit / casing capping including making connections etc. as required. 4 x 16.0 sq.mm. , supply& fixng earth wire and strip in horizontal or vertical run in ground / surface / recess including riveting / soldering saddles making conection etc. as require 6 swg copper wire , providing and fixing in position lightening arrester set complete with 600mm x 600mm x 6mm thick g.i. earthing plate embedded below ground in earthling pit at 3.5 metre depth, g.i. strip of size 25mmx5mm thick from earthing plate to top of over head tank, g.i. finial made of gi bar 25mm dia and 2m long fixed on top of oh tank and connected to gi strip. the earthling set shall comply of is:3043 complete in all respect as per specification and the direction of the engineer , p &f in position frame made out of m.s. angle ( riveted or welded ) finished with two coat of red oxide and enamel paint including cutting, welding, holes etc. of following sizes as required. , s & laying following size ‘b’ class g.i. pipe confirming to is: 1239 p 1 ( 1990 ) with accessories for laying earth conductor / strip / cable in ground / surface / recess as required. , p & f of aviation obstruction light luminaire comprising of yellow painted die cast aluminium alloy housing, built in 75 va step up transformer, heat resistant clear glass cover, neon spiral lamp complete in all respect , providing and laying un reinforced, dowel jointed, plain cement concrete mix in pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. , dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer. , providing and fixing structural steel frame ( for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone ) on walls at all heights using m.s. square / rectangular tube in the required pattern as per architectural drawing including cost of cutting, bending, welding etc. the frame work shall be supported in wall with the help of ms brackets / lugs of angle iron / flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 ( 1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size ) of size 300x230x300mm including cost of necessary centring and shuttering and with approved expansion hold fasteners on cc / rcc surface including drilling necessary holes. approved cramps / pins etc. shall be welded to the frame work to support stone cladding the steel work will be given a priming coat of zinc primer as approved by engineer in charge and painted with two or more coats of epoxy paint ( shop drawings shall be submitted by the contractor to the engineer in charge for approval before execution ) . the frame work shall be fixed in true horizontal & vertical lines / planes. ( only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid...
19
Department Of Heavy Industry - Rajasthan
38895991 bids are invited for pcc poles inculding related electrical item supply of 9.0 mtr long pcc pole of 200 kg working load as per rec manual no 15 / 1979 ( amended upto date ) . pcc poles inculding related electrical item supplying of overhead steel core aluminum conductor ( acsr ) 30 sqmm of ( 6+1 ) 2.59mm ( weasel ) isi marked ( is 398 part ii 1996 ) made of aluminum alloy 4600 of is 617 1994 ( with latest amendment if any ) with steel nut and bolts conforming to is 1363 1992 & is 1367 / 1979 80 ( with latest amendments if any ) all ferrous metal parts. pcc poles inculding related electrical item lt bracket 2 feet with clamp pcc poles inculding related electrical item lt pin insulator with hardware pcc poles inculding related electrical item lt sheckle insulator with hardware pcc poles inculding related electrical item stack wire pcc poles inculding related electrical item stack rod set complete pcc poles inculding related electrical item guy insulator total quantity : 5720...
20
Milk Producer Cooperative Limited - Rajasthan
38697582 tender for supply of aluminium alloy milk cans with lids capacity 40 litre(3100 nos.)....
21
Raj Comp - Rajasthan
38609795 request for proposal (rfp) document for upgradation of the existing studio and supply and installation of items for setup new professional grade studio with one year maintenance supportthrough single source procurement method , a. price schedule for existing studio: , studio camera system , supply, installation, testing & commissioning of professional cam camera • standard accessories• additional accessories: additional battery • memory card 256gb • camera soft carrying case • led video light for camcorder • high strength camera / teleprompter tripod stand with soft carrying case , supply, installation, testing & commissioning of camcorder monopod with professional video head with soft carrying case , studio lighting , supply, installation, testing & commissioning of 200w led flood light tuneable , supply, installation, testing & commissioning of 200w led video panel light tuneable & dimmable. , supply, installation, testing & commissioning of 200w led fresnel spotlight, tuneable & dimmable , supply, installation, testing & commissioning of studio pantograph lights track system with 10 numbers of extenders , supply, installation, testing & commissioning of ceiling general lighting led fixture , supply, installation, testing & commissioning of dmx lighting controller with rack mount photo isolator dmx splitter , video monitor & microphone system , supply, installation, testing & commissioning of cordless microphone dual with dual lapel microphone with compatible, cable / connectors & soft carrying case , supply, installation, testing & commissioning of wireless handheld microphone with compatible, cable / connectors & soft carrying case , supply, installation, testing & commissioning of 55 led tv with floor mounted, height adjustable stand , studio furniture , supply & installation of custom made general office desk with additional free standing side cabinet, keyboard drawer & other accessories , supply & installation of hydrolic anchoring chair , supply & installation of custom made office 3nos x2 seater sofa set with 2x center table & 1xcorner table , desktop ( pc ) for studio , supply & installation of desktop computer with keyboard, mouse & other accessories , b. price schedule for setup a new studio: , studio controls, video processing, streaming & content management system , supply, installation, testing & commissioning of software vc codec & media server with content management software , supply, installation, testing & commissioning of systems management laptop pc with carrying case , supply, installation, testing & commissioning of multi camera encoder / streamer, switcher / monitor & recorder , studio camera & teleprompter system , supply, installation, testing & commissioning of professional cam camera • standard accessories• additional accessories: additional battery • memory card 256gb • camera soft carrying case • led video light for camcorder • high strength aluminium alloy camera / teleprompter tripod stand with soft carrying case , supply, installation, testing & commissioning of camcorder aluminium alloy monopod with professional video head with soft carrying case , supply, installation, testing & commissioning of studio camera mounted 19 teleprompter with wireless remote, operator desktop console; with 1x4 hdmi distribution amplifier, with necessary stand, cable & accessories , supply, installation, testing & commissioning of speech master studio floor mounted teleprompter ( size 11 ) dual stand with necessary stand, cable & accessories , supply, installation, testing & commissioning of mobile presidential speech teleprompter ( size 17 ) with hard carrying case hdmi splitter with necessary stand, cable & accessories , studio lighting & backdrop system , supply, installation, testing & commissioning of 200w led flood light tunable , supply, installation, testing & commissioning of 200w led fresnel spotlight, tunable & dimmable. , supply, installation, testing & commissioning of 200w led video panel light tunable & dimmable. , supply, installation, testing & commissioning of dmx lighting controller with rack mount photo isolator dmx splitter , supply, installation, testing & commissioning of studio pantograph lights track system with 10 numbers of extenders , supply, installation, testing & commissioning of ceiling general lighting led fixture , supply, installation, testing & commissioning of studio led lights on air display with remote , supply, installation, testing & commissioning of custom made studio motorised backdrop system with chroma fabric of 15x 11 with remote , supply, installation, testing & commissioning of studio motorised backdrop system with croma fabric of 8x 11 with remote , video, sound reinforcement & audio microphone system , supply, installation, testing & commissioning of cordless microphone dual with dual lapel microphone with compatible, cable / connectors & soft carrying case , supply, installation, testing & commissioning of wireless handheld microphone with camera mountable receiver with compatible, cable / connectors & soft carrying case , supply, installation, testing & commissioning of ceiling microphone with compatible, cable / connectors & controller software , supply, installation, testing & commissioning of audio digital mixer with dsp with compatible, cable / connectors & controlling software with 8p poe network switch , supply, installation, testing & commissioning of wireless headphone with compatible bluetooth transmitter , supply, installation, testing & commissioning of wired headphone , supply, installation, testing & commissioning of audio amplifier , supply, installation, testing & commissioning of column speaker with wall mount stand , supply, installation, testing & commissioning of 8x8 hdmi matrix switcher with all cable, connector and accessories , studio civil & electrical work with acoustic treatment , supply & installation of armstrong acoustic false ceiling tile with armstrong ceiling grid system & all accessories ( including the removal of the existing false ceiling structure and its disposal ) , supply, installation, testing & commissioning of armstrong acoustic fabric wall panel gi wall grid system & all accessories , supply, installation, testing & commissioning of armstrong acoustic wooden slat panel gi wall grid system & all accessories. , supply, installation, testing & commissioning of anti static floor carpet tiles for studio floor & platform. , supply, installation & raising of the roof of the studio room and adjacent office room as per site requirement through necessary restructuring / alteration / removal of the existing ceiling ceiling / wall with 50mm pu insulation wall / ceiling panels mounted on ms frames with proper slopes with indoor lining of the wall cavities with 12mm fire retardant plywood with weather ceiling of the structure , supply & installation of custom built acoustic studio doors of 50 mm thickness with fixing of suitable laminates to be merged with wall panel; polished teak wood wall frame & accessories like hettich 2d adjustable concealed hinges, concealed door closer, handle and other necessary accessories etc , supply & installation of custom made equipment cabinet with modular accessories for drawers and cabinets as per the site requirement with sitting arrangement of the operator , supply & refurbishment of the studios mens room with architectural wall cladding film, internal concealed electrical point wiring, toilet lighting fixtures etc as per the site requirement , supply & installation of custom made executive premium grade office desk with executive premium grade chair for studio room as per site requirement , supply & installation of custom made 2 nos of studio premium lounge chairs with table / stool as per approved design , supply & installation of floor mounted aluminium raceway, floor junction box with all accessories & switches / sockets as per the site requirement , supply & installation of studio electrical accessories: electric distribution box x2 nos with mcbs, power switch box, power cable, dmx cable 5 core shielded, hdmi cable, data cable; cat6 cable, jelly filled telephone cable, microphone cable, speaker cable in conduits / casings with all type of connectors etc as per site requirement. , supply, installation, testing & commissioning of hvac system with hot & cold pump, vrv type odu: 5hp; cassette idu 4tr with fresh air intake function & filter with 1xwired remote unit & 1xwireless remote unit; with ceiling / floor mount stand, vrv copper piping, drainage / fresh air piping with complete with necessary thermal insulation etc , supply, installation, testing & commissioning of air purifier, 7 stage, ceiling mount cassette type , manpower for 1 year o & m , manpower for operation & maintenance of video conferencing & video recordings...
22
North Western Railway - Rajasthan
38575558 supply of nylon rope ladder complete with 1 dia. aluminum steps as per design. nylon rope of 25mm dia. with steps of 25mm dia. aluminum alloy corrugated tubing spaced at 12 c / c duly packed on both sides size 20 feet long with hook for hanging. [ warranty period: 30 months after the date of delivery ] ...
23
Rajasthan Rajya Vidyut Utpadan Nigam Limited - Rajasthan
38237536 procurement of complete double acting pneumatic air cylinders for dome valve installed in fly ash handling system including rcc main silo , double acting pneumatic cylinder (complete cylinder assembly) with exhaust valve. size 160x250 mm model: vnc s20 160 x250 mm max pr: 10 bar make: neucon/airmax/schader/pioneer cylinder type double acting, bore dia. 160mm, stroke length 250mm, piston rod dia 40mm, piston rod thread m36x2p, pneumatics connection 3/4 bsp, barrel material aluminum hard anodized, piston rod/shaft material bs 970 90, en 8 hard chorme plated, seals hi nitrile, end cover aluminum alloy alsi 132, operating pressure 6.3 bar, testing pressure 10 bar, temperature 0 to 80?c, mounting accessories swivel flange & rod end fork with exhaust valve (drawing attached for reference) , seal kit for above pneumatic cylinder. seals hi nitrile, operating pressure 6.3 bar,testing pressure 10 bar, temperature 0 to 80°c , double acting pneumatic cylinder (complete cylinder assembly) with exhaust valve. size 100x250 mm, model: vncs20100x250 mm max pr: 10 bar make: neucon/airmax/schader/pioneer cylinder type double acting, bore dia. 100mm,stroke length 250mm, piston rod dia 25mm, piston rod thread m20x1.5p, pneumatics connection 1/2 bsp, barrel material aluminum hard anodized, piston rod/shaft material bs 970 90, en 8 hard chorme plated, seals hi nitrile, end cover aluminum alloy alsi 132, operating pressure 6.3 bar, testing pressure 10 bar, temperature 0 to 80?c, mounting accessories swivel flange & rod end fork with exhaust valve (drawing attached for reference) , seal kit for above pneumatic cylinder. seals hi nitrile, operating pressure 6.3 bar, testing pressure 10 bar, temperature 0 to 80°c...
24
Indian Army - Rajasthan
38185735 bids are invited for workshop items tapping star screw isi marked , nails 2 inch 14 nos best quality , plastic giti 6mm isi marked , jigsaw blade t244d make bosch , jigsaw blade t101d make bosch , sanding round disk 4 inch x 60 nos isi marked , sanding round disk 4 inch x 80 nos isi marked , sanding round disk 4 inch x 120 nos isi marked , sanding round disk 6 inch x 120 nos isi marked , sanding paper 6 inch 320 nos isi marked , star bit isi marked , belt size 915 x 100mm x 60 nos make bosch , belt size 915 x 100mm x 80 nos make bosch , belt size 915 x 100mm x 120 nos make bosch , hammering drill bit 6mm make bosch , hammering drill bit 8mm make bosch , hammering drill bit 10mm make bosch , handle corner clamp 90 degree isi marked , double side scale aluminium alloy metallic 12 inch , zigsaw blade t 119b make bosch , sanding velcro disk 5 inch best quality , ph2 golden star bit make bosch , heavy turning chisel make bosch , ms pipe 1.5 inch x1.5 inch make tata , ms pipe 1 inch x1 inch make tata , ms sheet 8 feet x4 feetx1.5 mm make tata , welding rode isi marked total quantity : 935...
25
North Western Railway - Rajasthan
38038621 supply of interchangeable, preset torque wrench with pre set value locking and safety device.having a spigot dia. of 22 mmmade of single piece of aluminium alloy body.torque range: 140 620 nm ( 105 450 lbf. ft. ) net weight: 3kgs or less, length: 834.50 mmsupply along with 3 / 4 inch sq. drive ratchet head for vande bharat train . make gedore / armstrong / ridgid or superior....
26
Department Of Local Bodies - Rajasthan
38022764 tender for installation of algae removal unit at stp. 1 supply, installation, testing & commissioning of ozone generation unit based on corona discharge technology having following specifications ozone output specifications: ( ranges cover minimum maximum ) ozone output: 50 500 gms / hrgas flow rate: 1.67 167 slpm concentration ( % ozone by weight ) : 96% purityworking pressure: 20 psig power requirements:domestic: 115 vac, 60 hz, 5.0 a ( 15 amp service ) international: 230 vac, 50 hz, 2.5 a ( 10 amp service ) material and construction:enclosure: brushed stainless steelhigh precision machined ozone generator cell tested at 150 psig for leakso2 / o3 gas tubing: ptfe / 304 stainless steelinstallation and feed connection requirements:oxygen inlet: 0.25 swagelok ozone gas piping outlet: 0.25 swagelok electrical power: 110 120 vac, 1 phase, 50 / 60 hz, 4 amps full load control input / output inputs: remote enable: dry contact close to run remote control: 4 20 ma or 0 10 v ( 0 100% output ) optional outputs: normal operation: green led on , red led off alarm, not normal operation: green led on, red led on less than 70% production capacity alarm, not in operation: green led off, red led on local display: red led ozone output level display the unit shall be ensured to be stationed in humidity free environment which shall be protected against direct sunlight or rain and complete with accessories and peripherals complete 2 supply, installation, testing & commissioning of oxygen concentration unit based on vaccum pressure swing adsorption unit.an oxygen concentrator is a self contained, electrically powered medical device designed to concentrate oxygen from ambient air. utilizing a process known as pressure swing adsorption, an oxygen concentrator produces up to 95.5% concentrated oxygen. atmospheric air is drawn through a gross particle and intake filter before moving through a compressor. the pressurized air passes through a heat exchanger to reducethe temperature before entering sieve beds that contain zeolite, a mineral material that preferentially adsorbs nitrogen gas ( n2 ) at high pressures. as each sieve bed is depressurized, n2 is released. valves open to deliver concentrated oxygen into a reservoir where it accumulates, and from which a flowmeter can be used for measured. and continuous release of oxygen to the patient at a specified flow rate. specifications:the unit shall be mounted on 4wheeels at each corner.the oxygen concentrator should be consisting of gross particulate filter , intake filter, compressor, heat exchanger, zeolite 4a sieves, equalization & check valves, pressure release valves, dehumidifier for oxygen & control unit. oxygen purity delivery >82%flow control: inbuilt flowmeter and flow rate control.the flowmeter shall provide continuous flow rate control, with markings from 0 lpm to the maximum rated flow rate, at a minimum of 05 lpm intervals.the oxygen concentrator shall be capable of generating at least 55 kpa at all flows up to the maximum rated flow. the oxygen concentrator shall incorporate alarms for alerting the user of fault conditions › low oxygen concentration ( <82% ) , no flow , power supply failure. the oxygen concentrator shall have at least one oxygen outlet for direct attachment of oxygen delivery tubing. the outlets shall be barbed fittings and should be recessed or made out of materials that will not be easily bent or broken to avoid damage. • the oxygen concentrator shall incorporate gross particle filters to prevent dust and grime from entering the enclosure and air inlet.all user removable filters shall be cleanable. cleaning instructions for filters shall be included in the instructions for use. the oxygen concentrator shall produce no more than 50 db ( a ) of noise when operating. the oxygen concentrator shall be supplied with an appropriate service manual with full details of advanced maintenance and a list of spare parts 3 supply, delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and commissioning of horizontal centrifugal split casting pumps with motor as per is 12615 2011 or amended up to date, ci casing and casing ring, ss 316 impeller, ss 410 shaft and shaft sleeve, coupling guard, common base plate, foundation bolts etc. complete with all respect as per the specification discharge 121 to 140 lps and head 61 to 70 m 4 venturi system for mixing ozone with effluent supply, installation, testing and commissioning of venturi for mixing of ozone gas with effluent at the facultative pond at wsp. the air flow capacity shall be designed for mixing ozone of maximum of 250 gms per hours with the effluent at flow rate of 200 400 m cube / hr . the operating pressure shall be maximum of 90 psig comprising of inlet , outlet and suction port, metering valve , check valve and flow control valve. 5 providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron ( di ) isi marked k 7 grade s&s pipes as peris:8329 2000 ( amended up to date ) , with internal high alumina cement ( hac ) mortar lining for gravity sewer network with rubber ring ( epdm ) joints as per is: 5382 1985 ( excluding special accessories ) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer.200mm 6 providing, lowering, laying in trenches, aligning, fixing in position and jointing socketed rubber gasket type isi marked upvc pipes ofclass iii ( 6 kg / sqcm ) suitable for potable water with rubber ring joints ( as per is 4985 2000 ) of following outer dia with all accessories ( excluding specials ) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. note : e / w to be measured and paid separately.160 mm dia 7 125mm dia 8 sitc of wall / free standing floor mounted dust and vermin proof compartmentalised cubical panel as per pwd specification for electrical works, made out of crca sheet . other parameters required as per point ( a ) , ( b ) , ( c ) , ( d ) below: ( a ) thickness of sheet shall not be less than 1.6 mm up to 600 mmlength / width of any compartment and be of 2.0 mm above 600 mm. load bearing structure shall be of 2.0 mm thick sheet supported by base m.s. channel if required . side walls and cable alley compartments having bolted type doors with / without detachable extension type structure ( b ) panel shall be duly treated for derusting in 7 tank process with dephosphating and with powder coating of minimum 70 microns on both side of panel in desired shade the panel having pu / neoprene rubber gasket of not less than 3mm thickness , required hardware, separate detachable gland plate m.s. base channel ( min75mm ) , hinged door with locking arrangement for equipment / switchgear. ( c ) interconnection between bus bar and switchgears / cable shall be rigidly supported and made out by flexible copper wires ( up to 125 amp ) and by solid bus bar ( >125 amp ) . all joints / interconnections of copper bus bar shall be dully tinned . clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar bus bar is insulated by heat shrinkable sleeves . earth and neutral bus bar shall be half of the size of phase bus bar. ( d ) only outer area on all sides shall be measured & panel to be fabricated only from cpri approved fabricator. all as per drawing pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 9 supplying and fixing of aluminium ( iec 60105 iso 209 1, 2 ) / copper ( iec 60028 ) bus bar as per pwd specification for electrical works, by means of smc / dmc type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable pvc sleeves. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr electrolytic grade aluminium bus bar 6010 grade 10 providing & fixing of ip 51 ( upto 500 ) v range volt meter on existing panel as per pwd specification for electrical works, making connection by pvc insulated copper conductor with pvc sleeves / channel etc. meter shall give true rms measurments, acc. ci 1.0 or better , with field programmable primary & sec. values pt ( vt ) primary upto 2000 kv. field programmable high and low threshold values, meter shall compliance of is 13875 & iec 61236. as required. oem must have bis certificate and & shall have submit nabl / cpri / erda lab test reports before execution &all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsrdigital type 11 providing & fixing of ct operated direct reading type ip 51 ampere meter on existing panel as per pwd specification for electrical works, making connection by pvc insulated copper conductor with pvc sleeves / channel etc. ampere meter shall givetrue rms measurement, acc. cl 1.0 or better , measuring current range 50 ma to 6 a, with field programmable primary and secondary values ct primary up to 15000 a, field programmable high and low threshold values as required. compliant to is 13875, & iec 61326. oem must have bis certificate and & shall have submit nabl / cpri / erda lab test reports before execution &. all as perpre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . below 500 a 12 providing & fixing of ip 51 multi function meter as per pwd specification for electrical works, isi marked ( is 16444 ) / confirming to iec 61557 & iec 62052 with lcd / led 3 / 4 line display capable of measuring electrical parameters like v, i, f, pf, kw, kva, kvar, kwh, kvah, kvarh display with 1a / 5a ct input for lv / hv network, with / without rs 485 communication port etc. oem must have bis certificate and & shall have submit nabl / cpri / erda lab test reports before execution & complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsrmultifunction lcd meter with v, i, f, pf, kw, kva, kvar, kwh, kvah, kvarh, run hours, on hours, phase angle, interrupts, thd, events, neutral current class 1 accuracy with rs485 port. 13 providing & fixing of self healing ip20 mpp type shunt capacitor ( banks ) as per pwd specification for electrical works, isi markedis:13340 41 / conforming to iec :831 1&2 or iec : 60831 1& 2 in existing panel or parallel with load terminals , the capacitor shall befitted with discharge resistors, pressure sensitive disconnector ( psd ) and shall have dissipation factor less than 0.0025 at 50 hz andtotal wattage loss less than 0.35 watt per kvar. min over current capacity 1.8 times rated current & peak inrush current min. 250times of rated current, including making connections, testing etc. as required. all as per pre approved by engineer in charge. foradditional technical parameters of products / work , refer annexure a attached with this bsr .heavy duty three phase 525 v, 50 hz cylindrical capacitor ( bank ) 14 providing & fixing of ip54 on front microprocessor based three phase sensing power factor correction relay , iec / en 61000 6 ( 2&4 ) having 3 ct sensing, sensitivity up to 50 milli amp secondary current , self analysing auto c / k setting according to targeted powerfactor setting, the relay shall have digit display unit for display of real power factor, targeted power factor, lag / lead capacitor switchingstatus, alarm output for under current, over current, insufficien compensation, communication interface with rs 485, indication ofswitching on units, auto / manual status, and shall have over load protection, no volt release , having multi parameter like kw, kva, kvar, vthd, ithd, metering facility as required. oem shall have submit nabl / cpri / erda accrediated lab test reports. all asper pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached withthis bsr 6 to 8 stage 15 sitc of ip 40 3 pole current limiting moulded case circuit breaker ( mccb ) made of flame retardent & heat resistant material havingfollowing current rating, short circuit breaking capacity at 440 / 41v, 50 hz; o / l & s / c settings as per pwd specification for electrical works, conforming to is / iec 60947 p 2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and withoutderating upto 40 degree, pollution degree 3, having positive isolation capability, push ( test ) to trip, trip time less then 10 msunder s / c condition, breaking capacity ics = 100% icu. u imp =8 kv, rated insulation voltage 800 v, provision for uvr , shunt trip , earthfault trip, door interlock, pad lock & rotary handle , including makin connections with lugs & spreaders, etc. as required. oem shallhave submit nabl / cpri / erda accrediated lab type test certificate before execution. all as per pre approved by engineer incharge. for additional technical parameters of products / work , refer annexure a attached with this bsr . with microprocessor based release630 amp , 50 ka, adjustable o / l & adjustable s / c setting, ics = 100 % icu 16 providing & fixing of iso certified company made bus bar chamberhoused in sheet metal box as per pwd specification for electrical works confirming to iec 60439 / is 8623 & iec 60529 / is 2147 made out from 1.6 mm thick powder coated crca sheet, degree of protection ip 31, front openable bus bar made out of aluminium or wrought aluminium alloy suitable for 100 amp. capacity , bus bar fixed on porcelain / dmc insulators at approved spacing including making connections etc. as required. appropriate type test certificate / oem test report shall be submitted . all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 17 providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed unarmoured / armoured aluminium cable of 1.1 kv grade as per pwd specification for electrical works in existing rcc / hume / stoneware / pvc pipe / open duct / cable trench with filling of excavated earth in trench , on existing cable trays or on surface etc including making necessary connection, testing etc. as required of size and as per points ( a ) , ( b ) , ( c ) , mentioned below: ( a ) material : h4 grade aluminium conductor of purity >99.6 % & as per is:1554 p i / is :7098 p – i ( b ) conductor shall have electrolytic aluminium confirming to is 8130, is 3975 1999 for armouring of cables in armoured cable items , is 5831 for sheath, is 10810 ( part 0 to 64 ) for testing procedures. ( c ) oem must have iso 9001 & 14001 certifications for quality assuarance & its own in house nabl lab setup for all testing facilities for cables . appropriate type test certificate / oem test report shall be submitted . all above as per pre approved byengineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr.armoured cable16.0 sq. mm 4 core 18 25.0 sq. mm4 core 19 providing and fixing t iron frames for doors, windows and ventilators of mild steel tee sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 20 providing, lowering, aligning, fixing in position in pipe line, di double flanged resilient seated dual plate check valve of approved make of following pressure rating & dia complete, as per api: 594 / api: 598 and of following specifications: body & bonnet of ductile cast iron of grade ggg40 / ggg50 as per din 1693 or gr sg 400 / 12 as per is 1865 or equivalent grade as per is :3896 part2 1985 and subsequent revisions, disc / plates sg 400 / 12 or cf 8m, face to face dimensions as per api: 594 , flanges drilled as per is:1538. electrostatic epoxy powder ( ep p ) / fusion bonded epoxy ( non toxic & suitable for drinking water ) coated with minimum thicknessof 250 micron applied on body and cover inside and outside . disc seal ring of epdm / neoprene ( food grade quality ) and disc seal retaining ring of ss / cs. shaft of ss aisi 304 / 410 , hinge ss aisi 316 / 304, spring ss aisi 316 / 304, bonnet gasket epdm , bushbrass with epdm / nbr o ring seal, nut bolt confirming to is:1363 and is: 1367 ( galvanised steel ) , insertion rubber of black epdm 6mm thick .suitable support structure as per directions of eic including jointing & jointing material, labour, testing andcommissioning along with pipeline as per technical specification & as per direction of engineer in charge. note: rates are exclusive of tail piece / dismantling joints and earth work250 mm dia 21 providing, lowering, laying, aligning, fixing in position in pipe line, manually operated ci d / f sluice valves of approved make ( is: 14846 amended upto date ) pn 1.0 class of following dia complete ( including jointing and jointing material ) including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer.250 mm dia 22 providing, lowering, laying in trenches, aligning, fixing in position and jointing upvc pipe fittings / accessories of class iii ( 6 kg / sqcm ) confirming to is:7834 suitable for potable water with rubber rings joints in upvc pipe line at all levels / depth including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. equal tee socket 23 double / single socketed 90 degree long bend ( single piece weldedwith socket ) 24 end cap 25 200 nb upvc isolation butterfly valvescivil works for routing of pipes and finishing works 26 providing and laying un reinforced, dowel jointed, plain cementconcrete mix in pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate conforming to is: 383, maximumsize of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to linespcc m 25 27 desludging of septage from soak wells / pits / septic tanks and transporting and emptying at inlet of fstp including operation and maintenance of the equipment with all accessories complete in all respect over the o&m period as per specification and direction of engineer.o&m for 4000 liter truck...
27
Rajasthan Rajya Vidyut Utpadan Nigam Limited - Rajasthan
37860579 procurement of complete double acting pneumatic air cylinders for dome valve installed in fly ash handling system including rcc main silo , double acting pneumatic cylinder (complete cylinder assembly) with exhaust valve. size 160x250 mm model: vnc s20 160 x250 mm max pr: 10 bar make: neucon/airmax/schader/pioneer cylinder type double acting, bore dia. 160mm, stroke length 250mm, piston rod dia 40mm, piston rod thread m36x2p, pneumatics connection 3/4 bsp, barrel material aluminum hard anodized, piston rod/shaft material bs 970 90, en 8 hard chorme plated, seals hi nitrile, end cover aluminum alloy alsi 132, operating pressure 6.3 bar, testing pressure 10 bar, temperature 0 to 80?c, mounting accessories swivel flange & rod end fork with exhaust valve (drawing attached for reference) , seal kit for above pneumatic cylinder. seals hi nitrile, operating pressure 6.3 bar,testing pressure 10 bar, temperature 0 to 80°c , double acting pneumatic cylinder (complete cylinder assembly) with exhaust valve. size 100x250 mm, model: vncs20100x250 mm max pr: 10 bar make: neucon/airmax/schader/pioneer cylinder type double acting, bore dia. 100mm,stroke length 250mm, piston rod dia 25mm, piston rod thread m20x1.5p, pneumatics connection 1/2 bsp, barrel material aluminum hard anodized, piston rod/shaft material bs 970 90, en 8 hard chorme plated, seals hi nitrile, end cover aluminum alloy alsi 132, operating pressure 6.3 bar, testing pressure 10 bar, temperature 0 to 80?c, mounting accessories swivel flange & rod end fork with exhaust valve (drawing attached for reference) , seal kit for above pneumatic cylinder. seals hi nitrile, operating pressure 6.3 bar, testing pressure 10 bar, temperature 0 to 80°c...
28
North Western Railway - Rajasthan
37835863 supply of interchangeable, preset torque wrench with pre set value locking and safety device.having a spigot dia. of 16 mmmade of single piece of aluminium alloy body.torque range: 80 400 nm ( 60 300 lbf. ft. ) weight: 2.00 kgs. or less, length: 633mmsupply along with 1 / 2 inch sq. drive ratchet head for vande bharat train . make gedore / armstrong / ridgid / similar ....
29
Department Of Atomic Energy - Rajasthan
37710289 bids are invited for wrought aluminium and aluminium alloys bars, rods and sections (general engineering purposes) is:733 (q3) total quantity : 20...
30
Medical And Health Services - Rajasthan
37689695 supply of x ray and ecg items tender to buy x ray films, ecg jelly, ecg paper roll etc. at govt. dist. hospital, sri ganganagar , x ray film blue base blue sensitive high speed14”x17”fuji//nieue plus/vms / carestream/agfa/konika/ laser/e ray , x ray film blue base blue sensitive high speed 12”x15”fuji//nieue plus/vms / carestream/agfa/konika/ laser/e ray , x ray film blue base blue sensitive high speed 10”x12” fuji//nieue plus/vms / carestream/agfa/konika/ laser/e ray , x ray film blue base blue sensitive high speed 8”x10”fuji//nieue plus/vms / carestream/agfa/konika/ laser/e ray , dental x ray film high speedsize 2 [3cm*4cm fuji//nieue plus/vms / carestream/agfa/konika/ laser/e ray , x ray developer liquidfor automatic film processorto make 19 ltr. kodak/photon/carestream/fuji/champion , x ray fixer liquid for automatic film processorto make 19 ltr. kodak/photon/carestream/fuji/champion , digital x ray film dry view dve laser imaging film 8x10carestream [proprietary item] , digital x ray film dry view dve laser imaging film 10x12carestream [proprietary item] , fuji medical dry imaging films 8”x10” di hlfuji [proprietary item] , fuji medical dry imaging films10”x12” di hlfuji [proprietary item] , manual alluminium alloy xray cassette with intensifyscreen speed 800, blue sensitive14”x17” kiran/fujifilm/atico/ super photo chem , manual alluminium alloy xray cassette with intensifyscreen speed 800, blue sensitive 12”x15” kiran/fujifilm/atico/ super photo chem , manual alluminium alloy xray cassette with intensifyscreen speed 800, blue sensitive 10”x12” kiran/fujifilm/atico/ super photo chem , manual alluminium alloy xray cassette with intensifyscreen speed 800, blue sensitive 8”x10” kiran/fujifilm/atico/ super photo chem , direct view cr cassette with pq screen for dv classic cr14”x17” carestream [proprietary item] , direct view cr cassette with pq screen for dv classic cr 14”x14” carestream [proprietary item] , direct view cr cassette with pq screen for dv classic cr10”x12” carestream [proprietary item] , lead number (0 9) & (r&l) per set , dental x ray film holder , dental x ray film developer & fixer each 2.25 lts. , chest stand iron floor model , x ray view box (single film) , ecg jelly 250 ml /each , ecg paper roll (single channel) bpl / 50mmx20mtrs , ecg paper roll (three channel) bpl / 80mm x20mtrs , ecg paper roll (three channel) cardio fax 3r/other / 106mmx20mtrs , ecg paper roll (three channel) bpl / 108mmx20mtrs , ecg paper roll (6 channel) bpl / 120mmx15mtrs , ecg paper roll 210mm x 20ml/comon , usgroll / 110mmx20mtrs , usg jelly/ 250ml , ecg roll 8108 , ecg roll 8108 view (z fold) , ecg leads , ecg cups , b.p. instrument (digital) , b.p. instrument (led) , b.p. instrument (mercury) , b.p. bulb , b.p. cuff , b.p. bladder , b.p. regulator...
31
Department Of Local Bodies - Rajasthan
37370165 annual rate contract for electrical maintenance work with equipment for sub offices of municipal corporation bikaner. 1 wiring of light point / fan point / exhaust fan point / call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade ( is:694 ) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade ( is:694 ) in recessed isi marked mms ( is:9537 p iii ) vergin material pvc conduit & its all accessories ( j.b. , bends etc. ) , round tiles, 18 swg g.i. box with earth terminal, 6 a switch , 3 pin ceiling rose / lamp holder / 3 point connector, 3.0 mm thick isi marked phenolic laminated sheet ( is : 2036 1995 ) , al. alloy / cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheets & electrical / wiring accessories refer chapter e 04, e 05 & e 07 . for additional technical parameters of products / work , refer annexure a attached with this bsr . short point ( up to 3 mtr. ) 2 medium point ( up to 6 mtr. ) 3 long point ( up to 10 mtr. ) 4 wiring of 3 / 5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade ( is:694 ) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade ( is:694 ) in recessed isi marked mms ( is:9537 p iii ) vergin material pvc conduit & its all accessories ( j.b. , bends etc. ) , round tiles, 18 swg g.i. box with earth terminal of required size, 6 a switch, 3 / 5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet ( is : 2036 1995 ) , al. alloy / cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheets & electrical / wiring accessories refer chapter e 04, e 05 & e 07. for additional technical parameters of products / work , refer annexure a attached with this bsr . on board 5 short point ( up to 3 mtr. ) 6 medium point ( up to 6 mtr. ) 7 long point ( up to 10 mtr. ) 8 s&f following sizes ( dia. ) of isi marked mms ( is:9537 p iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories ( is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr .mms ( is:9537 p iii ) pvc conduit 25mm 9 mms ( is:9537 p iii ) pvc conduit 32mm 10 supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked ( is:694 ) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm ) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a or c , flame retardant as per is 10810 53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc / ms conduit / casing capping including all as per pre approved by engineer in charge, making connections, etc. as required. oem must have its own in house nablab setup for all testing facilities for wires. for additional technical parameters of products / work , refer annexure a attached with this bsr .1 x 1.5 sq.mm 11 2 x 1.5 sq.mm 12 1 x 2.5 sq.mm 13 2 x 2.5 sq.mm 14 2 x 4.0 sq.mm 15 supply & drawing wiring for sub mains as per pwd specification for electrical works with isi marked ( is:694 ) , 1100 volts grade pvc insulated flat twin core sheathed solid aluminium conductor with 10 swg g.i. support wire duly clipped including all as per pre approved by engineer in charge, making connections, as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products / work , refer annexure a attached with this bsr . 4.0 sq.mm 16 6.0 sq.mm 17 10.0 sq.mm 18 supplying and laying isi marked p.v.c. insulated submersible cable as per pwd specification for electrical works confirming to is:694 and as per is 8130 : 2013 of 1.1 kv grade .wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm ) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a or c , flame retardant as per is 10810 53, better amperage rating as per vde 0298 part 4 including making connection etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. all as per pre approved by engineer in charge, making connections. for additional technical parameters of products / work , refer annexure a attached with this bsr . 2.5 sq.mm 3 core flat / round. 19 providing & fixing of 240 / 415 v ac mcb with positive isolation of breaking capacity not less than 10 ka ( b / c tripping characteristic as per type of load and site requirement ) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828 ( 1996 ) / conforming to iec 60898 1 2002, iec 60947 2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board / sheets, min. operation 20, 000 upto 32 a rating and 10, 000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . single pole mcb 6 a to 32 a rating 20 double pole mcb6 a to 32 a rating 21 four pole mcb40 a rating 22 four pole mcb50 63 a rating 23 providing & fixing of ik09 recessed / surface mounting heavy duty horizontal type sheet steel not less then 1.2 mm thick distribution board as per pwd specification for electrical works isi marked conforming to is 13032 & is 8623 / conforming to iec 61439 3. phosphatised / powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link , connecting wire of suitable rating and din bar, masking sheet, including making internal db terminations with copper lugs and with detachable gland plate, including making connections, testing etc. as required.oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . ip 43 double door ( single phase ) . 8 way ( 8 o / g +2 i / c ) 24 ip 43 double door ( three phase ) 8 way ( 24 o / g + 8 i / c ) 25 providing & fixing of isi marked ( is :3854 ) 6 amp. flush type non modular switch as per pwd specification for electrical works, made out from industrial grade polycarbonate or fire resistant abs material, minimum width of switch toggle ( push part ) should not less then 16 mm, brass terminal & captive screws including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 26 providing & fixing of isi marked ( is :3854 ) 16 amp. flush type non modular switch as per pwd specification for electrical works, made out from industrial grade polycarbonate or fire resistant abs material , minimum width of switch toggle ( push part ) should not less then 16 mm, brass terminal & captive screws including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 27 providing & fixing of of 3 pin 6 amp. flush type non modular socket as per pwd specification for electrical works, made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 28 providing & fixing of 3 / 6 pin 16 amp flush type non modular socket as per pwd specification for electrical works, made out fromindustrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 29 providing & fixing of isi marked ( is :3854 ) 6 amp. combined flush type non modular socket and switch set as per pwd specification for electrical works, made out from industrial grade polycarbonate or fire resistant abs material, minimum width of switch toggle ( push part ) should not less then 18 mm, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 30 providing & fixing of isi marked ( is :3854 ) 16 amp. combined flush type non modular socket and switch set with indicator and fuse set as per pwd specification for electrical works, made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 31 providing and fixing of non modular power plug point accessories as per pwd specification for electrical works with 18 swg g i box of size 175 x 100 x 60 mm with earthing terminal / connector on recessed / surface with suitable size phenolic laminated sheet ( is : 2036 1995 ) cover including cost of 16 amp. switch ( is :3854 ) and 3 / 6 pin 16 amp. socket outlet [ as per detailed in respective item in bsr ] , making connection , testing , etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 32 providing & fixing of isi marked ( is:1293 ) 6 amp unbreakable 3 pin plug top with lamp indicator as per pwd specification for electrical works, made out from industrial grade polycarbonate or fire resistant abs material, brass terminal including making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 33 providing & fixing of isi marked ( is:1293 ) 16 amp unbreakable 3 pin plug top with lamp indicator as per pwd specification for electrical works, made out from industrial grade polycarbonate or fire resistant abs material, brass terminal including making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 34 providing & fixing of non modular socket size flush type 120 watt rotary minimum 5 step fan regulator as per pwd specification for electrical works, isi marked ( is:11037 ) made out from industrial grade polycarbonate or fire resistant abs material including making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 35 providing & fixing of isi marked ( is:2268 1994 ) single / multi tone electronic call bell as per pwd specification for electrical works, including making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 36 supply, fixing and testing of following capacity wall mounted stablisers having output voltage variation from 200v to 250v ( + / 5% ) with input voltage variation from 170v to 260v, time delay facility from 2 to 4 minute and high cutoff at 270v complete in all respect e074601 3 kva 37 providing & fixing of ip51 direct or ct operated, 1x240 / 3x240 volts, 50 hz static watt hour meter ( kwh ) as per pwd specification for electrical works, isi marked ( is :13010 2002 ) having resolution 0.1 / 0.01 kwh , accuracy class 1 as per is:13779, led indicators for tamper operation ( reverse & / or earth connection ) , pulsating led indicator for meterology , lcd display, cover plate for body and terminal sealing , push button for all standard parameters, including making connection , testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 10 a to 60 ampere single phase meter. 38 providing & fixing of iso certified company made tp&n 415 v side handle operated double break fuse switch unit in sheet steel enclosure as per pwd specification for electrical works conforming to is / lec 60947 3 : 1999 ( w / o hbc fuses ) including making connections with suitable lugs, testing etc. as required. appropriate type test certificate / oem test report shall be submitted . all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 100 a rating 39 providing & fixing of iso certified company made 240 / 415 v porcelain kitkat fuse ( / hbc type ) as per pwd specification for electrical works conforming to is:2086, 1983 on existing board / sheet including making connections with lugs, testing etc. as required . appropriate type test certificate / oem test report shall be submitted . all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 63 a , 415 v. 40 100 a , 415 v 41 providing & fixing of iso certified company made bus bar chamber housed in sheet metal box as per pwd specification for electrical works confirming to iec 60439 / is 8623 & iec 60529 / is 2147 made out from 1.6 mm thick powder coated crca sheet, degree of protection ip 31 front openable bus bar made out of aluminium or wrought aluminium alloy suitable for 200 amp. capacity , bus bar fixed on porcelain / dmc insulators at approved spacing including making connections etc. as required. appropriate type test certificate / oem test report shall be submitted . all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 300 mm long , 4 strip. 42 providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed unarmoured / armoured aluminium cable of 1.1 kv grade as per pwd specification for electrical works in existing rcc / hume / stoneware / pvc pipe / open duct / cable trench with filling of excavated earth in trench , on existing cable trays or on surface etc. including making necessary connection, testing etc. as required of size and as per points ( a ) , ( b ) , ( c ) , mentioned below: ( a ) material : h4 grade aluminium conductor of purity >99.6 % & as per is:1554 p i / is :7098 p – i ( b ) conductor shall have electrolytic aluminium confirming to is 8130, is 3975 1999 for armouring of cables in armoured cable items , is 5831 for sheath, is 10810 ( part 0 to 64 ) for testing procedures. ( c ) oem must have iso 9001 & 14001 certifications for quality assuarance & its own in house nabl lab setup for all testing facilities for cables . appropriate type testcertificate / oem test report shall be submitted . all above as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr. e110110 un armoured 16.0 sq. mm 4 core. 43 un armoured25.0 sq. mm 4 core 44 providing & laying of double wall corrugated pipe confirming to is : 14930 p 1 & 2 with hdpe coupler at 1 mtr. depth below the ground for laying cable including making the trench and back filling , compaction of earth as required ( excavation of earth to be paid extra as required. ) of following outer dia. / inner dia as per is:4984:1995. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr .55 / 50 mm. 45 sitc of chemical gel earthing system of dual pipe technology made of with b class g i pipe as per is 1239 ( part 1 ) :2004 of medium duty of following sizes as per points mentioned ( a ) , ( b ) , [ c ) , ( d ) , ( e ) below : ( a ) filled with anti corrosive conductive compounds with the permanent sealings at both the ends, cpri / erda tested with rms capacity of minimum 35 40 ka for withstanding 1 second . ( b ) to ensure the moisture content and electrical conductivity, 25 kg for 2000 mm & 50 kgs for 3000mm of resistance lowering earth enhancement material shall be used as a backfill compound. the compound shall be tested form nabl acredeated lab for low resistivity ( less than 0.12 ohm meter ) & high conductivity in nature with carbon as a major content as per referance of is 3043 1987, ieee 80 2013 ( clause 14.5d ) , ieee 837 & ier 1956 with latest amendemnts ( c ) heavy duty weather proof poly propylene earth pit chamber with lockable jam free lid suitable for safe working load 5000 kg or more of size top dia. 225 to 260 mm, bottom dia 300 to 350 mm. and height 250 to 300 mm. ( d ) testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. ( e ) self certificate for confirming above standards from oem is mandatory. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . e140510 with pipe in pipe technology ( outer pipe dia. / inner pipe dia. ) minimum 100 mm dia borewell gi pipe 2000 mm long, 50 / 25mm, terminal 40mm x 6 mm gi strip. 46 supply & laying following size earth strip in horizontal or vertical run in ground / surface / recess including riveting, soldering, saddles, jointing shall be done by overlapping and with 2 set of brass ( for custrip ) / gi ( for gi strip ) nut bolt & spring washer spaced at 50cm making connection etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 25mm x 3mm g.i. ( hot dipped ) strip 47 supply & laying following size earth wire in horizontal or verticalrun in ground / surface / recess including riveting, soldering, saddles, making connection with gi / cu thimble etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 8 swg copper wire. 48 providing & fixing of iso certified company made bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan as per pwd specification for electrical works, conform to all the performance requirements laid down in is:374 2019 including all amendments, as applicable ; & carry bis licensing ( i.e. isi marking ) or quality certification such as iso 9001 or above. with down rod up to 30 cm with secondary support. 1200 mm sweep bee 2 star rated ( service value >=4.5 to < 5 ) . 49 providing & fixing of of double ball bearing, copper wounded capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible 3 core copper conductor , making connections, testing etc. as required. oem shall be an iso certified company. appropriate oem test certificate shall be submitted by contractor. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 225 mm sweep 50 providing & fixing of heavy duty capacitor start, copper wound double ball bearing 900 / 1400 rpm single phase exhaust fan as per pwd specification for electrical works, conforming to is:2312 isi marked in existing opening including making connections testing etc. as required. oem shall be an iso certified company. appropriate oem test certificate shall be submitted by contractor. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 300 mm sweep ( 900 / 1400 rpm ) . 51 providing & fixing of capacitor start, copper wound, metal body, metal blade three speed wall mounting fan of following sweep with the help of anchor bolts including making connection testing etc. as required. oem shall be an iso certified company. appropriate oem test certificate shall be submitted by contractor. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 400 mm sweep ( oscillating type ) . 52 providing & fixing of fluorscent tube rod in existing fixtures as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . flourscent powder coated. 36 / 40 watts. 53 providing & fixing of energy efficient / energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm / watt output , pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k / 6000°k / 6500°k ( as per ansi bin ) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c. ) . manufactures word mark / name engraved / embossing / screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. ( lm79 / lm80 ) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . foe additional technical parameters of product / work, refer annexure a attacheded with this bsr. 9 watt 54 15 watt 55 rewinding of ceiling fan motor ( starting and running winding ) including all necessary material. the motor is to be wound taking no. of coils, turns and pitch as it was originally wound with required size super enamelled wire with e class insulation material and making connections etc. as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. ( new model ceiling fan ) . 900 / 1200 mm sweep ( new model ceiling fan ) 56 labour charges for removing and refixing of ceiling fan / exaust fan from site 57 charges for oiling, overhauling of ceiling fan, table fan, pedestal fan irrespect to the size of fan including removing, refixing of fan from site and testing etc. as required. fans with removing & refixing at suitable location. 58 providing and replacement of ball bearing of ceiling / exhaust fan and refixing the same at suitable location as requiredand as per oem recommendations. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 59 p & replacement of cover / bearing seat of ceiling / exhaust fan. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 60 p & f aluminium blades ( a set of 3 blades ) duly painted and well finished 900 / 1200 mm. the material of the fan blade shall be of designation 31500b with condition hx6 aluminium alloy sheet confirming to is 737 / 2008. 61 servicing and overhauling of 20 sweep desert cooler including oiling, greasing, painting of tank from inside with rubber paint after properly desmantling each assembly and refixing the same as required. 62 painting of desert cooler with two coats of rubber paint inside of water tank and two coat of synthetic enamelled paint on both side of cooler body, fan body, grills etc.after cleaning with sand paper, complete in all respect as required. 63 replacement of cooler pads ( heavy ) set of 3 no. of size 25 x 27 64 p & f aluminiun blade for 20 desert cooler fan as required. 65 p & f of isi marked vertical pump suitable for 20 desert cooler including making connection testing etc. as required. isi marked vertical pump. 66 p & f fan motor suitable for 20 desert cooler including making connection testing etc. as required. with copper winding motor isi marked. 67 rewinding of heavy duty exhaust fan motor including all necessary material, the motor is to be wound taking no. of coils, turns and pitch as it was originally wound with required size supernamelled wire with e class insulation material and making connections etc. as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 300 / 380 mm sweep. 68 rewinding of motor of desert cooler pump with super enamelled copper wire, e class insulation material including removing, refixing, testing etc. as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 69 rewinding of motor of desert cooler fan with super enamelled copper wire, e class insulation material including removing, refixing, testing etc. as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by thecontractor. 70 supplying and charging of fresh refrigerant and testing of performance of air conditioner / fridge / water cooler of following capacity including capillary and strainer / filter. 1.5 tr window / split a.c. 71 2.0 tr window / split a.c. 72 25 / 50 / 40 / 80 ltr. water cooler 73 replacement of defective compressor by company repaired compressor as per oem recommendations of following gadgets including testing etc. as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 1.5 tr a.c. 74 2.0 tr a.c. 75 25 / 50 / 40 / 80 ltr. water cooler 76 p & replacement of condensing / cooling coil of copper fins for following capacity a.c. / water cooler / fridge as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 1.5 tr a.c. 77 2.0 tr a.c. 78 25 / 50 / 40 / 80 ltr. water cooler 79 servicing of 1.0 / 1.5 / 2.0 tr capacity split / window type air conditioner. 80 p & replacement of overload protection of a.c. / water cooler as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 81 p & replacement of thermostat of a.c. / water cooler / fridge as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 82 p & replacement of selector switch of 1.0 / 1.5 / 2.0 tr a.c fan as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 83 p & replacement of starting relay of a.c / water cooler / fridge compressor as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 84 s & f of capacitor of 230v / 275v, 50hz rating of plastic casing and terminals lugs or copper wire. starting capacitor.40 60 micro farad. 85 60 80 micro farad. 86 running capacitor 2.5 / 3.15 micro farad. 87 4.0 micro farad 88 6.0 micro farad 89 8.0 micro farad 90 10.0 micro farad 91 providing & fixing of ip20 led surface / recessed / suspended mounting mid power smd type led light fixture made from crca sheet steel housing, high purity / transmisivity uv stabilized non yellowish diffuser for uniform light distribution. high efficiency with 2.5 kv internal / external surge protection bis certified isolated driver having efficiency > 85% , with short & open circuit protection and in compliance to iec standards ( integral with light fixture ) . system lumen efficacy min. 100 lm / watt , thd < 10 % , p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k / 6000°k / 6500°k ( as per ansi bin ) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c. ) . manufactures word mark / name engraved / embossing / screen printing on housing. oem must have its own in house nabl acredeated lab setup for all testing facilities for led fixtures. ( lm79 / lm80 ) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product / work, refer annexure a attacheded with this bsr. recessed mounting 48w led light fixture 2x2 with acrylic / prismatic front cover. 92 gas charging of vrf / vrv system with r410a refrigerant gas. before gas charging system shall be flushed with high purity nitrogen gas to remove carbon content, dirt particles to make sure that there is no chance of mixing any impurity with refrigerant gas. thereafter system shall be tested with nitrogen gas at 1.5 times of working pressure of r410 refrigerant gas to ensure leakproof system. whole system shall be vacuumed up to 500 micron level which ensures the zero moisture content level in piping to ensure better cooling efficiency and long life of the system. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr ....
32
Military Engineer Services - Rajasthan
37255521 welcome maintenance for offrs qtrs under age b / r ii under ge ( n ) bikaner. 1 m&l preparingof old decorated surfaces of walland applying one coat of distemper oil emuision complete all as specified and as directed by engr in charge. 2 m&l preparingof old decorated surfaces of walland applying two coat of distemper oil emuision complete all as specified and as directed by engr in charge. 3 m&l preparing surfaces of plaster or unplaster old surface of wall and applying one coat of white wash complete all as specified and as directed by engr in charge. 4 m&l preparing surfaces of plaster or unplaster old surface of wall and applying two coat of white wash complete all as specified and as directed by engr in charge. 5 m&l preparing surfaces of plaster or unplaster old surface of wall and applying one coat of white wash on ceiling complete all as specified and as directed by engr in charge. 6 m&l preparing surfaces of plaster or unplaster old surface of wall and applying two coat of white wash on ceiling complete all as specified and as directed by engr in charge. 7 m&l preparing old surfaces of wall and applying one coats of plastic emulsion paint complete all as specified and as directed by engr in charge. 8 m&l preparingold surfaces of ceiingand applying one coats of plastic emulsion paint complete all as specified and as directed by engr in charge. 9 m&l preparing old surface of wood of any desc over 10cm width or girth and applying two coats of synthetic enamel paint .over pink primer complete all as specified and as directed by engr in charge. 10 m&l preparing new surface of steel of any desc over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide complete all as specified and as directed by engr in charge. 11 m&l preparing the old painted wooden surfaces of any description over 10 cm width or girthand applying one coat of synthetic enamel paint.complete all as specified and as directed by engr in charge. 12 m&l preparing new surface of steel of any desc over 10cm width or girth and applying one coat of synthetic enamel paint over red oxide complete all as specified and as directed by engr in charge. 13 m&l complete removal of existing treatment and applying a thin layer of putty on wall surfaces complete all as specified and as directed by engr in charge. 14 m&l preparing new surface of old or new incl removal of old treatment ans applying a thin layerof plaster of paries to give a uniform finish as approved by engr in charge 15 m&l demolition of cement conc. in any description and incl any position not otherwise specially provided complete all as specified and directed 16 m&l dismanting floor, hearth or wall tiling including cement mortar bedding and removal of rubbish out of the premises complete all as specified and as directed by engr in charge. 17 hacking out old broken glass ( any thickness, size, quality or description ) fromwooden frame or stone concrete or brick surrounds glazed with putty or fixed with beads.complete all as specified and as directed by engr in charge. 18 dismantlingpipes of any desc fixed to wall or laid under floor complete all as specified and as directed by engr in charge. 19 dismantling cast iron pipes of any desc fixed to wall or laid under floor complete all as specified and as directed by engr in charge. 20 taking down cement plaster on brick or stone walls, including raking out joints, hacking for key, scrubbing down with water etc. 21 taking up or down steel tubing 15 mm diaand connections and stacking neatly for offering credit complete all as specified and as directed by engr in charge. 22 all as per item n 21 above, but 20 mm dia. complete all as specified and as directed by engr in charge. 23 taking down chowkhats or frameswith shutters ( without taking off shutters from the frames ) of size n. exc 1.5 sqm each complete all as specified and as directed by engineer in charge. 24 taking down chowkhats or frameswith shutters ( without taking off shutters from the frames ) of size exc 1.5 sqm but not exc 4.0 sqm each complete all as specified and as directed by engineer in charge. 25 taking down shutters of any description, areaexceeding 1.00 sqm and n.exc 2.00 sqm eachcomplete all as specified and as directed by engineer in charge. 26 m&l for welding in repairs n.exc 2.5 cm in length and not exceeding 6mm thick of metal complete all as specified and directed by engineer in charge. 27 s&f 1.25 mm thick pressed steel frames of size 125mm x 60mm for single doorsincluding necessary fixing lugs, hinges, lock strike plate, etc complete all as per is provns.complete all as specified and as directed by engr in charge. 28 s&f 1.25 mm thick pressed steel frames of size 105mm x 60mm for single doorsincluding necessary fixing lugs, hinges, lock strike plate, etc complete all as per is provns.complete all as specified and as directed by engr in charge. 29 s&f second classhard wood plain, framed, panelled shutters 35mm thick, ( any number of panels ) with panels of timber flat on both sides ( feather edged ) or of veneered partcile board medium density wood particle board with commercial faces venners supplied and fixed to chowkats.complete all as specified and as directed by engr in charge. 30 s&f second class hard wood, glazed and skelleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etcwithout sash bar, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, size of members as directedsupplied and fitted to chowkats complete all as specified and as directed by engr in charge. 31 m&l for 25 mm thick flush shutters for cupboards solid core construction, with block board core, and ply wood face panels, both faces covered with decorative face veneer with lipping to matchcomplete all as specified and as directed by engineer in charge. 32 s&f solid pvc door frame of size 50 mm x 47 mm made out of 5 mm plain colour pvc sheet reinforced with m.s. square tube suppling & fixing in opening all as specified and as directd. 33 s&f factory made solidpanel pvc door shutter 30mm thick ( style ) consisting of framemade out of ms tubes for top and bttom rails. ms frame shall be covered with heat moulded plain colour pvc c channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colourpvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, panneling of plain color pvc sheetto be fitted in the ms frame welded / sealed to the stiles &rails with suitable pvc sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site all as specfied and as directed. 34 s&f steel window / ventilators pressed steelframed ( box type ) factory made glaged and guaged with side hung shutters including pintolhinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded incl a prov of cooler / ac opening with shutter including one shop coat of red oxide primer complete all specified.note :i ) he window shall be fabricated as per drg no cebz / 888r & 889 sheet 1 to 4. ii ) ms fillets, glazing, wire gauge shall be measured and paid separately. 35 s&f framed work such as grills , framed guard bars barred iron doors ;ladders framed balusters railings and similar work conforming to fe 410 0or fe 310 0 complete all as specified and as directed by engr in charge. 36 s&f stainless steel wire cloth o.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples.complete all as specified and as directed by engr in charge. 37 s&f stainless steel wire cloth o.36mm nominal dia of wire and average width of aperature 1.40mm and fixed in repairwith stainless steel wire staples.complete all as specified and as directed by engr in charge. 38 m&l for second classhard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints.complete all as specified and as directed by engr in charge. 39 m&l second classhard wood, in scantling wrought, in timber fixed complete all as specified and as directed by engr in charge. 40 teakwood beading 20x60mm half round complete supplied and fixed complete all as specified and as directed by engr in charge. 41 s&f 18 / 19 mmplywood, grade 1 ( with bwr resistant / termite proof ) with fixed with screws to timber frame work as in cup boards / cabinets etc complete all as specified and as directed by engr in charge. ( make : century / kitply / or other app by ge ) 42 m&l for water proofing block boards 18 / 19 mm , grade 2 exterior quality grade , commercial type fixed with screws to timber frame work. complete all as specified and as directed by engr in charge. 43 m&l for 0.9 mm thick decorative choice of laminates type i of surface finishwhitestuck with importedadhesive on sides of board as directed by eng in charge . ( make corby, or euro ) 44 m&l prelaminated partical board 19 / 20mm medium density , prelaminated with one side with decorative choicelaqmination and other side balancingwith white laminationfixed with screws as in shelves to kitchen almirah and cub board fixed in repair.complete all as specified and as directed by engr in charge. 45 s&f 12mm thick plywwod grade bwr , type bb , fixed with screws to timber frame work.complete all as specified and as directed by engr in charge. 46 s&f 6mm thick plywwod grade bwr , type bb , fixed with screws to timber frame work.complete all as specified and as directed by engr in charge. 47 m&l for 0.9 mm thick decorative choice of laminationtype 1 of surface finish , colour and pattern as approved adhesive as per manufacturers instructions complete all as specified and as directed by engr in charge. 48 m&l for 1.50 mm thick pvc laminated decorative impressionchoice of laminationtype 1 of surface finish , colour and pattern as approved adhesive as per manufacturers instructions ( corby / duco ) . 49 s&f stain less steel catcherof superior quality complete all as specified and as directed by engr in charge. 50 s&f stain less steel pivoted type hingesof superior quality complete all as specified and as directed by engr in charge. 51 s&f 75mm long brass handle of desired finish with screws as approved by engg in charge. 52 s&f 35mm long mortice lockcomplete all as specified and as directed by engr in charge. ( make :godrej / harrison ) 53 s&f 75mm long brass tower bolt of desired finish with screws as approved by engg in charge. 54 s&f drawer side channel of std size and incl of rooler for moving drawer, mild steel bright finish, or electrogalavanised width of flap 30mm & length 60 mm all as specified. 55 s&f stainless steel fancy type, bright finish handles fixed with screw, of 125mm size all as specified. 56 s&f stainless steel multipurpose bracket in wooden / partitions for storing rations types made of 4mm dia stainless steel rods, fixed in side partition etccomplete.make: usha shriram enpt or equivalent ) . 57 s&f stainless steel luddel craddle hanging stand for cutlery all as specified and directed dy engr in charge.make: usha shriram enpt pvt ltd. 58 s&f stainless steelzero crank hinges fancy type ( with euro concealed hinges make: avis gold or equivalent ) fixed to shutter in cub board of std size and shape all asdirected dy engr in charge. 59 s&f 7s&f sinks made of stainless steel lmmthickkitchenorlaboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including fixing contilever brackets and connecting union to pipe complete all as specified and as directed by engr in charge. 60 m&l for recessed type stain less steelhandle for cup boards size 150 mm long complete all as specified and as directed by engr in charge. 61 m&l for roller ( pvc / stain less steel ) suiltable for sliding shutters . as app by eng in charge 62 pvc toilet cabinet with shelves and shutters fixed with looking mirror of size 600 x 450 mm complete all as specified and as directed by engr in charge. ( make : commander or equivalent ) 63 s&f continous ( piano ) hinges 30mm wide mild steel bright hinges 30 mm with flap, ms bright finished or electrogalvanised complete all as specified and as directed by engr in charge. 64 hasp and staple 100mm aluminium anodised, safety type, with mild steel hinges pin including bolt to hinge plate and fixed with screws complete all as specified and as directed by engr in charge. 65 s&f mild steel peg set stay 300 mm with and incl screws and bolts complete all as specified and as directed by engr in charge. 66 butt hings, 100 mm long, extructed aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type c 21.complete all as specified and as directed by engr in charge. 67 s&f butt hings, 100 mm long, extructedisi marked complete all as specified and directed by engr in chargefixed complete all as specified and as directed by engr in charge. 68 s&f extruded aluminium alloy handles, 100 mm long, fabricated type anodised complete all as specified and as directed by engr in charge. 69 s&f aluminium, anodised , 100 mm long, barrel tower bolts of extruded section and fixed complete all as specified and as directed by engr in charge. 70 s&f extruded aluminium alloy handles, 150 mm long, fabricated type anodised complete all as specified and as directed by engr in charge. 71 s&f aluminium, anodised , 150 mm long, barrel tower bolts of extruded section and fixed complete all as specified and as directed by engr in charge. 72 supply and fix floor door stopper of aluminium alloy body, overall length of cover plate 140 mm and tongue anodised with hard drawn steel sring fixed in floor complete all as specified and as directed by engr in charge. 73 s&f aluminium alloy, anodised, slidding door bolt300mm long, with hasp staple ( bolt type ) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed by engr in charge. 74 s&f mild steel, 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed in repair complete all as specified and as directed by engr in charge. 75 s&f figured glass, pin head type, 4mm thick and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed by engr in charge. 76 s&f 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not execeeding 0.5 sqm in each pane for metal frames complete all as specified. 77 s&f anodised aluminium with powder coating frame for doors, windows , ventilators with one or more rebates includirg joining cleat for fixing etc. complete all as specified and as directed. 78 s&f anodised aluminium frame for doors, windows , ventilators with one or more rebates includirg joining cleat for fixing etc. complete all as specified and as directed. 79 s&f sheet glass, ordinary quality 5.5 mm thick for aluminium door , window and vent.and glazing in square n exc 0.5 sq.m in each pane complete all as specified. 80 s&f neoprene / epdm rubber gasket for fixing sheet glass complete all as specified. 81 m & l pcc25 mm thick 1:2:4 type b0 ( 12.50 mm graded aggregate ) in any position in ground floor / roof complete all as specified and as directed by engr in charge. 82 m & l pcc75 mm thick 1:3:6 type b0 ( 12.50 mm graded aggregate ) in any position in ground floor / roof finishing cement concrete surface without using extra cement complete all as specified and as directed by engr in charge. 83 m & l pcc1:2:4 type b1 ( 20 mm graded aggregate ) as in hold fast blocks rungs etc icluding necessary form work complete all as per specified and directed ny engr in charge 84 m & l pcc 1:3:6 type c0 ( 12.50 mm graded aggregate ) as in filling in pressed steel frames complete all as specified and as directed by engr in charge. 85 m and l for coloured non skid ceramic tiles exceeding 0.11 sqm but not exceeding 0.18 sqm 7 to 8mm thick in floorsset and jointed in neat cement slurry and pointed incoloured cement to match the floorlaid over 15mm thick screed in cement mortar 1:6.complete all as specified and as directed by engr in charge. 86 m&l glazed ceremic tiles white450x300mmx7mm thickcoloured, set and jointed in neat cement slurry and pointed in white cement or coloured to match colour matching with floortiles as on vertical surfaces laid over 10mm thick cement screed in 1:4.complete all as specified and as directed by engr in charge. 87 m&l chequered cement concrete tiles 25 cm x 25 cmx25mm thick with grey cement and no pigment set jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed in cement and sand mortar 1:4 complete all as specified 88 m&l for vitrified tiles not exceeding 0.36 sqm 10 mm thick in floors set and jointed in neat cement slurry and pointed in neat cement s;urry in floors including 15 mm thick screed bed in cement and sand mortar 1:4 complete all as specified 89 m&l for vitrified tiles not exceeding 0.36 sqm 10 mm thick in floors set and jointed in neat cement slurry and pointed in neat cement s;urry in floors including 15 mm thick screed bed in cement and sand mortar 1:4 complete all as specified but in vertical surface. 90 m and l for 20mm thick granitemachine cutslab table rubbed and polished graniteas on cooking platforms incl. pointing in white cement 1:2using marble dustwith admixture of pigmentto match with marble shadelaid over 20mm thick cement screed in cement mortar 1:6.complete all as specified and as directed by engr in charge. 91 rendering 10 mm thick in cm 1:6 on other than fair faces of brick work or concrete surfacesfinished fair and even complete all as specified and as directed by engr in charge. 92 rendering 15 mm thick in cm 1:4 on fair faces of brick work or concrete surfacesfinished fair and even complete all as specified and as directed by engr in charge. 93 rendering 5mm thick on fair faces ofconc. surfaces in cement mortar 1:3, even and smooth w / o using extra cement as on ceiling.complete all as specified and as directed by engr in charge. 94 s&f tubes, medium grade galvanised, 15 mm borewith all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed by engr in charge. 95 s&f tubes, medium grade galvanised, 20 mm borewith all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed by engr in charge. 96 s&f aluminium sheeting 0.56 mm thick alloy 31000 h4 in ridges, hips, valley gutter drip and straight flashing ( length and girth as fixed ) complete all as specified and as directed by engr in charge. 97 s&f mild steel work as in hold fasts, clamps, bands, straps etc conforming to fe 410 0 complete all as specified and as directed by engr in charge. 98 s&f sinks with drainage board made of stainless steel 1mm thick kitchen or laboutery with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm 330 mm x 160mm complete all as specified and as directed by engr in charge. 99 s&f stainless steel plate rack, tubular type, with fixing arrangement900mm x 900 mm size all as directed and as approved by engr in charge. 100 s & f glass corner of size 300mmx300mm with5.5 mm thick glass andsteelness steel clip and steelness steel railing allround the shelfcomplete all as specified and directed by engineer in charge . 101 s&f 600x450mm bevelled edge mirror of selected quality glass mounted on 6mm th ac building board or commercial ply complete all as specified and as directed by engr in charge. 102 s&f 5mm thick looking mirror of selected quality with and including stainless steel spacers any size as approved by engrbevelled edge mirror of selected quality glass mounted on 6mm th ac building board or commercial ply complete all as specified and as directed by engr in charge. 103 s&f pvc ( swr ) pipes 75 mm bore, single socketed, in any length with rubber ring jointed fixed to walls complete all as specified and as directed by engr in charge. 104 s&f pvc ( swr ) pipes 110mm bore, single socketed, in any length with rubber ring jointed fixed to walls.complete all as specified and as directed by engr in charge. 105 s&f pvc ( swr ) branch piece, single ( single y ) equal or unequal, 75mmbore.complete all as specified and as directed by engr in charge. 106 s&f pvc ( swr ) vent cowl 75 mm complete all as specified and as directed by engr in charge. 107 s&f pvc ( swr ) floor trap 75 mm, plain with grating including jointing with solvent cement complete all as specified and as directed by engr in charge. 108 s&f pvc ( swr ) branch piece, single ( single y ) equal or unequal 110mmbore.complete all as specified and as directed by engr in charge. 109 s&f pvc ( swr ) bends any radius 75mm bore complete all as specified and as directed by engr in charge. 110 s&f pvc ( swr ) bends any radius 110mm bore complete all as specified and as directed by engr in charge. 111 s&f pvc ( swr ) gully trap 125 / 110 mm setting and jointing with solvent cement complete all as specified and as directed by engr in charge. 112 s&f in repair stack clamp out of 40mm x3mm flat iron stays with rubber gasket covering including bolt and nuts, spacer and securing ends of stays to walls or roof for 50mm bore piece complete all as specified and as directed by engr in charge. 113 s&f in repair stack clamp out of 40mm x3mm flat iron stays with rubber gasket covering including bolt and nuts, spacer and securing ends of stays to walls or roof for 100mm bore piece complete all as specified and as directed by engr in charge. 114 disconnecting existing tanks, setting aside ( or lowering if required ) for repairs cleaning etc andhoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirtetc from tanks and from mouths of circulating pipes etc complete ( capacity of tanksexc 250 ltr and n exc 500 ltrs ) complete all as specified and as directed by engr in charge. 115 s&f rotational moulded double layer ( isi marked of app make ) polythene water storage tank ( cylindrical vertical with closed top ) hoisted and fixed in position of 500 ltrs including dismantling existing.complete all as specified and as directed by engr in charge. 116 s&f ball valve high pressure of ptmt with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixedfixed in repair.of 20mm complete all as specified and as directed by engr in charge.make : prayag or equivalent. 117 s&f brass cp wall mixer non telephonic for mixing hot and cold water screwed down for iron pipe 15mm bore.complete all as specified and as directed by engr in charge. ( make : parryware or hindware or equivalent ) . 118 s&f brass cp whb mixer non telephonic for mixing hot and cold water screwed down for iron pipe 15mm bore complete all as specifie and as directed by engr in charge . ( make : parryware or hindware or equivalent ) . 119 s&f vitreous china wash down water closet pan with fixing bolts, trap ( pedestal pattern ) , white, ( excludingflushing cistern and flush pipe ) complete fixed in repairs complete all as specified and as directed by engr in charge. 120 supply and fix vitreous chinawash hand basin flat back size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand etc complete fixed in repairs complete all as specified and as directed by engr in charge. 121 s & f pvc valveless ( syphon internal fitting ) of pvc low levelaction type flushing cistern, 10 ltr capacity low level , whitewith inlet, ball valve, float and handle including brackets fixed in repairs complete all as specified and as directed by engr in charge. 122 s & f pvc valveless syphonic action type flushing cistern, 10 ltr capacity low level , whitewith inlet, ball valve, float and handle including brackets fixed in repairs.complete all as specified and as directed by engr in charge. 123 s&f pvc connections 15 mm size with ptmt nuts of length 450 mm complete all as specified and as directed by engr in charge. 124 s&f stainless steel tubular towel rail, 200 mm dia d type 60cm long between flanges complete all as specified and as directed by engr in charge. 125 s&f bib tap 15 mm dia, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwedfor iron pipeand fixed in repairs complete all as specified and as directed by engr in charge. ( make : parryware or hindware or equivalent ) 126 s&f bib tap 15 mm dia, long body fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwedfor iron pipeand fixed in repairs complete all as specified and as directed by engr in charge. ( make : parryware or hindware or equivalent ) 127 s&f stop valve, 15 mm dia, fancy type, chromium plated, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and as directed by engr in charge. 128 s&f stop valve, 15 mm dia, concealed stop valvefancy type, chromium plated, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and as directed by engr in charge. 129 s&f pillar taps, 15mm dia, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe and fixed in repairs.complete all as specified and as directed by engr in charge.make: jaquar or equivalent 130 s&f brass chromium plated shower rose 125 mm size including fixing to steel pipe or union fixed in repairs complete all as specified and as directed by engr in charge.make: jaquar or equivalent 131 sf brass chromium plated shower arm 15 mm 195 mm long with bend 45 degreemm size including fixing to steel pipe or union fixed in repairs complete all as specified and as directed by engr in charge.make: jaquar or equivalent 132 s&f sheet glass shelf assembly in repair , oconsisting of 5.5 mm thick sheet glass shelf 12 cm wide chromium plated bracket guard and railing 60 cm long complete all as specified. 133 s&f plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by engr in charge. 134 s&f cp health faucetfixed type suitable for ewcs with 1, 5 mtr stainless steel tube complete all as specified and directed by engineer in charge make : jaquar, prayag 135 s&f cp toilet paper holder fancy type complete all as specified and directed by engineer in charge.make: jaquar or equivalent 136 s&f angle valve cast copper alloy fancy type cp with long shank and cup and screwed for iron pipefixed in repair complete all as specified and as directed by engr in charge.make: jaquar or equivalent 137 s&f waste pipe 32mm for whb with coupling fixed in repairs complete all as specified and as directed by engr in charge. 138 m&l for along the wall below concrete or masonry using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed by engr in charge. 139 m&l for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 ( 1 cement: 2 coarse sand ) to match the existing floors complete all as specified and as directed by engr in charge. 140 s&f grating doom 125 mm dia with waste hole of ptmt ( minimum weight 40 gms ) complete all as specified and as directed by engr in charge. 141 s&f chromium plated soap dish complete all as specified and directed by engineer in charge. 142 s&f aluminium snake bead with bush duly fitted with screws with length equal to door width as specified and directed by engr in charge 143 m&l for repairingof rolling shutters making functional by providing greasing oiling , welding etc.including taking down rolling shutters or hood if required complete all as specified and as directed. 144 s&f safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed by engr in charge. 145 s&f ball bearing for rolling shutters.complete all as specified and as directed by engr in charge. 146 m&l for 25mm to 30mm thick plaster of paris ( pop ) ( gypsum anyhydrous ) raised moulding to flat surface of ceiling including preparation of surfaces all as directed.complete all as specified and as directed by engr in charge. 147 m&l for green sheet pvc of best quality to cover the surface where required complete all as specified and as directed. 148 s&f water closet pedestral pattern white or coloured ( as approved by engr in charge ) make :cera cat no.s1013113 ( cristy single piece suite p or s trap incl seat cover ) or equivalent in hindware , jaquar, parryware ) complete all as specified and as directed. 149 s&f in aluminium composite panel of any colour of having thickness of approx 3 4mm thick which are used in aluminium doors / partitions of all as specified and as directed. 150 s&f in pre laminated pvc boards of heat and fire resistant , non toxic , anti chemicaland corrosion resistant, termite proof and resistant to fungal attacks used in kitdhen cabinets of any finish complete all as specified and as directed. 151 m&l washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 ( 1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 kg of cement per square metre, top layer 15mm cement plaster 1:1 / 2:2 ( 1 cement: 1 / 2 coarse sand : 2 stone chipping 10mm nominal size ) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified ( paymentfor providing grooves shall be made separately ) . 152 s&f 10.00 mm thick gypsum boards as in ceiling as per approved desidg including recessing for provision of ceiling lights , moisture resistant , incl intermediate , perimeter channel ceiling channel , alon nuts and bolts connecting plates gypsum boards , dry wall screws soffits cleats , ceiling section, rowel plugs fixtures and screws complete all as spfd and as shown in sketch and applying twwo coats of emulsion paint over a coat primer on exposed surfaces.design of ceiling board as app by engr in charge. ( note: no extra payment shall be claimed from contractor for designs to ceiling falls etc ad shall be measured in plan only ) 153 m&l for 1.5mm thick self adhesive waterproofing membrane consisting of self adhesive sbs ( styrene butadiene styrene ) modified / bitumen compound covered on the top side with high density cross laminated polyethylene film and on the underside with an easy to peel silicon film all as per manufacturer’s instructions having minimum overlaps 50mm on sides and 100mm on ends, provided with & including suitable bitumen primer @ 0.30 litre per sqm as recommended by membrane manufacturer after cleaning the roof surface / sunken floor from all loose, dust, dirt, foreign material and particularly oil and grease marks, complete all as specified and as directed.make : m / s texsa india ltd / m / s pidilite industries ltd / m / s sika india pvt ltd / m / s stp limitednote : the net area of waterproofing treatment shall be measured and paid for without any extra allowance for side & end laps for membrane and this aspect shall be deemed included in the quoted rates. 154 taking down carefully ( aluminium ) point wiring complete of any type ( batten / surface conduit or concealed ) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper / white washing / colour washing to match with the existing surface complete all as spcified and directed. 155 taking down submain wiring aluminium / copper of any size including earth continuity condutor on teak wood or conduit and removing from site and making good the disturbed surface of wall etc complete all as specified and directed. 156 taking down old u / s existingdb tpn 4 way anddb spn 12 way including mcb / mccb of any capacity and any size and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed. 157 m & l for point wiring with and including single core frlsh pvc insulated and unsheathed stranded copper conductor cable of size 1.5 sqmm 1100 volts grade drawn through and including suitable size of pvc concealed conduit with accessorieswithlaminated top cover fixed on ms sunken box for housing of switch, socket, regulator etc complete with and including 1.5 sqmmfrlsh pvc insulated and unsheathed stranded copper conductor cable as earth wire and connected to common earth dolly and making good to the disturbed surfaces of wall, floor, ceiling etc to match with exisiting surface complete all as specified and as directed by engr in charge for the following : ( a ) one light / fan / ex fan / bell / point controlled by one switch. 158 ( b ) one pin 5 amps socket point on the same board with other switches complete 159 ( c ) one 3 pin 5 amps socket on independent board. 160 ( d ) all as per item no 4 above but but one light point controlled by two 02 way switchboard complete and all as directed by engr in charge. 161 ditto all as per item no 157 above but with 4.0 sqmm copper wire for 3 pin socket outlet 20 amp on independent board complete and all as directed by engr in charge. 162 s&f switch piano type, 5 amp, single pole one way, 230 volts, flush type complete all as specified and as directed by engr in charge. 163 s&f switch piano flush type single pole, one way 15 / 20 amps 230 voltscomplete all as specified & directed by engr in charge. 164 m&l socket outlet 3 pin5 amps flush type230 voltscomplete all as specified and directed by engr in charge. 165 m&l for socket outlet 2 in 1, 3 pin, 5 & 15 amps, 230 volts t complete all as specified & directed by engr in charge. 166 s&f ceiling rose, surface backelite , three terminal ac, 230 voltcomplete all as specified. 167 supply and fixing led mirror light fitting , type with high out put diffuser 2 feet, 5watt 220 v ac decorative type with driver holder and led lamp including connecting up with three core flexible copper conductor cable of suitable size complete.havells cat part no enduralinearneobs10wled865spcwh / wipro cat part no ll20 111 xxx 65ne3 / bclsb 10 wh 168 s&f led tube light fitting, 1x 20 22 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24 / 0.20 sqmm complete all as specified and directed by engr in charge. make :philips bn021 led 20s psu cw gr s2 / crompton greaves lddr20 cdl dazzle ray / bajaj bclab 20w 169 s&f single pole and neutralenclosure with a two pin and earth plug and socket complete with one single pole mcb 20 amp complete all as specified and as directed by engineer in charge. 170 supply and fixing fan regulator electronicsocket typefive step controlled 230v ac 50 hz forcomplete all as specified and directed by engr in charge. 171 s&f sheet metal enclosure mcb db, double door, tpn 4 way with 200 amps rated busbar all as specified and as directed. make: hegar / legrand / seimens 172 s & f double door, sheet metal enclosure, powder coated for mcb db spn 12 way fittedwith neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to is 13032 1991 complete all as specified and as directed by engr in charge. 173 s & f mcb sp, 5 32 amps , 240 volts, breaking capacity 10ka complete all as specified and as dircted by engr in charge. 174 s&f mcb 63amps, c curve tpn, 415 volts, complete all as specified and as directed by engr in charge. 175 supply and fixing bell push, flush type, 5 amp 230v ac 50 hz forcomplete all as specified and directed by engr in charge. 176 supply and fixing buzzer, ding dong ac. 230 volts, single pole complete all as specified and directed by engr in charge. 177 m & l lamp holder, pvc / polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by engr in charge. 178 taking dowen and refixing led light fitting mirror type with high out put diffuser 2 feet, 10 / 5 watt 220 v ac decorative type with driver holder and led lamp including connecting up with three core flexible copper conductor cable of suitable size complete. 179 taking dowen and refixingled tube light fitting, 1x 20 22 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24 / 0.20 sqmm complete all as specified and directed by engr in charge. 180 s&f mccb 100 amps, 4 pole, 415 volts, fixed type breaking capacity 16ka complete all as specified and as directed by engr in charge. 181 s&f mccb 40 amps, 4 pole, 415 volts, fixed type breaking capacity 16ka complete all as specified and as directed by engr in charge. 182 s&f in replacement decorative wall light fittings complete made up of polycarbonate, including withfor 9 w led lamp complete all as specified and directed by engr in charge. make / sample approved by engr in charge : surya / havells / phillips 183 s&f in replacement bad side light fitting with suitable led bulb complete all as specified and directed by engr in charge. sample approved by engr in charge and ge . 184 s & f led light fitting 1x9w / 1x10wbulkhead luminaires including led light driver holder connecting up with three core flexible copper conductor cable of suitable size. 185 s&f switch piano single pole 5 amps, two way, complete all as specified and as directed by engineer in charge 186 supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230v, 50 hz, rpm 1200, copper winding of sweep 300m 187 m & l for submain ( single phase ) wiring complete with and including 10 sqmm two single core, ( frlsh ) fire retardant, pvc insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, drawn through existing pvc conduitincluding accessories and fixed on walls and10sqmm, fire retardant, pvc insulated, multistranded copper conductor cable for earthing and connected to common earth dolly complete all as specified and as directed by engr in charge. note : ( i ) two runs of10.0 sqmm pvc insulated wire and one run of 10sqmm wire and one run of pvc conduit shall be measured as one unit length. 188 m & l for submain ( single phase ) wiring complete with and including 4.0 sqmm two single core, ( frlsh ) fire retardant, pvc insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, drawn through pvc conduit of suitable size including accessories and fixed on walls and 4 sqmm, fire retardant, pvc insulated, multistranded copper conductor cable for earthing and connected to common earth dolly complete all as specified and as directed by engr in charge. note : ( i ) two runs of 4.0 sqmm pvc insulated wire and one run of 4 sqmm wire and one run of pvc conduit shall be measured as one unit length. 189 s & f mcb spn, 5 32 amps, 240 volts, breaking capacity 16ka complete all as specified and as dircted by engr in charge. 190 m&l for submain wiringusing 4 runs of single core frls pvc insulated, unsheathed stranded copper conductor cable of size 4runs of 10 sqmm of voltage rating 1100v for three phase & neutral, drawn in and including concealed pvc conduit of dia not less than 25 mm dia with standard acessories, along with two run of frls pvc insulated, unsheathed, stranded copper conductor of size 2x6.0 sqmm as earth continuity conductor all as specified and directed ( note 4 runs of single core frls pvc cable 10sqmm for three phase & neutral with two run of earth conductor as earth and conduit shall be measured as one unit ) ...
33
Metal Scrap Trading Corporation Limited - Rajasthan
37223828 auction sale of lot no: 119/mstc/19fad/22 23 lot name: aluminium alloy scrap...
34
Metal Scrap Trading Corporation Limited - Rajasthan
37223827 auction sale of lot no: 118/mstc/19fad/22 23 lot name: aluminium alloy scrap...
35
Ajmer Development Authority - Rajasthan
37187531 tender for repair and maintenance of ac , cooler etc. 1 rewinding of ceiling fan motor ( starting and running winding ) including all necessary material. the motor is to be wound taking no. of coils, turns and pitch as it was originally wound with required size super enamelled wire with e class insulation material and making connections etc. as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. ( new model ceiling fan ) 2 900 / 1200 mm sweep ( new model ceiling fan ) 3 1400 mm sweep ( new model ceiling fan ) 4 all sizes ( old model ceiling fan ) 5 labour charges for removing and refixing of ceiling fan / exaust fanfrom site 6 charges for oiling, overhauling of ceiling fan, table fan, pedestal fan irrespect to the size of fan including removing, refixing of fan from site and testing etc. as required. 7 fans w / o removing & refixing 8 fans with removing & refixing at suitable location 9 p & f aluminium blades ( a set of 3 blades ) duly painted and well finished 900 / 1200 mm. the material of the fan blade shall be of designation 31500b with condition hx6 aluminium alloy sheet confirming to is 737 / 2008 10 p & f aluminium blades ( a set of 3 blades ) duly painted / powder coated. ( 1400 / 1500 mm ) the material of the fan blade shall be of designation 31500b with condition hx6 aluminium alloy sheet confirming to is 737 / 2008 11 p & f of rubber gromet ( fan insulator ) 12 providing and replacement of gun metal bush of ceiling / exhaust / cooler fan / as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 13 p & f 3 speed rotary switch for desert cooler complete with testing etc as required. 14 replacement of cooler pads ( heavy ) setof3 no. of size 25 x 27 15 p & replacement of m.s. shaft of fan motor for desert cooler / exhaust fan. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 16 p & replacement of supporting legs ( 4 no. ) of vertical pump of desert cooler as required for desert cooler / exhaust fan. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 17 p & f of stud with nuts and washer for desert cooler / exhaust fan.all the scrap material should be retained by the contractor. 18 servicing and overhauling of 20 sweep desert cooler including oiling, greasing, painting of tank from inside with rubber paint after properly desmantling each assembly and refixing the same as required. 19 paintingof desert cooler with two coats of rubber paint inside of water tank and two coat of synthetic enamelled paint on both side of cooler body, fan body, grills etc.after cleaning with sand paper, complete in all respect as required. 20 p & f isi marked commercial plywood 4.0 mm thickincluding cutting, hardwares etc. as required. 21 labour chargesfor fixing of desert cooler in windows including handling of cooler upto desired location, making electrical / water connections, testing etc. as required. 22 ground floor 23 first floor 24 p & fof isi marked vertical pump suitable for 20 desert coolerincluding making connection testing etc. as required. isi marked vertical pump 25 p & f of submerciblepump setsuitable for 18 / 24 desert coolers. 26 p & f of submerciblepump setsuitable for 36 desert coolers. 27 p & ffan motor suitable for 20 desert coolerincluding making connection testing etc. as required.with aluminiumwinding motor isi marked 28 rewinding of heavy duty exhaust fan motor including all necessary material, the motor is to be wound taking no. of coils, turns and pitch as it was originally wound with required size super enamelled wire with e class insulation material and making connections etc. as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 29 300 / 380 mm sweep 30 450 mm sweep 31 rewinding of motor of desert cooler pump with super enamelled copper wire, e class insulation material including removing, refixing, testing etc. as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 32 rewinding of motor of desert cooler fan with super enamelled copper wire, e class insulation material including removing, refixing, testing etc. as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 33 providing and replacement of heating element of blower type heat convector as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 34 providing and replacement of heating element rod of radiation type heat convector as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 35 supplying and charging of fresh refrigerant and testing of performance of air conditioner / fridge / water cooler of following capacity including capillary and strainer / filter. 36 1.0 tr window / split a.c. 37 1.5 tr window / split a.c. 38 2.0 tr window / split a.c. 39 25 / 50 / 40 / 80 ltr. water cooler 40 60 / 120 ltr. water cooler 41 replacement of defective compressor by company repaired compressor as per oem recommendationsof following gadgets including testing etc. as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 42 1.0 tr a.c. 43 1.5 tr a.c. 44 2.0 tr a.c. 45 25 / 50 / 40 / 80 ltr. water cooler 46 60 / 120 ltr. water cooler 47 p & replacement of condensing / cooling coil of copper fins for following capacity a.c. / water cooler / fridge as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 48 1.0 tr a.c. 49 1.5 tr a.c. 50 2.0 tr a.c. 51 25 / 50 / 40 / 80 ltr. water cooler 52 60 / 120 ltr. water cooler 53 servicing of 1.0 / 1.5 / 2.0 tr capacity split / window type air conditioner...
36
Rajasthan Medical Services Corporation Limited - Rajasthan
37044189 supply of trauma centre laryngoscope adult , x ray view box led x ray film view box with 1 film viewer , split air conditioner 1.5 ton 5 star , ups for desktop computer 1kva , multi functional printer laser type , radiology high frequency x ray machine 100ma mobile , bipap mask ventilator well cushioned face mask with ventilator , ambu bag adult and paediatric silicone resuscitators , thomas splint , intubation lma laryngeal mask airway reusable , gauze place bin , kidney tray 8 and 12 , bed pan , ss kick bucket , magles forceps , containers waste collection bins red 1 yellow 1 green 1 and black 1 4 each , cervical collar , forceps set and first aid surgical kit or dressing kit , desktop computer , pulse oxymeter , ot lighting led ot light single dome , mattress and cushion , automated external defibrillators , b type medical oxygen cylinder 40cuft and flow meter or holder , patient stretcher trolleys , a type nitrous oxide cylinder aluminium alloy , artery forceps eriles curved on flat box joint 12 inches , artery forceps eriles curved on flat box joint 15 inches , artery forceps eriles curved on flat box joint 6 inches , artery forceps eriles curved on flat box joint 8 inches , artery forceps eriles straight box joint 6 inches , bed side locker , bone cutting drilling and reaming system , cctv camera surveillance system surveillance camera set 16 cameras 1 dvr set and led tv , dressingdrum , fracture table , icu bed , medicine cabinet , mini laparotomy set , split air conditioner two ton , steriliser forceps cheatle pattern 10 inches , vacuum cleaner wet and dry...
37
Medical Health And Family Welfare - Rajasthan
37041237 bids are invited for trauma center 1 35 laryngoscope adult , x ray view box led x ray film view box with 1 film viewer , split air conditioner 1.5 ton 5 star , ups for desktop computer 1kva , multi functional printer laser type , radiology high frequency x ray machine 100ma mobile , bipap mask ventilator well cushioned face mask with ventilator , ambu bag adult and paediatric silicone resuscitators , thomas splint , intubation lma laryngeal mask airway reusable , gauze place bin , kidney tray 8 and 12 , bed pan , ss kick bucket , magles forceps , containers waste collection bins red 1 yellow 1 green 1 and black 1 4 each , cervical collar , forceps set and first aid surgical kit or dressing kit , desktop computer , pulse oxymeter , ot lighting led ot light single dome , mattress and cushion , automated external defibrillators , b type medical oxygen cylinder 40cuft and flow meter or holder , patient stretcher trolleys , a type nitrous oxide cylinder aluminium alloy , artery forceps eriles curved on flat box joint 12 inches , artery forceps eriles curved on flat box joint 15 inches , artery forceps eriles curved on flat box joint 6 inches , artery forceps eriles curved on flat box joint 8 inches , artery forceps eriles straight box joint 6 inches , bed side locker , bone cutting drilling and reaming system , cctv camera surveillance system surveillance camera set 16 cameras 1 dvr set and led tv , dressingdrum , fracture table , icu bed , medicine cabinet , mini laparotomy set , split air conditioner two ton , steriliser forceps cheatle pattern 10 inches , vacuum cleaner wet and dry total quantity : 4624...
38
Department Of Local Bodies - Rajasthan
36994828 rate contract for repair and maintenance of electrical accessories and wiring in nagar nigam buildings. 1 wiring of light point / fan point / exhaust fan point / call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade ( is:694 ) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade ( is:694 ) in recessed isi marked mms ( is:9537 p iii ) vergin material pvc conduit & its all accessories ( j.b. , bends etc. ) , round tiles, 18 swg g.i. box with earth terminal, 6 a switch , 3 pin ceiling rose / lamp holder / 3 point connector, 3.0 mm thick isi marked phenolic laminated sheet ( is : 2036 1995 ) , al. alloy / cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheets & electrical / wiring accessories refer chapter e 04, e 05 & e 07 . for additional technical parameters of products / work , refer annexure a attached with this bsr . short point ( up to 3 mtr. ) 2 medium point ( up to 6 mtr. ) 3 long point ( up to 10 mtr. ) 4 wiring of 3 / 5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade ( is:694 ) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade ( is:694 ) in recessed isi marked mms ( is:9537 p iii ) vergin material pvc conduit & its all accessories ( j.b. , bends etc. ) , round tiles, 18 swg g.i. box with earth terminal of required size, 6 a switch, 3 / 5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet ( is : 2036 1995 ) , al. alloy / cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheets & electrical / wiring accessories refer chapter e 04, e 05 & e 07. for additional technical parameters of products / work , refer annexure a attached with this bsr . on board 5 short point ( up to 3 mtr. ) 6 medium point ( up to 6 mtr. ) 7 long point ( up to 10 mtr. ) 8 s&f following sizes ( dia. ) of isi marked mms ( is:9537 p iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories ( is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr .mms ( is:9537 p iii ) pvc conduit 25mm 9 mms ( is:9537 p iii ) pvc conduit 32mm 10 supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked ( is:694 ) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm ) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a or c , flame retardant as per is 10810 53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc / ms conduit / casing capping including all as per pre approved by engineer in charge, making connections, etc. as required. oem must have its own in house nablab setup for all testing facilities for wires. for additional technical parameters of products / work , refer annexure a attached with this bsr .1 x 1.5 sq.mm 11 2 x 1.5 sq.mm 12 1 x 2.5 sq.mm 13 2 x 2.5 sq.mm 14 2 x 4.0 sq.mm 15 supply & drawing wiring for sub mains as per pwd specification for electrical works with isi marked ( is:694 ) , 1100 volts grade pvc insulated flat twin core sheathed solid aluminium conductor with 10 swg g.i. support wire duly clipped including all as per pre approved by engineer in charge, making connections, as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products / work , refer annexure a attached with this bsr . 4.0 sq.mm 16 6.0 sq.mm 17 10.0 sq.mm 18 supplying and laying isi marked p.v.c. insulated submersible cable as per pwd specification for electrical works confirming to is:694 and as per is 8130 : 2013 of 1.1 kv grade .wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm ) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a or c , flame retardant as per is 10810 53, better amperage rating as per vde 0298 part 4 including making connection etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. all as per pre approved by engineer in charge, making connections. for additional technical parameters of products / work , refer annexure a attached with this bsr . 2.5 sq.mm 3 core flat / round. 19 providing & fixing of 240 / 415 v ac mcb with positive isolation of breaking capacity not less than 10 ka ( b / c tripping characteristic as per type of load and site requirement ) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828 ( 1996 ) / conforming to iec 60898 1 2002, iec 60947 2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board / sheets, min. operation 20, 000 upto 32 a rating and 10, 000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . single pole mcb 6 a to 32 a rating 20 double pole mcb6 a to 32 a rating 21 four pole mcb40 a rating 22 four pole mcb50 63 a rating 23 providing & fixing of ik09 recessed / surface mounting heavy duty horizontal type sheet steel not less then 1.2 mm thick distribution board as per pwd specification for electrical works isi marked conforming to is 13032 & is 8623 / conforming to iec 61439 3. phosphatised / powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link , connecting wire of suitable rating and din bar, masking sheet, including making internal db terminations with copper lugs and with detachable gland plate, including making connections, testing etc. as required.oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . ip 43 double door ( single phase ) . 8 way ( 8 o / g +2 i / c ) 24 ip 43 double door ( three phase ) 8 way ( 24 o / g + 8 i / c ) 25 providing & fixing of isi marked ( is :3854 ) 6 amp. flush type non modular switch as per pwd specification for electrical works, made out from industrial grade polycarbonate or fire resistant abs material, minimum width of switch toggle ( push part ) should not less then 16 mm, brass terminal & captive screws including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 26 providing & fixing of isi marked ( is :3854 ) 16 amp. flush type non modular switch as per pwd specification for electrical works, made out from industrial grade polycarbonate or fire resistant abs material , minimum width of switch toggle ( push part ) should not less then 16 mm, brass terminal & captive screws including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 27 providing & fixing of of 3 pin 6 amp. flush type non modular socket as per pwd specification for electrical works, made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 28 providing & fixing of 3 / 6 pin 16 amp flush type non modular socket as per pwd specification for electrical works, made out fromindustrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 29 providing & fixing of isi marked ( is :3854 ) 6 amp. combined flush type non modular socket and switch set as per pwd specification for electrical works, made out from industrial grade polycarbonate or fire resistant abs material, minimum width of switch toggle ( push part ) should not less then 18 mm, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 30 providing & fixing of isi marked ( is :3854 ) 16 amp. combined flush type non modular socket and switch set with indicator and fuse set as per pwd specification for electrical works, made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 31 providing and fixing of non modular power plug point accessories as per pwd specification for electrical works with 18 swg g i box of size 175 x 100 x 60 mm with earthing terminal / connector on recessed / surface with suitable size phenolic laminated sheet ( is : 2036 1995 ) cover including cost of 16 amp. switch ( is :3854 ) and 3 / 6 pin 16 amp. socket outlet [ as per detailed in respective item in bsr ] , making connection , testing , etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 32 providing & fixing of isi marked ( is:1293 ) 6 amp unbreakable 3 pin plug top with lamp indicator as per pwd specification for electrical works, made out from industrial grade polycarbonate or fire resistant abs material, brass terminal including making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 33 providing & fixing of isi marked ( is:1293 ) 16 amp unbreakable 3 pin plug top with lamp indicator as per pwd specification for electrical works, made out from industrial grade polycarbonate or fire resistant abs material, brass terminal including making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 34 providing & fixing of non modular socket size flush type 120 watt rotary minimum 5 step fan regulator as per pwd specification for electrical works, isi marked ( is:11037 ) made out from industrial grade polycarbonate or fire resistant abs material including making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 35 providing & fixing of isi marked ( is:2268 1994 ) single / multi tone electronic call bell as per pwd specification for electrical works, including making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 36 supply, fixing and testing of following capacity wall mounted stablisers having output voltage variation from 200v to 250v ( + / 5% ) with input voltage variation from 170v to 260v, time delay facility from 2 to 4 minute and high cutoff at 270v complete in all respect e074601 3 kva 37 providing & fixing of ip51 direct or ct operated, 1x240 / 3x240 volts, 50 hz static watt hour meter ( kwh ) as per pwd specification for electrical works, isi marked ( is :13010 2002 ) having resolution 0.1 / 0.01 kwh , accuracy class 1 as per is:13779, led indicators for tamper operation ( reverse & / or earth connection ) , pulsating led indicator for meterology , lcd display, cover plate for body and terminal sealing , push button for all standard parameters, including making connection , testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 10 a to 60 ampere single phase meter. 38 providing & fixing of iso certified company made tp&n 415 v side handle operated double break fuse switch unit in sheet steel enclosure as per pwd specification for electrical works conforming to is / lec 60947 3 : 1999 ( w / o hbc fuses ) including making connections with suitable lugs, testing etc. as required. appropriate type test certificate / oem test report shall be submitted . all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 100 a rating 39 providing & fixing of iso certified company made 240 / 415 v porcelain kitkat fuse ( / hbc type ) as per pwd specification for electrical works conforming to is:2086, 1983 on existing board / sheet including making connections with lugs, testing etc. as required . appropriate type test certificate / oem test report shall be submitted . all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 63 a , 415 v. 40 100 a , 415 v 41 providing & fixing of iso certified company made bus bar chamber housed in sheet metal box as per pwd specification for electrical works confirming to iec 60439 / is 8623 & iec 60529 / is 2147 made out from 1.6 mm thick powder coated crca sheet, degree of protection ip 31 front openable bus bar made out of aluminium or wrought aluminium alloy suitable for 200 amp. capacity , bus bar fixed on porcelain / dmc insulators at approved spacing including making connections etc. as required. appropriate type test certificate / oem test report shall be submitted . all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 300 mm long , 4 strip. 42 providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed unarmoured / armoured aluminium cable of 1.1 kv grade as per pwd specification for electrical works in existing rcc / hume / stoneware / pvc pipe / open duct / cable trench with filling of excavated earth in trench , on existing cable trays or on surface etc. including making necessary connection, testing etc. as required of size and as per points ( a ) , ( b ) , ( c ) , mentioned below: ( a ) material : h4 grade aluminium conductor of purity >99.6 % & as per is:1554 p i / is :7098 p – i ( b ) conductor shall have electrolytic aluminium confirming to is 8130, is 3975 1999 for armouring of cables in armoured cable items , is 5831 for sheath, is 10810 ( part 0 to 64 ) for testing procedures. ( c ) oem must have iso 9001 & 14001 certifications for quality assuarance & its own in house nabl lab setup for all testing facilities for cables . appropriate type testcertificate / oem test report shall be submitted . all above as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr. e110110 un armoured 16.0 sq. mm 4 core. 43 un armoured25.0 sq. mm 4 core 44 providing & laying of double wall corrugated pipe confirming to is : 14930 p 1 & 2 with hdpe coupler at 1 mtr. depth below the ground for laying cable including making the trench and back filling , compaction of earth as required ( excavation of earth to be paid extra as required. ) of following outer dia. / inner dia as per is:4984:1995. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr .55 / 50 mm. 45 sitc of chemical gel earthing system of dual pipe technology made of with b class g i pipe as per is 1239 ( part 1 ) :2004 of medium duty of following sizes as per points mentioned ( a ) , ( b ) , [ c ) , ( d ) , ( e ) below : ( a ) filled with anti corrosive conductive compounds with the permanent sealings at both the ends, cpri / erda tested with rms capacity of minimum 35 40 ka for withstanding 1 second . ( b ) to ensure the moisture content and electrical conductivity, 25 kg for 2000 mm & 50 kgs for 3000mm of resistance lowering earth enhancement material shall be used as a backfill compound. the compound shall be tested form nabl acredeated lab for low resistivity ( less than 0.12 ohm meter ) & high conductivity in nature with carbon as a major content as per referance of is 3043 1987, ieee 80 2013 ( clause 14.5d ) , ieee 837 & ier 1956 with latest amendemnts ( c ) heavy duty weather proof poly propylene earth pit chamber with lockable jam free lid suitable for safe working load 5000 kg or more of size top dia. 225 to 260 mm, bottom dia 300 to 350 mm. and height 250 to 300 mm. ( d ) testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. ( e ) self certificate for confirming above standards from oem is mandatory. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . e140510 with pipe in pipe technology ( outer pipe dia. / inner pipe dia. ) minimum 100 mm dia borewell gi pipe 2000 mm long, 50 / 25mm, terminal 40mm x 6 mm gi strip. 46 supply & laying following size earth strip in horizontal or vertical run in ground / surface / recess including riveting, soldering, saddles, jointing shall be done by overlapping and with 2 set of brass ( for custrip ) / gi ( for gi strip ) nut bolt & spring washer spaced at 50cm making connection etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 25mm x 3mm g.i. ( hot dipped ) strip 47 supply & laying following size earth wire in horizontal or verticalrun in ground / surface / recess including riveting, soldering, saddles, making connection with gi / cu thimble etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 8 swg copper wire. 48 providing & fixing of iso certified company made bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan as per pwd specification for electrical works, conform to all the performance requirements laid down in is:374 2019 including all amendments, as applicable ; & carry bis licensing ( i.e. isi marking ) or quality certification such as iso 9001 or above. with down rod up to 30 cm with secondary support. 1200 mm sweep bee 2 star rated ( service value >=4.5 to < 5 ) . 49 providing & fixing of of double ball bearing, copper wounded capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible 3 core copper conductor , making connections, testing etc. as required. oem shall be an iso certified company. appropriate oem test certificate shall be submitted by contractor. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 225 mm sweep 50 providing & fixing of heavy duty capacitor start, copper wound double ball bearing 900 / 1400 rpm single phase exhaust fan as per pwd specification for electrical works, conforming to is:2312 isi marked in existing opening including making connections testing etc. as required. oem shall be an iso certified company. appropriate oem test certificate shall be submitted by contractor. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 300 mm sweep ( 900 / 1400 rpm ) . 51 providing & fixing of capacitor start, copper wound, metal body, metal blade three speed wall mounting fan of following sweep with the help of anchor bolts including making connection testing etc. as required. oem shall be an iso certified company. appropriate oem test certificate shall be submitted by contractor. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . 400 mm sweep ( oscillating type ) . 52 providing & fixing of fluorscent tube rod in existing fixtures as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr . flourscent powder coated. 36 / 40 watts. 53 providing & fixing of energy efficient / energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm / watt output , pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k / 6000°k / 6500°k ( as per ansi bin ) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c. ) . manufactures word mark / name engraved / embossing / screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. ( lm79 / lm80 ) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . foe additional technical parameters of product / work, refer annexure a attacheded with this bsr. 9 watt 54 15 watt 55 rewinding of ceiling fan motor ( starting and running winding ) including all necessary material. the motor is to be wound taking no. of coils, turns and pitch as it was originally wound with required size super enamelled wire with e class insulation material and making connections etc. as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. ( new model ceiling fan ) . 900 / 1200 mm sweep ( new model ceiling fan ) 56 labour charges for removing and refixing of ceiling fan / exaust fan from site 57 charges for oiling, overhauling of ceiling fan, table fan, pedestal fan irrespect to the size of fan including removing, refixing of fan from site and testing etc. as required. fans with removing & refixing at suitable location. 58 providing and replacement of ball bearing of ceiling / exhaust fan and refixing the same at suitable location as requiredand as per oem recommendations. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 59 p & replacement of cover / bearing seat of ceiling / exhaust fan. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 60 p & f aluminium blades ( a set of 3 blades ) duly painted and well finished 900 / 1200 mm. the material of the fan blade shall be of designation 31500b with condition hx6 aluminium alloy sheet confirming to is 737 / 2008. 61 servicing and overhauling of 20 sweep desert cooler including oiling, greasing, painting of tank from inside with rubber paint after properly desmantling each assembly and refixing the same as required. 62 painting of desert cooler with two coats of rubber paint inside of water tank and two coat of synthetic enamelled paint on both side of cooler body, fan body, grills etc.after cleaning with sand paper, complete in all respect as required. 63 replacement of cooler pads ( heavy ) set of 3 no. of size 25 x 27 64 p & f aluminiun blade for 20 desert cooler fan as required. 65 p & f of isi marked vertical pump suitable for 20 desert cooler including making connection testing etc. as required. isi marked vertical pump. 66 p & f fan motor suitable for 20 desert cooler including making connection testing etc. as required. with copper winding motor isi marked. 67 rewinding of heavy duty exhaust fan motor including all necessary material, the motor is to be wound taking no. of coils, turns and pitch as it was originally wound with required size supernamelled wire with e class insulation material and making connections etc. as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 300 / 380 mm sweep. 68 rewinding of motor of desert cooler pump with super enamelled copper wire, e class insulation material including removing, refixing, testing etc. as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 69 rewinding of motor of desert cooler fan with super enamelled copper wire, e class insulation material including removing, refixing, testing etc. as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by thecontractor. 70 supplying and charging of fresh refrigerant and testing of performance of air conditioner / fridge / water cooler of following capacity including capillary and strainer / filter. 1.5 tr window / split a.c. 71 2.0 tr window / split a.c. 72 25 / 50 / 40 / 80 ltr. water cooler 73 replacement of defective compressor by company repaired compressor as per oem recommendations of following gadgets including testing etc. as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 1.5 tr a.c. 74 2.0 tr a.c. 75 25 / 50 / 40 / 80 ltr. water cooler 76 p & replacement of condensing / cooling coil of copper fins for following capacity a.c. / water cooler / fridge as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 1.5 tr a.c. 77 2.0 tr a.c. 78 25 / 50 / 40 / 80 ltr. water cooler 79 servicing of 1.0 / 1.5 / 2.0 tr capacity split / window type air conditioner. 80 p & replacement of overload protection of a.c. / water cooler as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 81 p & replacement of thermostat of a.c. / water cooler / fridge as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 82 p & replacement of selector switch of 1.0 / 1.5 / 2.0 tr a.c fan as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 83 p & replacement of starting relay of a.c / water cooler / fridge compressor as required. replacement of material or components shall be use as per guidelines of oem of original product. all the scrap material should be retained by the contractor. 84 s & f of capacitor of 230v / 275v, 50hz rating of plastic casing and terminals lugs or copper wire. starting capacitor.40 60 micro farad. 85 60 80 micro farad. 86 running capacitor 2.5 / 3.15 micro farad. 87 4.0 micro farad 88 6.0 micro farad 89 8.0 micro farad 90 10.0 micro farad 91 providing & fixing of ip20 led surface / recessed / suspended mounting mid power smd type led light fixture made from crca sheet steel housing, high purity / transmisivity uv stabilized non yellowish diffuser for uniform light distribution. high efficiency with 2.5 kv internal / external surge protection bis certified isolated driver having efficiency > 85% , with short & open circuit protection and in compliance to iec standards ( integral with light fixture ) . system lumen efficacy min. 100 lm / watt , thd < 10 % , p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k / 6000°k / 6500°k ( as per ansi bin ) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c. ) . manufactures word mark / name engraved / embossing / screen printing on housing. oem must have its own in house nabl acredeated lab setup for all testing facilities for led fixtures. ( lm79 / lm80 ) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product / work, refer annexure a attacheded with this bsr. recessed mounting 48w led light fixture 2x2 with acrylic / prismatic front cover. 92 gas charging of vrf / vrv system with r410a refrigerant gas. before gas charging system shall be flushed with high purity nitrogen gas to remove carbon content, dirt particles to make sure that there is no chance of mixing any impurity with refrigerant gas. thereafter system shall be tested with nitrogen gas at 1.5 times of working pressure of r410 refrigerant gas to ensure leakproof system. whole system shall be vacuumed up to 500 micron level which ensures the zero moisture content level in piping to ensure better cooling efficiency and long life of the system. all as per pre approved by engineer in charge. for additional technical parameters of products / work , refer annexure a attached with this bsr ....
39
Pradhan Mantri Gram Sadak Yojana - Rajasthan
36595163 tender for construction & maintenance pkg. no. rj06p316 t 13 bachhamadi to nh 21 via nagla bartai march, 2023 2 construction of reference bench mark ( 1 no. ) , working bench mark ( 4 nos. ) and near all drainage structures and bridges ( as per direction of engineer in charge ) , reference pillar / burgees @ 50m interval on both side of formation width including marking of centre line, setting out curves, recording of levels, white washing and lettering etc. complete as per mord specifications cl. 108. 3 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per mord specification clause 201.by mechanical means in area of non thorny jungle 4 scarifying old bituminous road by making 50x50mm furrows criss cross at 1.0 metre intervals at 45 degree to the center line of the carriageway 5 excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per mord specification clause 302.3 6 construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 50 m as per mord specification clause 301.5 7 construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per mord specification clause 303.1. 8 construction of granular sub base by providing well graded material, mixing in a mechanical mix plant at omc , carriage of mixed material to work site upto lead of 1000m spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with smoothwheelroller to achieve thedesired density, complete as per mord specification clause 401. for grading i material 9 providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing thematerial with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and mord specification clause 406. extra rate for carriage of mixed material additional lead of 20 km from in item 4.9 10 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per mord specification clause 502. low porosity 11 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per mord specification clause 503. 12 providing and laying bituminous macadam with hot mix plant using crushed aggregates ofgrading as per table 500.4 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolledto achieve the desired compaction as per mord specification clause 504.bitumen ( vg 30 ) 13 providing, laying and rolling of open graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing of aggregate and plastic waste cutting in a hotmix plant, laying and rolling with a three wheel 80 100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per mord specification clause 508. waste plastic @ 8% of bitumen. case ii by mechnical meansbitumen vg 30 14 providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per mord specification clause 510 by mechanical means case ii:type b bitumen ( vg 30 ) 15 supply & planting of shady plants ( neem, peepal, goolar, jamun, imli or other specified ) along road side including the following activities: 1. preparation of soil including cleaning & removing of unwanted shrubs removal of stones & garbage. 2. supply of plant at site of two years of age & height more than 1.50 mtr 3. supply of dry manure ( farm yard manure organic ) 4. supply of insecticides 5. digging of pits size 60x60x60 cms. including removal of stones. manuring application of insecticides & watering at least 15 liter per plant after planting. 6. half brick circular tree guard in second class bricks, internal dia 1.25 meter and height 1.20 meter above ground and 0.20 meter below ground, bottom two courses laid dry and top three courses in cement mortar 1:6 ( 1cement : 6 sand ) and the intermediate courses being in dry honey comb masonry, as per design complete. 16 construction of foundation / inaugration pedastal in 23 cm thick brick masonry in cm 1:4 of size 1.20m x 1.80m above ground level with adequate foundation including providing and fixing of granite stone of size 0.75m x0.60m with engraving letters and figures, cement plaster, white washing etc. complete as per direction of engineer in charge. 17 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and mord specification clause 801 18 900 mm equilateral & triangle 19 600 mm circular 20 800 mm x 600 mm rectangular 21 providing and fixing of typical pmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges.the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m 15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube.all m.s. will be stove enameled on both sides.lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.all sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1 22 providing and fixing of pmgsy logo with definition plate ( as per mord design / drawing ) 2mm thick ms plate framed to angle iron 40x40x6mmincluding orange luminous colour paint on logo, size of diamand plate 600x600mm definition plate 900x250mm supported on ms post of angle iron of size 65x65x6mm, 3m long stove enameled paint with hold fastfirmly fixed to the ground by means of properly designed foundation with m 15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and mord specification clause 1700 23 providing and erecting direction and place identification retro reflectorised sign asper irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3, fixed over aluminium sheeting, 2 mm thickwith areaexceeding 0.9 sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 nos.firmly fixed to the ground by means of properly designed foundation with m 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and mord specification clause 1701 24 providing and erecting typical citizens information board as per approved drawing & specification of mord made of two ms sheet of 1.6 mm thick each of size 900mm x 750mm stiffend by angle iron 25mmx25mm x 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 swg sheet ( vertical post 3050 mm with angle holdfasts and horizontal member 900mm ) to be joined by embedded in cement concrete m 15 grade of block of 600mmx 600mm x 750 mm size below ground level as per enclosed drawings & as directed by engineering incharge. all ms will be stove anmeled on both side lettering. figuring and border will be with ready mixed synthethic enamel paint of superior quality in required shade and colour etc complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification. 25 reinforced cement concrete m15grade kilometre stone / local stone of standard design as per irc:8 fixing in position including painting and printing, etc as per drawing and mord specification clause 1703 26 ( a ) 5th kilometre stone ( precast ) 27 ( b ) ordinary kilometer stone ( precast ) 28 ( c ) 200 m stone ( precast ) 29 cut stone boundary pillars / local stone of standard design as per irc:25, fixed in position including finishing and lettering but excluding painting as per drawing and technical specification clause 1704 30 providing and laying rounded hump type speed breakers for crossing speed 25 km / h as per irc design including providing and applying bitumen emulsion tack coat, making speed breaker in designed profile with bituminous macadam, providing seal coat type b for sealing the voids and marking chequered pattern with thermoplastic paint complete as perirc : 99 1988 31 marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make without glass beads laid on the road surface at temperature 160 c with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. 32 providing and erecting typical maintenance information board as per approved drawing & specification of mord made of ms sheet of 1.6 mm thick of size 900mm x 1500mm stiffend by angle iron 25mmx25mm x 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 swg sheet ( vertical post 3050 mm with angle holdfasts and horizontal member 900mm ) to be joined by embedded in cement concrete m 15 grade of block of 600mmx 600mm x 750 mm size below ground level as per enclosed drawings & as directed by engineering incharge. all ms will be stove anmeled on both side lettering. figuring and border will be with ready mixed synthethic enamel paint of superior quality in required shade and colour etc complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification. 33 providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per bs:873 ( part 4 ) 1973. 34 supply & fixing of mandatory / regulatory reflective sign board fixed on 3 meter long angle iron of size 65x65x6 mm complete as per irc 67 1977 made of 2 mm thick m.s. sheet stove enamelled paint and reflective symbol. 35 stop signs with definition plate size 30x20 cm 90 cm octagon 36 60 cm octagon 37 supply of caution diversion sign board size 1800 x 600 mm having centre height of 75 cm made out or 1.25 mm thick m.s. sheet duly framed with angle iron size 40 x 40 x 5 mm fixed on two moving wheels and stands, made out of 75 x 40 mm channel having two solid rubber wheels mounted on ball bearings, boards is processed in stoving enamel blue and machine cut sheet reflective letter and arrow on one side and the other side having arrow only complete in all respect. 38 supplying & fixing route marker reflective sign boards consisting of shield marked on m.s. flat 14 gauge of size 40 x 60 cm and definition plate of 30 x 25 cm, 14 gauge, fixed on mild steel posts of t iron or angle iron for nh / sh : 39 supplying of men at work sign board ( folding type ) made of 1.25 mm thick m.s. sheet size 900x900x900 mm painted in white stove enamelled paint and reflective machine cut sheet men’s emblem and letter men at work in red colours and additional attachment of size 150x900 mm plate for gang number and name with white stoving enameled back ground both plates are fixed on a folding stand of m.s. ( heavy ) steel tube of size 13.2 mm outer dia as per is 1239 ( part i ) 1979 duly painted in grey colour and both the plates are painted on back side in grey enamel paint. 40 p & f delinator with 30 cm. outer dia rcc hume pipe np 2 ( as per is 458 / 1971 ) pipe 1. om. long 40 cm embedded in cement concrete ( 1:4:8 ) block of size 50x50x40 cm. including excavation upto 40 cm depth. the inside of pipe shall be filled with c.c. ( 1:4:8 ) stone grit max size 20 mm or less upto the top with semi circular humping. the pipes shall be painted white / black with enamel paint with red dots two nos. on each side 41 supplying of cat’s eye made of aluminium alloy size 75x100x22 mm having 21 biconvex lenses embedded in circular disk of abs plastic on each side. 42 providing and erecting a thrie metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above road / ground level, fixed on ismc series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 2 m high with 1.15 m below ground level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to is:1367 and is:1364, metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 mm, 546 mm long complete as per clause 810 43 supply of chevron sign of size 75x60 cm made out of aluminum sheet 2 mm thick with fixing provision on m.s. angle iron post 50x50x6 mm 3 m long screwed with stainless steel nut bolts of 8 m dia, plate is covered by high intensity grade yellow retro reflective sheeting and black screen printed arrow on retro reflective sheet, complete in all respect. comp. in all respect duly post painted in alternate band of black / white synthetic enamel paint & hold fast at bottom 44 earthwork in excavation for structures as per drawing and mord specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial.ordinary soil upto 3 m depth 45 providing concrete for plain / reinforced concrete in open foundations complete as per drawings and mord specifications clause 802, 803, 1202 & 1203 p.c.c grade m 10 nominal mix 1:3:6 46 stone masonry in cement mortar for substructure complete as per drawing & mord specification clauses 702, 704, 1202 and 1204 random rubble masonry in 1:6 cement mortar 47 providing pcc m 20 architectural coping on the top of wing wall, return wall etc. complete as per drawing and mord specification clauses 615, 710and 1204.3.11 75 mm thick 48 pointing with cement mortar ( 1:3 ) on stone work as per drawing and mord specification clauses 613.3 and 1204 flush and rulled type 49 construction of dry lean cement concrete sub base over a prepared sub grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600 1, cement content not to be less than 150 kg / cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8 10 tonnes vibratory roller, finishing and curing. 50 construction of plastic cell filled cement concrete pavement, with m30 grade concrete, thickness as per design, over a prepared sub base, with 53 grade ordinary portland cement ( opc ) or any other type as per clause 1501.2.4 m30 ( grade ) .coarse and fine aggregates conforming to is : 2386, maximum in a concrete mixer of not less then 0.2 cum capacity and appropriate weigh batcher using approved mix design ( as per irc 44 2088, laid in approved fixed side formwork ( steel channel, wedges, steel plates including levelling the formwork as per drawing ) , spreading the concrete with shovels, rakes, compacted using screed and plate vibrators and finished in continuous operation, concrete should have a slump of 30 50mm with use of approved plasticizer if required formwork of plastic cells should be made of high density polyethylene ( hdpe ) , sheets having thickness ranging from 0.19 0.22mm with sides 150mmx150mm and height as fixed by engineer in charge. to be laid in full width of the carriageway. iron spikes of about 200mm long are to be used to keep the cell walls taut. nylon thread or rope may be used to preventcollapse of cells during placement of concrete. iron spikes to be taken out for use in other place as soon as the concrete is in place. curing of concrete slabs for 14 days, curing compound ( where specified ) and water finishing to lines and grade as per drawing and mord specification of cell filled concrete pavement.150mm thickness 51 providing and laying reinforced cement concrete pipe np3 for culverts on first class bedding of granularmaterial in single row includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets clause 1106.np3 pipes 300 mm dia 52 routine maintenance work after completiion of works for five years fixed amount....
40
Medical Health And Family Welfare - Rajasthan
36433514 electrical work in the construction of phc building at badka ( laxmangarh ) distt. alwar wiring of light point / fan point / exhaust fan point / call bell point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade ( is:694 ) inrecessed isi marked mms ( is:9537 p iii ) virgin material pvc conduit & itsisi marked ( is:3419 1988 ) accessories, round tiles, 1.2 mm thickhot dipped galvanized modular box with earth terminal, 10a modular switch, modular face plate with grid plate, 3 pin ceiling rose / holder / 3 way connector, screws, making connections, testing etc. as required.for specification of copperconductor, phenolic laminated sheets & electrical / wiring accessories refer chapter e 04, e 05 & e 07 for additional technical parameters of product / work refer annexure a attached with this bsr 3 short point ( up to 3 mtr. ) 4 medium point ( up to 6 mtr. ) 5 long point ( up to 10 mtr. ) 6 wiring of twin control light point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade ( is:694 ) in recessed isi markedmms ( is:9537 p iii ) pvc conduit & its isi marked ( is:3419 1988 ) accessories, round tiles, 2 nos hot dipped galvanized m.s modularbox of 1.2 mm thickwith earth terminal, 2 nos10 a two way modular switch, 3 pin ceiling rose / holder / 3 way connector , modular face plate with grid plate, screws, making connections, testing etc. as required.for specification of copperconductor, phenolic laminated sheets & electrical / wiring accessories refer chapter e 04, e 05 & e 07 for additional technical parameters of product / work refer annexure a attached with this bsr 7 medium point ( up to 6 mtr. ) 8 long point ( up to 10 mtr. ) 9 wiring of 3 / 5 pin 6 amp. light plug point with 1.5 sq. mm nominal sizefr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade ( is:694 ) inrecessed isi marked mms ( is:9537 p iii ) pvc conduit & its isi marked ( is:3419 1988 ) accessories, hot dipped galvanizedmodular box of 1.2 mm thick with earth terminal, 10 a modularswitch, 3 / 5 pin 6 a modular socket, modular face plate with grid plate, screws, making connections, testing etc. as required.for specification of copperconductor, phenolic laminated sheets & electrical / wiring accessories refer chapter e 04, e 05 & e 07 for additional technical parameters of product / work refer annexure a attached with this bsr 10 on board 11 s&f following sizes ( dia. ) of isi marked virgin material mms ( is:9537 p iii ) pvc conduit along withisi marked ( is:3419 1988 ) accessories as requiredinrecessincludingcutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure a attached with this bsr 12 20 mm 13 25 mm 14 32 mm 15 supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked ( is:694 ) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from99.90 % purity copper, class 5 stranding in acc. to is:8130 / iec 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation pvc type a / c / d , flame retardant as per is 10810 53, better amperage rating as per is:3961 part 5, in existingsurface or recessed pvc / ms conduit / casing capping making connections with copper lugs of suitable size, ferrules, testing etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of product / work refer annexure a attached with this bsr 16 1 x 1.5 sq.mm 17 3x 1.5 sq.mm 18 2 x 2.5 sq. mm. + 1x1.5sqmm 19 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 20 4 x 10.0 sq.mm 21 4 x 6.0 sq.mm 22 1 x 4.0 sq.mm 23 1 x 2.5 sq.mm 24 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm. 25 supplying and drawing pe insulated & pvc sheathed unarmoured telephone cable with 0.5 mm dia. solid annealed electrolytic grade bare copper conductor as per is: 8130 / 84 &confirming to tec specification gr / wir / 06 03 march 2002in existingsurface or recessed conduit / casing capping. including ferruling on each pair for identification etc. as required. for additional technical parameters of product / work refer annexure a attached with this bsr 26 2 pair 27 p & f in position frame made out of m.s. angle ( riveted or welded ) finished with two coats of red oxide and two coats enamel paint including cutting, welding, holes etc.of following sizes as required.for additional technical parameters of product / work refer annexure a attached with this bsr 28 40mm x 40mm x 5mm 29 p & f paper phenolic resin bondedlaminates confirming to is : 2036 1995 for boxes / frames including making holes for switches etc, with brass screws, washers / zinc platednut and bolts as required. for additional technical parameters of product / work refer annexure a attached with this bsr 30 6.4 mm thick 31 p & f phenolic laminated sheet 2.0 mm thick of following size . including screws, cup washer as required.for additional technical parameters of product / work refer annexure a attached with this bsr 32 75 mm dia 33 providing & fixing of 240 / 415 v ac mcb with positive isolation of 10 ka breaking capacity ( b / c / d tripping characteristic as per type of load andsite requirement ) 4 kv impulse withstand voltage, isi marked is 8828 ( 1996 ) / conforming to iec 60898 1 2002, iec 60947 2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , ip 20 contact protection and fitted inexisting distribution board / sheets, minimum electrical operation 20, 000 upto 20 a rating and 10, 000 upto 63 a, 5000 for 80 a & above ratingincluding making connections, testing etc. as required. oem shall have submitnabl / cpri / erda accrediated lab type test reports& all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure a attached with this bsr 34 single pole mcb ( with b / c curve tripping characteristics ) 35 6 a to 32 a rating 36 double pole mcb ( with b / c curve tripping characteristics ) 37 6 a to 32 a rating 38 four pole mcb ( with b / c curve tripping characteristics ) 39 6 a to 32 a rating 40 50 / 63 a rating 41 providing & fixing of recessed / surface mounting heavy duty horizontal type double door ( metal / glazed ) distribution board with metal end box made out from galvanized steel / crca sheet not less then 1.2 mm thick conforming to is 8623 1 & 3 / iec 61439 1 & 3, powder painted complete with reversible door ( for double door db only ) 100 amp. insulated copper bus bar / shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar, masking sheet, making internal db terminations with copper lugs, ferrules, detachable gland plate, including making connections, testing etc. as required. oem shall have submitnabl / cpri / erda accrediated lab type test reports& all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure a attached with this bsr 42 metal door ( single phase ) ik 09 and ip 43 with metal end box 43 16 way ( 16+2 ) 44 metal door ( three phase ) ik 09 and ip 43with metal end box 45 6 way 46 p&f metal clad / plastic industrial plug top & socket unit with pin and sleeve type contact on porcelain / bakelite base in recessed / surface mounting heavy duty enclosure made out from galvanized steel / crca sheet not less then 1.2 mm thick conforming to is 8623 1 & 3 / iec 61439 1 & 3. powder painted ( without mcb ) including making connections, testing etc.as required.for additional technical parameters of product / work refer annexure a attached with this bsr 47 20 amp, 3 pin + scrapping earth, 4 module 48 p & f of industrial plug and socket conforming to iec 60309 1 / 2 made out of self extinguishing engineering polymer / polyamide, nickel plated brass sleeve and pins, socket with shutter including making connection etc as reqd. for additional technical parameters of product / work refer annexure a attached with this bsr 49 ip 67 panel mounted socket 50 32 a 3 pin ( 2p+e ) 51 providing & fixing of flush typenon modular single line telephone jackmade out fromindustrial grade polycarbonate or fire resistant abs material, including making connection testing etc. as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 52 providing & fixing of ding dong / musical chime bell as per pwd specification for electrical works, including making connection testing etc. as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 53 providing & fixing of modular type 120 w step fan regulator duly isi marked ( is 11037:1984 ) with cm / l no. printedmade out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith ip 20 rating , includingall as per pre approved by engineer in charge, making connections, testing etc. as required.for additional technical parameters of product / work refer annexure a attached with this bsr 54 5 step fan regulator 2 module 360 dgree rotating 55 supplying and fixing of power plug point with modular accessories as per pwd specification for electrical works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal / connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost ofisi marked modular 16 amp. switch ( is :3854 ) and 6 / 16 amp. socket outlet ( is:1293 ) making connection , testing , etc. as required. for specification ofwiring accessories refer chaptere 07related item & for additional technical parameters of product / work refer annexure a attached with this bsr 56 p & f krone module with base framein the recess / surface made out of 1.2 mm thicksheet steel box, front openable, having locking arrangements duly powder painted, including dressing, ferrulingandpunchingof telephone cable with krone tool etc. as required. for additional technical parameters of product / work refer annexure a attached with this bsr 57 10 pairs 58 sitc of ip 42 and general construction confirming to is:8623 : 1993, wall / free standing floor mounted dust and vermin proof compartmentalisedcubical panel as specifications andother parameters requiredas per point ( a ) , ( b ) , ( c ) , ( d ) , ( e ) , ( f ) , ( g ) , ( h ) as below: 59 ( a ) thickness of crca sheet shallbe 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / withoutdetachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided 60 ( b ) complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel.the panel having pe foam / neoprene rubber gasket of not less than 3mm thickness , required hardware , concealed hinged door with key type locking arrangement for equipment / switchgear earthed with 2.5 sq.mm braided copper wire. 61 [ c ) interconnection between bus bar and switchgears / cable shall be rigidly supported and made out by flexible copper wires ( up to 63 amp ) and by solid bus bar ( >63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only.all joints / interconnections of copper bus bar shall be dully tinned . clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar bus bar is insulated by heat shrinkable sleeves . earth and neutral bus bar shall be half of the size of phase bus bar. ( cost of bus bar / flexible wire for interconnection between main busbar and switchgearis to be paid extra ) 62 ( d ) wiring between components within switchgear and incoming / outgoing cableshall be done through the terminal block only. direct connection shall not be permitted. each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. for tap offs, adjacent terminals with shorting strips shall be used. 10% spare terminal blocks shall be provided. wire identification on marking strip shall correspond to the designation of the wiring diagrams. all wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram. 63 ( e ) all wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, wiring between terminals of various devices shall be ‘point to point’ ( no wire splitting or tee connections ) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging. 64 ( f ) floor mounted panel shall be mounted on base frame of ismcchannel size 100 x 50 x 5 mm ( to be paid extra ) 65 ( g ) tests: the insulation resistance ( with 1000 v megger ) and high voltage power frequency test ( by applying a voltage of 2.5kv for one minute ) shall be measured between phases, between phase and neutral and between phase and earth. both before and after high voltage power frequency test. the insulation resistance shall not be less than three megaohm. ct secondary current injection test shall also be carried out. 66 ( h ) only outer surface area on all sides shall be measured & panel to be fabricated only from cpri approved fabricator only ( cpri test certificates to be submitted ) all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 67 supplying and fixing of aluminium ( iec 60105 iso 209 1, 2 ) / copper ( iec 60028 ) bus bar by means of smc / dmc type insulatorwith standard short circuit withstand capacity, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable pvc sleeves. all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 68 electrolytic grade aluminium bus bar 6010 grade 69 providing & fixing of bis approvedcurrent transformeras per pwd specification for electrical works , isi marked as peris 2705 1992 / conforming to iec 60044 1, with secondary terminalof ct shall be brought out suitable to a terminal block which shall be easier accessible for testing and terminal connection , with all necessary support in existing panel including connection etc. as requiredcurrent transformer ring type tape wound / resin cast wound as per is 16227 with, accuracy cl, ct ratio and burden as specified. isf<=5, cu cross section of secondary wire 1.5sqmm ( minimum ) , including all necessary support in existing panel including connection etc. as required . all as per pre approved by engineer in charge.all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 70 ring type tape wound ct 71 c t class 1, ratio 200 / 5 to 300 / 5, burden 10 va 72 providing & fixing of110 / 220 v, unibody led indicatinglamp iec 60947with integral circuit, ip 65 above panel &ip 20 terminal block, approx. body dia for panel not less then 20 mm, length min. 50mm, front led cover dia min.29 mm, contact material phospher bronze for led, pcb contacts shall be ofbrass ( tin plated ) , impulsedielectric tested for 2.5 kv, rated insulation resistance shall be 100 m ohm at 500vdcincluding connection etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 73 red / yellow / green colour 74 providing & fixing of electricalinsulating rubber matts as per pwd specification for electrical works, isi marked confirming to is: 15652 / 2006with one sideanti skid abberation marks and pasting the mat with synthetic rubber adhesive as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 75 3.3 kv, class a 2 mm thick with proof voltage 10 kv ac ( rms ) and break down voltage 30 kv ac ( rms ) 76 sitc of3 / 4pole current limiting moulded case circuit breaker ( mccb ) made of flame retardent & heat resistant materialhaving following current rating, short circuitbreaking capacityat 440 / 415 v, 50 hz; o / l & s / c settings , conforming to is / iec 60947 p 2 :2003 with frontface and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push ( test ) to trip, trip time less then 10 ms under s / c condition, breaking capacity ics = 100% icu. u imp =8 kv, rated insulation voltage690 v.provision for uvr , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connectionsetc. as required.oem shall have submitnabl / cpri / erda accrediated lab type test certificate before execution all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure a attached with this bsr 77 4 pole mccb with thermal magnetic release 78 125 amp , 25 ka, adjustable o / l & adjustable s / c setting, 79 up to 100 amp , 25 ka, adjustable o / l & adjustable s / c setting, 80 providing & fixing of iso certified company made on load change over switch, front handle operated, four pole 415 v as per pwd specificationfor electrical works conforming to is / lec 60947 3 : 1999 including connections , testing etc. as required .in the following rating.appropriate type test certificate / oem test report shall be submitted .all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 81 open execution type 82 160 a 83 providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed arrmouredaluminiumcable confirming to is:1554 p i / is :7098 p i of 1.1 kv withh4 grade electrolyticaluminium conductor confirming to is 8130 of purity >99.6 %, round / flat strip armouring of cables, inner / outer sheath confirming to is:5831in existing rcc / hume / stoneware / pvc pipe / open duct / cable trench / cable tray ( with cable tie ) includingtesting etc. as required of following size. oem must have its own in house nabl accrediated laboratory for testing procedure as per is:10810.for additional technical parameters of product / work refer annexure a attached with this bsr 84 10.0 sq. mm 85 2 core 86 35.0 sq. mm 87 3.5 core 88 supplying and making one end termination with nickel plated heavy duty brass single compression gland ( as per is 12943 1990 ) ) sibg type consisting of check nut, gland body, metal washer ( 3 nos. ) , outer seal rubber ring, compression nut, heavy duty aluminium lugs ( as per is 8309 1993 ) duly crimped with crimping tool, pvc tape as peris 8337 1976offollowing size ofpvc insulated & pvc sheathed / xlpe aluminium conductor cable of 1100 volt grade as required.all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 89 3.5 x 35.0 sq.mm 90 supplying and makingend termination with heavy aluminiumlugs ( pin / ring type ) confirming to is 8309 1993 & is 8337 1976 duly crimped with crimping tool, pvc tape etc of following size.all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 91 35.0 sq.mm 92 supplyandinstallationofhigh tensile low carbon steel rod molecularly bonded with 99.9 % copperthickness ( 250 microns ) andconfirming toul 467, is / iec 62561 2of following size and length and as per point mentioned ( a ) , ( b ) , [ c ) , ( d ) , ( e ) below : 93 ( a ) bore a hole of dia. 100 mm of required length, place the rod in the centre of hole 94 ( b ) filled with anti corrosiveconductivecompounds with the permanent sealings at both the ends, cpri / erdatested with rms capacity of minimum 30 ka for withstanding 1 second .to ensure the moisture content and electrical conductivity, 25 kg for 2000 mm & 50 kgs for 3000mm of resistance lowering earth enhancement material shall be used as a backfill compound. the compound shall be tested form nabl acredeated labfor lowresistivity ( less than 0.12 ohm meter ) & high conductivity in nature with carbon as a major contentas per referance of is 3043 1987, ieee 80 2013 ( clause 14.5d ) , ieee 837 & ier 1956 with latest amendemnts 95 © connect the rod with copper strip / conductor / wire with suitable clamp made from tinned copper and ss 304 bolt 96 ( d ) place heavy duty weather proof poly propylene earth pit chamber with lockable jam free lid suitable for safe working load 5000 kg or more of size top dia. 225 to 260 mm, bottom dia 300 to 350 mm. and height250 to 300 mm. 97 ( d ) testing of earth resistance for value of 5 ohms or lessas required & must record by engineer in charge during site visit and ensure to enter in measurment book. 98 ( e ) test certificatesfor confirming above standards from oem is mandatory. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 99 17.2 mm thick and 3 mtr. long 100 supply & laying following size earth wire in horizontal or vertical run in ground / surface / recess including riveting, soldering, saddles, making connection with gi / cu purity purity >95%thimble etc. as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 101 8 swg copper wire 102 8 swg g.i. ( hot dipped ) wire 103 making of hole in wall ( brick / stone ) of required and placing np 2 rcc pipe ring of required size for housing exhaust fan and making good the same, with cement plaster required of following size. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 104 up to 457 mm size 105 providing & fixing ofbeestar rated copper wounded double ball bearing capacitor start, aluminium body & metallicblade ceilingfanconforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing ( i.e. isi marking ) with down rod up to 80 cm with secondary support safety cable ( steel rope ) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 106 1200 mm sweep bee 2 star rated ( service value >=4.5 to < 5 ) 107 1200 mm sweep bee 3 star rated ( service value >=5.0 to< 5.5 ) 108 p & f 1.2mm thickm.s. recessed fan box, hexagonal / round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mmlength extended on each side . all as per pre approved by engineer in charge.for additional technical parameters of product / work refer annexure a attached with this bsr 109 p & f 1.2mm thickm.s. recessed fan box, hexagonal / round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mmlength extended on each side . all as per pre approved by engineer in charge.for additional technical parameters of product / work refer annexure a attached with this bsr 110 providing & fixing ofof double ball bearing, copper wounded capacitor startsingle phase metallicblade fresh air fan, in existing opening including cost of hardware , flexible 3 core copper conductor , making connections, testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 111 225 mm sweep 112 providing & fixing of heavy duty capacitor start, copper wounddouble ball bearing900 / 1400 rpm single phaseexhaustfan conforming to is:2312 isi marked in existing opening including making connections testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 113 300 mm sweep ( 900 / 1400 rpm ) 114 providing & fixing of wall mounting / pedestal type heavy duty air circulator , double ball bearing and with metal sturdy mesh guard; aluminium alloy one piece blade and conforming to is:2997, including fixing with anchor bolts, making connection testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 115 450 mm sweep wall mounting and three speed regulator with minimum air delivery 150 cum. / minute 116 p & f of gravity louver shutter of superior quality made out of frame of18 swg m.s. sheet & louvers made from 24 swg ms sheetwith enamel paint including cost of nuts, bolts, etc as reqd.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 117 up to 380 mm size 118 providing & fixing of vertical ( bee 5 star rated ) / horizontal ( bee 3 star rated ) storage water heater with outer casing made of engineering plastic sheet ( upto 25 ltr ) / metal rust proof body ( 35 & 50 ltr ) , glass line / titanium enamel coated pressure pump compatible 8 bar pressure inner tank, glass line coated , mineral filled heating element, stem type, snap actionadjustable thermostat , dual indicating lampsinjected puf insulation, multi function valve etc. as required held in position with 2 / 4 no. 10 / 12 mm anchor fastener, duly wired with 3 core 2.5 / 4.0 sqmm pvc insulated & sheathed copper conductor and 16 a / 25a three pin plug top with portable residual current device ( prcd ) , including making inlet, outlet flexible alloyconnection, testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 119 15 ltr. 120 sitc ofmnre approved & confirming to is:12933 p 1, 2, 3 & 5 flat plate collector type solar hot water system havingcollector withzincalum sheet outer body , glass line / titanium enamel coated inner tank with metal rust proof puf insulated body includingelectrical back up, thermostat, powder coated / hot dipped galvanized ms standfor collector & tank etc. as required. of following capacity complete in all respect. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 121 200 litre / day 122 providing & fixing of energy efficient direct fit ( retrofit ) polycarbonate / glasshousingsmd mid power led tube rod ( with integral driver & alumn. heat sink ) , on existing fixture.system lumen efficacy = 100 lm / watt output, internal surge protection of 2.5 kv , thd < 20% , p.f.=0.95, cri >80 , life time of minimum35000 burning hours with , 70% of intial lumen maintaned till life ends, cct 3000°k / 4000°k / 5700°k / 6000°k / 6500°k ( as per ansi bin ) , maximum power consumption should not more than the specified rating and fixture shall be ofbis standard andtrade mark certificate ( t.c. ) . manufactures word mark / name engraved / embossing / screen printing onhousing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. ( lm79 & lm80 ) certificate / report from oem shall be submitted.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 123 1200mm , min. lumens output 2000 lmled tube rod with polycarbonate housing 124 providing & fixing of ip 20 led recessed / surface mounted, round / sqauresmd mid power led downlight with power coated die cast aluminum housingwith uv stabilized non yellowish diffuser withbis complience 2.5 kv surge protected isolated driver, with short & open circuit protection, having efficiency > 85% . system lumen efficacy of = 110 lm / watt, thd < 10 % , pf.=0.95, cri >80, life time of minimum50000 burning hours with , 70% of intial lumen maintaned till life ends, cct 3000°k / 4000°k / 5700°k / 6000°k / 6500°k ( as per ansi bin ) , maximum power consumption should not more than the specified rating and fixture shall be ofbis standard andtrade mark certificate ( t.c. ) . manufactures word mark / name engraved / embossing / screen printing onhousing. 125 oem must have its own in house nabl lab setup for all testing facilities for led fixtures. ( lm79 & lm80 ) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 126 surface mounting ( with extruded alumn. housing ) 127 minimum lumen output 1950 lm 128 providing & fixing of ip20, 2x2 led surface / recessedmounting mid power smd type led light fixture not less than 50mm housing depth made from crca sheet steel housing, high purity / transmisivity uv stabilized non yellowish diffuser for uniform light distribution. high efficiency with 4 kv internal / external surge protection bis certified isolated driver having efficiency > 85% , with short & open circuit protection ( integral with light fixture ) . system lumen efficacy of = 120 lm / watt , thd < 10 % , p.f.=0.95, cri >80 , life time of minimum50000 burning hours with , 70% of intial lumen maintaned till life ends, cct 3000°k / 4000°k / 5700°k / 6000°k / 6500°k ( as per ansi bin ) , maximum power consumption should not more than the specified rating and fixture shall be ofbis standard andtrade mark certificate ( t.c. ) . manufactures word mark / name engraved / embossing / screen printing onhousing. 129 oem must have its own in house nabl lab setup for all testing facilities for led fixtures. ( lm79 & lm80 ) certificate / report from oem shall be submitted.all as per pre approved by engineer in charge. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 130 recessed mounting 131 minimum lumen output 4200 lm 132 providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket / pole. fixture made of powder coated single piece pressure die cast aluminummaterial with heat dissipation fins on housing with uv stabilized pc ( uv stablization report submitted for uv cover ) / toughened glass coverand secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm / wt and potted driver& has a unique bis r number withinput voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driverefficiency >85%, thd ( i ) <10%humidity 10% to 90% rh working temp 5c to 45c .driver current <750ma. the luminaireshall be bis certified and trade mark certified. life expectancyequal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min = 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs.manufactures word mark / name engraved / embossing on die cast housing to allow traceability / authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities forled fixtures. ( lm79 / lm80 ) certificate / report with liable warranty of product / accessories from oem shall be submitted. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 133 led street light fixture with minimum lumen output 2450 lm 134 providing & fixing of street light bracket made out from following size of b class , medium class g.i. pipe confirming to is : 1239 p 1 ( 2004 ) with heavy duty pole clamp, saddles suitable fastners etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 135 25 mm dia. 136 supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp ( unshielded twisted pair ) , category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi / tia / eia 568 , the copper conductors should be balanced twisted in pairs, seperated by a cross member fluted pair divider & protected bypvc jacket. certified performance in a 4 connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms / pvc conduits / casing capping including making connections to information outlets and patch panels with jack &ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 137 supply and installation of unsheilded / 360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6 / 6a application complying to latest ammendments, according. to cat. 6 / 6a channel, it should support channel as well as components requirements of cat.6 / 6a standards at frequencies of up to 250 to 500 mhz. cat 6 / 6a unshielded / shielded jack should be suitable to terminate 4 pair, 23 / 24 awg solid / stranded wire diameters, using 100 ohm unshielded / shielded balance twisted pair cable, the jack should have tooless / impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603 7 4 and complied with ansi / tia / eia 568 c.2 standard. jack should be rj11, rj12 & rj45 compatible. should support ethernet 1.2 gb / s atm, digital video and broadband / baseband analog video, voice over internet protocal ( voip ) specifications in existing modular / ms boxes along with necessory connections as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 138 cat 6, un sheilded information outlet 139 supply & fixing of square faceplate for flush / surface mount information outlets single / dual or quad aperture , material should bepc+abs body, suitable for rj45 unshielded / shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 140 single aperture 141 supply , installation and testing of 4 pair, 100 ohm impedance, cat 6 / 6a / class e / ea patch cords should be constructed of minimum 23 / 24 awg, stranded bare copper cable with frpvc / lszh jacket, with an enhanced performance by factory moulded rj45 connectors with strain relief boots as per ansi / tia / eia 568 c.2 suitable for cat 6 / 6a application complying to latest ammendments category 6 / 6a standards, according. to tia568c.2, iso / iec 11801, en 50173, iec 60603 7 51, en 60603 7, ieee 802.3an minimum requirement for 1g base t to 10g base t performance. patch cords shall be straight thru cable compatible with both t568 a and t568 b wiring schemes, should support ieee 802.3af / ieee 802.3at for poe applications, minimum 750 to 1000 mating cycles in plug contacts for long durability, should support ethernet 10gbase t, 1.2 gb / s atm, token ring 4 / 16, digital video and broadband / baseband analog video, voice over internet protocal ( voip ) .all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 142 cat 6, u / utp ( unscreened / un sheilded twisted pair ) patch cord 143 1 mtr 144 supply, installation, & testing of 19 1u rack mounted / surface mounted aluminum / crca 1.2mm powder coated, multimode glass fiber optic cable patch panel / liu loaded with flangless / screwable adapters for st / e 2000 / sc / lc / mt rj / pc type, it should have easy removable top plate with push buttons, there should be a splice tray installed in the patch panel / liu which can handle the fiber cores, splice tray should be pc+abs material, it should include accessories like mounting hardware, gormetts, heat shrink tubes / sleevs, screws, nuts to install the panel for rack / wallmount applications as per requirement complete in all respect. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 145 multi mode liu 12 ports 146 supply & installation of ip 20 & ik 08 , ul listedwall mounted double section communication enclosure ( rack ) made from powder coated ( 60 to 80 micron ) crca sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door, vertical mounting rail 1.6 mm with umarking , with all round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19 angles with wall mounting provision on wall. accessories like: 1 no of 19 1u horizontal cable manager, 1 no of 90 cfm 230v ac fan with 1 mts long cable, mounting hardware , 1 no of 19 1u, mountable socket strips with 5 nos of 5a universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with suitable anchor fastneretc as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 147 6 u rack with width 600 mm &depth 400 mm + 100 mm 148 supply , installation, testing and comissioning ofmanaged layer 2 intelligent 10 / 100 ethernet switch providing 24 x 10 / 100 / 1000 mbps giga ethernet ports / with min 2 sfp giga ports ( provision for fiber giga connectivity ) with related lan base software including making connections etc as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 149 sitc of single stage, water cooled, high speed ( 2880 rpm ) , horizontal, centrifugal, openwell submersible pumps set pre filled with coolent water and fitted with mechanical seal t / c vs t / c, thrust bearing shall be ofcarbon + s.s.the stator body of single phase pumpshall be of ss and rest of all shall be of cast iron. all casting parts should be cathod electro deposition ( ced ) coated and other construction material should be confirming to is : 14220: 2018 . the overall performance of pump shall confirm to bee energy efficiency level of 3 star. valid bee certificate from oem must be submitted for the same. motor should be ie2 class as per iec 60034 2 1: 2007, iec 60034 30: 2008, & is12615:2011, including making connection etc as required complete in all respect. oem shall have submitnabl / cpri / erda accrediatedlab type test certificate before execution. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 150 1.0 hp, 1 ø, ( 7 12 ) mtr, ( 405 240 ) lpm 151 sitc of monoblock motor pump set isi marked ( is:9079 2002 ) with tefc motor, motor should be ie2 class as per iec 60034 2 1: 2007, iec 60034 30: 2008, & is12615:2011. with stainless steel impellor, stainless steel shaft, mechanical seal, single / three phase ( 240 440 v ) permanent split capacitor type ( psc ) , fitted with thermal overload protection, including cost of hardware etc on existing platform complete. pump shall have following hp rating, phase, head, minimum discharge respectively complete in all respect. oem shall have submitnabl / cpri / erda accrediatedlab type test certificate before execution. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 152 1.0 hp, 1 ø, ( 10 120 ) mtr, ( 30 12 ) lpm 153 supply , installation, testing and comissioning ofinverter type air cooled hi wall split type air conditioners with latest star rating system as per bee amended upto date complete with indoor unit ( idu ) , out door unit ( odu ) , surface / concealed copper refrigerant piping with insulation ( closed cell elastomeric nitrile rubber tubular pipe section ) upto 3 mtr ( idu to odu ) , copper power cable upto 3.5 mtr ( idu to odu ) , r 32 / r 410 green refrigerant, wireless remote control, suitable for working between 230v + / 10% with low & high voltage cutoff and50 hz , single phaseacsupply capable of performing cooling, dehumidification, air circulation of following capacity with scroll / rotary compressor. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 154 1.5 tr iseer not less then 3.8 155 providing & fixing of is : 4985 2000 class 4 ( 10 kgf / sqcm ) upvc drain water piping withfittings ( is:7834 & 10kgf / sqcm ) like elbow, socket, tee, solvent cement jointing, support with ms hanger on ceiling or recessed in wallwith chasing & plastering with 6 mmthickclosedcellelastomeric nitrile rubberinsulation including leakage testing etc. as required of following nominal sizes. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 156 25 mm 157 supply, fixing and testing of following capacity iso certified company made wall mounted stabilizer having output voltage variation from 200 v to 250 v ( + / 5% ) with input voltage variation from 170 v to 260 v, time delay facility from 2 to 4 minute and high cutoff at 270 v with providing of 16 amp / 20 amp industrialplug top making connection etc complete in all respect.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 158 4 kva 159 making hole in stone masonary / rcc wall / rcc slab with core cutter for accomodating refrigerant pipe / drain pipe / ms pipe / cables etc of following dia 160 150 mm dia per running inch length 161 supply & fixing ms powder coated stand suitable for 1.0 / 1.5 / 2.0 tr outdoor type of split ac.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 162 supply & fixing of dry powder agent ( as per is 4308:2019 ) , abc typefire extinguisher ( stored pressure type ) conforming to is:15683:2018 , powder coated internal & external surface deep drawn cylinder body of mild steel cr2 grade conforming to is: 513, squeeze grip forged brass release valve with inbuilt safety release device, diaphragm type, 0 to 28 bar range pressure gauge, 450 mm long epdm discharge tube, qr code for product traceability including fixing on wall with suitable anchor fasteners as required of following capacity. test certificates of all the parameters along with hydro test & burst test ( for cylinder body ) certificatefrom oem / external nabl accrediated lab is to be submitted. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 163 4 kg...
41
Medical Health And Family Welfare - Rajasthan
36432928 electrical work in the construction of phc building at duhar chougan ( thanagazi ) distt. alwar wiring of light point / fan point / exhaust fan point / call bell point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade ( is:694 ) inrecessed isi marked mms ( is:9537 p iii ) virgin material pvc conduit & itsisi marked ( is:3419 1988 ) accessories, round tiles, 1.2 mm thickhot dipped galvanized modular box with earth terminal, 10a modular switch, modular face plate with grid plate, 3 pin ceiling rose / holder / 3 way connector, screws, making connections, testing etc. as required.for specification of copperconductor, phenolic laminated sheets & electrical / wiring accessories refer chapter e 04, e 05 & e 07 for additional technical parameters of product / work refer annexure a attached with this bsr 3 short point ( up to 3 mtr. ) 4 medium point ( up to 6 mtr. ) 5 long point ( up to 10 mtr. ) 6 wiring of twin control light point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade ( is:694 ) in recessed isi markedmms ( is:9537 p iii ) pvc conduit & its isi marked ( is:3419 1988 ) accessories, round tiles, 2 nos hot dipped galvanized m.s modularbox of 1.2 mm thickwith earth terminal, 2 nos10 a two way modular switch, 3 pin ceiling rose / holder / 3 way connector , modular face plate with grid plate, screws, making connections, testing etc. as required.for specification of copperconductor, phenolic laminated sheets & electrical / wiring accessories refer chapter e 04, e 05 & e 07 for additional technical parameters of product / work refer annexure a attached with this bsr 7 medium point ( up to 6 mtr. ) 8 long point ( up to 10 mtr. ) 9 wiring of 3 / 5 pin 6 amp. light plug point with 1.5 sq. mm nominal sizefr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade ( is:694 ) inrecessed isi marked mms ( is:9537 p iii ) pvc conduit & its isi marked ( is:3419 1988 ) accessories, hot dipped galvanizedmodular box of 1.2 mm thick with earth terminal, 10 a modularswitch, 3 / 5 pin 6 a modular socket, modular face plate with grid plate, screws, making connections, testing etc. as required.for specification of copperconductor, phenolic laminated sheets & electrical / wiring accessories refer chapter e 04, e 05 & e 07 for additional technical parameters of product / work refer annexure a attached with this bsr 10 on board 11 s&f following sizes ( dia. ) of isi marked virgin material mms ( is:9537 p iii ) pvc conduit along withisi marked ( is:3419 1988 ) accessories as requiredinrecessincludingcutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure a attached with this bsr 12 20 mm 13 25 mm 14 32 mm 15 supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked ( is:694 ) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from99.90 % purity copper, class 5 stranding in acc. to is:8130 / iec 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation pvc type a / c / d , flame retardant as per is 10810 53, better amperage rating as per is:3961 part 5, in existingsurface or recessed pvc / ms conduit / casing capping making connections with copper lugs of suitable size, ferrules, testing etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of product / work refer annexure a attached with this bsr 16 1 x 1.5 sq.mm 17 3x 1.5 sq.mm 18 2 x 2.5 sq. mm. + 1x1.5sqmm 19 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 20 4 x 10.0 sq.mm 21 4 x 6.0 sq.mm 22 1 x 4.0 sq.mm 23 1 x 2.5 sq.mm 24 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm. 25 supplying and drawing pe insulated & pvc sheathed unarmoured telephone cable with 0.5 mm dia. solid annealed electrolytic grade bare copper conductor as per is: 8130 / 84 &confirming to tec specification gr / wir / 06 03 march 2002in existingsurface or recessed conduit / casing capping. including ferruling on each pair for identification etc. as required. for additional technical parameters of product / work refer annexure a attached with this bsr 26 2 pair 27 p & f in position frame made out of m.s. angle ( riveted or welded ) finished with two coats of red oxide and two coats enamel paint including cutting, welding, holes etc.of following sizes as required.for additional technical parameters of product / work refer annexure a attached with this bsr 28 40mm x 40mm x 5mm 29 p & f paper phenolic resin bondedlaminates confirming to is : 2036 1995 for boxes / frames including making holes for switches etc, with brass screws, washers / zinc platednut and bolts as required. for additional technical parameters of product / work refer annexure a attached with this bsr 30 6.4 mm thick 31 p & f phenolic laminated sheet 2.0 mm thick of following size . including screws, cup washer as required.for additional technical parameters of product / work refer annexure a attached with this bsr 32 75 mm dia 33 providing & fixing of 240 / 415 v ac mcb with positive isolation of 10 ka breaking capacity ( b / c / d tripping characteristic as per type of load andsite requirement ) 4 kv impulse withstand voltage, isi marked is 8828 ( 1996 ) / conforming to iec 60898 1 2002, iec 60947 2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , ip 20 contact protection and fitted inexisting distribution board / sheets, minimum electrical operation 20, 000 upto 20 a rating and 10, 000 upto 63 a, 5000 for 80 a & above ratingincluding making connections, testing etc. as required. oem shall have submitnabl / cpri / erda accrediated lab type test reports& all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure a attached with this bsr 34 single pole mcb ( with b / c curve tripping characteristics ) 35 6 a to 32 a rating 36 double pole mcb ( with b / c curve tripping characteristics ) 37 6 a to 32 a rating 38 four pole mcb ( with b / c curve tripping characteristics ) 39 6 a to 32 a rating 40 50 / 63 a rating 41 providing & fixing of recessed / surface mounting heavy duty horizontal type double door ( metal / glazed ) distribution board with metal end box made out from galvanized steel / crca sheet not less then 1.2 mm thick conforming to is 8623 1 & 3 / iec 61439 1 & 3, powder painted complete with reversible door ( for double door db only ) 100 amp. insulated copper bus bar / shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar, masking sheet, making internal db terminations with copper lugs, ferrules, detachable gland plate, including making connections, testing etc. as required. oem shall have submitnabl / cpri / erda accrediated lab type test reports& all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure a attached with this bsr 42 metal door ( single phase ) ik 09 and ip 43 with metal end box 43 16 way ( 16+2 ) 44 metal door ( three phase ) ik 09 and ip 43with metal end box 45 6 way 46 p&f metal clad / plastic industrial plug top & socket unit with pin and sleeve type contact on porcelain / bakelite base in recessed / surface mounting heavy duty enclosure made out from galvanized steel / crca sheet not less then 1.2 mm thick conforming to is 8623 1 & 3 / iec 61439 1 & 3. powder painted ( without mcb ) including making connections, testing etc.as required.for additional technical parameters of product / work refer annexure a attached with this bsr 47 20 amp, 3 pin + scrapping earth, 4 module 48 p & f of industrial plug and socket conforming to iec 60309 1 / 2 made out of self extinguishing engineering polymer / polyamide, nickel plated brass sleeve and pins, socket with shutter including making connection etc as reqd. for additional technical parameters of product / work refer annexure a attached with this bsr 49 ip 67 panel mounted socket 50 32 a 3 pin ( 2p+e ) 51 providing & fixing of flush typenon modular single line telephone jackmade out fromindustrial grade polycarbonate or fire resistant abs material, including making connection testing etc. as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 52 providing & fixing of ding dong / musical chime bell as per pwd specification for electrical works, including making connection testing etc. as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 53 providing & fixing of modular type 120 w step fan regulator duly isi marked ( is 11037:1984 ) with cm / l no. printedmade out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith ip 20 rating , includingall as per pre approved by engineer in charge, making connections, testing etc. as required.for additional technical parameters of product / work refer annexure a attached with this bsr 54 5 step fan regulator 2 module 360 dgree rotating 55 supplying and fixing of power plug point with modular accessories as per pwd specification for electrical works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal / connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost ofisi marked modular 16 amp. switch ( is :3854 ) and 6 / 16 amp. socket outlet ( is:1293 ) making connection , testing , etc. as required. for specification ofwiring accessories refer chaptere 07related item & for additional technical parameters of product / work refer annexure a attached with this bsr 56 p & f krone module with base framein the recess / surface made out of 1.2 mm thicksheet steel box, front openable, having locking arrangements duly powder painted, including dressing, ferrulingandpunchingof telephone cable with krone tool etc. as required. for additional technical parameters of product / work refer annexure a attached with this bsr 57 10 pairs 58 sitc of ip 42 and general construction confirming to is:8623 : 1993, wall / free standing floor mounted dust and vermin proof compartmentalisedcubical panel as specifications andother parameters requiredas per point ( a ) , ( b ) , ( c ) , ( d ) , ( e ) , ( f ) , ( g ) , ( h ) as below: 59 ( a ) thickness of crca sheet shallbe 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / withoutdetachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided 60 ( b ) complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel.the panel having pe foam / neoprene rubber gasket of not less than 3mm thickness , required hardware , concealed hinged door with key type locking arrangement for equipment / switchgear earthed with 2.5 sq.mm braided copper wire. 61 [ c ) interconnection between bus bar and switchgears / cable shall be rigidly supported and made out by flexible copper wires ( up to 63 amp ) and by solid bus bar ( >63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only.all joints / interconnections of copper bus bar shall be dully tinned . clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar bus bar is insulated by heat shrinkable sleeves . earth and neutral bus bar shall be half of the size of phase bus bar. ( cost of bus bar / flexible wire for interconnection between main busbar and switchgearis to be paid extra ) 62 ( d ) wiring between components within switchgear and incoming / outgoing cableshall be done through the terminal block only. direct connection shall not be permitted. each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. for tap offs, adjacent terminals with shorting strips shall be used. 10% spare terminal blocks shall be provided. wire identification on marking strip shall correspond to the designation of the wiring diagrams. all wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram. 63 ( e ) all wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, wiring between terminals of various devices shall be ‘point to point’ ( no wire splitting or tee connections ) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging. 64 ( f ) floor mounted panel shall be mounted on base frame of ismcchannel size 100 x 50 x 5 mm ( to be paid extra ) 65 ( g ) tests: the insulation resistance ( with 1000 v megger ) and high voltage power frequency test ( by applying a voltage of 2.5kv for one minute ) shall be measured between phases, between phase and neutral and between phase and earth. both before and after high voltage power frequency test. the insulation resistance shall not be less than three megaohm. ct secondary current injection test shall also be carried out. 66 ( h ) only outer surface area on all sides shall be measured & panel to be fabricated only from cpri approved fabricator only ( cpri test certificates to be submitted ) all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 67 supplying and fixing of aluminium ( iec 60105 iso 209 1, 2 ) / copper ( iec 60028 ) bus bar by means of smc / dmc type insulatorwith standard short circuit withstand capacity, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable pvc sleeves. all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 68 electrolytic grade aluminium bus bar 6010 grade 69 providing & fixing of bis approvedcurrent transformeras per pwd specification for electrical works , isi marked as peris 2705 1992 / conforming to iec 60044 1, with secondary terminalof ct shall be brought out suitable to a terminal block which shall be easier accessible for testing and terminal connection , with all necessary support in existing panel including connection etc. as requiredcurrent transformer ring type tape wound / resin cast wound as per is 16227 with, accuracy cl, ct ratio and burden as specified. isf<=5, cu cross section of secondary wire 1.5sqmm ( minimum ) , including all necessary support in existing panel including connection etc. as required . all as per pre approved by engineer in charge.all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 70 ring type tape wound ct 71 c t class 1, ratio 200 / 5 to 300 / 5, burden 10 va 72 providing & fixing of110 / 220 v, unibody led indicatinglamp iec 60947with integral circuit, ip 65 above panel &ip 20 terminal block, approx. body dia for panel not less then 20 mm, length min. 50mm, front led cover dia min.29 mm, contact material phospher bronze for led, pcb contacts shall be ofbrass ( tin plated ) , impulsedielectric tested for 2.5 kv, rated insulation resistance shall be 100 m ohm at 500vdcincluding connection etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 73 red / yellow / green colour 74 providing & fixing of electricalinsulating rubber matts as per pwd specification for electrical works, isi marked confirming to is: 15652 / 2006with one sideanti skid abberation marks and pasting the mat with synthetic rubber adhesive as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 75 3.3 kv, class a 2 mm thick with proof voltage 10 kv ac ( rms ) and break down voltage 30 kv ac ( rms ) 76 sitc of3 / 4pole current limiting moulded case circuit breaker ( mccb ) made of flame retardent & heat resistant materialhaving following current rating, short circuitbreaking capacityat 440 / 415 v, 50 hz; o / l & s / c settings , conforming to is / iec 60947 p 2 :2003 with frontface and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push ( test ) to trip, trip time less then 10 ms under s / c condition, breaking capacity ics = 100% icu. u imp =8 kv, rated insulation voltage690 v.provision for uvr , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connectionsetc. as required.oem shall have submitnabl / cpri / erda accrediated lab type test certificate before execution all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure a attached with this bsr 77 4 pole mccb with thermal magnetic release 78 125 amp , 25 ka, adjustable o / l & adjustable s / c setting, 79 up to 100 amp , 25 ka, adjustable o / l & adjustable s / c setting, 80 providing & fixing of iso certified company made on load change over switch, front handle operated, four pole 415 v as per pwd specificationfor electrical works conforming to is / lec 60947 3 : 1999 including connections , testing etc. as required .in the following rating.appropriate type test certificate / oem test report shall be submitted .all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 81 open execution type 82 160 a 83 providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed arrmouredaluminiumcable confirming to is:1554 p i / is :7098 p i of 1.1 kv withh4 grade electrolyticaluminium conductor confirming to is 8130 of purity >99.6 %, round / flat strip armouring of cables, inner / outer sheath confirming to is:5831in existing rcc / hume / stoneware / pvc pipe / open duct / cable trench / cable tray ( with cable tie ) includingtesting etc. as required of following size. oem must have its own in house nabl accrediated laboratory for testing procedure as per is:10810.for additional technical parameters of product / work refer annexure a attached with this bsr 84 10.0 sq. mm 85 2 core 86 35.0 sq. mm 87 3.5 core 88 supplying and making one end termination with nickel plated heavy duty brass single compression gland ( as per is 12943 1990 ) ) sibg type consisting of check nut, gland body, metal washer ( 3 nos. ) , outer seal rubber ring, compression nut, heavy duty aluminium lugs ( as per is 8309 1993 ) duly crimped with crimping tool, pvc tape as peris 8337 1976offollowing size ofpvc insulated & pvc sheathed / xlpe aluminium conductor cable of 1100 volt grade as required.all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 89 3.5 x 35.0 sq.mm 90 supplying and makingend termination with heavy aluminiumlugs ( pin / ring type ) confirming to is 8309 1993 & is 8337 1976 duly crimped with crimping tool, pvc tape etc of following size.all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 91 35.0 sq.mm 92 supplyandinstallationofhigh tensile low carbon steel rod molecularly bonded with 99.9 % copperthickness ( 250 microns ) andconfirming toul 467, is / iec 62561 2of following size and length and as per point mentioned ( a ) , ( b ) , [ c ) , ( d ) , ( e ) below : 93 ( a ) bore a hole of dia. 100 mm of required length, place the rod in the centre of hole 94 ( b ) filled with anti corrosiveconductivecompounds with the permanent sealings at both the ends, cpri / erdatested with rms capacity of minimum 30 ka for withstanding 1 second .to ensure the moisture content and electrical conductivity, 25 kg for 2000 mm & 50 kgs for 3000mm of resistance lowering earth enhancement material shall be used as a backfill compound. the compound shall be tested form nabl acredeated labfor lowresistivity ( less than 0.12 ohm meter ) & high conductivity in nature with carbon as a major contentas per referance of is 3043 1987, ieee 80 2013 ( clause 14.5d ) , ieee 837 & ier 1956 with latest amendemnts 95 © connect the rod with copper strip / conductor / wire with suitable clamp made from tinned copper and ss 304 bolt 96 ( d ) place heavy duty weather proof poly propylene earth pit chamber with lockable jam free lid suitable for safe working load 5000 kg or more of size top dia. 225 to 260 mm, bottom dia 300 to 350 mm. and height250 to 300 mm. 97 ( d ) testing of earth resistance for value of 5 ohms or lessas required & must record by engineer in charge during site visit and ensure to enter in measurment book. 98 ( e ) test certificatesfor confirming above standards from oem is mandatory. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 99 17.2 mm thick and 3 mtr. long 100 supply & laying following size earth wire in horizontal or vertical run in ground / surface / recess including riveting, soldering, saddles, making connection with gi / cu purity purity >95%thimble etc. as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 101 8 swg copper wire 102 8 swg g.i. ( hot dipped ) wire 103 making of hole in wall ( brick / stone ) of required and placing np 2 rcc pipe ring of required size for housing exhaust fan and making good the same, with cement plaster required of following size. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 104 up to 457 mm size 105 providing & fixing ofbeestar rated copper wounded double ball bearing capacitor start, aluminium body & metallicblade ceilingfanconforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing ( i.e. isi marking ) with down rod up to 80 cm with secondary support safety cable ( steel rope ) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 106 1200 mm sweep bee 2 star rated ( service value >=4.5 to < 5 ) 107 1200 mm sweep bee 3 star rated ( service value >=5.0 to< 5.5 ) 108 p & f 1.2mm thickm.s. recessed fan box, hexagonal / round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mmlength extended on each side . all as per pre approved by engineer in charge.for additional technical parameters of product / work refer annexure a attached with this bsr 109 p & f 1.2mm thickm.s. recessed fan box, hexagonal / round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mmlength extended on each side . all as per pre approved by engineer in charge.for additional technical parameters of product / work refer annexure a attached with this bsr 110 providing & fixing ofof double ball bearing, copper wounded capacitor startsingle phase metallicblade fresh air fan, in existing opening including cost of hardware , flexible 3 core copper conductor , making connections, testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 111 225 mm sweep 112 providing & fixing of heavy duty capacitor start, copper wounddouble ball bearing900 / 1400 rpm single phaseexhaustfan conforming to is:2312 isi marked in existing opening including making connections testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 113 300 mm sweep ( 900 / 1400 rpm ) 114 providing & fixing of wall mounting / pedestal type heavy duty air circulator , double ball bearing and with metal sturdy mesh guard; aluminium alloy one piece blade and conforming to is:2997, including fixing with anchor bolts, making connection testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 115 450 mm sweep wall mounting and three speed regulator with minimum air delivery 150 cum. / minute 116 p & f of gravity louver shutter of superior quality made out of frame of18 swg m.s. sheet & louvers made from 24 swg ms sheetwith enamel paint including cost of nuts, bolts, etc as reqd.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 117 up to 380 mm size 118 providing & fixing of vertical ( bee 5 star rated ) / horizontal ( bee 3 star rated ) storage water heater with outer casing made of engineering plastic sheet ( upto 25 ltr ) / metal rust proof body ( 35 & 50 ltr ) , glass line / titanium enamel coated pressure pump compatible 8 bar pressure inner tank, glass line coated , mineral filled heating element, stem type, snap actionadjustable thermostat , dual indicating lampsinjected puf insulation, multi function valve etc. as required held in position with 2 / 4 no. 10 / 12 mm anchor fastener, duly wired with 3 core 2.5 / 4.0 sqmm pvc insulated & sheathed copper conductor and 16 a / 25a three pin plug top with portable residual current device ( prcd ) , including making inlet, outlet flexible alloyconnection, testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 119 15 ltr. 120 sitc ofmnre approved & confirming to is:12933 p 1, 2, 3 & 5 flat plate collector type solar hot water system havingcollector withzincalum sheet outer body , glass line / titanium enamel coated inner tank with metal rust proof puf insulated body includingelectrical back up, thermostat, powder coated / hot dipped galvanized ms standfor collector & tank etc. as required. of following capacity complete in all respect. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 121 200 litre / day 122 providing & fixing of energy efficient direct fit ( retrofit ) polycarbonate / glasshousingsmd mid power led tube rod ( with integral driver & alumn. heat sink ) , on existing fixture.system lumen efficacy = 100 lm / watt output, internal surge protection of 2.5 kv , thd < 20% , p.f.=0.95, cri >80 , life time of minimum35000 burning hours with , 70% of intial lumen maintaned till life ends, cct 3000°k / 4000°k / 5700°k / 6000°k / 6500°k ( as per ansi bin ) , maximum power consumption should not more than the specified rating and fixture shall be ofbis standard andtrade mark certificate ( t.c. ) . manufactures word mark / name engraved / embossing / screen printing onhousing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. ( lm79 & lm80 ) certificate / report from oem shall be submitted.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 123 1200mm , min. lumens output 2000 lmled tube rod with polycarbonate housing 124 providing & fixing of ip 20 led recessed / surface mounted, round / sqauresmd mid power led downlight with power coated die cast aluminum housingwith uv stabilized non yellowish diffuser withbis complience 2.5 kv surge protected isolated driver, with short & open circuit protection, having efficiency > 85% . system lumen efficacy of = 110 lm / watt, thd < 10 % , pf.=0.95, cri >80, life time of minimum50000 burning hours with , 70% of intial lumen maintaned till life ends, cct 3000°k / 4000°k / 5700°k / 6000°k / 6500°k ( as per ansi bin ) , maximum power consumption should not more than the specified rating and fixture shall be ofbis standard andtrade mark certificate ( t.c. ) . manufactures word mark / name engraved / embossing / screen printing onhousing. 125 oem must have its own in house nabl lab setup for all testing facilities for led fixtures. ( lm79 & lm80 ) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 126 surface mounting ( with extruded alumn. housing ) 127 minimum lumen output 1950 lm 128 providing & fixing of ip20, 2x2 led surface / recessedmounting mid power smd type led light fixture not less than 50mm housing depth made from crca sheet steel housing, high purity / transmisivity uv stabilized non yellowish diffuser for uniform light distribution. high efficiency with 4 kv internal / external surge protection bis certified isolated driver having efficiency > 85% , with short & open circuit protection ( integral with light fixture ) . system lumen efficacy of = 120 lm / watt , thd < 10 % , p.f.=0.95, cri >80 , life time of minimum50000 burning hours with , 70% of intial lumen maintaned till life ends, cct 3000°k / 4000°k / 5700°k / 6000°k / 6500°k ( as per ansi bin ) , maximum power consumption should not more than the specified rating and fixture shall be ofbis standard andtrade mark certificate ( t.c. ) . manufactures word mark / name engraved / embossing / screen printing onhousing. 129 oem must have its own in house nabl lab setup for all testing facilities for led fixtures. ( lm79 & lm80 ) certificate / report from oem shall be submitted.all as per pre approved by engineer in charge. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 130 recessed mounting 131 minimum lumen output 4200 lm 132 providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket / pole. fixture made of powder coated single piece pressure die cast aluminummaterial with heat dissipation fins on housing with uv stabilized pc ( uv stablization report submitted for uv cover ) / toughened glass coverand secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm / wt and potted driver& has a unique bis r number withinput voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driverefficiency >85%, thd ( i ) <10%humidity 10% to 90% rh working temp 5c to 45c .driver current <750ma. the luminaireshall be bis certified and trade mark certified. life expectancyequal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min = 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs.manufactures word mark / name engraved / embossing on die cast housing to allow traceability / authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities forled fixtures. ( lm79 / lm80 ) certificate / report with liable warranty of product / accessories from oem shall be submitted. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 133 led street light fixture with minimum lumen output 2450 lm 134 providing & fixing of street light bracket made out from following size of b class , medium class g.i. pipe confirming to is : 1239 p 1 ( 2004 ) with heavy duty pole clamp, saddles suitable fastners etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 135 25 mm dia. 136 supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp ( unshielded twisted pair ) , category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi / tia / eia 568 , the copper conductors should be balanced twisted in pairs, seperated by a cross member fluted pair divider & protected bypvc jacket. certified performance in a 4 connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms / pvc conduits / casing capping including making connections to information outlets and patch panels with jack &ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 137 supply and installation of unsheilded / 360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6 / 6a application complying to latest ammendments, according. to cat. 6 / 6a channel, it should support channel as well as components requirements of cat.6 / 6a standards at frequencies of up to 250 to 500 mhz. cat 6 / 6a unshielded / shielded jack should be suitable to terminate 4 pair, 23 / 24 awg solid / stranded wire diameters, using 100 ohm unshielded / shielded balance twisted pair cable, the jack should have tooless / impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603 7 4 and complied with ansi / tia / eia 568 c.2 standard. jack should be rj11, rj12 & rj45 compatible. should support ethernet 1.2 gb / s atm, digital video and broadband / baseband analog video, voice over internet protocal ( voip ) specifications in existing modular / ms boxes along with necessory connections as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 138 cat 6, un sheilded information outlet 139 supply & fixing of square faceplate for flush / surface mount information outlets single / dual or quad aperture , material should bepc+abs body, suitable for rj45 unshielded / shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 140 single aperture 141 supply , installation and testing of 4 pair, 100 ohm impedance, cat 6 / 6a / class e / ea patch cords should be constructed of minimum 23 / 24 awg, stranded bare copper cable with frpvc / lszh jacket, with an enhanced performance by factory moulded rj45 connectors with strain relief boots as per ansi / tia / eia 568 c.2 suitable for cat 6 / 6a application complying to latest ammendments category 6 / 6a standards, according. to tia568c.2, iso / iec 11801, en 50173, iec 60603 7 51, en 60603 7, ieee 802.3an minimum requirement for 1g base t to 10g base t performance. patch cords shall be straight thru cable compatible with both t568 a and t568 b wiring schemes, should support ieee 802.3af / ieee 802.3at for poe applications, minimum 750 to 1000 mating cycles in plug contacts for long durability, should support ethernet 10gbase t, 1.2 gb / s atm, token ring 4 / 16, digital video and broadband / baseband analog video, voice over internet protocal ( voip ) .all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 142 cat 6, u / utp ( unscreened / un sheilded twisted pair ) patch cord 143 1 mtr 144 supply, installation, & testing of 19 1u rack mounted / surface mounted aluminum / crca 1.2mm powder coated, multimode glass fiber optic cable patch panel / liu loaded with flangless / screwable adapters for st / e 2000 / sc / lc / mt rj / pc type, it should have easy removable top plate with push buttons, there should be a splice tray installed in the patch panel / liu which can handle the fiber cores, splice tray should be pc+abs material, it should include accessories like mounting hardware, gormetts, heat shrink tubes / sleevs, screws, nuts to install the panel for rack / wallmount applications as per requirement complete in all respect. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 145 multi mode liu 12 ports 146 supply & installation of ip 20 & ik 08 , ul listedwall mounted double section communication enclosure ( rack ) made from powder coated ( 60 to 80 micron ) crca sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door, vertical mounting rail 1.6 mm with umarking , with all round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19 angles with wall mounting provision on wall. accessories like: 1 no of 19 1u horizontal cable manager, 1 no of 90 cfm 230v ac fan with 1 mts long cable, mounting hardware , 1 no of 19 1u, mountable socket strips with 5 nos of 5a universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with suitable anchor fastneretc as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 147 6 u rack with width 600 mm &depth 400 mm + 100 mm 148 supply , installation, testing and comissioning ofmanaged layer 2 intelligent 10 / 100 ethernet switch providing 24 x 10 / 100 / 1000 mbps giga ethernet ports / with min 2 sfp giga ports ( provision for fiber giga connectivity ) with related lan base software including making connections etc as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 149 sitc of single stage, water cooled, high speed ( 2880 rpm ) , horizontal, centrifugal, openwell submersible pumps set pre filled with coolent water and fitted with mechanical seal t / c vs t / c, thrust bearing shall be ofcarbon + s.s.the stator body of single phase pumpshall be of ss and rest of all shall be of cast iron. all casting parts should be cathod electro deposition ( ced ) coated and other construction material should be confirming to is : 14220: 2018 . the overall performance of pump shall confirm to bee energy efficiency level of 3 star. valid bee certificate from oem must be submitted for the same. motor should be ie2 class as per iec 60034 2 1: 2007, iec 60034 30: 2008, & is12615:2011, including making connection etc as required complete in all respect. oem shall have submitnabl / cpri / erda accrediatedlab type test certificate before execution. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 150 1.0 hp, 1 ø, ( 7 12 ) mtr, ( 405 240 ) lpm 151 sitc of monoblock motor pump set isi marked ( is:9079 2002 ) with tefc motor, motor should be ie2 class as per iec 60034 2 1: 2007, iec 60034 30: 2008, & is12615:2011. with stainless steel impellor, stainless steel shaft, mechanical seal, single / three phase ( 240 440 v ) permanent split capacitor type ( psc ) , fitted with thermal overload protection, including cost of hardware etc on existing platform complete. pump shall have following hp rating, phase, head, minimum discharge respectively complete in all respect. oem shall have submitnabl / cpri / erda accrediatedlab type test certificate before execution. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 152 1.0 hp, 1 ø, ( 10 120 ) mtr, ( 30 12 ) lpm 153 supply , installation, testing and comissioning ofinverter type air cooled hi wall split type air conditioners with latest star rating system as per bee amended upto date complete with indoor unit ( idu ) , out door unit ( odu ) , surface / concealed copper refrigerant piping with insulation ( closed cell elastomeric nitrile rubber tubular pipe section ) upto 3 mtr ( idu to odu ) , copper power cable upto 3.5 mtr ( idu to odu ) , r 32 / r 410 green refrigerant, wireless remote control, suitable for working between 230v + / 10% with low & high voltage cutoff and50 hz , single phaseacsupply capable of performing cooling, dehumidification, air circulation of following capacity with scroll / rotary compressor. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 154 1.5 tr iseer not less then 3.8 155 providing & fixing of is : 4985 2000 class 4 ( 10 kgf / sqcm ) upvc drain water piping withfittings ( is:7834 & 10kgf / sqcm ) like elbow, socket, tee, solvent cement jointing, support with ms hanger on ceiling or recessed in wallwith chasing & plastering with 6 mmthickclosedcellelastomeric nitrile rubberinsulation including leakage testing etc. as required of following nominal sizes. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 156 25 mm 157 supply, fixing and testing of following capacity iso certified company made wall mounted stabilizer having output voltage variation from 200 v to 250 v ( + / 5% ) with input voltage variation from 170 v to 260 v, time delay facility from 2 to 4 minute and high cutoff at 270 v with providing of 16 amp / 20 amp industrialplug top making connection etc complete in all respect.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 158 4 kva 159 making hole in stone masonary / rcc wall / rcc slab with core cutter for accomodating refrigerant pipe / drain pipe / ms pipe / cables etc of following dia 160 150 mm dia per running inch length 161 supply & fixing ms powder coated stand suitable for 1.0 / 1.5 / 2.0 tr outdoor type of split ac.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 162 supply & fixing of dry powder agent ( as per is 4308:2019 ) , abc typefire extinguisher ( stored pressure type ) conforming to is:15683:2018 , powder coated internal & external surface deep drawn cylinder body of mild steel cr2 grade conforming to is: 513, squeeze grip forged brass release valve with inbuilt safety release device, diaphragm type, 0 to 28 bar range pressure gauge, 450 mm long epdm discharge tube, qr code for product traceability including fixing on wall with suitable anchor fasteners as required of following capacity. test certificates of all the parameters along with hydro test & burst test ( for cylinder body ) certificatefrom oem / external nabl accrediated lab is to be submitted. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 163 4 kg...
42
Medical Health And Family Welfare - Rajasthan
36432910 tender for electrical work in the construction of phc building at basai jogiyan ( thangagazi ) distt. alwar wiring of light point / fan point / exhaust fan point / call bell point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade ( is:694 ) inrecessed isi marked mms ( is:9537 p iii ) virgin material pvc conduit & itsisi marked ( is:3419 1988 ) accessories, round tiles, 1.2 mm thickhot dipped galvanized modular box with earth terminal, 10a modular switch, modular face plate with grid plate, 3 pin ceiling rose / holder / 3 way connector, screws, making connections, testing etc. as required.for specification of copperconductor, phenolic laminated sheets & electrical / wiring accessories refer chapter e 04, e 05 & e 07 for additional technical parameters of product / work refer annexure a attached with this bsr 3 short point ( up to 3 mtr. ) 4 medium point ( up to 6 mtr. ) 5 long point ( up to 10 mtr. ) 6 wiring of twin control light point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade ( is:694 ) in recessed isi markedmms ( is:9537 p iii ) pvc conduit & its isi marked ( is:3419 1988 ) accessories, round tiles, 2 nos hot dipped galvanized m.s modularbox of 1.2 mm thickwith earth terminal, 2 nos10 a two way modular switch, 3 pin ceiling rose / holder / 3 way connector , modular face plate with grid plate, screws, making connections, testing etc. as required.for specification of copperconductor, phenolic laminated sheets & electrical / wiring accessories refer chapter e 04, e 05 & e 07 for additional technical parameters of product / work refer annexure a attached with this bsr 7 medium point ( up to 6 mtr. ) 8 long point ( up to 10 mtr. ) 9 wiring of 3 / 5 pin 6 amp. light plug point with 1.5 sq. mm nominal sizefr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade ( is:694 ) inrecessed isi marked mms ( is:9537 p iii ) pvc conduit & its isi marked ( is:3419 1988 ) accessories, hot dipped galvanizedmodular box of 1.2 mm thick with earth terminal, 10 a modularswitch, 3 / 5 pin 6 a modular socket, modular face plate with grid plate, screws, making connections, testing etc. as required.for specification of copperconductor, phenolic laminated sheets & electrical / wiring accessories refer chapter e 04, e 05 & e 07 for additional technical parameters of product / work refer annexure a attached with this bsr 10 on board 11 s&f following sizes ( dia. ) of isi marked virgin material mms ( is:9537 p iii ) pvc conduit along withisi marked ( is:3419 1988 ) accessories as requiredinrecessincludingcutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure a attached with this bsr 12 20 mm 13 25 mm 14 32 mm 15 supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked ( is:694 ) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from99.90 % purity copper, class 5 stranding in acc. to is:8130 / iec 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation pvc type a / c / d , flame retardant as per is 10810 53, better amperage rating as per is:3961 part 5, in existingsurface or recessed pvc / ms conduit / casing capping making connections with copper lugs of suitable size, ferrules, testing etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of product / work refer annexure a attached with this bsr 16 1 x 1.5 sq.mm 17 3x 1.5 sq.mm 18 2 x 2.5 sq. mm. + 1x1.5sqmm 19 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 20 4 x 10.0 sq.mm 21 4 x 6.0 sq.mm 22 1 x 4.0 sq.mm 23 1 x 2.5 sq.mm 24 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm. 25 supplying and drawing pe insulated & pvc sheathed unarmoured telephone cable with 0.5 mm dia. solid annealed electrolytic grade bare copper conductor as per is: 8130 / 84 &confirming to tec specification gr / wir / 06 03 march 2002in existingsurface or recessed conduit / casing capping. including ferruling on each pair for identification etc. as required. for additional technical parameters of product / work refer annexure a attached with this bsr 26 2 pair 27 p & f in position frame made out of m.s. angle ( riveted or welded ) finished with two coats of red oxide and two coats enamel paint including cutting, welding, holes etc.of following sizes as required.for additional technical parameters of product / work refer annexure a attached with this bsr 28 40mm x 40mm x 5mm 29 p & f paper phenolic resin bondedlaminates confirming to is : 2036 1995 for boxes / frames including making holes for switches etc, with brass screws, washers / zinc platednut and bolts as required. for additional technical parameters of product / work refer annexure a attached with this bsr 30 6.4 mm thick 31 p & f phenolic laminated sheet 2.0 mm thick of following size . including screws, cup washer as required.for additional technical parameters of product / work refer annexure a attached with this bsr 32 75 mm dia 33 providing & fixing of 240 / 415 v ac mcb with positive isolation of 10 ka breaking capacity ( b / c / d tripping characteristic as per type of load andsite requirement ) 4 kv impulse withstand voltage, isi marked is 8828 ( 1996 ) / conforming to iec 60898 1 2002, iec 60947 2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , ip 20 contact protection and fitted inexisting distribution board / sheets, minimum electrical operation 20, 000 upto 20 a rating and 10, 000 upto 63 a, 5000 for 80 a & above ratingincluding making connections, testing etc. as required. oem shall have submitnabl / cpri / erda accrediated lab type test reports& all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure a attached with this bsr 34 single pole mcb ( with b / c curve tripping characteristics ) 35 6 a to 32 a rating 36 double pole mcb ( with b / c curve tripping characteristics ) 37 6 a to 32 a rating 38 four pole mcb ( with b / c curve tripping characteristics ) 39 6 a to 32 a rating 40 50 / 63 a rating 41 providing & fixing of recessed / surface mounting heavy duty horizontal type double door ( metal / glazed ) distribution board with metal end box made out from galvanized steel / crca sheet not less then 1.2 mm thick conforming to is 8623 1 & 3 / iec 61439 1 & 3, powder painted complete with reversible door ( for double door db only ) 100 amp. insulated copper bus bar / shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar, masking sheet, making internal db terminations with copper lugs, ferrules, detachable gland plate, including making connections, testing etc. as required. oem shall have submitnabl / cpri / erda accrediated lab type test reports& all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure a attached with this bsr 42 metal door ( single phase ) ik 09 and ip 43 with metal end box 43 16 way ( 16+2 ) 44 metal door ( three phase ) ik 09 and ip 43with metal end box 45 6 way 46 p&f metal clad / plastic industrial plug top & socket unit with pin and sleeve type contact on porcelain / bakelite base in recessed / surface mounting heavy duty enclosure made out from galvanized steel / crca sheet not less then 1.2 mm thick conforming to is 8623 1 & 3 / iec 61439 1 & 3. powder painted ( without mcb ) including making connections, testing etc.as required.for additional technical parameters of product / work refer annexure a attached with this bsr 47 20 amp, 3 pin + scrapping earth, 4 module 48 p & f of industrial plug and socket conforming to iec 60309 1 / 2 made out of self extinguishing engineering polymer / polyamide, nickel plated brass sleeve and pins, socket with shutter including making connection etc as reqd. for additional technical parameters of product / work refer annexure a attached with this bsr 49 ip 67 panel mounted socket 50 32 a 3 pin ( 2p+e ) 51 providing & fixing of flush typenon modular single line telephone jackmade out fromindustrial grade polycarbonate or fire resistant abs material, including making connection testing etc. as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 52 providing & fixing of ding dong / musical chime bell as per pwd specification for electrical works, including making connection testing etc. as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 53 providing & fixing of modular type 120 w step fan regulator duly isi marked ( is 11037:1984 ) with cm / l no. printedmade out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith ip 20 rating , includingall as per pre approved by engineer in charge, making connections, testing etc. as required.for additional technical parameters of product / work refer annexure a attached with this bsr 54 5 step fan regulator 2 module 360 dgree rotating 55 supplying and fixing of power plug point with modular accessories as per pwd specification for electrical works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal / connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost ofisi marked modular 16 amp. switch ( is :3854 ) and 6 / 16 amp. socket outlet ( is:1293 ) making connection , testing , etc. as required. for specification ofwiring accessories refer chaptere 07related item & for additional technical parameters of product / work refer annexure a attached with this bsr 56 p & f krone module with base framein the recess / surface made out of 1.2 mm thicksheet steel box, front openable, having locking arrangements duly powder painted, including dressing, ferrulingandpunchingof telephone cable with krone tool etc. as required. for additional technical parameters of product / work refer annexure a attached with this bsr 57 10 pairs 58 sitc of ip 42 and general construction confirming to is:8623 : 1993, wall / free standing floor mounted dust and vermin proof compartmentalisedcubical panel as specifications andother parameters requiredas per point ( a ) , ( b ) , ( c ) , ( d ) , ( e ) , ( f ) , ( g ) , ( h ) as below: 59 ( a ) thickness of crca sheet shallbe 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / withoutdetachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided 60 ( b ) complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel.the panel having pe foam / neoprene rubber gasket of not less than 3mm thickness , required hardware , concealed hinged door with key type locking arrangement for equipment / switchgear earthed with 2.5 sq.mm braided copper wire. 61 [ c ) interconnection between bus bar and switchgears / cable shall be rigidly supported and made out by flexible copper wires ( up to 63 amp ) and by solid bus bar ( >63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only.all joints / interconnections of copper bus bar shall be dully tinned . clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar bus bar is insulated by heat shrinkable sleeves . earth and neutral bus bar shall be half of the size of phase bus bar. ( cost of bus bar / flexible wire for interconnection between main busbar and switchgearis to be paid extra ) 62 ( d ) wiring between components within switchgear and incoming / outgoing cableshall be done through the terminal block only. direct connection shall not be permitted. each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. for tap offs, adjacent terminals with shorting strips shall be used. 10% spare terminal blocks shall be provided. wire identification on marking strip shall correspond to the designation of the wiring diagrams. all wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram. 63 ( e ) all wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, wiring between terminals of various devices shall be ‘point to point’ ( no wire splitting or tee connections ) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging. 64 ( f ) floor mounted panel shall be mounted on base frame of ismcchannel size 100 x 50 x 5 mm ( to be paid extra ) 65 ( g ) tests: the insulation resistance ( with 1000 v megger ) and high voltage power frequency test ( by applying a voltage of 2.5kv for one minute ) shall be measured between phases, between phase and neutral and between phase and earth. both before and after high voltage power frequency test. the insulation resistance shall not be less than three megaohm. ct secondary current injection test shall also be carried out. 66 ( h ) only outer surface area on all sides shall be measured & panel to be fabricated only from cpri approved fabricator only ( cpri test certificates to be submitted ) all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 67 supplying and fixing of aluminium ( iec 60105 iso 209 1, 2 ) / copper ( iec 60028 ) bus bar by means of smc / dmc type insulatorwith standard short circuit withstand capacity, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable pvc sleeves. all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 68 electrolytic grade aluminium bus bar 6010 grade 69 providing & fixing of bis approvedcurrent transformeras per pwd specification for electrical works , isi marked as peris 2705 1992 / conforming to iec 60044 1, with secondary terminalof ct shall be brought out suitable to a terminal block which shall be easier accessible for testing and terminal connection , with all necessary support in existing panel including connection etc. as requiredcurrent transformer ring type tape wound / resin cast wound as per is 16227 with, accuracy cl, ct ratio and burden as specified. isf<=5, cu cross section of secondary wire 1.5sqmm ( minimum ) , including all necessary support in existing panel including connection etc. as required . all as per pre approved by engineer in charge.all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 70 ring type tape wound ct 71 c t class 1, ratio 200 / 5 to 300 / 5, burden 10 va 72 providing & fixing of110 / 220 v, unibody led indicatinglamp iec 60947with integral circuit, ip 65 above panel &ip 20 terminal block, approx. body dia for panel not less then 20 mm, length min. 50mm, front led cover dia min.29 mm, contact material phospher bronze for led, pcb contacts shall be ofbrass ( tin plated ) , impulsedielectric tested for 2.5 kv, rated insulation resistance shall be 100 m ohm at 500vdcincluding connection etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 73 red / yellow / green colour 74 providing & fixing of electricalinsulating rubber matts as per pwd specification for electrical works, isi marked confirming to is: 15652 / 2006with one sideanti skid abberation marks and pasting the mat with synthetic rubber adhesive as required. all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 75 3.3 kv, class a 2 mm thick with proof voltage 10 kv ac ( rms ) and break down voltage 30 kv ac ( rms ) 76 sitc of3 / 4pole current limiting moulded case circuit breaker ( mccb ) made of flame retardent & heat resistant materialhaving following current rating, short circuitbreaking capacityat 440 / 415 v, 50 hz; o / l & s / c settings , conforming to is / iec 60947 p 2 :2003 with frontface and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push ( test ) to trip, trip time less then 10 ms under s / c condition, breaking capacity ics = 100% icu. u imp =8 kv, rated insulation voltage690 v.provision for uvr , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connectionsetc. as required.oem shall have submitnabl / cpri / erda accrediated lab type test certificate before execution all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure a attached with this bsr 77 4 pole mccb with thermal magnetic release 78 125 amp , 25 ka, adjustable o / l & adjustable s / c setting, 79 up to 100 amp , 25 ka, adjustable o / l & adjustable s / c setting, 80 providing & fixing of iso certified company made on load change over switch, front handle operated, four pole 415 v as per pwd specificationfor electrical works conforming to is / lec 60947 3 : 1999 including connections , testing etc. as required .in the following rating.appropriate type test certificate / oem test report shall be submitted .all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 81 open execution type 82 160 a 83 providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed arrmouredaluminiumcable confirming to is:1554 p i / is :7098 p i of 1.1 kv withh4 grade electrolyticaluminium conductor confirming to is 8130 of purity >99.6 %, round / flat strip armouring of cables, inner / outer sheath confirming to is:5831in existing rcc / hume / stoneware / pvc pipe / open duct / cable trench / cable tray ( with cable tie ) includingtesting etc. as required of following size. oem must have its own in house nabl accrediated laboratory for testing procedure as per is:10810.for additional technical parameters of product / work refer annexure a attached with this bsr 84 10.0 sq. mm 85 2 core 86 35.0 sq. mm 87 3.5 core 88 supplying and making one end termination with nickel plated heavy duty brass single compression gland ( as per is 12943 1990 ) ) sibg type consisting of check nut, gland body, metal washer ( 3 nos. ) , outer seal rubber ring, compression nut, heavy duty aluminium lugs ( as per is 8309 1993 ) duly crimped with crimping tool, pvc tape as peris 8337 1976offollowing size ofpvc insulated & pvc sheathed / xlpe aluminium conductor cable of 1100 volt grade as required.all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 89 3.5 x 35.0 sq.mm 90 supplying and makingend termination with heavy aluminiumlugs ( pin / ring type ) confirming to is 8309 1993 & is 8337 1976 duly crimped with crimping tool, pvc tape etc of following size.all as per pre approved by engineer in charge. for additional technical parameters of products / work, refer annexure a attached with this bsr . 91 35.0 sq.mm 92 supplyandinstallationofhigh tensile low carbon steel rod molecularly bonded with 99.9 % copperthickness ( 250 microns ) andconfirming toul 467, is / iec 62561 2of following size and length and as per point mentioned ( a ) , ( b ) , [ c ) , ( d ) , ( e ) below : 93 ( a ) bore a hole of dia. 100 mm of required length, place the rod in the centre of hole 94 ( b ) filled with anti corrosiveconductivecompounds with the permanent sealings at both the ends, cpri / erdatested with rms capacity of minimum 30 ka for withstanding 1 second .to ensure the moisture content and electrical conductivity, 25 kg for 2000 mm & 50 kgs for 3000mm of resistance lowering earth enhancement material shall be used as a backfill compound. the compound shall be tested form nabl acredeated labfor lowresistivity ( less than 0.12 ohm meter ) & high conductivity in nature with carbon as a major contentas per referance of is 3043 1987, ieee 80 2013 ( clause 14.5d ) , ieee 837 & ier 1956 with latest amendemnts 95 © connect the rod with copper strip / conductor / wire with suitable clamp made from tinned copper and ss 304 bolt 96 ( d ) place heavy duty weather proof poly propylene earth pit chamber with lockable jam free lid suitable for safe working load 5000 kg or more of size top dia. 225 to 260 mm, bottom dia 300 to 350 mm. and height250 to 300 mm. 97 ( d ) testing of earth resistance for value of 5 ohms or lessas required & must record by engineer in charge during site visit and ensure to enter in measurment book. 98 ( e ) test certificatesfor confirming above standards from oem is mandatory. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 99 17.2 mm thick and 3 mtr. long 100 supply & laying following size earth wire in horizontal or vertical run in ground / surface / recess including riveting, soldering, saddles, making connection with gi / cu purity purity >95%thimble etc. as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 101 8 swg copper wire 102 8 swg g.i. ( hot dipped ) wire 103 making of hole in wall ( brick / stone ) of required and placing np 2 rcc pipe ring of required size for housing exhaust fan and making good the same, with cement plaster required of following size. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 104 up to 457 mm size 105 providing & fixing ofbeestar rated copper wounded double ball bearing capacitor start, aluminium body & metallicblade ceilingfanconforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing ( i.e. isi marking ) with down rod up to 80 cm with secondary support safety cable ( steel rope ) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 106 1200 mm sweep bee 2 star rated ( service value >=4.5 to < 5 ) 107 1200 mm sweep bee 3 star rated ( service value >=5.0 to< 5.5 ) 108 p & f 1.2mm thickm.s. recessed fan box, hexagonal / round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mmlength extended on each side . all as per pre approved by engineer in charge.for additional technical parameters of product / work refer annexure a attached with this bsr 109 p & f 1.2mm thickm.s. recessed fan box, hexagonal / round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mmlength extended on each side . all as per pre approved by engineer in charge.for additional technical parameters of product / work refer annexure a attached with this bsr 110 providing & fixing ofof double ball bearing, copper wounded capacitor startsingle phase metallicblade fresh air fan, in existing opening including cost of hardware , flexible 3 core copper conductor , making connections, testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 111 225 mm sweep 112 providing & fixing of heavy duty capacitor start, copper wounddouble ball bearing900 / 1400 rpm single phaseexhaustfan conforming to is:2312 isi marked in existing opening including making connections testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 113 300 mm sweep ( 900 / 1400 rpm ) 114 providing & fixing of wall mounting / pedestal type heavy duty air circulator , double ball bearing and with metal sturdy mesh guard; aluminium alloy one piece blade and conforming to is:2997, including fixing with anchor bolts, making connection testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 115 450 mm sweep wall mounting and three speed regulator with minimum air delivery 150 cum. / minute 116 p & f of gravity louver shutter of superior quality made out of frame of18 swg m.s. sheet & louvers made from 24 swg ms sheetwith enamel paint including cost of nuts, bolts, etc as reqd.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 117 up to 380 mm size 118 providing & fixing of vertical ( bee 5 star rated ) / horizontal ( bee 3 star rated ) storage water heater with outer casing made of engineering plastic sheet ( upto 25 ltr ) / metal rust proof body ( 35 & 50 ltr ) , glass line / titanium enamel coated pressure pump compatible 8 bar pressure inner tank, glass line coated , mineral filled heating element, stem type, snap actionadjustable thermostat , dual indicating lampsinjected puf insulation, multi function valve etc. as required held in position with 2 / 4 no. 10 / 12 mm anchor fastener, duly wired with 3 core 2.5 / 4.0 sqmm pvc insulated & sheathed copper conductor and 16 a / 25a three pin plug top with portable residual current device ( prcd ) , including making inlet, outlet flexible alloyconnection, testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 119 15 ltr. 120 sitc ofmnre approved & confirming to is:12933 p 1, 2, 3 & 5 flat plate collector type solar hot water system havingcollector withzincalum sheet outer body , glass line / titanium enamel coated inner tank with metal rust proof puf insulated body includingelectrical back up, thermostat, powder coated / hot dipped galvanized ms standfor collector & tank etc. as required. of following capacity complete in all respect. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 121 200 litre / day 122 providing & fixing of energy efficient direct fit ( retrofit ) polycarbonate / glasshousingsmd mid power led tube rod ( with integral driver & alumn. heat sink ) , on existing fixture.system lumen efficacy = 100 lm / watt output, internal surge protection of 2.5 kv , thd < 20% , p.f.=0.95, cri >80 , life time of minimum35000 burning hours with , 70% of intial lumen maintaned till life ends, cct 3000°k / 4000°k / 5700°k / 6000°k / 6500°k ( as per ansi bin ) , maximum power consumption should not more than the specified rating and fixture shall be ofbis standard andtrade mark certificate ( t.c. ) . manufactures word mark / name engraved / embossing / screen printing onhousing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. ( lm79 & lm80 ) certificate / report from oem shall be submitted.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 123 1200mm , min. lumens output 2000 lmled tube rod with polycarbonate housing 124 providing & fixing of ip 20 led recessed / surface mounted, round / sqauresmd mid power led downlight with power coated die cast aluminum housingwith uv stabilized non yellowish diffuser withbis complience 2.5 kv surge protected isolated driver, with short & open circuit protection, having efficiency > 85% . system lumen efficacy of = 110 lm / watt, thd < 10 % , pf.=0.95, cri >80, life time of minimum50000 burning hours with , 70% of intial lumen maintaned till life ends, cct 3000°k / 4000°k / 5700°k / 6000°k / 6500°k ( as per ansi bin ) , maximum power consumption should not more than the specified rating and fixture shall be ofbis standard andtrade mark certificate ( t.c. ) . manufactures word mark / name engraved / embossing / screen printing onhousing. 125 oem must have its own in house nabl lab setup for all testing facilities for led fixtures. ( lm79 & lm80 ) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 126 surface mounting ( with extruded alumn. housing ) 127 minimum lumen output 1950 lm 128 providing & fixing of ip20, 2x2 led surface / recessedmounting mid power smd type led light fixture not less than 50mm housing depth made from crca sheet steel housing, high purity / transmisivity uv stabilized non yellowish diffuser for uniform light distribution. high efficiency with 4 kv internal / external surge protection bis certified isolated driver having efficiency > 85% , with short & open circuit protection ( integral with light fixture ) . system lumen efficacy of = 120 lm / watt , thd < 10 % , p.f.=0.95, cri >80 , life time of minimum50000 burning hours with , 70% of intial lumen maintaned till life ends, cct 3000°k / 4000°k / 5700°k / 6000°k / 6500°k ( as per ansi bin ) , maximum power consumption should not more than the specified rating and fixture shall be ofbis standard andtrade mark certificate ( t.c. ) . manufactures word mark / name engraved / embossing / screen printing onhousing. 129 oem must have its own in house nabl lab setup for all testing facilities for led fixtures. ( lm79 & lm80 ) certificate / report from oem shall be submitted.all as per pre approved by engineer in charge. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 130 recessed mounting 131 minimum lumen output 4200 lm 132 providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket / pole. fixture made of powder coated single piece pressure die cast aluminummaterial with heat dissipation fins on housing with uv stabilized pc ( uv stablization report submitted for uv cover ) / toughened glass coverand secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm / wt and potted driver& has a unique bis r number withinput voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driverefficiency >85%, thd ( i ) <10%humidity 10% to 90% rh working temp 5c to 45c .driver current <750ma. the luminaireshall be bis certified and trade mark certified. life expectancyequal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min = 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs.manufactures word mark / name engraved / embossing on die cast housing to allow traceability / authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities forled fixtures. ( lm79 / lm80 ) certificate / report with liable warranty of product / accessories from oem shall be submitted. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 133 led street light fixture with minimum lumen output 2450 lm 134 providing & fixing of street light bracket made out from following size of b class , medium class g.i. pipe confirming to is : 1239 p 1 ( 2004 ) with heavy duty pole clamp, saddles suitable fastners etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 135 25 mm dia. 136 supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp ( unshielded twisted pair ) , category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi / tia / eia 568 , the copper conductors should be balanced twisted in pairs, seperated by a cross member fluted pair divider & protected bypvc jacket. certified performance in a 4 connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms / pvc conduits / casing capping including making connections to information outlets and patch panels with jack &ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 137 supply and installation of unsheilded / 360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6 / 6a application complying to latest ammendments, according. to cat. 6 / 6a channel, it should support channel as well as components requirements of cat.6 / 6a standards at frequencies of up to 250 to 500 mhz. cat 6 / 6a unshielded / shielded jack should be suitable to terminate 4 pair, 23 / 24 awg solid / stranded wire diameters, using 100 ohm unshielded / shielded balance twisted pair cable, the jack should have tooless / impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603 7 4 and complied with ansi / tia / eia 568 c.2 standard. jack should be rj11, rj12 & rj45 compatible. should support ethernet 1.2 gb / s atm, digital video and broadband / baseband analog video, voice over internet protocal ( voip ) specifications in existing modular / ms boxes along with necessory connections as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 138 cat 6, un sheilded information outlet 139 supply & fixing of square faceplate for flush / surface mount information outlets single / dual or quad aperture , material should bepc+abs body, suitable for rj45 unshielded / shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 140 single aperture 141 supply , installation and testing of 4 pair, 100 ohm impedance, cat 6 / 6a / class e / ea patch cords should be constructed of minimum 23 / 24 awg, stranded bare copper cable with frpvc / lszh jacket, with an enhanced performance by factory moulded rj45 connectors with strain relief boots as per ansi / tia / eia 568 c.2 suitable for cat 6 / 6a application complying to latest ammendments category 6 / 6a standards, according. to tia568c.2, iso / iec 11801, en 50173, iec 60603 7 51, en 60603 7, ieee 802.3an minimum requirement for 1g base t to 10g base t performance. patch cords shall be straight thru cable compatible with both t568 a and t568 b wiring schemes, should support ieee 802.3af / ieee 802.3at for poe applications, minimum 750 to 1000 mating cycles in plug contacts for long durability, should support ethernet 10gbase t, 1.2 gb / s atm, token ring 4 / 16, digital video and broadband / baseband analog video, voice over internet protocal ( voip ) .all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 142 cat 6, u / utp ( unscreened / un sheilded twisted pair ) patch cord 143 1 mtr 144 supply, installation, & testing of 19 1u rack mounted / surface mounted aluminum / crca 1.2mm powder coated, multimode glass fiber optic cable patch panel / liu loaded with flangless / screwable adapters for st / e 2000 / sc / lc / mt rj / pc type, it should have easy removable top plate with push buttons, there should be a splice tray installed in the patch panel / liu which can handle the fiber cores, splice tray should be pc+abs material, it should include accessories like mounting hardware, gormetts, heat shrink tubes / sleevs, screws, nuts to install the panel for rack / wallmount applications as per requirement complete in all respect. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 145 multi mode liu 12 ports 146 supply & installation of ip 20 & ik 08 , ul listedwall mounted double section communication enclosure ( rack ) made from powder coated ( 60 to 80 micron ) crca sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door, vertical mounting rail 1.6 mm with umarking , with all round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19 angles with wall mounting provision on wall. accessories like: 1 no of 19 1u horizontal cable manager, 1 no of 90 cfm 230v ac fan with 1 mts long cable, mounting hardware , 1 no of 19 1u, mountable socket strips with 5 nos of 5a universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with suitable anchor fastneretc as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 147 6 u rack with width 600 mm &depth 400 mm + 100 mm 148 supply , installation, testing and comissioning ofmanaged layer 2 intelligent 10 / 100 ethernet switch providing 24 x 10 / 100 / 1000 mbps giga ethernet ports / with min 2 sfp giga ports ( provision for fiber giga connectivity ) with related lan base software including making connections etc as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 149 sitc of single stage, water cooled, high speed ( 2880 rpm ) , horizontal, centrifugal, openwell submersible pumps set pre filled with coolent water and fitted with mechanical seal t / c vs t / c, thrust bearing shall be ofcarbon + s.s.the stator body of single phase pumpshall be of ss and rest of all shall be of cast iron. all casting parts should be cathod electro deposition ( ced ) coated and other construction material should be confirming to is : 14220: 2018 . the overall performance of pump shall confirm to bee energy efficiency level of 3 star. valid bee certificate from oem must be submitted for the same. motor should be ie2 class as per iec 60034 2 1: 2007, iec 60034 30: 2008, & is12615:2011, including making connection etc as required complete in all respect. oem shall have submitnabl / cpri / erda accrediatedlab type test certificate before execution. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 150 1.0 hp, 1 ø, ( 7 12 ) mtr, ( 405 240 ) lpm 151 sitc of monoblock motor pump set isi marked ( is:9079 2002 ) with tefc motor, motor should be ie2 class as per iec 60034 2 1: 2007, iec 60034 30: 2008, & is12615:2011. with stainless steel impellor, stainless steel shaft, mechanical seal, single / three phase ( 240 440 v ) permanent split capacitor type ( psc ) , fitted with thermal overload protection, including cost of hardware etc on existing platform complete. pump shall have following hp rating, phase, head, minimum discharge respectively complete in all respect. oem shall have submitnabl / cpri / erda accrediatedlab type test certificate before execution. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 152 1.0 hp, 1 ø, ( 10 120 ) mtr, ( 30 12 ) lpm 153 supply , installation, testing and comissioning ofinverter type air cooled hi wall split type air conditioners with latest star rating system as per bee amended upto date complete with indoor unit ( idu ) , out door unit ( odu ) , surface / concealed copper refrigerant piping with insulation ( closed cell elastomeric nitrile rubber tubular pipe section ) upto 3 mtr ( idu to odu ) , copper power cable upto 3.5 mtr ( idu to odu ) , r 32 / r 410 green refrigerant, wireless remote control, suitable for working between 230v + / 10% with low & high voltage cutoff and50 hz , single phaseacsupply capable of performing cooling, dehumidification, air circulation of following capacity with scroll / rotary compressor. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 154 1.5 tr iseer not less then 3.8 155 providing & fixing of is : 4985 2000 class 4 ( 10 kgf / sqcm ) upvc drain water piping withfittings ( is:7834 & 10kgf / sqcm ) like elbow, socket, tee, solvent cement jointing, support with ms hanger on ceiling or recessed in wallwith chasing & plastering with 6 mmthickclosedcellelastomeric nitrile rubberinsulation including leakage testing etc. as required of following nominal sizes. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 156 25 mm 157 supply, fixing and testing of following capacity iso certified company made wall mounted stabilizer having output voltage variation from 200 v to 250 v ( + / 5% ) with input voltage variation from 170 v to 260 v, time delay facility from 2 to 4 minute and high cutoff at 270 v with providing of 16 amp / 20 amp industrialplug top making connection etc complete in all respect.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 158 4 kva 159 making hole in stone masonary / rcc wall / rcc slab with core cutter for accomodating refrigerant pipe / drain pipe / ms pipe / cables etc of following dia 160 150 mm dia per running inch length 161 supply & fixing ms powder coated stand suitable for 1.0 / 1.5 / 2.0 tr outdoor type of split ac.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 162 supply & fixing of dry powder agent ( as per is 4308:2019 ) , abc typefire extinguisher ( stored pressure type ) conforming to is:15683:2018 , powder coated internal & external surface deep drawn cylinder body of mild steel cr2 grade conforming to is: 513, squeeze grip forged brass release valve with inbuilt safety release device, diaphragm type, 0 to 28 bar range pressure gauge, 450 mm long epdm discharge tube, qr code for product traceability including fixing on wall with suitable anchor fasteners as required of following capacity. test certificates of all the parameters along with hydro test & burst test ( for cylinder body ) certificatefrom oem / external nabl accrediated lab is to be submitted. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr ....
43
Public Works Department - Rajasthan
36408724 tender for electrical work in govt. srg hospital jhalawar wiring of light point / fan point / exhaust fan point / call bell point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade ( is:694 ) on surface isi marked ( is:14927 p ii ) virgin materialupvc trunking & its accessories, hot dipped galvanizedmodular box of 1.2 mm thickwith earth terminal / surface moulded virgin materialupvcmodular box , 10 a modular switch, modular faceplate with grid plate, 3 pin ceiling rose / holder / 3 way connector, screws, making connections, testing etc. as required. for specification of copperconductor, phenolic laminated sheets & electrical / wiring accessories refer chapter e 04, e 05 & e 07 for additional technical parameters of product / work refer annexure a attached with this bsr 2 short point ( up to 3 mtr. ) 3 medium point ( up to 6 mtr. ) 4 long point ( up to 10 mtr. ) 5 wiring of twin control light point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade ( is:694 ) of approved make on surfaceisi marked ( is:14927 p ii ) virgin materialupvc trunking & its accessories, hot dipped galvanizedmodular box of 1.2 mm thickwith earth terminal / surface 2 no. moulded virgin materialupvcmodular box , 2 nos 10 a two way modular switch, 3 pin ceiling rose / holder / 3 way connector , modular face plate with grid plate, screws, making connections, testing etc. as required.for specification of copperconductor, phenolic laminated sheets & electrical / wiring accessories refer chapter e 04, e 05 & e 07 for additional technical parameters of product / work refer annexure a attached with this bsr 6 medium point ( up to 6 mtr. ) 7 long point ( up to 10 mtr.. ) 8 wiring of 3 / 5 pin 6 amp. light plug point with 1.5 sq. mm nominal sizefr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade ( is:694 ) on surfaceisi marked ( is:14927 p ii ) virgin materialupvc trunking & its accessories, hot dipped galvanizedmodular box of 1.2 mm thickwith earth terminal / surface moulded virgin materialupvcmodular box, modular 10a switch, 3 / 5 pin6 amodular socket, modular face plate with grid plate, screws, making connections, testing etc. as required.for specification of copperconductor, phenolic laminated sheets & electrical / wiring accessories refer chapter e 04, e 05 & e 07 for additional technical parameters of product / work refer annexure a attached with this bsr 9 on board 10 s&f following sizesof isi marked ( is:14927 p ii ) virgin materialupvc trunking along with accessorieslike coupler, inner, outer, elbow, square box, tee, end cap etc. on surfacewithscrews, expansionfastenersas required. for additional technical parameters of product / work refer annexure a attached with this bsr 11 25 mm x 12 mm 12 supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked ( is:694 ) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from99.90 % purity copper, class 5 stranding in acc. to is:8130 / iec 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation pvc type a / c / d , flame retardant as per is 10810 53, better amperage rating as per is:3961 part 5, in existingsurface or recessed pvc / ms conduit / casing capping making connections with copper lugs of suitable size, ferrules, testing etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of product / work refer annexure a attached with this bsr 13 2 x 2.5 sq. mm. + 1x1.5sqmm 14 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 15 p & f paper phenolic resin bondedlaminates confirming to is : 2036 1995 for boxes / frames including making holes for switches etc, with brass screws, washers / zinc platednut and bolts as required. for additional technical parameters of product / work refer annexure a attached with this bsr 16 3.0 mm thick 17 providing & fixing of 240 / 415 v ac mcb with positive isolation of 10 ka breaking capacity ( b / c / d tripping characteristic as per type of load andsite requirement ) 4 kv impulse withstand voltage, isi marked is 8828 ( 1996 ) / conforming to iec 60898 1 2002, iec 60947 2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , ip 20 contact protection and fitted inexisting distribution board / sheets, minimum electrical operation 20, 000 upto 20 a rating and 10, 000 upto 63 a, 5000 for 80 a & above ratingincluding making connections, testing etc. as required. oem shall have submitnabl / cpri / erda accrediated lab type test reports& all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure a attached with this bsr 18 single pole mcb ( with b / c curve tripping characteristics ) 19 6 a to 32 a rating 20 double pole mcb ( with b / c curve tripping characteristics ) 21 40 a rating 22 four pole mcb ( with b / c curve tripping characteristics ) 23 50 / 63 a rating 24 providing & fixing of recessed / surface mounting heavy duty horizontal type double door ( metal / glazed ) distribution board with metal end box made out from galvanized steel / crca sheet not less then 1.2 mm thick conforming to is 8623 1 & 3 / iec 61439 1 & 3, powder painted complete with reversible door ( for double door db only ) 100 amp. insulated copper bus bar / shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar, masking sheet, making internal db terminations with copper lugs, ferrules, detachable gland plate, including making connections, testing etc. as required. oem shall have submitnabl / cpri / erda accrediated lab type test reports& all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure a attached with this bsr 25 metal door ( single phase ) ik 09 and ip 43 with metal end box 26 4 way ( 4+2 ) 27 p & f isi marked ( is:3854 ) 6 amp. flush type non modular switchwith cm / l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 28 p & f isi marked ( is :3854 ) 16 amp. flush type non modular switch cm / l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 29 providing & fixing ofof 3 / 5 pin 6 amp. flush typenon modular socketmade out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 30 providing & fixing of3 / 6 pin 16 amp flush type non modular socketmade out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 31 sitc of3 / 4pole current limiting moulded case circuit breaker ( mccb ) made of flame retardent & heat resistant materialhaving following current rating, short circuitbreaking capacityat 440 / 415 v, 50 hz; o / l & s / c settings , conforming to is / iec 60947 p 2 :2003 with frontface and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push ( test ) to trip, trip time less then 10 ms under s / c condition, breaking capacity ics = 100% icu. u imp =8 kv, rated insulation voltage690 v.provision for uvr , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connectionsetc. as required.oem shall have submitnabl / cpri / erda accrediated lab type test certificate before execution all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure a attached with this bsr 32 4 pole mccb with thermal magnetic release 33 160 amp , 25 ka, adjustable o / l & adjustable s / c setting, 34 providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed arrmouredaluminiumcable confirming to is:1554 p i / is :7098 p i of 1.1 kv withh4 grade electrolyticaluminium conductor confirming to is 8130 of purity >99.6 %, round / flat strip armouring of cables, inner / outer sheath confirming to is:5831in existing rcc / hume / stoneware / pvc pipe / open duct / cable trench / cable tray ( with cable tie ) includingtesting etc. as required of following size. oem must have its own in house nabl accrediated laboratory for testing procedure as per is:10810.for additional technical parameters of product / work refer annexure a attached with this bsr 35 10.0 sq. mm 36 2 core 37 making of hole in wall ( brick / stone ) of required and placing np 2 rcc pipe ring of required size for housing exhaust fan and making good the same, with cement plaster required of following size. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 38 up to 457 mm size 39 providing & fixing of heavy duty capacitor start, copper wounddouble ball bearing900 / 1400 rpm single phaseexhaustfan conforming to is:2312 isi marked in existing opening including making connections testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 40 300 mm sweep ( 900 / 1400 rpm ) 41 380 mm sweep ( 900 / 1400 rpm ) 42 p & f of gravity louver shutter of superior quality made out of frame of18 swg m.s. sheet & louvers made from 24 swg ms sheetwith enamel paint including cost of nuts, bolts, etc as reqd.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 43 up to 380 mm size 44 providing & fixing of ip20 smd mid power led batten type integrated light fixture made from powder coated extruded aluminiumhousing with in built driver, system lumen efficacy = 110 lm / watt output, internal surge protection of 2.5 kv with short & open circuit protection , thd < 10% , p. f.=0.95, cri >80 , life time of minimum50000 burning hours with , 70% of intial lumen maintaned till life ends, cct 3000°k / 4000°k / 5700°k / 6000°k / 6500°k ( as per ansi bin ) , maximum power consumption should not more than the specified rating and fixture shall be ofbis standard andtrade mark certificate ( t.c. ) . manufactures word mark / name engraved / embossing / screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. ( lm79 & lm80 ) certificate / report from oem shall be submitted.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 45 1170mm ( + / 10% ) led batten with min. lumen output 2200 lm 46 providing & fixing of ip 20 led recessed / surface mounted, round / sqauresmd mid power led downlight with power coated die cast aluminum housingwith uv stabilized non yellowish diffuser withbis complience 2.5 kv surge protected isolated driver, with short & open circuit protection, having efficiency > 85% . system lumen efficacy of = 110 lm / watt, thd < 10 % , pf.=0.95, cri >80, life time of minimum50000 burning hours with , 70% of intial lumen maintaned till life ends, cct 3000°k / 4000°k / 5700°k / 6000°k / 6500°k ( as per ansi bin ) , maximum power consumption should not more than the specified rating and fixture shall be ofbis standard andtrade mark certificate ( t.c. ) . manufactures word mark / name engraved / embossing / screen printing onhousing. 47 oem must have its own in house nabl lab setup for all testing facilities for led fixtures. ( lm79 & lm80 ) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 48 recessed mounting 49 minimum lumen output 1300 lm 50 providing & fixing ofbeestar rated copper wounded double ball bearing capacitor start, aluminium body & metallicblade ceilingfanconforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing ( i.e. isi marking ) with down rod up to 80 cm with secondary support safety cable ( steel rope ) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 51 1200 mm sweep bee 1 star rated ( service value >=4.0 to < 4.5 ) 52 providing & fixing of wall mounting / pedestal type heavy duty air circulator , double ball bearing and with metal sturdy mesh guard; aluminium alloy one piece blade and conforming to is:2997, including fixing with anchor bolts, making connection testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 53 600 mm sweep wall mountingwith minimum air delivery 270 cum. / minute...
44
Public Works Department - Rajasthan
36407422 tender for electrical work in govt. janana hospital jhalawar wiring of light point / fan point / exhaust fan point / call bell point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade ( is:694 ) on surface isi marked ( is:14927 p ii ) virgin materialupvc trunking & its accessories, hot dipped galvanizedmodular box of 1.2 mm thickwith earth terminal / surface moulded virgin materialupvcmodular box , 10 a modular switch, modular faceplate with grid plate, 3 pin ceiling rose / holder / 3 way connector, screws, making connections, testing etc. as required. for specification of copperconductor, phenolic laminated sheets & electrical / wiring accessories refer chapter e 04, e 05 & e 07 for additional technical parameters of product / work refer annexure a attached with this bsr 2 short point ( up to 3 mtr. ) 3 medium point ( up to 6 mtr. ) 4 long point ( up to 10 mtr. ) 5 wiring of twin control light point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade ( is:694 ) of approved make on surfaceisi marked ( is:14927 p ii ) virgin materialupvc trunking & its accessories, hot dipped galvanizedmodular box of 1.2 mm thickwith earth terminal / surface 2 no. moulded virgin materialupvcmodular box , 2 nos 10 a two way modular switch, 3 pin ceiling rose / holder / 3 way connector , modular face plate with grid plate, screws, making connections, testing etc. as required.for specification of copperconductor, phenolic laminated sheets & electrical / wiring accessories refer chapter e 04, e 05 & e 07 for additional technical parameters of product / work refer annexure a attached with this bsr 6 medium point ( up to 6 mtr. ) 7 long point ( up to 10 mtr.. ) 8 wiring of 3 / 5 pin 6 amp. light plug point with 1.5 sq. mm nominal sizefr pvc insulated unsheathed flexible copper conductor 1.1 kv gradeand 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade ( is:694 ) on surfaceisi marked ( is:14927 p ii ) virgin materialupvc trunking & its accessories, hot dipped galvanizedmodular box of 1.2 mm thickwith earth terminal / surface moulded virgin materialupvcmodular box, modular 10a switch, 3 / 5 pin6 amodular socket, modular face plate with grid plate, screws, making connections, testing etc. as required.for specification of copperconductor, phenolic laminated sheets & electrical / wiring accessories refer chapter e 04, e 05 & e 07 for additional technical parameters of product / work refer annexure a attached with this bsr 9 on board 10 s&f following sizesof isi marked ( is:14927 p ii ) virgin materialupvc trunking along with accessorieslike coupler, inner, outer, elbow, square box, tee, end cap etc. on surfacewithscrews, expansionfastenersas required. for additional technical parameters of product / work refer annexure a attached with this bsr 11 25 mm x 12 mm 12 supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked ( is:694 ) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from99.90 % purity copper, class 5 stranding in acc. to is:8130 / iec 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation pvc type a / c / d , flame retardant as per is 10810 53, better amperage rating as per is:3961 part 5, in existingsurface or recessed pvc / ms conduit / casing capping making connections with copper lugs of suitable size, ferrules, testing etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of product / work refer annexure a attached with this bsr 13 2 x 2.5 sq. mm. + 1x1.5sqmm 14 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 15 p & f paper phenolic resin bondedlaminates confirming to is : 2036 1995 for boxes / frames including making holes for switches etc, with brass screws, washers / zinc platednut and bolts as required. for additional technical parameters of product / work refer annexure a attached with this bsr 16 3.0 mm thick 17 providing & fixing of 240 / 415 v ac mcb with positive isolation of 10 ka breaking capacity ( b / c / d tripping characteristic as per type of load andsite requirement ) 4 kv impulse withstand voltage, isi marked is 8828 ( 1996 ) / conforming to iec 60898 1 2002, iec 60947 2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , ip 20 contact protection and fitted inexisting distribution board / sheets, minimum electrical operation 20, 000 upto 20 a rating and 10, 000 upto 63 a, 5000 for 80 a & above ratingincluding making connections, testing etc. as required. oem shall have submitnabl / cpri / erda accrediated lab type test reports& all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure a attached with this bsr 18 single pole mcb ( with b / c curve tripping characteristics ) 19 6 a to 32 a rating 20 double pole mcb ( with b / c curve tripping characteristics ) 21 40 a rating 22 four pole mcb ( with b / c curve tripping characteristics ) 23 50 / 63 a rating 24 providing & fixing of recessed / surface mounting heavy duty horizontal type double door ( metal / glazed ) distribution board with metal end box made out from galvanized steel / crca sheet not less then 1.2 mm thick conforming to is 8623 1 & 3 / iec 61439 1 & 3, powder painted complete with reversible door ( for double door db only ) 100 amp. insulated copper bus bar / shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar, masking sheet, making internal db terminations with copper lugs, ferrules, detachable gland plate, including making connections, testing etc. as required. oem shall have submitnabl / cpri / erda accrediated lab type test reports& all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure a attached with this bsr 25 metal door ( single phase ) ik 09 and ip 43 with metal end box 26 4 way ( 4+2 ) 27 p & f isi marked ( is:3854 ) 6 amp. flush type non modular switchwith cm / l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 28 p & f isi marked ( is :3854 ) 16 amp. flush type non modular switch cm / l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 29 providing & fixing ofof 3 / 5 pin 6 amp. flush typenon modular socketmade out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 30 providing & fixing of3 / 6 pin 16 amp flush type non modular socketmade out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 31 sitc of3 / 4pole current limiting moulded case circuit breaker ( mccb ) made of flame retardent & heat resistant materialhaving following current rating, short circuitbreaking capacityat 440 / 415 v, 50 hz; o / l & s / c settings , conforming to is / iec 60947 p 2 :2003 with frontface and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push ( test ) to trip, trip time less then 10 ms under s / c condition, breaking capacity ics = 100% icu. u imp =8 kv, rated insulation voltage690 v.provision for uvr , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connectionsetc. as required.oem shall have submitnabl / cpri / erda accrediated lab type test certificate before execution all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure a attached with this bsr 32 4 pole mccb with thermal magnetic release 33 125 amp , 25 ka, adjustable o / l & adjustable s / c setting, 34 providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed arrmouredaluminiumcable confirming to is:1554 p i / is :7098 p i of 1.1 kv withh4 grade electrolyticaluminium conductor confirming to is 8130 of purity >99.6 %, round / flat strip armouring of cables, inner / outer sheath confirming to is:5831in existing rcc / hume / stoneware / pvc pipe / open duct / cable trench / cable tray ( with cable tie ) includingtesting etc. as required of following size. oem must have its own in house nabl accrediated laboratory for testing procedure as per is:10810.for additional technical parameters of product / work refer annexure a attached with this bsr 35 10.0 sq. mm 36 2 core 37 making of hole in wall ( brick / stone ) of required and placing np 2 rcc pipe ring of required size for housing exhaust fan and making good the same, with cement plaster required of following size. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 38 up to 457 mm size 39 providing & fixing of heavy duty capacitor start, copper wounddouble ball bearing900 / 1400 rpm single phaseexhaustfan conforming to is:2312 isi marked in existing opening including making connections testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 40 300 mm sweep ( 900 / 1400 rpm ) 41 380 mm sweep ( 900 / 1400 rpm ) 42 p & f of gravity louver shutter of superior quality made out of frame of18 swg m.s. sheet & louvers made from 24 swg ms sheetwith enamel paint including cost of nuts, bolts, etc as reqd.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 43 up to 380 mm size 44 providing & fixing of ip20 smd mid power led batten type integrated light fixture made from powder coated extruded aluminiumhousing with in built driver, system lumen efficacy = 110 lm / watt output, internal surge protection of 2.5 kv with short & open circuit protection , thd < 10% , p. f.=0.95, cri >80 , life time of minimum50000 burning hours with , 70% of intial lumen maintaned till life ends, cct 3000°k / 4000°k / 5700°k / 6000°k / 6500°k ( as per ansi bin ) , maximum power consumption should not more than the specified rating and fixture shall be ofbis standard andtrade mark certificate ( t.c. ) . manufactures word mark / name engraved / embossing / screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. ( lm79 & lm80 ) certificate / report from oem shall be submitted.all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 45 1170mm ( + / 10% ) led batten with min. lumen output 2200 lm 46 providing & fixing of ip 20 led recessed / surface mounted, round / sqauresmd mid power led downlight with power coated die cast aluminum housingwith uv stabilized non yellowish diffuser withbis complience 2.5 kv surge protected isolated driver, with short & open circuit protection, having efficiency > 85% . system lumen efficacy of = 110 lm / watt, thd < 10 % , pf.=0.95, cri >80, life time of minimum50000 burning hours with , 70% of intial lumen maintaned till life ends, cct 3000°k / 4000°k / 5700°k / 6000°k / 6500°k ( as per ansi bin ) , maximum power consumption should not more than the specified rating and fixture shall be ofbis standard andtrade mark certificate ( t.c. ) . manufactures word mark / name engraved / embossing / screen printing onhousing. 47 oem must have its own in house nabl lab setup for all testing facilities for led fixtures. ( lm79 & lm80 ) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 48 recessed mounting 49 minimum lumen output 1300 lm 50 providing & fixing ofbeestar rated copper wounded double ball bearing capacitor start, aluminium body & metallicblade ceilingfanconforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing ( i.e. isi marking ) with down rod up to 80 cm with secondary support safety cable ( steel rope ) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 51 1200 mm sweep bee 1 star rated ( service value >=4.0 to < 4.5 ) 52 providing & fixing of wall mounting / pedestal type heavy duty air circulator , double ball bearing and with metal sturdy mesh guard; aluminium alloy one piece blade and conforming to is:2997, including fixing with anchor bolts, making connection testing etc. as required. all as per pre approved by engineer in charge.for additional technical parameters of products / work, refer annexure a attached with this bsr . 53 600 mm sweep wall mountingwith minimum air delivery 270 cum. / minute...
45
Department Of Atomic Energy - Rajasthan
36307568 bids are invited for wrought aluminium and aluminium alloys sheet and strip (general engineering purposes) is:737 (q3) mse total quantity : 70...
46
RAJASTHAN COUNCIL OF SCHOOL EDUCATION - Rajasthan
36306257 supply of vocational lab equipment trade health care ambu mask ( adult ) 1600ml. selfinflating double ended silicone bag with mounts incorporating reservoir valve and side feed oxygen inlet. 2 aed trainer with adult pad vermed physiocontrol multifunctiondefibrillator 3 stop watch royals digital stopwatch timer 4 oxygen cylinder portable oxygen cylinder ( 10 l, 150 breaths ) 5 oxygen key for in gas cylinder 6 oxygen cylinder trolley suitable for 20 litre size gas cylinder 7 hospital bed single function bed in which head end of the patient can be raised with a handle length: at least 2000 mm , breadth at least 900mm & height at least 500 mm 8 bedside locker • 760mm l x 360mm w x 750 mm h • square & rectangular tube frame • ss top • trolley mounted on 50 mmdia wheels• pretreated& powder coated made of square / rectangular tube frameas well as stainless steel top and trolley mounted famish on 50 mmdia wheels isi / ce certification 9 cardiac table over bed table ( cardiac table ) table top height adjustable • frame: tubular mild steel. • finishing: epoxy powdercoated, chrome plated adjustable 10 mattress alternating pressure mattress system with adjustable pump the otica alternating pressure mattress was designed specifically to provide relief from bed sores and ulcers caused from prolonged bedrest. 11 bed sheet, pillow, pillow cover made from cotton. size approx. : 145 x225 cm. 12 blanket pure woollen hosiery blanket single bed 13 wheel chair nylon upholstery • fulllength arms padded • carry straps on seat allow for ease of folding and lifting • footrest • fold down back• light weight 14 walker standard oem product 15 crutch standard oem product 16 table ( 3 ft by 6 ft ) made of wooden 17 cupboard steel cupboard for storage 18 stretcher should be light, safe and reliable, made of aluminium 1alloy and hold for the same, easy to lock and unlock featuresproduct dimensions: 192 x 43 x 8cm net weight: 9kg stretcher bearing: 120kg 19 cane 360 degree antislip pivoting base provides easy walk on all terrain. the support weight is up to 100 kg, 5 levels adjustable height from 34 inch to 39 inch in 1 inch increment.this walking stick provides additional support for people with arthritic / painful hands when walking indoors and outdoors. 20 back rest • angle adjustable • foldable for easy storage 21 foot rest overall approx. step size: 505l x 305w x 230h mm. 800 • frame made of 1 x 18g crc tubes fitted with pvc stumps. • pretreated& epoxy powder coated. 22 steel basin ( large ) stainless steel kitchen sink ( 16 x 18 x 8 inches, silver ) 23 bed pan standard product 24 urinal ( male ) standard product 25 urinal ( female ) standard product 26 air cushion standard oem product 27 sand bag standard oem product 28 weighing machine standard oem with isi / ce certification 29 steel tray ( large ) standard product 30 steel tray ( medium ) standard product 31 artery forcep standard product rust free 32 dissecting forcep standard product rust free 33 scissor standard product rust free 34 nail cutter & filer standard product rust free 35 splint ( large ) malleable splints, made of aluminium alloy, can bestrapped, x ray compatible, easy to fix 36 splint ( medium ) malleable splints, made of aluminium alloy, can bestrapped, x ray compatible, easy to fix 37 splint ( small ) malleable splints, made of aluminium alloy, can bestrapped, x ray compatible, easy to fix 38 cervical collar ( large ) standard oem with isi / ce certification 39 cervical collar ( medium ) standard oem with isi / ce certification 40 cervical collar ( small ) standard oem with isi / ce certification 41 spine board standard product •tapering from approx. 18 to 14 from head end to foot end. 74.2 long x 3.2 high at height of concave patient surface. • internal padding nonabsorbent, contoured, bevelled edges, adhesive backed, easy for sanitizing and reapplying. 65 x 11.375 x6mm. 42 steel plate standard product rust free 43 steel glass standard product rust free 44 steel bowl standard product rust free 45 spoon standard product rust free 46 steel jug standard product rust free 47 bath tub standard product 48 kidney tray standard product large & small 49 iv stand • 22 diameter chrome plated heavy bar steel base • lock to ensure secured height positioning • twohook rams horn with secure grip tips • based on a four leg stand • height adjustment from 51 1 / 2 to 93 • bottom pole diameter is 1, upper pole diameter is 0.75 50 measuring glass standard product non breakable 51 measuring tape standard product 52 goggles standard product 53 suction apparatus a / c power with collection capacity of 200 ml with 20 litres per minute flow rate. backup for 20 min. provision with manualoperation in case of any power failure 54 syringe destroyer standard oem with isi / ce certification electronicwith cutter. 55 syringesteriliser standard oem with isi / ce certification electronicwith cutter. 56 needle burner standard oem with isi / ce certification electronic withcutter. 57 thermometer standard oem with isi / ce certification electronic withcutter. 58 syringe 50 cc / ml standard oem with isi / ce certification electronicwith cutter. 59 b.p. monitoring machine standard oem with isi / ce certificationelectronic with cutter. 60 hot water bottle as per standard 61 ice caps as per standard 62 transfer forceps as per standard 63 drum as per standard 64 dressing kit as per standard 65 dressing scissor as per standard 66 folley catheter as per standard 67 euro bags standard oem with isi / ce certification 68 ryle’s tube as per standard 69 vaccutanour ( red / black / violet ) as per standard 70 tourniquet as per standard 71 examination table as per standard 72 call bell as per standard 73 rubber sheet / mackintonossh as per standard 74 draw sheet as per standard 75 bandage as per standard 76 suction catheater as per standard 77 bulb syringe as per standard 78 oxygen mask face mask with 2 m long star multi channel tube, size 79 stethoscope double sided aluminium chest piece with matt anodising. it is precisely machined for enhanced performance & durability. it features dual tunable diaphragms with brass chrome plated rings. the larger diaphragm is used for adult patients whereas the smaller diaphragm is used for paediatric patients. 80 towel cotton 81 gown different size 82 gloves ( disposable ) – packet as per standard 83 gloves ( surgical ) – packet as per standard 84 liquid soap bottle as per standard 85 mask – packet as per standard 86 shoe cover packet as per standard 87 hair cap packet as per standard 88 sponge cloth as per standard 89 wet wipes packet as per standard 90 comb as per standard 91 tooth brush as per standard 92 toothpaste as per standard 93 hair oil as per standard 94 shampoo bottle as per standard 95 bath soap as per standard 96 talcum powder as per standard 97 different colour plastic bags with dustbins ( red ) as per standard 98 different colour plastic bags with dustbins ( blue ) as per standard 99 different colour plastic bags with dustbins ( black ) as per standard 100 different colour plastic bags with dustbins ( yellow ) as per standard 101 uro bag t tap type 2000 millilitre 102 sample collection bottle as per standard 103 gauze piece ( 4x4 ) as per standard 104 betadine solution bottle germicide gargle 105 cotton rolls as per standard 106 cotton absorbent supper cotton 107 normal saline bottle as per standard 108 micro pore 9.14 meter ( length on a roll ) without dispenser surgicaltapes 109 spatula to collect pep smear, cytology specimen. 110 hydrogen peroxide bottle stabilized hydrogen peroxide 111 cleaning solution ( colin ) as per standard 112 stationary set multifunctional multi toolkit for office works, stationary organizer | stapler, scissor, punch, ruler, sharpener, opener, remover, ring, clip holder ( all in one kit ) 113 paper ( ream of 500 ) a4 size 114 extension cord with 4 sockets 115 speaker as per standard 116 fire extinguisher 2 kg 117 alcohol based hand sanitizer herbal, alcohol 118 n95 mask capelo with exhalation valve 119 rubber gloves latex water proof hand gloves pairs 120 unbranded steel tool box for basic tools 121 temperature gun noncontact digital infrared thermometer 122 manikin ( male & female ) standard oem with isi / ce certification 123 oximeter finger tip pulse oximeter with spo2, perfusion index andpulse rate readings, oleds display...
47
RAJASTHAN COUNCIL OF SCHOOL EDUCATION - Rajasthan
36124027 supply of medical and surgical related items for cwsn students 1 braille kit 10 braille slate, stylus, english trainer plate, geometry set, taylors frame, type sets, abacus, instruction manuals 2 taking calculator 10 a talking calculator has a built in speech synthesize that reads aloud each number, symbol or operation key a user pressrs; it also vocalizes the answer to the problem. it is a large size calcuator which also has provision for attaching earphones 3 geomrtary kit (blind) 10 kit consistin of a scale aluminum frame compass protractor a circular disk ect. having tactile marking enabling a person with blindness to construct figures accurately. 4 hearing aid two pair 10 type: bte suitable for: mild to moderate maximum power output:135 db spl 5 smart cane 10 an electronic travel aid which fits on top fold of the white cane. enhances white canes capability by detecting objects from knee to head height in front of a person. inbuilt rechargeable battery with 10 hours back up. 6 low vision devices 10 magnifier lenses, gogalss 7 mr kit 10 infinite loop stepping stones massage ball olive massage ball squeezer air cushion 8 daisy player 10 8gb flash storage and also support up to additional 32gb sdhc card high quality speakers guarantees louder and clearer voice; support daisy format : daisy 2.02, daisy 3.0 page 24 of 26 9 chess board for blind 10 brand generic material wood, plastic genre chess number of players 2 item dimensions lxwxh 34.8 x 22.1 x 3.8 centimeters 10 speech trainer (digital) 10 high sound quality with full acoustic energy output. portable lcd screen for navigation digital speech trainer output by headphone and inbuilt speaker visual, audio and tactile modality 11 oto scope 10 special feature battery required, led flash light power and plug description battery powered light source type led material abs included components mini portable fiber optical pen 12 tongue pressure 10 13 group hearing aid 10 headphone output (students unit) headphone impedance operating power (230 v ac) dimensions/weight teachers unit 14 walker 10 walker height can be adjusted from 62 cm to 70 cm from the ground to the walker hand grips. sturdy aluminum frame, high grade rubber shoe and rubber foam grip ensures maximum strength while remaining lightweight. it comes with rotating wheels for easy movements 15 wheel chair 10 type manual wheelchair seat type solid seat wheel type cast plastic wheel tyre type pneumatic arm design type full length arms backrest type fixed wheel lock type lever weight carrying capacity 100 kg foldable seat yes page 25 of 26 16 c.p. walker 10 type – c.p walker for kids square adjustable ring to hold the child in an upright position adjustable square ring 14” x 14” square ring adjustable height 22” to 30” overall length 24” overall width 22” overall height 32” wheel type 4 caster wheel of 2” frame 22 mm circular pipe of 18 gauge 17 c.p. chair 10 material: aluminium alloy overall height: 86 111 cm weight: 3.5 5 kg 18 white cane (foldable) 10 colour: white, black top bottom material: industrial grade aluminum elastic: double elastic with 3mm pure white for greater strength. unique joint design: connecting bushes for smooth functioning, great stability, and toughness foldable: yes, folding with 5 segments powder coating: high quality, fine surface finish size: 1150 mm length, 12.7mm diameter weight: 170g included components: whitecane 19 taking dictionary 10 talking dictionary software is a enabled english dictinary and thesaurus.like all tha talking software product talking dictionary has been disigned for use by the non sighted person.all of the controls are easily rememberd keyboard shortcuts and it is a very fast and easy programeto use .talking dictionary is designed to be usesd as a stand alone programe. what this means is that you do not need any kind of skreen reading softwarw or any thing else to use this programe 20 refreshable braille display 10 the braille me is a new smart braille display by innovision tech. this refreshable braille display is a 6 dot, 20 cell display with a perkins style keyboard that can be paired with ios and android devices, and has a micro usb, sd card slot and dc jack. this lightweight (1.3 lbs) device is compatible with voiceover, brailleback and nvda screen readers and supports 50+ languages. page 26 of 26 21 digital protbale audio meter ...
48
Department Of Defence - Rajasthan
35981320 bids are invited for miscellaneous items fan hook 5 inch , pvc pipe inch dia 10 feet long , pvc pipe 15 mm dia 10 feet long , pvc bend inch dia , pvc bend 1 inch dia , insulation tape 30 mtr x20 mm , balli hard wood size 3 inch to 6 inch dia 10 feet long , aluminium alloy straight 06 steps ladder, load cap 150 kgs , aluminium alloy straight 08 steps ladder, load cap 150 kgs , 04 step heavy duty foldable aluminium ladder , helmet grease gun 10 kgs cap , hyd jack 10 20 ton cap , battery charger 72 v , hand operating rotary pump for lifting of pol , measuring cane 10 ltrs cap , measuring cane 05 ltrs cap , ms pipe 1.5 inch dia 2 mm wall thick , ms sheet size 6 feet x 4 feet x 1 mm , ms wire 6 mm dia , sealing wire 0.8 mm dia , round lead seal 12 mm dia , lead sealing plier engraved with 1071 mark , dewatering pump set 05 hp with deisel engine drive, npsh 06 meter, suction and delivery in mm80 x 65, rpm 1500, total head 18 meter , microtek line interactive ups 1000 va with avr with 02 year warranty total quantity : 2018...
49
Military Engineer Services - Rajasthan
35865736 tender for repair and maintenance of misc b / r and e / m nature work in area under age ( i ) pokaran taking down carefully by unscrewing from boards / outlet boxes, switches, bell push, socket outlets, fan regulators, buzzers, holder and taken as schedule of credit. 2 disconnecting and removingthe mcbs, mccbs, dbs, metal clad switch from any height , stripping out the fitting for examine replacement of unserviceable spare parts, reassembling, refixing in original position includingminor repairs for the smooth functioning and testing complete all as specified & directed by engg in charge 3 m&l for attending, repair and rectification ofany type of internal elect supply complaint viz light point / fan point / 5 / 15 amps switch socket / submain wiring / mcbs / dbs / no electric supply on 230v / 415v system along with necessary t&p, safety devices, without replacement of items as per site requirement and as directed by engr in charge.note :1.the contractor shall detail / depute his supvr / electrician to receive the complaints from the concerned complaint cell and rectify the same on the given day alongwith necessary manpower and t & p as required.after completion of the complaints attended, the docket / slips shall be handed over to the concerned complaint cell.2. the cost of the stationery such as complaint register and docket book shall be deemed to be included in the rate quoted. 4 s & fswitch piano single pole flush type 5 amps, 230 volts. 5 s & fswitch piano single pole flush type 15 amps, 230 volts. 6 s & f single pole modular switch 1 way 6 amps, 1 module 7 s & fsingle pole modular switch 1 way 16 amps, 1 module 8 s&fbell push 5 a flush type 9 s&f modular bell push 6a, 1 module 10 supply and fixsocket outlet modular type multipurpose 2 / 3 pin, 6 amps, 230 volts combined 2 module 11 supply and fixsocket outlet modular type multipurpose 3 / 5 pin, 6 / 16 amps, 230 volts combined 2 module 12 supply and fixsocket outlet flush type multipurpose 2 in 1, 3 pin, 5 amps, 230 volts all as specified 13 supply and fixsocket outlet flush type multipurpose 2 in 1, 3 pin, 5 / 15 amps, 230 volts all as specified 14 s & fswitch socket combination flush type multipurpose 2 / 3 pin 5 amps 2 in 1230 volts all as specified. 15 s & fswitch socket combination 5 in 1 multipurpose 3 / 5 pin 5 / 15 amps flush typewith complete all as specified. 16 s & fmodular ceiling fan regulator stepped socket size ( modular ) suitable to work on 230 volts complete all as specified, 2 module 17 s & felectronic type regulator single module stepped heavy duty for ceiling fan suitable to work on 230 volts complete all as specified. 18 s & f electronic type regulator two module stepped heavy duty for ceiling fan suitable to work on 230 volts complete all as specified. 19 s&fbell ( buzzer / ding dong ) working on 230 volts ac supply 20 s & f lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings 21 s & fwall mounted 2 ft led batten of 9 watt with led lamp, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete including taking down all as specified and directed by engg in charge. make : havells cat part no luminebs9wled865spcwh / bajaj cat part no. bclsb10nw or equivalent. 22 s & f 4 ft box type tube light fitting with led tube rod of 18 / 22 watt , extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete including taking down all as specified and directed by engg in charge . make : havellscat part no regalbatten8upto1x22wssbswh and crystal1213t8dstl20wled865sglass / luker cat part no.llts1 or equivalent 23 supply and fix 4ft led tube rods of 18 / 20 / 22 watt complete including taking down all as specified and directed by engg in charge make: havells cat part no. crystal1213t8dstl20wled865sglass / bajaj cat part no.18wcdl orequivalent 24 s & f security lights of 1x25 watt led light with high power led and unique peanut lens to ensure uniform distribution and including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all including taking down as specified and directed by engg in charge.make : havells cat part no endura pearl sl25wled757sasytopcmp / luker cat part no lst24 or equivalent 25 m & l bracket made out of gi pipe of suitable dia not less than 1.2 mtr long and fixed on walls with 2 nos ms clamps made out of ms flat of suitable size thick complete with ms nuts, bolts and washers etc bent to required shape complete including taking down all as specified and directed by engr in charge 26 s & f 15 watt recess mounted circular downlight with white powder coated polycarbonate housing and pressure diacast , heat sink having high efficiency and including taking down all as specified and directed by engr in charge make : havells cat part no enduraneodlr15wled840mod and analogdrivernm12 / 15w / crompton cat part no.scr 15w cdl orequivalent 27 s & f 15 watt surface mounted circular downlight with white powder coated polycarbonate housing and pressure diacast , heat sink having high efficiency and all including taking down as specified and directed by engr in charge. make : havells cat part no enduraneohesurfacedls15wled840s / crompton cat part no. lcdspln r 12 ww or equivalent 28 s & f 24 watt recess softline luminaire ( 1x1 ) suitable for armstrong / grid ceiling with high brightnesswhite leds and pmma extruded diffuser giving glare free light and good aesthetic appeal and all including taking down as directed by engg in charge. make : havells cat part no pluto 1x1 plr15wled857s / crompton cat part no. ccr 141 24 57 sl nwh or equivalent 29 all as per sl item no 49. here in before, but 2x2 fittings of 45 wattsincluding taking down all as specified and directed by engr in charge. make : havells cat part no venus neo he 2x2plr42wled857mod , leddriver63v1a42ws / crompton cat part no.ccr 126 50 40 sl nwh or equivalent 30 s & f 10 watt bulk head luminaire suitable for outdoor with high brightness giving glare free light and including taking down all as directed by engg in charge. make :havels cat part no. hexaft10wled857ssymbopc / bajaj bibwp10wled or equivalent 31 s & f mcb sp 6 to 32 amps 240 volts for fixing on mcb dbsall as specified. 32 s & f mcb sp40 to 63 amps 240 volts for fixing on mcb dbsall as specified 33 s & f mcb spn 16 to 32 amps 240 volts for fixing on mcb dbsall as specified 34 s & f mcb spn 40 to 63 amps 240 volts for fixing on mcb dbsall as specified 35 mcb four pole, 415 volts suitable for fixing in mcb db of capacity63 amps including removing the existing us one and making good the distrubed surface to match with the existing surface. 36 mcb four pole, 415 volts suitable for fixing in mcb db of capacity100 amps including removing the existing us one and making good the distrubed surface to match with the existing surface. 37 s & f sheet metal enclosure mcb dbspn 4 way with 200 amps rated bus bar 240 volts double door with locking system complete all as specified 38 all as per sl item no 37 here in before, but spn 8 way db 39 all as per sl item no 37 here in before but spn 12 way db 40 s & f horizontal type tpn db 4 way double door made out of crca sheet housing duly powder coated & confirming to is specification complete all as directed by engr in charge. 41 s & f vertical loadline type tpn db 4 way double door with incoming as mccb tp 415 volts ac 3 phase50 hz with fixed magnetic setting for current rating of 100 amps 16 ka ( mccb tp confirming to is specification made out of crca sheet housing duly powder coated & confirming to is specification complete all as directed by engr in charge. 42 s & f single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole mcb 20 amps ( ac box ) all as specified and directed 43 s&f mccbs 415v, 25ka, 100 amps 4 pole suitable for db including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface. 44 all as per sl item no 43 here in before, but 63 amps, 10 ka 45 m & l submain wiring with 2 runs of single core 4 sqmm pvc insulated frls multistranded 1100 volts grade wire, copper conductor drawn through and including non metalic rigid pvc conduit and conduit accessories of medium grade not not less than 25mm dia including one run of single core 4 sqmm pvc insulatedsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from db to db / main board including removing the existing unserviceable submain riwing complete all as specified and as directed. 46 all as per sl item no 45, but 2 runs of single core 6 sqmm and one run of single core 6 sqmm as earth continuty conductornote :for sl item no 66 to 67: two runs of cable, one run of earth wire and one run of pvc conduit will be measured as one unit 47 supply and fix 36 watt cfl 4 pin typecomplete all as specified and directed by engg in charge. 48 supply and fix 18 watt cfl 2 pin typecomplete all as specified and directed by engg in charge. 49 supply and replace electronic driver fordownlight of any capacity / watt as per site required all as specified and directed by engineer in charge. 50 supply and replace electronic driver for led light of2x2 fittingof any capacity / watt as per site required all as specified and directed by engineer in charge. 51 supply and replace bi pin holdersuitable for 40 / 28 watts tubes ( pin & screw type ) 52 supply and replace cfl holdersuitable for 2 / 4 pin for 9 to 36 watts 40 / 28 watts tubes ( pin & screw type ) 53 supply and replace fan condenser 2.5 mfd 54 supply and replace fan condenser of 4.00 mfd 55 supply and replace split pins / lock pins for ceiling fans 56 supply and replace ms clamp with rubber bushes, bolts & nuts for ceiling fan along with lock pin all as specified 57 m & l for repairs to copper inner container like denting, soldering, brazing, leak testing and reassembling of any ltrs capacity water heater ( geyser ) complete all as specified. 58 supply and replace geyser element2000 watts of any type or as per site requirement 59 supply and replace thermostat 60 supply and replace indicator bulb 230 v suitable for any make and colour. 61 supply and replace pvc cold / hot water connection pipe 45 cms long 15 mm dia 62 m & l rewinding of burnt ceiling fan of1200 / 1400mm sweep motor with supper enameled copper wire of suitable size including repainting it white , replacement of sealed bearing and shaft of any make, type, model incl transportationcomplete all as specified and directed by engineer in charge. 63 m & l rewinding of burnt exhaust fan of 225 / 300mm sweep motor with supper enameled copper wire of suitable size including repaintingas per site requirement, replacement of sealed bearing and shaft of any make, type, model incl transportationcomplete all as specified and directed by engineer in charge. 64 s&f ceiling fan downrod of required heightincluding drilling of holes and threads for the same as per the site requirement all as direted by engineer in charge. 65 s & f ceiling rose three terminal surface bakelite type ac 50 hz 230 volts of size 65 x 50 mm complete all as specified. 66 supply and replace pvc round blocks 67 supply and replace pvc dummy sheets circular type of 4 68 supply and replace pvc dummy sheets circular type of 6 69 supply and replace rigid pvc casing & capping 20 / 25 mm wide 70 supply and replace pvc rectangular box ( gang box ) with 5 amps switch socket 71 supply and replace pvc rectangular box ( gang box ) with 5 / 15 amps switch socket 72 supply and replace pvc wire of flexible cord with copper conductor multistanded of twin core 23 / 0.198sqmm 73 supply and replace pvc insulated frls copper wire of size 1.5 sq mm multistranded 1100 volts grade 74 supply and replace pvc insulated frls copper wire of size 2.5 sq mm multistranded 1100 volts grade 75 supply and replace pvc insulated frls copper wire of size 4.0 sq mm multistranded 1100 volts grade 76 supply and replace pvc insulated frls copper wire of size 6.0 sq mm multistranded 1100 volts grade 77 supply and replace service wire twin core of 10.0 sq mm multistranded 1100 grade 78 supply and replace plug top 5 amps 3 pin 250 volts 79 supply and replace plug top 15 amps 3 pin 250 volts 80 supply and fix white hylam plain laminate sheet ofthickness as per the site requirement and as directed by engr in charge. 81 repair / maintenance of 25 ltrs ro plant of any make by removing of all electrical connections and water connections, rectification of all electric complaints including replacement of wiring and cleaning of all filters all as specified by engr in charge 82 s&f filters of 25 ltrs ro plant all as specified and directed 83 taking down chowkats or frames with shutters ( w / o taking of shutters from the frame ) exc. 1.5 sqm but n.exc. 4 sqm & removing from site. 84 taking down chowkats or frames with shutters ( w / o taking of shutters from the frame ) area n. exc 1.5 sqm removing from site 85 taking down shutter of any description and removing frome siteexc. 1 sqm & n. exc. 2 sqm each leaf. 86 taking down shutter of any description and removing frome siten exc. 1 sqmeach leaf. 87 m&l for joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. ( cut to ordinary lengths i.e. within 20mm of the length indicated ) fe 410 w ( gde e 250 ) quality a 88 s&f 35mm thick plain framed, panelled shutter ( two panel ) with lock rail and panel of 9 mm b.w.p commercial ply or 12 mm veneered particle board with commercial veneering on both faces. the size of rail and stile as per is: 1003 ( part i ) , kiln seasoned and chemically pressure treated 89 supply and fix flush shutter solid core construction with block board core and plywood face panels commercial typeboth side, 30mm thick. 90 s / f 2nd class h.w. skeleton shutter 35 mm thick open rebated & prepared to receive glass, gauze, etc. divided into squares with plain chamfered or rounded & rebated sash bars ( of any nos ) as spd in ssr pt i sec 8 cl. 8.20. ( a ) . 91 s&f solid pvc door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with m.s square tube, supplying & fixing in opening as per specification & drawing 92 s&f factory made solid panel pace door shutter 30mm thick ( style ) consisting of frame made out of m.s. tubes for top & bottom rails, m.s. frame shall be covered with heat moulded plain colour pvc `c channel heaving a pvc sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour pvc sheet to be fitted in the m.s frame wedded / sealed to the stiles, & rails with suitable pvc sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. 93 steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded 94 steel ventilator with top hung shutter including hinges, steel peg stay, complete 95 s&f 4 mm thick sheetglass ordinary quality and glazingwith oilputty in squaren exc 0.50 sqn in each pane. 96 s&f 4 mm thick figured glass, pin headed type and glazingwith oilputty in squaren exc 0.50 sqn in each pane. 97 resecuring or easing & adjusting, taking down shutters of any description n exc 1 sqm each refixing in same opening 98 resecuring or easing & adjusting, taking down shutters of any description exc 1 sqmn exc 2 sqm each, refixing in same opening 99 s&f 100 mm long mild steel but hinges medium weight cold rolled. 100 s&f in repairs 100 mm long mild steel but hinges medium weight colld rolld. 101 s&f 150 mm long aluminium anodised barrel tower bolt of extruded section. 102 s&f in repairs150 mm long aluminium anodised barrel tower bolt of extruded section . 103 supply and fix 150mm long extruded aluminium alloy handles, 150mm long fabricated type., anodised 104 supply and fix in repairs extruded aluminium alloy handles, 150mm long fabricated type., anodised 105 s&f 300 mm long aluminium alloy anodised sliding door bolt with hasp staple ( bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alu allow. 106 s&f in repairs 300 mm long aluminium allow anodised sliding door bolt with hasp staple ( bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alu allow. 107 s&f stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples 108 supply & fix in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples 109 supply and fix in repairs floor door stopper of aluminium body and tongue anodised with hard drawn steel spring fixed in floor over all length of cover plate 150mm. 110 supply and fix repairs decorative type curtain rod , stainless steel, 25 mm dia with not less than 1mm wall thickness complete all as specified and directed. 111 supply and fix decorative type brackets , stainless steel, suitable for above curtain rod complete all as specified and directed. 112 hacking out old broken glass ( any thickness, size, quality or description ) frommetal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones 113 s&f 3 mm thick sheet glass ordinary quality & glazing with oil putty in squares n. exc. 0.5 sqm in each pane. 114 s&ffigured glass 3 mm thick, pin head type & glazing with oil putty in squares n. exc. 0.5 sqm in each pane 115 prelaminated particle board, interior grade, prelaminated both side 18 / 19 mm thick with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work but prelaminated both sides with decorative choice laminations 116 s&f continuous ( piano ) hinges, mild steel, bright finish or electro galvanizedwidth of flaps ( when open ) 30 mm. 117 m&l iind class hard wood plain fillets, square, rectangular or triangular in section, clean swan, se cured with nails or brads, sectional area not exc 3.00 sqcm. 118 s & f aluminium anodised hasp and staple 75mm , safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws 119 s&f 100 mm long aluminium anodised barrel tower bolt of extruded section . 120 supply and fix extruded aluminium alloy handles, 100 mm long fabricated type., anodised 121 s&f, anodised aluminium frame & shutter for door, window and ventilator including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, hinges, tower bolt, etc complete all as specified & directed by engineer in charge. 122 supply only 5.5 mm thick sheet glass, selected quality, in square exc 0.5 sqm each pane including solar control film 25 micron reflective type over it. 123 supply only 5.5 mm thick sheet glass, selected quality, in square nexc 0.5 sqm each pane including solar control film 25 micron reflective type over it. 124 s&f door closer ( aluminium extuded body section ) hydreulically regulated, , designation no 1 universal type, suitable for door shutters up to 700mm in width and of wieght not more than 35kg complete all as directed. 125 s&fmild steel 4 lever mortice lock, vertical type of size 100mm all as directed. 126 dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) , removing serviceable tiles to store and rubbish off the premises 127 m&l for colored non skid ceramic tiles 7 to 8 mm thick ( square / rectangular ) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match, including 15 mm thick screed bed or bedded layer in cement mortar 1:6 for laying floor finish. 128 m&l for colored glazed ceramic tiles ( 300mm x450mm ) x 7 mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or colored cement to match including 10 mm thick plaster in cement mortar ( 1:4 ) on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing to receive / fixing dado / skirting tile. 129 dismantling of stone slab in any description or thickness, laid bedded jointed in any morter. 130 material and labour for granite ( of any type ) 18 to 20 mm thick work ( table rubbed and polished ) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar ( 1:4 ) including pointing in white cement ( 1:2 ) using marble dust with admixture of pigment to match withshadeincl 15mm thick screed bed in cm 1:6 complete. 131 drilling holes for bolts, pipes, etc. n. exc 25mm dia in granite or trape stonefor gas connection pipe 132 rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations 133 s&f vitreous china coloured wash hand basin 580mm x 450mmfixed in repairs including 15 mm pillar cock cast copper alloy cp, 15mm cast copper stop valve, 32 mm brass cp waste fitting & 15 mm pvc connection pipe 450 mm long fixed in repairs 134 s&f vitreous china wash down water closet coloured pan ( pedestal pattern ) , white ( excluding fixing bolt, flushing cistern and flush pipe ) complete connected to drain fixed in repair 135 supply and fix in repairs vitreous china squatting pan, ‘orissa’ pattern, size 580 x 440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe ) 136 s&f in repairs plastic water closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminum hinging device 137 s&f pvc flushing cistern 10 ltrs capacity isi marked incl pvc down take pipe and connection etc all complete in repairs. 138 supply and fix in repairs vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white ( minimum ) , with grating and union ( exclusive of fixing supply pipe to flushing cistern, trap and waste pipe ) fixed in repair 139 s&f for stop cock copper alloy cp screwed down high pressure with crutch or butterfly handle screwed both ends for iron / pipe or for union and fixed 15 mm bore in repairs 140 s&f bib taps cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs 141 s&f in repairs cp health faucet spray with 1.5m long pipe with wall hook& fixed in repair complete 142 supply and fix in repairs bib taps two way type , cast copper alloy with crutch or butterfly handle, sc rewed down, screwed for iron pipe or for brass ferrule 15 mm boreand fixed 143 s&f in repairs 32mm dia pvc waste pipeforkitchen sink , whb , urinal etc 144 supply and fix 15mm bore pillar taps of cast copper with capstan head cp screwed down high pressure with or without lettered hot and cold with long screwed shank and fly nut for iron pipe and fixed in repairs 145 s&f in repair brass cp mixer for mixing hot & cold water screwed down for iron pipe and fixed 146 s&f pvc connections 15 mm size with ptmt nuts to length 450 mm in repairs. 147 s&f , brass, chromium plated, tubular towel rail, 20mm dia, d type, 60cm long between flanges 148 s&f in repairs soap dish, any type, fixed to plugs with chromium plated brass screws 149 supply and fix in repairs brass chromium plated shower roses 125mm sizewith or without swivel joints, any size, including fixing to steel pipe or union 150 s / f s s grating dome of 100 mm dia ( min wt 25 gms ) to floor traps in repairs. 151 s & f 600mmx450mm beveled edge mirror of selected quality glass, mounted on 6mm thick ac building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers 152 taking down steel tubing and connections including cleaning for re fixing or removal to store of 15 mm bore 153 taking down steel tubing necessary fittings connection etc for 20 mm bore pipe 154 cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth 155 s&f gi tubes of medium grade with all fitting and fixed complete to walls and ceilings or laid in floors of 15 mm dia 156 s&f tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floors 20 mm dia 157 supply and fix pvc ( swr ) floor trap, plain with grating including jointing with solvent cement 75 mm dia out let 158 s&f in repair pvc ( swr ) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm dia 159 s&f in repair pvc ( swr ) pipes single socketed in any length with rubber ring joints fixed to walls 75 mm dia 160 supply and fix in repairs ball valves high pressure of ptmt with epoxy coated aluminium rod and highdensity plastic ball screwed for iron pipe and fixed in repairs of pipe 15 mm dia. 161 supply and fix in repairs ball valves high pressure of ptmt with epoxy coated aluminium rod and highdensity plastic ball screwed for iron pipe and fixed in repairs of pipe 20 mm dia. 162 supply and fix in repairs 15 mm dia bib tap standard of ptmt any colour high pressure screwed for iron pipe and fixed . ( minimum weight 15mm 90gms / 20mm 125gms ) 163 supply and fix in repairs 15 mm dia pillar taps of ptmt any colour high pressure screwed for iron pipe and fixed ( minimum weight 15mm 110gms ) ) 164 supply and fix in repairs 15 mm dia stop valve of ptmt any colour high pressure screwed for iron pipe and fixed ( minimum weight 15mm 90gms / 20mm 112gms ) 165 s&f in repairs sinks made of stainless steel of 1 mm thick kitchen sink with plug washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 x 420 mm bowl size 410 mm x 330 mmx 160 mm 166 s&f in repair sinks made of stainless steel 1mm thick in kitchen sink with plug washers and waste pipe including bedding in cement mortar to dwaft wall or incl fixing cantilever brackets and connecting unionto pipe over all size 915 x 460 mm bowl size 410mm x 330 mm x 160mm all as specified and directed. 167 dismantling water tanks & removing from site, capacity of tanks exc 250 litres & n. exc. 500 litres capacity each 168 dismantling water tanks & removing from site, capacity of tanks 500 ltr and n exc 1000 ltr 169 s&f rotational moulded polyethelene water storage tanks ( cylindrical, vertical with closed top ) hoisted & fixed in position all as specified in ssr pt i, 500litre capacity. 170 s&f rotational moulded polyethelene water storage tanks ( cylindrical, vertical with closed top ) hoisted & fixed in position all as specified in ssr pt i, exc 1000 ltr capacity...
50
Indian Army - Rajasthan
35791200 bids are invited for 1 g1 5305 002681 screw wood slotted csk head mild steel n 2 g1 5305 002673 screws wood slotted countersunk head mil 3 g1 5325 000169 eyelet aluminium alloy no.28 4 g1 5305 002699 screw wood slotted csk head mild steel n 5 g1 5305 002713 screw wood slotted csk head mild steel n 6 g1 5305 002686 screw wood slotted csk head mild steel n 7 g1 5305 002700 screw wood slotted csk head mild steel n total quantity : 25391...